GovChime
Notice ID: 23eb82453e464a86b713610d7093c0b2Award NoticeAwarded

Cryogenic X-Y-Z Positioner

Awarded on July 15, 2024. Full description on SAM.gov.

Awarded tounder 1333ND24PNB670258 (source: SAM.gov award notice)• $65.0K

Overview

Posted
July 15, 2024
Notice type
Award Notice
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
Department of Commerce

Notice details

Last updated
Dec 4, 2025
Award date
Jul 15, 2024
Award amount (SAM.gov award notice)
$65.0K

Identifiers

Solicitation number
NB672030-24-01287
Notice ID
23eb82453e464a86b713610d7093c0b2
Award number (PIID)
1333ND24PNB670258

Description

THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN SUBPART 12.6, AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED AND A WRITTEN SOLICITATION WILL NOT BE ISSUED. THE EVALUATION PROCEDURES OF FAR PART 13.106- 2 SHALL BE UTILIZED FOR THIS PROCUREMENT. THE SOLICITATION SHALL NOT BE SUBJECT TO THE FORMAL SOURCE SELECTION PROCEDURES DESCRIBED IN FAR PART 15. Solicitation number NB672030-24-01287 is a Combined Synopsis/Solicitation request for quote (RFQ) conducted under FAR 12.6 and 13.106. Procedures from FAR 15 will not be used. Please acknowledge receipt of this RFQ. This RFQ, incorporated provisions, and clauses are those in effect through Federal Acquisition Circular (FAC) 2024-03. The associated NAICS 334516 - Analytical Laboratory Instrument Manufacturing has a small business size standard of 1000 employees. This requirement for a commercial item is an unrestricted competition. Defense Priorities and Allocations Systems (DPAS) and assigned rating is not applicable to this request for quote (RFQ). Offerors must submit all questions concerning this solicitation in writing, via email, to the Contracting Officer, Clifford Nicholson at clifford.nicholson@nist.gov and Daniel Kent at daniel.kent@nist.gov. Questions should be received no later than five (5) calendar days after the issuance date of this solicitation. All responses to the questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, the question responses included in the amendment to the solicitation will govern performance of the contract. The solicitation will close on the date and time specified herein this SAM.gov posting. All quotations shall be delivered electronically by the specified close date and time to Clifford Nicholson, Contract Officer, at clifford.nicholson@nist.gov, and Daniel Kent, Contracting Officer, at daniel.kent@nist.gov. For information regarding this solicitation, contact the Contracting Officer at clifford.nicholson@nist.gov or via phone at 303-497-5185. Attached is the REQUIREMENTS/SPECIFICATIONS document describing the requirements for solicitation NB672030-24-01287 for the following line-item number(s) (CLINs) to include description of item(s), quantities, and units of measure (including any applicable option(s)). All offerors shall provide a firm fixed price (FFP) quotation for the following line items: (All equipment must be new. Used, refurbished, prototype, or remanufactured will not be considered for award). Item Number Supplies/Services Description Quantity Unit of Issue Unit Price Amount 0001 Cryogenic x-y-z Positioner 1 EA $ $ 1001 Cryogenic x-y-z Positioner 1 EA $ $ This shall be provided in accordance with the Specifications Document attached herein. Total Value: $ $ A Description of the requirements for the items to be acquired are in the attached Requirements/Specifications document. ***See Attached RFQ for detailed instructions.***

Full description on SAM.gov

Award Overview

Award Number

1333ND24PNB670258

Award Amount (SAM.gov award notice)

$65.0K

Award Date

Jul 15, 2024

Awardee

Awardee UEI

Q9BGGQ9MR4G9

Original Solicitation

Notice ID: 23eb82453e464a86b713610d7093c0b2

Posted Date: Jul 15, 2024

Original Response Deadline: Not specified

More From This Vendor

Top 5 most recent

2
  • 1333ND26PNB680218
    RENAISSANCE SCIENTIFIC, INC.
    Department of CommerceNAICS 334516
    $178.5KSigned Nov 6, 2026
  • 1333ND26PNB680218
    RENAISSANCE SCIENTIFIC, INC.
    Department of CommerceNAICS 334516
    $178.5KSigned Aug 25, 2026

Contacts

Documents

No documents available.

Lifecycle

Solicitation:NB672030-24-01287
  1. Combined Synopsis
  2. Awarded

This opportunity has been awarded.

  1. Combined SynopsisMay 1, 2024

    Cryogenic X-Y-Z Positioner

    Notice 2e912d1a3c654680bb53ca38917e60a8 on SAM.gov

  2. AwardedCurrentJul 15, 2024

    Cryogenic X-Y-Z Positioner

    Notice 23eb82453e464a86b713610d7093c0b2 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
-Market Research11/20/2026
Sources Sought Notice for Graphite Furnace Atomic Absorption Spectrometer Notice ID: NIST-MML-FY27-SS01 Response Date: 11/28/2026 Product Service Code (PSC): 6640 NAICS Code: 334516 Background The Inorganic Chemical Metrology Group (ICMG) uses at least two measurement methods, each based on orthogonal physical principles, to certify the trace elements in candidate standard reference materials (SRM). These SRMs are intended for method validation and quality assurance in trace-element measurements to assess the nutritional value and contaminant status of agricultural products. A sensitive trace-element detector, a graphite furnace atomic absorption spectrometer (GFAAS) is sought to complement the group's inductively coupled plasma mass spectrometric (ICP-MS) measurement capability and fulfill the two independent method requirements for SRM development. Consideration will be given to GFAAS capable of direct solid-sample analysis to maximize its orthogonality relative to the liquid-sampling-based ICP-MS technique. Minimum Capabilities that NIST Requires and for Which Information is Being Requested The National Institute for Standards and Technology (NIST) located in Gaithersburg, MD is seeking information on vendors that are capable of providing a graphite furnace atomic absorption spectrometer (1) capable of measuring liquid test samples with an instrument detection limit (DL) for Cu at 0.02 µg/L or better (324.8 nm line, 50 µL sample volume, DL=3 x standard deviation of 10 replications) and (2) designed for direct introduction of solid state test samples into the graphite furnace for analyte quantification without a need of sample digestion Instructions for Responding to This Notice Parties that respond to this Notice are requested to submit the requested information via email in Microsoft Word, Adobe PDF, and/or Microsoft Excel format to the designated point(s) of contact whose name and email address appears at the bottom of this notice. Please provide only the information requested by this Notice, and do not include proprietary, classified, confidential, or sensitive information in a response to this Notice. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Information Requested in Response to This Notice: To help NIST with its market research, NIST is requesting that industry sources carefully review this notice and any attachments to it and voluntarily provide the following information: Company Summary Notice Identification: Notice ID and Title of this posting. Corporate Details: Company name, physical address, website address, and Unique Entity Identifier (UEI). Point of Contact (POC): Name, phone number, and email address. Company Size Standard: Your company’s size status relative to the NAICS code provided in this Notice. (Refer to the SBA Table of Small Business Size Standards). System for Award Management (SAM) Registration: Indicate whether your company has an active registration for procurement purposes in SAM.gov. Review the information included with this Notice, indicate whether there is anything that may inadvertently exclude domestically manufactured (made in the U.S.A.) end products from being considered; and indicate if anything included with this Notice could potentially be revised to improve the ability for domestic (“Made in America”) end products to be considered; and if a domestic end product is not currently available to meet the draft requirements/minimum specifications, please provide an estimated timeframe for when it may be domestically produced in the USA in the future if that appears to be likely. Information Regarding Commercial Products and Related Commercial Services Provide specifications, company name of the original equipment manufacturer, and the country of manufacture for commercial products and/or commercial services that your company is legally authorized to sell and that may meet NIST’s minimum requirements. Standard Commercial Pricing: Provide your company’s standard commercial pricing information for the requirements described in this Notice (including any Attachments) and explain what is included in those standard commercial prices. Estimated Price Range: You may provide an estimated price or estimated price range for the draft requirements included in this notice, including a brief explanation of how it was derived. Standard Commercial Terms and Conditions: Provide a copy of the standard commercial terms and conditions for the commercial products and/or commercial services identified in your company’s response to this Notice, including the nature and the duration of applicable standard commercial warranty(ies). Regulatory and Supply Chain Compliance Indicate whether your company could comply with RFO FAR clause 52.219-14 (Deviation JAN 2026) if this acquisition were to be set aside for small businesses (assuming that there is no waiver to the Nonmanufacturer Rule for the applicable NAICS code). Provide a brief supporting explanation. Existing Governmentwide Contract Vehicles Indicate whether your company has its own GSA Multiple Award Schedule (MAS) contract or other federal contract vehicle(s) under which NIST could award an order and, if so, provide the details of the contract(s) (contract number, Contracting Officer name/contact, SOW, terms and conditions, and price lists). Important Notes This Notice does not obligate the Government to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the chosen acquisition strategy. Responses received after the closing date for this Notice may not be considered. There is no solicitation available at this time. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.
-Market Research11/28/2026
-Market Research12/05/2026
-Market Research12/03/2026
Answers to Questions attached. Questions are due by 11:00 AM Monday, 16 November 2026. The proposal due date has not been extended.
-Solicitation11/23/2026

Additional Details

Solicitation Number

NB672030-24-01287

Archive Date

Jul 30, 2024

Office Address

GAITHERSBURG, MD, 20899