GovChime
Notice ID: d26d11a82a4949afb548d5e5437360b5Sources SoughtArchived

Living Measurement Systems Foundry (LMSF) Expansion, Upgrade, and Maintenance Services

Archived on August 21, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
10:00 AM EDT
Posted
August 13, 2026
Notice type
Sources Sought
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY

Notice details

Office
DEPT OF COMMERCE NIST
Place of performance
Gaithersburg, Maryland, 20899
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
NIST-MML-26-SS08
Notice ID
d26d11a82a4949afb548d5e5437360b5

Description

Title: Living Measurement Systems Foundry (LMSF) Expansion, Upgrade, and Maintenance Services

NAICS Code: 334516 Analytical Laboratory Instrument Manufacturing

Contracting Office Address

National Institute of Standards and Technology (NIST),

Acquisition Management Division,

100 Bureau Drive, Mail Stop 1640,

Gaithersburg, MD, 20899-1640

This is a Sources Sought Notice ONLY.  Requests for copies of a solicitation will not receive a response. 

This notice is for planning purposes only and is not a Request for Proposal or Request for Quotation or an obligation on the part of the National Institute of Standards and Technology (NIST) for conducting a follow-on acquisition. 

This Notice assists the Government in determining whether there are any domestically manufactured end product sources for the project title.

NIST does not intend to award a contract on the basis of this notice or otherwise pay for the information requested.  No entitlement or payment of direct or indirect costs or charges by NIST will arise as a result of submission of responses to this notice and NIST use of such information.  NIST recognizes that proprietary components, interfaces and equipment, and clearly mark restricted or proprietary components, interfaces and equipment, and clearly mark restricted or proprietary data and present it as an addendum to the non-restricted/non-proprietary information.  In the absence of such identification, NIST will assume to have unlimited rights to all technical data in the information paper.

 

NO SOLICITATION DOCUMENTS EXIST AT THIS TIME.

Requirement:

NIST is seeking information from manufacturers, suppliers, and integrators capable of furnishing a complete laboratory automation solution consisting of one new Living Measurement Systems Foundry (LMSF) automation system and the equipment necessary to modernize the Government's existing LMSF automation system.

The anticipated requirement includes, but is not limited to, the following:

1. New Living Measurement Systems Foundry Automation System

The Contractor shall furnish one complete, integrated LMSF automation system for automated microbial culture, sample preparation, and analytical workflows.

The system is anticipated to include:

  • Hamilton Company MicroLab STAR liquid handling platform and associated modules;
  • Multi-mode plate readers;
  • Automated microplate sealing and de-sealing equipment;
  • Automated storage carousel;
  • Robotic arm capable of automated movement of plates, tip racks, and other materials between integrated instruments;
  • Solid waste collection capability;
  • Biosafety Level 2 (BSL-2) system enclosure and associated biological safety air handling;
  • Integration and automation control computers;
  • Automation, scheduling, instrument-control, and integration software; and
  • All other hardware, software, firmware, licenses, accessories, and components necessary to provide a complete and fully operational system.

The Contractor shall be responsible for system design, configuration, integration, programming, Factory Acceptance Testing (FAT), delivery, installation, Site Acceptance Testing (SAT), commissioning, documentation, operator training, and warranty support necessary to furnish the Government a complete and operational system.

2. Modernization of Existing Government-Owned LMSF

The Contractor shall furnish a new model Hamilton Company MicroLab STAR liquid handling platform and all associated hardware, software, firmware, licenses, and integration components necessary to replace the liquid handling platform currently integrated into the Government-owned LMSF.

The Contractor shall remove or otherwise disposition the existing liquid handling platform as directed by the Government and install, configure, and integrate the replacement platform with the remaining Government-owned LMSF equipment.

The modernization shall include integration of two Government-furnished Inheco single-plate incubator shakers and migration of applicable automation software, software configuration files, automation programs, instrument settings, drivers, user configuration files, automation scripts, communication settings, and associated operational data necessary to maintain operation of the existing LMSF.

The modernized system shall preserve the existing system's automation functionality and shall operate interoperably with the new LMSF automation system.

Interested parties shall describe the capabilities of their organization as it relates to the product described above. 

NIST anticipates issuing a Request for Quotation in the fourth quarter of FY26 and awarding a contract no later than the fourth quarter of FY26.

NIST is seeking responses from all responsible sources, including large and small businesses. The small business size standard associated with the NAICS code for this effort, 334516 Analytical Laboratory Instrument Manufacturing; size standard 1,000 employees.  Please include your company’s size classification and socio-economic status in any response to this notice.

After results of this market research are obtained and analyzed, NIST may conduct a competitive procurement and subsequently award a contract.  Companies that can provide such products are requested to email a written response describing their abilities to donald.graham@nist.gov no later than the response date for this sources sought notice.

The following information is requested to be provided as part of the response to this sources sought notice:

  1. Name, Address, UEID, CAGE code, and point of contact information of your company.
  2. Any information on the company’s small business certifications, if applicable.
  3. Description of your company’s capabilities as they relate to the product described in this notice.
  4. A description of your company’s previous experience providing the product described in this notice.
  5. Indication of whether the product described in this notice are currently offered via your company’s GSA Federal Supply Schedule (FSS) contracts, Government-wide Acquisition Contracts (GWACs), or other existing Government-wide contract vehicles; and, if so, the contract number(s) for those vehicles.
  6. Any other relevant information that is not listed above which the Government should consider in finalizing its market research.
  7. Place of Manufacture: Is more than 55% of item manufactured domestically, and if not where is it manufactured?

Responses are limited to a total of twelve (12) pages. The responses must be in MS Word format.  Pages shall be 8½-inch x 11-inch, using Times New Roman 11 Point Font.  Each page shall have adequate margins on each side (at least one inch) of the page. Header/footer information (which does not include any information to be analyzed) may be included in the 1" margin space.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

  1. 3
    Version 3Sources SoughtArchivedCurrent

    Living Measurement Systems Foundry (LMSF) Expansion, Upgrade, and Maintenance Services

    Notice d26d11a82a4949afb548d5e5437360b5 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
70%
Market Research12/05/2026
Sources Sought Notice for Graphite Furnace Atomic Absorption Spectrometer Notice ID: NIST-MML-FY27-SS01 Response Date: 11/28/2026 Product Service Code (PSC): 6640 NAICS Code: 334516 Background The Inorganic Chemical Metrology Group (ICMG) uses at least two measurement methods, each based on orthogonal physical principles, to certify the trace elements in candidate standard reference materials (SRM). These SRMs are intended for method validation and quality assurance in trace-element measurements to assess the nutritional value and contaminant status of agricultural products. A sensitive trace-element detector, a graphite furnace atomic absorption spectrometer (GFAAS) is sought to complement the group's inductively coupled plasma mass spectrometric (ICP-MS) measurement capability and fulfill the two independent method requirements for SRM development. Consideration will be given to GFAAS capable of direct solid-sample analysis to maximize its orthogonality relative to the liquid-sampling-based ICP-MS technique. Minimum Capabilities that NIST Requires and for Which Information is Being Requested The National Institute for Standards and Technology (NIST) located in Gaithersburg, MD is seeking information on vendors that are capable of providing a graphite furnace atomic absorption spectrometer (1) capable of measuring liquid test samples with an instrument detection limit (DL) for Cu at 0.02 µg/L or better (324.8 nm line, 50 µL sample volume, DL=3 x standard deviation of 10 replications) and (2) designed for direct introduction of solid state test samples into the graphite furnace for analyte quantification without a need of sample digestion Instructions for Responding to This Notice Parties that respond to this Notice are requested to submit the requested information via email in Microsoft Word, Adobe PDF, and/or Microsoft Excel format to the designated point(s) of contact whose name and email address appears at the bottom of this notice. Please provide only the information requested by this Notice, and do not include proprietary, classified, confidential, or sensitive information in a response to this Notice. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Information Requested in Response to This Notice: To help NIST with its market research, NIST is requesting that industry sources carefully review this notice and any attachments to it and voluntarily provide the following information: Company Summary Notice Identification: Notice ID and Title of this posting. Corporate Details: Company name, physical address, website address, and Unique Entity Identifier (UEI). Point of Contact (POC): Name, phone number, and email address. Company Size Standard: Your company’s size status relative to the NAICS code provided in this Notice. (Refer to the SBA Table of Small Business Size Standards). System for Award Management (SAM) Registration: Indicate whether your company has an active registration for procurement purposes in SAM.gov. Review the information included with this Notice, indicate whether there is anything that may inadvertently exclude domestically manufactured (made in the U.S.A.) end products from being considered; and indicate if anything included with this Notice could potentially be revised to improve the ability for domestic (“Made in America”) end products to be considered; and if a domestic end product is not currently available to meet the draft requirements/minimum specifications, please provide an estimated timeframe for when it may be domestically produced in the USA in the future if that appears to be likely. Information Regarding Commercial Products and Related Commercial Services Provide specifications, company name of the original equipment manufacturer, and the country of manufacture for commercial products and/or commercial services that your company is legally authorized to sell and that may meet NIST’s minimum requirements. Standard Commercial Pricing: Provide your company’s standard commercial pricing information for the requirements described in this Notice (including any Attachments) and explain what is included in those standard commercial prices. Estimated Price Range: You may provide an estimated price or estimated price range for the draft requirements included in this notice, including a brief explanation of how it was derived. Standard Commercial Terms and Conditions: Provide a copy of the standard commercial terms and conditions for the commercial products and/or commercial services identified in your company’s response to this Notice, including the nature and the duration of applicable standard commercial warranty(ies). Regulatory and Supply Chain Compliance Indicate whether your company could comply with RFO FAR clause 52.219-14 (Deviation JAN 2026) if this acquisition were to be set aside for small businesses (assuming that there is no waiver to the Nonmanufacturer Rule for the applicable NAICS code). Provide a brief supporting explanation. Existing Governmentwide Contract Vehicles Indicate whether your company has its own GSA Multiple Award Schedule (MAS) contract or other federal contract vehicle(s) under which NIST could award an order and, if so, provide the details of the contract(s) (contract number, Contracting Officer name/contact, SOW, terms and conditions, and price lists). Important Notes This Notice does not obligate the Government to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the chosen acquisition strategy. Responses received after the closing date for this Notice may not be considered. There is no solicitation available at this time. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.
65%
Market Research11/28/2026
65%
Market Research12/03/2026
SECTION A U.S. Government ~ Tax Exempt Solicitation Information All quotes/responses shall be submitted via email to JaNae Lester at janae.a.lester.civ@us.navy.mil no later than Monday, November 9, 2026 @ 2:00 PM EST. Solicitation N0042127Q1022 is issued as an intent to sole source. The Government intends to purchase on a firm fixed-price basis, and to solicit and negotiate the proposed purchase order on a sole source basis with Surface Optics Corporation for SOC-410-DHR with Measurement Head, Command Module, Calibration Coupon, under the authority implemented by Federal Acquisition Regulation (FAR) by FAR Part 13.106-1(b). This procurement is a total set-aside for small business under the authority of FAR Part 52.219-6. This is a firm fixed-price procurement; therefore, the offeror’s intial offer should represent the vendor’s best quote in terms of price and technical acceptability. ***Basis for Award*** The Government intends to award this on a sole source basis. All interested parties MUST submit their capabilities and a quote no later than Monday, November 9, 2026 @ 2:00 PM EST. The Government will make a decision to consider other offers. ***Instructions to Offerors*** Please include the following information with your response: FOB: Shipping Cost: Cage Code: Small Business – Yes ___ No ___ Estimated Delivery Date: If available on a Pricelist please provide a copy. Government Point of Contact: JaNae Lester Naval Air Warfare Center AD (PAX) 21983 Bundy Road, BLDG 441 Patuxent River, MD 20670-1127 Email: janae.a.lester.civ@us.navy.mil
63%
Combined Synopsis11/09/2026
THIS IS A NOTICE OF INTENT TO SOLE SOURCE, NOT A REQUEST FOR A QUOTE (RFQ). A RFQ WILL NOT BE ISSUED AND QUOTES WILL NOT BE REQUESTED. Naval Surface Warfare Center Indian Head Division (NSWC, IHD), intends to award a firm fixed price contract on a noncompetitive basis to Fisher Scientific, Part of Thermo Fisher Scientific to provide the following service: FTIR Microscope, Raman Microscope and Ion Chromatograph equipment. This action is to be undertaken in accordance with FAR 12.102 (a) Soliciting from a single source, on the basis that the vendor is the only known source capable of meeting the government’s requirements The North American Industry Classification System (NAICS) for this requirement is 334516. The FSC code is 6640. The resulting contract will be a firm fixed price contract. Negotiation being conducted using other than full and open competition procedures pursuant to authority of 41 USC 1901. This Notice of Intent is NOT a request for quotes. Interested parties may identify their interests and capability to respond to this requirement by November 13, 2026 at 10AM (EST). Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government. Information received will be considered solely for the purpose of determining whether or not to conduct a competitive procurement. The determination not to compete this proposed contract action is solely within the discretion of the Government. The Government will not be responsible for any costs incurred by responding to this notice. Responses to this electronic notice must be made by 13 November 10:00am EST on 2026. Interested vendors must be registered in the System for Award Management (SAM) at https://www.sam.gove/portal/public/SAM. Oral communications are not acceptable in response to this notice. Interested parties shall e-mail all statements and capabilities to Marjorie Gray, via email: marjorie.m.gray2.civ@us.navy.mil and must provide clear and concise documentation indicating a vendor's bona fide capability.
61%
Special Notice11/13/2026

Additional Details

Solicitation Number

NIST-MML-26-SS08

Archive Date

Aug 21, 2026

Office Address

GAITHERSBURG, MD, 20899