GovChime

NOTICE OF INTENT-Silicon Sublimation Source

Overview

Response deadline
5:30 PM UTC−06:00
Posted
July 6, 2023
Notice type
Special Notice
NAICS
325998: All Other Miscellaneous Chemical Product and Preparation Manufacturing
Agency
Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY

Notice details

Office
DEPT OF COMMERCE NIST
Place of performance
Gaithersburg, MD, 20899
Last updated
Sep 9, 2025

Identifiers

Solicitation number
NB683110-23-02326
Notice ID
fed92ecc441f417c8494a5173720a3ea

Description

The National Institute of Standards and Technology (NIST) Acquisition Management Division intends to negotiate with United Mineral & Chemical Corp, located in Lyndhurst, NJ, on a sole source basis under the authority of FAR Subpart 13.106-1(b), soliciting from a single source, for a Silicon Sublimation Source. Specific Requirements are as follows: The specific requirements are: Minimum Requirements: The Contractor shall provide one (1) silicon sublimation source that meets the following specifications: The source must be equipped with an intrinsic silicon filament. The source must have preheating mechanisms to enable intrinsic silicon filament sublimation. The source shall have high purity single crystal silicon shields that cover all metallic parts that face the target substrate. The source shall be capable of operating at deposition/growth rates lower than 2 Angstroms per minute. The source shall be equipped with a water-cooled shroud to dissipate heat and protect the UHV system from silicon coating. The source shall be equipped with a shutter. The source must be UHV compatible (<5 x 10-11 Torr materials). The source shall be able to withstand at least 200 degrees Celsius during vacuum processing. The combined source and water-cooled shroud shall be equipped with a 4.5 outer diameter CF flange to be mounted on a UHV system. The source shall include a thermocouple to measure the temperature of the sublimation cell and calibrate sublimation flux. This shall be provided and accomplished in accordance with these specifications. NAICS Code is 325998 All Other Miscellaneous Chemical Product and Preparation Manufacturing, with a Size Standard of 500 employees. NIST anticipates negotiating and awarding a firm-fixed-price purchase order to United Mineral & Chemical Corp for this requirement. Interested parties that can demonstrate they could satisfy the requirement listed above for NIST must clearly and unambiguously identify their capability to do so in writing on or before the response date for this notice. This notice of intent is not a solicitation. Information submitted in response to this notice will be used solely to determine whether competitive procedures could be used for this acquisition. If competitive procedures are not used it is estimated that an award will be issued by 7/30/2023. Any questions regarding this notice must be submitted in writing via email to angela.hitt@nist.gov. All responses to this notice of intent must be submitted to angela.hitt@nist.gov no later than the date and time provided herein this posting. JUSTIFICATION FOR OTHER THAN FULL AN OPEN COMPETITION: Market research resulted in United Mineral & Chemical Corp being the only vendor that can supply this product. However, United Mineral & Chemical Corp has a higher deposition rate and as a result, less flux control capability, and is not suitable for our application. NIST requires a silicon cell that can be heated by direct current to produce silicon sublimation which can provide an extremely low deposition rate and therefore excellent flux control. It is important to have high purity Si shielding parts that cover all the metallic parts of the evaporator that are facing the target substrate and that are subject to high temperature and ion/electron bombardment. Additionally, NIST uses the exact same equipment (SUSIs) on several other similar STM setups in NIST labs, and have tested e-beam evaporation tools on those systems for comparison. On those setups NIST has found that only the SUSI achieves the required growth quality for NISTs devices to function. This also means that all of NISTs successful procedures for device encapsulation have been developed on a SUSI and constitute years of experimental effort that is applicable only to a SUSI tool; attempting to use a different tool (e.g. an e-beam evaporator) would therefore require undue research burden.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:NB683110-23-02326
  1. Market Research
  1. 2×
    Market ResearchJun 15, 2023

    Silicon Sublimation Source

    Notice d6e989d5486c47198d771d485a1bf47a on SAM.gov

  2. Special NoticeCurrentJul 6, 2023

    NOTICE OF INTENT-Silicon Sublimation Source

    Notice fed92ecc441f417c8494a5173720a3ea on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

NB683110-23-02326

Archive Date

Jul 28, 2023

Office Address

GAITHERSBURG, MD, 20899