Wavelength-locked laser systems
Archived on July 7, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM EDT
- Posted
- June 16, 2026
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 334516: Analytical Laboratory Instrument Manufacturing
- Agency
- Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
Notice details
- Office
- DEPT OF COMMERCE NIST
- Place of performance
- Gaithersburg, Maryland, 20899
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- NIST-RFQ-26-7701519
- Notice ID
- 5d3aa3c1cd5b45b5963a709c6b4e5568
Description
Amendment 01: The purpose of this amendment is to release questions and answers, as attached.
All other terms and conditions remain unchanged.
This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in Revolutionary FAR Overhaul (RFO) Part 12 - Acquisition of Commercial Products and Commercial Services as supplemented with additional information included in this notice.
THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION. QUOTATIONS ARE BEING REQUESTED AND A WRITTEN SOLICITATION DOCUMENT (i.e. STANDARD FORM) WILL NOT BE ISSUED.
This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through the RFO.
The associated North American Industrial Classification System (NAICS) code for this procurement is 334516 – Analytical Laboratory Instrument Manufacturing. The small business size standard of 1,000 Employees. This is a restricted small business set-aside competition. Only small businesses under the applicable NAICS code are eligible to respond.
DESCRIPTION OF REQUIREMENTS
Background
The National Institute of Standards and Technology (NIST) seeks to obtain two narrow-band, wavelength-locked laser systems. One system should be locked around 1530 nm, while the second system should be locked around 1550 nm. Locking is achieved through HCN reference cells. The wavelength/frequency locked laser systems will be used to measure the optical phase drift of deployed optical fibers in our metropolitan quantum network. Locking each system of two lasers to a specific wavelength with linewidth of around or less than 5 kHz will allow us to measure phase drift in optical fiber point-to-point, and not as usual accomplished by back-reflection at the far end and subsequent beating with the original laser beam. The intended use of these systems is to understand the feasibility of scalable phase stabilization approaches in quantum networks. The two narrow-band, wavelength-locked laser systems will further assist with NIST’s research of developing a moveable measurement test suite for quantum network component and protocol testing, verification, and characterization.
Objectives
The purpose of this acquisition is to obtain two narrow-band, wavelength-locked laser systems for use in quantum network research.
Scope of Work
Please see the attached Requirements Document.
PERIOD OF PERFORMANCE / DELIVERY REQUIREMENTS
The Contractor shall deliver all requirements within three (3) months after receipt of order. All required items shall be delivered FOB Destination.
CONTRACT TYPE & PAYMENT TERMS
A firm fixed price purchase order is anticipated.
APPLICABLE PROVISIONS AND CLAUSES
Please see the attached document for applicable provisions and clauses.
Addendum to FAR 52.212-1, Instructions to Offerors – Commercial Products and Commercial Services (DEVIATION April 2026):
QUESTION AND ANSWER PERIOD
CAR 1352.215-73 INQUIRIES (APR 2010):
Quoters must submit all questions concerning this solicitation in writing electronically to Mr. Collin Randall, Contract Specialist, at Collin.Randall@nist.gov and Ms. Lauren Roller, Contract Officer, at lauren.roller@nist.gov Questions must be received by or before Monday June 15, 2026, at 12:00 PM ET. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract.
(End of Provision)
DUE DATE FOR QUOTATIONS
All quotations must be submitted via email to Mr. Collin Randall, Contract Specialist, at Collin.Randall@nist.gov and Ms. Lauren Roller, Contract Officer, at lauren.roller@nist.gov. Submission must be received not later than Monday June 22, 2026, at 12:00 PM ET.
Note: Quoters must have an active registration at www.SAM.gov at time of offer submission to be considered for award. “ID Assigned” is not acceptable; registration must be “Active.”
Please reference the RFQ number in the subject line of all email communications. Quotations shall not be deemed received by the Government unless the quotation is received in the e-mail inboxes set forth above by the required date and time.
INSTRUCTIONS TO QUOTERS
Quotations shall be submitted electronically via email and shall consist of two volumes as detailed below. Each quotation volume shall include the Quoter’s name, System for Award Management Unique Entity Identifier (UEI) number, and point of contact information in a cover page, header/footer, or other easily identified location. The Contracting Officer intends to award a purchase order without discussions but reserves the right to enter into discussions if in the best interest of the Government.
The Quoter’s quotation shall be clearly divided into the following distinct volumes:
Volume I – Technical Quotation
Volume II – Price Quotation
Volume I: Technical Response
The Quoter shall submit one (1) copy of their technical response electronically via E-mail to the Contract Specialist and Contracting Officer identified above. The technical response shall not exceed five (5) single-spaced, single sided pages. Text shall be no less than 12-point font in read-only Microsoft Word or searchable Adobe PDF format. The technical quotation shall address the following:
- Technical description and/or product literature. Quoters shall include the manufacturer, make and model of the quoted product(s), manufacturer sales literature, or other product literature that CLEARLY DOCUMENTS that the quoted products meet or exceed all specifications outlined in the Statement of Requirements. The quoter is responsible for ensuring the submitted documentation clearly addresses all specifications and requirements. The quoter must not simply state they will meet or exceed the requirement; evidence must be provided.
- Country of origin of all manufactured end products quoted
- If applicable, evidence that the quoter is authorized by the manufacturer to sell the item(s) in the quotation.
- Confirmation of the quoter’s ability to meet the required delivery terms.
- Confirmation of the quoter’s ability to meet warranty requirements.
Volume II: Price Quotation
The quoter shall submit one (1) copy of their price quotation electronically via E-mail to the Contract Specialist and Contracting Officer identified above. The price quotation shall address, at minimum, the following information:
- The solicitation number
- The name, phone number, and email address of the quoter's/contractor’s point of contact;
- Unique Entity Identifier # for quoter's/contractor’s active SAM.Gov registration.
- A firm fixed price for each required line item, including a unit price and total amount where applicable, and the aggregate quoted firm fixed price for the requirement.
- FOB Destination Shipping and Delivery costs must be included in the quotation either as a separate line item or contained in the total price of the quote. The quotation shall include a total firm fixed price for the requirement that includes all shipping/delivery costs
- Any applicable discount terms.
Quoters that are proposing products manufactured outside of the United States must identify any other or unknown charges that may be applicable to the sale of these products as a separate line item. This price element may be listed as part of the cost of the product or as a sub-total element but must be clearly identified. This price element must only apply to the total value of the goods identified for customs processing. Only include the country of origin and the tariff percentage currently in place or the expected amount at time of delivery for that country. Price quotes shall clearly identify the relevant tariffs in terms of percentage and total cost. If there are multiple countries of origins and associated tariffs, identify each separately.
FAR 52.212-2 Evaluation- Commercial Products and Commercial Services (DEVIATION Jan 2026)
- Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Quoter whose quotation, conforming to the solicitation, is the lowest price technically acceptable quotation.
The Government intends to award a single firm fixed price purchase order (PO) from this solicitation utilizing simplified acquisitions procedures in accordance with FAR part 12 of the Revolutionary FAR Overhaul. The Government reserves the right not to award a PO and to make an award without discussions based solely upon initial quotes.
Basis for Award:
This requirement will be evaluated on the basis of Lowest Price Technically Acceptable (LPTA). Award will be made to the Quoter who submits a technically acceptable quotation at the lowest price amongst competitive quotations. A quotation will be determined technically acceptable if it meets the following criteria:
(1) Technical Capability: The Quoter must indicate in its quotation the ability to provide all minimum requirements identified in the Specifications document, as well as warranty requirements.
(2) Schedule: The Quoter must indicate in its quotation the ability to meet the delivery requirements of three months (90 days) ARO. Additionally, delivery must clearly be on an F.O.B Destination (or equivalent INCO Terms) basis and inclusive of all costs associated with delivery to NIST.
The Contracting Officer intends to make an award decision without discussions, but reserves the right to enter into discussions if in the best interest of the Government.
A quoter's failure to address any factor may be considered indicative of the quoter's lack of understanding of the Government's requirements and may result in the offer being determined unacceptable.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (4)
- Download
QA Laser systems.pdf
143 KBAdded in Combined Synopsis/Solicitation version 3Posted - Download
Locked Laser System.pdf
157 KBAdded in Combined Synopsis/Solicitation version 1Posted - Download
Solicitation Laser Systems.docx
36 KBAdded in Combined Synopsis/Solicitation version 1Posted - Download
Provisions and Clauses Laser Systems.docx
47 KBAdded in Combined Synopsis/Solicitation version 1Posted
Lifecycle
- 1Version 1Combined Synopsis/SolicitationArchived
Wavelength-locked laser systems
- 3Version 3Combined Synopsis/SolicitationArchivedCurrent
Wavelength-locked laser systems
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Please see attached. | - | Market Research | 11/20/2026 |
Sources Sought Notice for Graphite Furnace Atomic Absorption Spectrometer Notice ID: NIST-MML-FY27-SS01 Response Date: 11/28/2026 Product Service Code (PSC): 6640 NAICS Code: 334516 Background The Inorganic Chemical Metrology Group (ICMG) uses at least two measurement methods, each based on orthogonal physical principles, to certify the trace elements in candidate standard reference materials (SRM). These SRMs are intended for method validation and quality assurance in trace-element measurements to assess the nutritional value and contaminant status of agricultural products. A sensitive trace-element detector, a graphite furnace atomic absorption spectrometer (GFAAS) is sought to complement the group's inductively coupled plasma mass spectrometric (ICP-MS) measurement capability and fulfill the two independent method requirements for SRM development. Consideration will be given to GFAAS capable of direct solid-sample analysis to maximize its orthogonality relative to the liquid-sampling-based ICP-MS technique. Minimum Capabilities that NIST Requires and for Which Information is Being Requested The National Institute for Standards and Technology (NIST) located in Gaithersburg, MD is seeking information on vendors that are capable of providing a graphite furnace atomic absorption spectrometer (1) capable of measuring liquid test samples with an instrument detection limit (DL) for Cu at 0.02 µg/L or better (324.8 nm line, 50 µL sample volume, DL=3 x standard deviation of 10 replications) and (2) designed for direct introduction of solid state test samples into the graphite furnace for analyte quantification without a need of sample digestion Instructions for Responding to This Notice Parties that respond to this Notice are requested to submit the requested information via email in Microsoft Word, Adobe PDF, and/or Microsoft Excel format to the designated point(s) of contact whose name and email address appears at the bottom of this notice. Please provide only the information requested by this Notice, and do not include proprietary, classified, confidential, or sensitive information in a response to this Notice. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Information Requested in Response to This Notice: To help NIST with its market research, NIST is requesting that industry sources carefully review this notice and any attachments to it and voluntarily provide the following information: Company Summary Notice Identification: Notice ID and Title of this posting. Corporate Details: Company name, physical address, website address, and Unique Entity Identifier (UEI). Point of Contact (POC): Name, phone number, and email address. Company Size Standard: Your company’s size status relative to the NAICS code provided in this Notice. (Refer to the SBA Table of Small Business Size Standards). System for Award Management (SAM) Registration: Indicate whether your company has an active registration for procurement purposes in SAM.gov. Review the information included with this Notice, indicate whether there is anything that may inadvertently exclude domestically manufactured (made in the U.S.A.) end products from being considered; and indicate if anything included with this Notice could potentially be revised to improve the ability for domestic (“Made in America”) end products to be considered; and if a domestic end product is not currently available to meet the draft requirements/minimum specifications, please provide an estimated timeframe for when it may be domestically produced in the USA in the future if that appears to be likely. Information Regarding Commercial Products and Related Commercial Services Provide specifications, company name of the original equipment manufacturer, and the country of manufacture for commercial products and/or commercial services that your company is legally authorized to sell and that may meet NIST’s minimum requirements. Standard Commercial Pricing: Provide your company’s standard commercial pricing information for the requirements described in this Notice (including any Attachments) and explain what is included in those standard commercial prices. Estimated Price Range: You may provide an estimated price or estimated price range for the draft requirements included in this notice, including a brief explanation of how it was derived. Standard Commercial Terms and Conditions: Provide a copy of the standard commercial terms and conditions for the commercial products and/or commercial services identified in your company’s response to this Notice, including the nature and the duration of applicable standard commercial warranty(ies). Regulatory and Supply Chain Compliance Indicate whether your company could comply with RFO FAR clause 52.219-14 (Deviation JAN 2026) if this acquisition were to be set aside for small businesses (assuming that there is no waiver to the Nonmanufacturer Rule for the applicable NAICS code). Provide a brief supporting explanation. Existing Governmentwide Contract Vehicles Indicate whether your company has its own GSA Multiple Award Schedule (MAS) contract or other federal contract vehicle(s) under which NIST could award an order and, if so, provide the details of the contract(s) (contract number, Contracting Officer name/contact, SOW, terms and conditions, and price lists). Important Notes This Notice does not obligate the Government to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the chosen acquisition strategy. Responses received after the closing date for this Notice may not be considered. There is no solicitation available at this time. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. | - | Market Research | 11/28/2026 |
| - | Market Research | 12/05/2026 | |
please see attached. | - | Market Research | 12/03/2026 |
Answers to Questions attached. Questions are due by 11:00 AM Monday, 16 November 2026. The proposal due date has not been extended. | - | Solicitation | 11/23/2026 |
Additional Details
Solicitation Number
NIST-RFQ-26-7701519
Archive Date
Jul 7, 2026
Office Address
GAITHERSBURG, MD, 20899