GovChime
Notice ID: c967896ba1354bc3b80c95b4874c906bSpecial NoticeArchived

Notice of Intent to Sole Source Replacement Locking Electronics

Archived on February 20, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
11:00 AM MST
Posted
January 29, 2026
Notice type
Special Notice
NAICS
334515: Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
Agency
Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY

Notice details

Place of performance
Boulder, Colorado, 80305
Last updated
Nov 3, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
NB688000-26-00406
Notice ID
c967896ba1354bc3b80c95b4874c906b

Description

The National Institute of Standards and Technology (NIST) Acquisition Management Division intends to negotiate with Menlo Systems, Inc., located in Boulder, CO, on a sole source basis under the authority of FAR Subpart 13.106-1(b), soliciting from a single source, for Replacement Locking Electronics for an Ultrastable Cavity Laser System.

Specific Requirements are as follows:

SYNCRO control unit in a 19”, 3 height units enclosure, including:

•Customized configuration to upgrade the existing locking electronics delivered as part of the project AU00615

•Servo loop electronics for Pound-Drever-Hall laser frequency stabilization with high-bandwidth PIID controller

•ORC-TEC Temperature Controller for temperature stabilization of EOM and vacuum chamber and all additional components needed for full functionality

•Installation of SYNCRO unit at user’s lab in Boulder, CO

NAICS Code is 334515 –Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals, with a Size Standard of 750 employees. NIST anticipates negotiating and awarding a firm-fixed-price purchase order to Menlo Systems, Inc. for this requirement.

Interested parties that can demonstrate they could satisfy the requirements listed above for NIST must clearly and unambiguously identify their capability to do so in writing on or before the response date for this notice. This notice of intent is not a solicitation. Information submitted in response to this notice will be used solely to determine whether competitive procedures could be used for this acquisition. If competitive procedures are not used it is estimated that an award will be issued by February 27, 2026. Any questions regarding this notice must be submitted in writing via email to lisa.stevens@nist.gov. All responses to this notice of intent must be submitted to lisa.stevens@nist.gov no later than the date and time provided herein this posting.

JUSTIFICATION FOR OTHER THAN FULL AN OPEN COMPETITION:

NIST’s Time and Frequency Division owns an ORC1500 Optical Reference Cavity System and is in need of a replacement SYNCRO locking electronics for laser frequency stabilization. The SYNCRO system is made solely by Menlo Systems and is intended to operate with the ORC1500 Optical Reference Cavity System (Project Number AU00615) also manufactured by Menlo Systems. Menlo Systems is the sole provider of the SYNCRO system as proprietary information is required for its integration into the ORC1500 system. Using incompatible third-party locking electronics could potentially damage components in the ORC1500 system and would make the ORC1500 system ineligible for future service contracts from Menlo Systems and any warranties would be voided.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (1)

  • NB688000-26-00406 Requirements and Specifications.pdf

    218 KBAdded in Special Notice version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Special NoticeArchivedCurrent

    Notice of Intent to Sole Source Replacement Locking Electronics

    Notice c967896ba1354bc3b80c95b4874c906b on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
This is a Brand Name requirement for APCRBC140 replacement battery cartridges from APC by Schneider Electric. See the attached Specifications, Brand name justification, and RFQ document for full details of the requirement. ALL OFFERORS (i.e. the vendor that will receive the award payment) MUST PROVIDE PROOF OF PRICING FROM THE MANUFACTURER, AND CONFIRM AUTHORIZATION (from the original equipment manuafacturer)TO RESELL THE ITEMS LISTED IN THE STATEMENT OF WORK TO BE CONSIDERED FOR AWARD. Partial quotes will not be accepted. All correspondence must reference the notice ID in the subject line to ensure visibility.
69%
Combined Synopsis11/09/2026
67%
Market Research11/20/2026
Sources Sought Notice for Graphite Furnace Atomic Absorption Spectrometer Notice ID: NIST-MML-FY27-SS01 Response Date: 11/28/2026 Product Service Code (PSC): 6640 NAICS Code: 334516 Background The Inorganic Chemical Metrology Group (ICMG) uses at least two measurement methods, each based on orthogonal physical principles, to certify the trace elements in candidate standard reference materials (SRM). These SRMs are intended for method validation and quality assurance in trace-element measurements to assess the nutritional value and contaminant status of agricultural products. A sensitive trace-element detector, a graphite furnace atomic absorption spectrometer (GFAAS) is sought to complement the group's inductively coupled plasma mass spectrometric (ICP-MS) measurement capability and fulfill the two independent method requirements for SRM development. Consideration will be given to GFAAS capable of direct solid-sample analysis to maximize its orthogonality relative to the liquid-sampling-based ICP-MS technique. Minimum Capabilities that NIST Requires and for Which Information is Being Requested The National Institute for Standards and Technology (NIST) located in Gaithersburg, MD is seeking information on vendors that are capable of providing a graphite furnace atomic absorption spectrometer (1) capable of measuring liquid test samples with an instrument detection limit (DL) for Cu at 0.02 µg/L or better (324.8 nm line, 50 µL sample volume, DL=3 x standard deviation of 10 replications) and (2) designed for direct introduction of solid state test samples into the graphite furnace for analyte quantification without a need of sample digestion Instructions for Responding to This Notice Parties that respond to this Notice are requested to submit the requested information via email in Microsoft Word, Adobe PDF, and/or Microsoft Excel format to the designated point(s) of contact whose name and email address appears at the bottom of this notice. Please provide only the information requested by this Notice, and do not include proprietary, classified, confidential, or sensitive information in a response to this Notice. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Information Requested in Response to This Notice: To help NIST with its market research, NIST is requesting that industry sources carefully review this notice and any attachments to it and voluntarily provide the following information: Company Summary Notice Identification: Notice ID and Title of this posting. Corporate Details: Company name, physical address, website address, and Unique Entity Identifier (UEI). Point of Contact (POC): Name, phone number, and email address. Company Size Standard: Your company’s size status relative to the NAICS code provided in this Notice. (Refer to the SBA Table of Small Business Size Standards). System for Award Management (SAM) Registration: Indicate whether your company has an active registration for procurement purposes in SAM.gov. Review the information included with this Notice, indicate whether there is anything that may inadvertently exclude domestically manufactured (made in the U.S.A.) end products from being considered; and indicate if anything included with this Notice could potentially be revised to improve the ability for domestic (“Made in America”) end products to be considered; and if a domestic end product is not currently available to meet the draft requirements/minimum specifications, please provide an estimated timeframe for when it may be domestically produced in the USA in the future if that appears to be likely. Information Regarding Commercial Products and Related Commercial Services Provide specifications, company name of the original equipment manufacturer, and the country of manufacture for commercial products and/or commercial services that your company is legally authorized to sell and that may meet NIST’s minimum requirements. Standard Commercial Pricing: Provide your company’s standard commercial pricing information for the requirements described in this Notice (including any Attachments) and explain what is included in those standard commercial prices. Estimated Price Range: You may provide an estimated price or estimated price range for the draft requirements included in this notice, including a brief explanation of how it was derived. Standard Commercial Terms and Conditions: Provide a copy of the standard commercial terms and conditions for the commercial products and/or commercial services identified in your company’s response to this Notice, including the nature and the duration of applicable standard commercial warranty(ies). Regulatory and Supply Chain Compliance Indicate whether your company could comply with RFO FAR clause 52.219-14 (Deviation JAN 2026) if this acquisition were to be set aside for small businesses (assuming that there is no waiver to the Nonmanufacturer Rule for the applicable NAICS code). Provide a brief supporting explanation. Existing Governmentwide Contract Vehicles Indicate whether your company has its own GSA Multiple Award Schedule (MAS) contract or other federal contract vehicle(s) under which NIST could award an order and, if so, provide the details of the contract(s) (contract number, Contracting Officer name/contact, SOW, terms and conditions, and price lists). Important Notes This Notice does not obligate the Government to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the chosen acquisition strategy. Responses received after the closing date for this Notice may not be considered. There is no solicitation available at this time. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.
61%
Market Research11/28/2026
61%
Market Research12/05/2026
61%
Market Research12/03/2026

Additional Details

Solicitation Number

NB688000-26-00406

Archive Date

Feb 20, 2026

Office Address

US