Notice ID: d96febccb2571bd5296964c55f26eeb7Combined Synopsis/Solicitation
Sanak Island, Alaska Vessel Charter
Archived on October 5, 2016. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 3:00 AM UTC+02:00
- Posted
- September 15, 2016
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 483114: Coastal and Great Lakes Passenger Transportation
- Agency
- Department of CommerceNATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION
Notice details
- Office
- DEPT OF COMMERCE NOAA
- Place of performance
- Alaskan waters
- PSC
- B: SPECIAL STUDIES/ANALYSIS, NOT R&D
- Last updated
- Dec 5, 2025
Identifiers
- Solicitation number
- NFFS7100-16-03492-RFQ
- Notice ID
- d96febccb2571bd5296964c55f26eeb7
Description
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is NFFS7100-16-03492 as is issued as a Request for Quote (RFQ. Please submit an RFQ no later than August 11, 2016 at 10am Pacific Time. Responses can be e-mailed to Mona.M.Ash@noaa.gov or mailed to DOC NOAA AFSC, 7600 Sand Point Way NE, Building 4, Seattle, WA 98115. This solicitation document incorporates provisions and clauses that are in affect through Federal Acquisition Circular FAC 2005-89. This acquisition is 100% small business set-aside. The North American Industry Classification System (NACIS) code is 483114. Small business size standard is 500 employees. LINE ITEMS 0001 VESSEL CHARTER TO STUDY WALLEYE POLLOCK NEAR SANAK ISLAND, ALASKA 5 DA $________________/Day = $_________________ 0001A OPTIONAL CHARTER DAY 1 DA $________________ 0002 FUEL - Price shall include daily fuel usage excluding 52.212 for transit to starting port and from ending port associated with the charter. GAL/Day________ x 6 DA = $_____________ Total $_______________ DESCRIPTION OF REQUIREMENT The Contractor shall supply the necessary personnel, material, equipment, and facilities (except as otherwise specified) to perform the following the Statement of Work/Specifications. STATEMENT OF WORK/SPECIFICATIONS The contract will consist of a period of performance from 23 September 2016 or date of award to 1 February 2017. The actual charter operations period shall occur in September 2016 (pre-cruise meeting) and a 5-day vessel charter in November or December 2016 and optional charter day depending on weather and vessel availability (mooring deployment). The contractor shall be available the entire months of November and December charter period. Title: Evaluation of peak spawning time(s) for walleye pollock near Sanak Island, Alaska using moored echosounders. BACKGROUND: Acoustic-trawl (AT) surveys provide critical input to stock assessment models and other management needs throughout NOAA. Researchers at the Alaska Fisheries Science Center, for example, provide AT survey estimates of the pre-spawning pollock biomass for use in the Gulf of Alaska (GOA) pollock stock assessment. The pre-spawning pollock estimates are based on AT surveys conducted annually for over 20 years in primarily in two GOA areas (Shelikof, Shumagins). Other important pollock spawning areas are also regularly surveyed during the course of these two major survey efforts. One area located close to the Shumagins Islands is Sanak Island, which has been surveyed annually since 2003. Sanak is surveyed during the Shumagin survey for logistical reasons. Although the survey timing and timing of peak pollock spawning for the Shumagin area are well-aligned, this is not the case for Sanak. That is, the median proportion of spawning and spent adult females for Sanak (median 0.3; range 0.6 - 0.65), suggests that peak densities of spawning fish in Sanak likely occur well before the survey is conducted (median values should be less than ~0.10 to 0.15). This is problematic because if the survey timing is too early or too late to coincide with peak spawning densities, the pre-spawning pollock biomass will be underestimated. Estimation of the peak spawning time for pollock in Sanak will provide information to improve scheduling of the pre-spawning pollock AT survey in Sanak. Previous work in Shelikof Strait (2015) and Resurrection Bay (2016) demonstrated the value of using newly developed trawl-resistant bottom-mounted echosounder packages to construct time-series of pre-spawning pollock as they moved into and out of the Strait or Bay to spawn. This echosounder mooring time series can be used to estimate the time of peak spawning to optimize the time when an AT survey should be conducted. This same sort of echosounder-mooring approach can be used to estimate time of peak spawning for pollock in Sanak. Moorings will be deployed well-before pre-spawning pollock move into the Sanak area to spawn (i.e., November or December), and not recovered until well-after fish have spawned and left the Sanak Island spawning area (i.e., May). The distribution of pollock in Sanak during recent Feb surveys of the area will be used to choose the two most appropriate mooring sites to document the movement of fish into and out of this area. The deployment of two rather than one mooring will provide valuable information to assess the spatial coherence of spawning time within the area, as well as to provide some redundancy if a mooring fails. Although not a requirement, the town of Sand Point is close by, and commercial fishing vessels home-ported there can provide valuable support to deploy the moorings near Sanak. The moorings will be recovered using the NOAA ship, Oscar Dyson. OBJECTIVE: NOAA requires deployment of two trawl-resistant echosounder moorings near Sanak Island where they will record data nearly continuously from November or December through May to encompass the spawning season to estimate timing of pollock peak spawning. This information will be used to help optimize the timing of NOAA AT pre-spawning pollock surveys in this area. This, in turn will reduce the probability to underestimate pre-spawning pollock abundance. SCOPE OF WORK: The Resource Assessment and Conservation Engineering (RACE) Division of the Alaska Fisheries Science Center (AFSC) has a requirement for a vessel charter near Sanak Island in the Gulf of Alaska to deploy two trawl-resistant echosounder moorings, to collect acoustic data using shipboard acoustics while running along transects in the vicinity of the moorings, and to conduct midwater trawl hauls and/or lowered underwater camera deployments targeting suspected fish acoustic backscatter along the transects. The work will generally involve the deployment of two trawl-resistant echosounder moorings near Sanak Island, as weather permits in late November or December 2016. Immediately following the mooring deployments, an acoustic-survey and one or more midwater trawl hauls targeting suspected fish acoustic layers if present, will be conducted in the vicinity of the mooring sites. There will be two (2) research scientists from the Alaska Fisheries Science Center aboard the vessel, one of whom will act as Chief Scientist. An initial "pre-cruise meeting, will be conducted by telephone in September to coordinate mooring logistical operations among the scientists, and vessel operator. The specific date for fieldwork will be planned for November or December depending on when suitable weather is forecast to conduct the work. The vessel operator shall notify the two AFSC scientists participating in the fieldwork that the weather forecast looks promising to schedule the fieldwork. The day before cruise departure, the moorings and associated equipment will be loaded aboard the vessel. The scientists will assemble the moorings that afternoon/evening. Early the following day, the vessel will depart for the Sanak mooring sites (See Mooring Location & Mooring Assembly attachment). Once the vessel is in deep water (150-200 m bottom depth) after leaving Sand Point enroute to the mooring deployment sites, the ship shall stop, and the mooring echosounder only (~ 100 lbs) will be slowly lowered to a depth of about 150 m. This activity is needed to make certain that the instrument is properly calibrated when it is later deployed in the trawl-resistant housing at the mooring site. Each mooring echosounder will need to be lowered separately to be calibrated at this deep water location. At the mooring site, the mooring will be attached to a line sufficiently long to lower the 850 lb mooring with its 250 lb mooring-release-cage to a depth of 150-200 m (See Mooring Location & Mooring Assembly attachment). The mooring and cage will be gently deployed over the side of the vessel using a crane, A-frame, or other suitable procedure. While the mooring is being lowered to near the seafloor, the vessel will try to maintain its position on-station, but more importantly, it will try to maintain a reasonably vertical wire/rope angle (i.e., we do not want to tow the mooring to remain on station in the presence of a strong current). A transponder will be attached to the mooring release cage so that the distance between the mooring and sea floor is known in real time. Once the mooring is close to the sea floor (i.e., ~1-2 fathoms), the scientists will send a signal to the mooring-release cage, which will open the cage-floor trap door and allow the mooring to free fall the last 1-2 fm to the sea floor. Once the deployment line with the mooring release cage is back on deck, the scientists will conduct a mini acoustic survey (survey transect coordinates will be presented at the September pre-cruise meeting) in the area of each mooring site to determine whether suspected fish acoustic backscatter is present. If substantial backscattering from suspected fish aggregations are present, they will be sampled using a commercial midwater trawl supplied by the vessel or a lowered underwater camera system supplied by NOAA. The trawl will be fitted with a inch mesh codend liner supplied by NOAA. The trawl will be deployed using the vessel's 3rd wire or acoustic linked headrope netsonder to monitor the depth and gear performance during each haul. Haul duration will be determined by the chief scientist in consultation with the Captain. A sample size of 100-200 fish is sufficient, so tows will likely be relatively short duration. The catch will be deposited on the back deck where it will be processed by the scientists. None of the catch will be retained. Instead, all specimens will be returned to sea after processing. A small underwater camera may be used in lieu of the midwater trawl to sample acoustic layers. A stout fishing rod/electric reel will be used to lower the camera into acoustic scattering layer(s), which are detected from the vessel's echo sounder or the scientific sounder during the acoustic surveys at the mooring sites. The camera operations will attempt to collect information on what fish species compose the scattering layers that are recorded by the echosounder moorings. No more than a total of two hours shall be spent at each mooring site conducting camera activities. The chief scientist and vessel captain will decide whether to conduct a trawl haul or camera drop based on current conditions in the field. If a suitable quantitative echosounder with hull-mounted transducer is not available on the chartered vessel, a portable scientific echosounder system supplied by NOAA will be temporarily installed on the vessel. Either the vessel or NOAA echosounding system will be used to monitor the mooring-cage depth during deployments as well as to make quantitative measurements of the acoustic backscatter along survey transects near Sanak Island. Transects will be run after one or both moorings are deployed, and before the vessel transits back to Sand Point to debark the scientists and their equipment. The portable NOAA scientific echosounder transducer will be deployed in one of two ways: 1) mounted on a stout pole, which is securely attached to the side of the boat to position the transducer about 4-6 ft below the water surface; or 2) towed beside the ship in a hydrodynamic tow-body. The ship would run along transects at 5-6 kts during times when the transducer was deployed in either of these configurations. The specific transducer configuration that will be used will be determined based on discussions with the vessel captain and scientists during the Sept pre-cruise meeting. Once the vessel returns to Sand Point, or other mutually acceptable debarkation location (e.g., Dutch Harbor, Kodiak) following completion of the mooring deployment work, the scientists will have several hours the following day to remove their equipment from the ship (e.g., mooring release cage, portable echosounder, line used to lower mooring to depth, echosounder calibration cage). The debarkation location will be determined during the September pre-cruise meeting. PERIOD OF PERFORMANCE: The contract period of performance is from23 Sept 2016 or date of award to 1 Feb 2017. The actual charter operations period shall occur in September 2016 (pre-cruise meeting), and November 2016 (mooring deployment). All trips will begin and end in Sand Point, Alaska. REQUIREMENTS: The charter vessel shall be equipped with a complete echosounder system. If the vessel is not equipped with an appropriate scientific sounder (i.e., Simrad EK or ES echosounder), it must have an appropriate method to install the NOAA supplied pole-mounted transducer, or vessel equipment (boom/winch) to deploy the NOAA tow-body containing the transducer. The particular method to collect scientific acoustic data will be determined at the September pre-cruise meeting. The vessel shall have the necessary gear to deploy/lower the mooring to a depth of 200 m. The vessel shall provide all necessary winches and adequate deck space to deploy the moorings listed above. The vessel shall provide either a winch (hydraulic or electric), or crane or A-frame to recover the moorings from the sea surface, if a malfunction occurs in the mooring or mooring release frame during deployment. The vessel shall have adequate deck space to store the two moorings (see Mooring Location & Mooring Assembly attachment for details of the moorings). The vessel operator and/or deck crew shall be able to demonstrate experience with operation of the vessel and hauling equipment, including minor modifications and repairs to equipment as needed. The Contractor shall provide the vessel, captain, and crew for two scientists for the length of the charter period. Workday length shall be determined by the Chief Scientist in consultation with the Captain. The Chief Scientist has the final authority except in matters relating to safety of the vessel and vessel personnel. The crew, when not required by the Captain for vessel operations, shall assist the scientific personnel as needed. The Captain may be asked to assist scientific personnel with navigation. Scientists and crew may engage in recreational fishing from charter vessels with permission of the captain and if done in compliance with recreational fishing laws and regulations in effect at the fishing locality. The Contractor shall provide for all operating expenses, except fuel. The Chief Scientist and the Captain will work together to resolve all problems which occur regarding the study. In the event the Chief Scientist and Captain are unable to resolve any problem which has the potential for invalidating the study or threatens the safety of the scientific party, the Chief Scientist will direct the vessel to return to port and will remain off charter until the problem has been resolved and the vessel has returned to the study area. The mooring operations shall need to be conducted on dates that consider weather and sea state conditions. The charter vessel shall be available to start and conduct the operations as weather allows for 5 days sometime between November and December 2016 as decided by the Chief Scientist in consultation with the vessel Captain. Vessel/Operating Requirements 1. Minimum vessel size for this charter is 58 ft. (18 m) length overall (LOA). 2. Mooring Deployment. The vessel shall provide a means to deploy the moorings by lowering the mooring to a depth of about 200 m. 3. Adequate deck space to deploy two moorings. 4. Full time 110 VAC or 12 VDC electricity. Electronic Equipment Requirements 1) Echosounder with hull-mounted transducer 2) GPS Plotter with navigation program 3) VHF radio 4) Cell phone or satellite phone 5) Radar Crew/Captain Requirements 1. The Captain shall have a minimum of three (3) years commercial experience of a comparable-sized vessel. 2. The crew shall be able to handle all operations related to the mooring deployment listed above. Safety Requirements 1. The vessel Captain shall be responsible for all matters relating to safety of personnel, the vessel, and equipment operation. The Captain shall adhere at all times to Navigational Rules and Rules of the Road whether it be while operating fishing gear, running, drifting, or when at anchor. He/she shall review safety procedures and equipment with the scientific party at the beginning of each cruise. 2. The Contractor shall adhere to the safety requirements which include 46 CFR Part 28 (Attachment B). 3. The Contractor shall provide U.S. Coast Guard-approved Arctic-type survival suits for all vessel personnel. All scientific personnel will provide their own suits. Adequate dry, top-side storage for all survival suits shall be provided. 4. The Contractor shall provide U.S. Coast Guard-approved life jackets for all personnel on board. 5. A Category I 406 MHZ EPIRB (Emergency Position Indicating Radio Beacon) shall be affixed to the exterior of the vessel in a manner approved by the Coast Guard. 6. At least one crew member shall be formally trained in survival and firefighting at a level equivalent to that offered by the North Pacific Fishing Vessel Owner's Association. 7. The vessel shall pass a U.S. Coast Guard safety examination no earlier than two weeks before the vessels' scheduled departure and the Coast Guard certification shall be obtained by the vessel, no less than one week prior to the scheduled departure. 8. All vessels chartered by NOAA shall be maintained in a seaworthy condition. All vessels shall possess one or more of the following documents, reflecting the vessel's current configuration, as evidence of the vessel's material condition, structural, and watertight integrity: current vessel classification, SOLAS Safety Construction (SLC) Certificate, Loadline Certificate, or equivalent applicable Classification Society documents; or evidence of drydocking examination, or underwater survey in lieu of drydocking, and an internal structural examination, twice within all previous five-year periods with no more than three years between any two examinations and more frequently if required per USCG regulations relevant to the size, age, and use of the vessel from a recognized marine surveying company certifying the vessel's structural and watertight integrity. 9. Means of escape. Aboard all vessels chartered by NOAA there shall be two identified escape routes from all general areas. At least one of these two means shall be independent of water tight hatches and doors, except for quick acting watertight hatches and doors giving final access to weather decks. 10. Fire protection. All vessels chartered by NOAA shall have in place fully functional fire protection systems and equipment, such as portable and semi-portable fire extinguishers, fire pumps, fire mains, fixed gas extinguishing systems, and fire detection and alarm systems in accordance with USCG or SOLAS requirements. 11. All vessels chartered by NOAA shall carry survival craft of aggregate capacity to accommodate at least 100% of the number of persons permitted to be aboard. Survival craft must meet USCG or SOLAS regulations based on vessel size, type, construction, and area of operation. For operations outside the boundary line, survival craft shall be outfitted with SOLAS A pack for ocean service. All survival craft shall be stowed so as to float free and inflatable survival craft must automatically inflate in the event the vessel sinks. Each survival craft and stowage arrangement shall meet USCG or SOLAS maintenance, servicing, and certification requirements as evidenced by a current and valid USCG inspection or SOLAS certification. The expiration date of survival craft inspection and certification shall not be exceeded during the charter period. Scientific Personnel 1. The Government field party consists of two scientists. 2. A Government employee will be designated as Chief Scientist. That person will be responsible for implementation of the Cruise Plan, disposition of catches, and the conduct and performance of Government personnel aboard the vessel. CLAUSES AND PROVISIONS 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/vffara.htm (End of Provision) 52.212-4 CONTRACTOR TERMS AND CONDITIONS - COMMERCIAL ITEMS (MAY 2015) 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS CONTRACTORS (DEC 2013) 52.244-6 SUBCONTRACTS FOR COMMERCIAL ITEMS (DEC 2010) 52.245-1 GOVERNMENT PROPERTY (APR 2012) (ALT I) (APR 2012) 1352.209-72 RESTRICTIONS AGAINST DISCLOSURE (APR 2010) 1352.201-70 CONTRACTING OFFICER'S AUTHORITY (APR 2010) 1352.209-73 COMPLIANCE WITH THE LAWS (APR 2010) 1352.209-74 ORGANIZATIONAL CONFLICT OF INTEREST (APR 2010) 52.203-98, PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS - REPRESENATION (DEVIATION 2015-02) PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS-REPRESENTATION (FEB 2015) (a) In accordance with section 743 of Division E, Title VII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015 (Pub. L. 113-235), Government agencies are not permitted to use funds appropriated (or otherwise made available) under that or any other Act for contracts with an entity that requires employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The prohibition in paragraph (a) of this provision does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (c) Representation. By submission of its offer, the Offeror represents that it does not require employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (End of provision) 52.212-1 INSTRUCTIONS TO OFFERORS - COMMERCIAL ITEMS (a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition are 483114 and 500 employees. However, the small business size standard for a concern which submits an offer in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees. (b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on letterhead stationery. As a minimum, offers must show -- (1) The solicitation number; (2) The name, address, and telephone number of the offeror; (3) The offer(s) shall submit Attachment A - Vessel Information; Attachment C - FAR 52.212-3 - Offeror Representations and Certifications -- Commercial Items; Attachment D - FAR 52.204-99 - System for Award Management Registration (DEVIATION); and, Attachment E - FAR 52.209-11 - Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction Under any Federal Law (4) Terms of any express warranty; (5) Price and any discount terms, and fuel burn rate calculation in clause titled (See Special Requirements, "Invoicing for Fuel" Calculation); (6) "Remit to" address, if different than mailing address; and, (7) Acknowledgment of Solicitation Amendments (if any); (c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation. (d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during preaward testing. (e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions or commercial items for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately. (f) Late submissions, modifications, revisions, and withdrawals of offers. (1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due. (2) (i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is "late" and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and- (A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or (B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government's control prior to the time set for receipt of offers; or (C) If this solicitation is a request for proposals, it was the only proposal received. (ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted. (3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel. (4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. (5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer. (g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror's initial offer should contain the offeror's best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received. (h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer. (i) Availability of requirements documents cited in the solicitation. (1) (i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to-- GSA Federal Supply Service Specifications Section Suite 8100 470 L'Enfant Plaza, SW Washington, DC 20407 Telephone (202) 619-8925) Facsimile (202 619-8978). (ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee. (2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites-- (i) ASSIST (https://assist.dla.mil/online/start/ ). (ii) Quick Search (http://quicksearch.dla.mil/). (iii) ASSISTdocs.com (http://assistdocs.com). (3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by- (i) Using the ASSIST Shopping Wizard ( https://assist.dla.mil/wizard/index.cfm ); (ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or (iii) Ordering from DoDSSP, Building 4 Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697/2197, Facsimile (215) 697-1462. (4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance. (j) Data Universal Numbering System (DUNS) Number. (Applies to offers exceeding $3,500, and offers of $3,500 or less if the solicitation requires the Contractor to be registered in the System for Award Management (SAM) database. The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "DUNS" or "DUNS+4" followed by the DUNS or DUNS+4 number that identifies the offeror's name and address. The DUNS+4 is th...
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
No documents available.
Lifecycle
Solicitation:
NFFS7100-16-03492-RFQ- Combined Synopsis
- Combined SynopsisCurrentSep 15, 2016
Sanak Island, Alaska Vessel Charter
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Additional Details
Solicitation Number
NFFS7100-16-03492-RFQ
Archive Date
Oct 5, 2016