Notice ID: c76677c563d64f639e2d07f7dd087ef4Sources SoughtArchived
Spectro2Guide Handheld Color and Gloss Spectrophotometer
Archived on August 16, 2025. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 11:00 AM EDT
- Posted
- July 25, 2025
- Notice type
- Sources Sought
- Agency
- Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
Notice details
- Office
- DEPT OF COMMERCE NIST
- Last updated
- Nov 11, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- NIST-NOI-25-7301803
- Notice ID
- c76677c563d64f639e2d07f7dd087ef4
Description
NOTICE OF INTENT TO SOLE SOURCE Spectro2Guide Handheld Color and Gloss Spectrophotometer Announcement Type: Special Notice Announcement Number: NIST-NOI-25-7301803 Subject: Spectro2Guide Handheld Color and Gloss Spectrophotometer Introduction This is a notice of intent, not a request for a quotation. A solicitation document will not be issued and quotations will not be requested. Purpose The National Institute of Standards and Technology (NIST) intends to negotiate a firm-fixed priced purchase order on a sole source basis with BYK USA, Inc. (UEI: H1LXJLJ8H849) located at 9104 Guilford Road, Columbia, MD 21046-2680. The purchase order will be for acquisition of a Spectro2Guide Handheld Color and Gloss Spectrophotometer. Delivery will be required within six weeks after contractor receipt of order. Authority This acquisition is being conducted under the authority of FAR Subpart 13.106(b)(1) allowing the Contracting Officer (CO) to solicit from one source. The North American Industry Classification System (NAICS) code for this acquisition is 334516 Analytical Laboratory Instrument Manufacturing with a size standard of 1,000 employees. Description The Contractor shall provide one (1) BYK Spectro2Guide Color Control Handheld d/8 Spectrophotometer in accordance with the specifications identified below. Technical Specifications d/8o measuring geometry spin (specular included) Capability of measuring gloss and color hue in one unit, independent of temperature Capability of measuring a sample size of 19 mm diameter or smaller Capability of storing a minimum of 1500 standards and 999 samples Utilization of LEDs as the light source of the instrument Temperature independent color and gloss data Minimum reproducibility tolerances of 0.10 delta E on 12 BCRA tiles. Minimum repeatability tolerances of 0.01 delta E, 10 consecutive measurements on white calibration tile. Portable Docking Station and Software (with at least one license) for computer interfacing Warranty Specifications Minimum 2-year warranty on instrument Minimum 10-year warranty on the light source in the instrument. Sole Source Determination The sole source determination is based on the following: The NIST IMG uses a BYK Spectro2Guide Color Control Handheld d/8 Spectrophotometer to obtain color and gloss measurements for ongoing research regarding semiconductor metrology, circular economy polymer degradation, and PV reliability. The existing spectrophotometer is reaching the end of its useful life and must be replaced. For the purposes of compatibility with existing research methods and reliable comparison of results with existing data, it is necessary to obtain an identical replacement. NIST's project protocols have been designed around the features of the proprietary BYK Spectro2Guide Color Control Handheld d/8 Spectrophotometer. Further, the BYK Spectro2Guide Color Control Handheld d/8 Spectrophotometer is the only spectrophotometer than can measure both color hue and gloss in a single unit, independent of temperate, and measure a sample size of 19mm diameter or less. NIST requires each of these features for its on-going research efforts. The BYK Spectro2Guide Color Control Handheld d/8 Spectrophotometer is therefore the only product capable of meeting the Government's requirements. Information for Interested Parties Interested parties that believe they could satisfy the requirements listed above for NIST may clearly and unambiguously identify their capability to do so in writing by or before the response date for this notice. This notice of intent is not a solicitation. Any questions regarding this notice must be submitted in writing via email to Ms. Lauren Roller, Contract Specialist, at Lauren.Roller@nist.gov. All responses to this notice of intent must be submitted via email to Lauren.Roller@nist.gov so that they are received no later than August 1, 2025 at 11:00 AM Eastern Time. Each response should include the following Business Information: Contractor Name, Address, Point of Contact Name, Phone Number, and Email address Contractor (SAM) Universal Entity Identification (UEI) Contractor Business Classification (i.e., small business, 8(a), woman owned, HUBZone, veteran owned, etc.) as validated in System for Award Management (SAM). All offerors must have an active registration in www.SAM.gov. Capability Statement
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Showing 1 of 1 items
Document | Source | Agency | Posted Date | File Size | Actions | |
|---|---|---|---|---|---|---|
| Special Notice | NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY | Jul 25, 2025 | - |
Lifecycle
- 3Version 3Sources SoughtArchivedCurrent
Spectro2Guide Handheld Color and Gloss Spectrophotometer
Other notices for this solicitation
- Special NoticeRelated noticeJul 22, 2025
Metrology Software for Mitutoyo Kogame Coordinate Measuring Machine
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
SECTION A U.S. Government ~ Tax Exempt Solicitation Information All quotes/responses shall be submitted via email to JaNae Lester at janae.a.lester.civ@us.navy.mil no later than Monday, November 9, 2026 @ 2:00 PM EST. Solicitation N0042127Q1022 is issued as an intent to sole source. The Government intends to purchase on a firm fixed-price basis, and to solicit and negotiate the proposed purchase order on a sole source basis with Surface Optics Corporation for SOC-410-DHR with Measurement Head, Command Module, Calibration Coupon, under the authority implemented by Federal Acquisition Regulation (FAR) by FAR Part 13.106-1(b). This procurement is a total set-aside for small business under the authority of FAR Part 52.219-6. This is a firm fixed-price procurement; therefore, the offeror’s intial offer should represent the vendor’s best quote in terms of price and technical acceptability. ***Basis for Award*** The Government intends to award this on a sole source basis. All interested parties MUST submit their capabilities and a quote no later than Monday, November 9, 2026 @ 2:00 PM EST. The Government will make a decision to consider other offers. ***Instructions to Offerors*** Please include the following information with your response: FOB: Shipping Cost: Cage Code: Small Business – Yes ___ No ___ Estimated Delivery Date: If available on a Pricelist please provide a copy. Government Point of Contact: JaNae Lester Naval Air Warfare Center AD (PAX) 21983 Bundy Road, BLDG 441 Patuxent River, MD 20670-1127 Email: janae.a.lester.civ@us.navy.mil | 62% | Combined Synopsis | 11/09/2026 |
Please see attached soliciitation. | 61% | Combined Synopsis | 11/24/2026 |
This is a total small business set-aside procurement in accordance with FAR 13- 13.003(b) (1) on a Firm-Firm Fixed-Price (FFP) basis. Award shall be made to the quoter whose quotation offers the lowest-priced, technically acceptable solution (LPTA). The associated North American Industrial Classification System (NAICS) code for this procurement is 334516, with a small business size standard of LARGE. The associated Federal Supply Code (FSC) / Product Service Code (PSC) procurement is 6650. The Naval Research Laboratory (NRL), located in Washington, DC, is seeking to purchase Quanta Inspection (Microscope). All interested companies shall provide quotations for the following: Quanta Inspection (Microscope) ______ See specification attachment Delivery Address: ________ U.S. Naval Research Laboratory 4555 Overlook Avenue, S.W. Bldg. 49 – Shipping/Receiving Code 3400 Washington, DC 20375 ________ U.S. Naval Research Laboratory 7 Grace Hopper Avenue, Bldg. 702 Monterey, CA 93943-5502 ________ U.S. Naval Research Laboratory 7 Grace Hopper Avenue, Stop 2 Bldg. 704 Monterey, CA 93943-5502 __X___ US Naval Research Laboratory Stennis Space Center Bldg. 2406, Code 7035.2 Stennis Space Ctr., MS 39529-5004 Supplies: Brand Name or Equal. Items must be brand name or equal in accordance with FAR 52.211-6. Software/Hardware/Services: This procurement is for new equipment ONLY, unless otherwise specifically stated. No remanufactured or "gray market" items are acceptable. All equipment must be covered by the manufacturer's warranty. • Vendor shall be an Original Equipment Manufacturer (OEM), an OEM authorized dealer, an authorized distributor, or an authorized reseller for the proposed equipment/system such that OEM warranty and service are provided and maintained by the OEM. All software licensing, warranty, and service associated with the equipment/system shall be in accordance with the OEM terms and conditions • Offerors are required to submit documentation from the manufacturer stating that they are an authorized distributor for the specific items being procured. Note: Maintenance Renewals - The performance period for maintenance renewals, (software licenses, services, etc.), must begin on or after the date of contract award. The performance period cannot be back dated. If reinstatement fees are required, they must be listed on separate line items. Lowest Price Technically Acceptable – Factor 1 – Price. Quotes will be evaluated to determine if the price is fair, and reasonable in accordance with FAR 12.209 (Commercial Item Determination of Price Reasonableness) and in conjunction with FAR 13.106-3 (Simplified Acquisition Procedures Award and Documentation). Quotations shall include a price for each Contract Line Item Number (CLIN). Factor 2 – Technical. The Government will evaluate the quoter’s capabilities to provide supplies/services in accordance with (IAW) the Solicitation. Offers will be ranked lowest to highest according to price. A price analysis will be conducted to determine whether the lowest price will result from a single award or multiple awards. Based on the price analysis, the lowest price offer or multiple offers, will be forwarded to the requiring activity for technical evaluation. Offer(s), in accordance with the specifications, will be deemed either technically acceptable or technically unacceptable. If the lowest price offer or offers is found technically acceptable and the pricing determined fair and reasonable by the Contracting Officer, evaluation will be deemed complete and award will be made based on the lowest price offer(s) Table A-1. Technical Acceptable/Unacceptable Ratings: Rating Description Acceptable Quote meets all the minimum requirements/specifications as stated or provided in the RFQ specifications. Unacceptable Quote does not clearly meet the minimum requirements/specifications as stated or provided in the RFQ specifications. Options. When applicable, the Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). SAM Registration. Award may be made without discussions or negotiations, therefore prospective contractors should have an active registration in the System for Award Management (SAM) database (www.sam.gov) in accordance with Federal Acquisition Regulation (FAR) Part 4.1102 and Part 52.204-7 when submitting a quote. The Technical and Price Quotation shall be submitted via email to: GOVERNMENT POINT OF CONTACT Contract Specialist Name: Curtis Ogletree Tel: (202) 923-1225 Email: Curtis.j.ogletree.civ@us.navy.mil QUESTIONS CONCERNING THE RFQ: All questions concerning this RFQ are due via email to the Purchasing Agent’s email address above No Later Than (NLT) 3 business days after the sending of this Request For Quotation (RFQ) to ensure timely award. The Government may, in its sole discretion, choose not to respond to questions received after the deadline. QUOTATION CONTENTS The contractor may provide a quotation as long as it meets the Government’s minimum solicited technical standards of this Request for Quotations Quotations shall comply with or clearly state, at a minimum, the following information: (1) Open Market or GSA Federal Supply Schedule (FSS) pricing. Quotations should state “open market” or should reference the applicable GSA/FSS number. (2) Expiration date of quoted and submitted prices. (3) Contractor’s Federal Tax I.D., CAGE code, and DUNS number. (4) Payment Terms will be Net 30 unless stated differently on the quote. (5) If available, please include your company’s published price list. (6) Include estimated shipping and handling if applicable. (7) Provide Manufacturer’s Name (8) Provide Country of Origin | 59% | Market Research | 11/19/2026 |
UT-Battelle, LLC is the management and operating contractor of Oak Ridge National Laboratory (ORNL). The Research Accelerator Division at ORNL is in need of Upgrade a Microscope for Fluorescence and Reflected-Light Imaging or equivalent. Please reference Attachment C- RFQ 494472 Bill of Materials. Attachments: - RFQ494472 - Attachment A- Terms and Conditions Purchase Order Commercial Products and Services - Attachment B- Prime Flowdown Clauses - Attachment C- RFQ494472 Bill of Materials - Attachment D- Reps and Certs Abbreviated -Exemption from Application of the Service Contract Labor Standards – Certain Services – CERTIFICATION – BSD-CS-2049 (08/2025) | 59% | Combined Synopsis | 11/20/2026 |
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2026-01 March 13, 2026. The provisions at 52.212-1, 52.212-3 and the clauses at 52.212-4, 52.212-5 apply to this acquisition; no addenda are attached. The Naval Surface Warfare Center (NSWC) Corona Division intends to use other than full and open competition to award a sole source Firm Fixed Price (FFP) contract to Toptica Photonics, Inc. This is an all-or-none requirement and partial quotes will be deemed unresponsive and will not be evaluated. The Government will award on a single purchase order to the responsible Offeror whose offer conforms to the requirements as stated in the Solicitation and is most advantageous to the Government based on the criteria listed in section L and section M of the Solicitation. Interested parties may identify their interest and capability to respond to the requirement, or by submitting capability statements. This notice of interest is not a request for competitive quotes. Offerors must be registered in SAM and all responsible sources may submit a quotation which, if timely received, will be considered by the Agency. Quotes are due no later than the response date in the posting. Responses/offers shall be submitted electronically, PDF or MS Word Format to email address in the posting. Any amendment(s) issued to this Request for Quote (RFQ) will be published on this website. Therefore, it is the Offerors responsibility to visit this website frequently for updates on this procurement. No telephone requests. | 59% | Combined Synopsis | 11/13/2026 |
Additional Details
Solicitation Number
NIST-NOI-25-7301803
Archive Date
Aug 16, 2025