Notice ID: 6259669aa65efcfbcb74f6583f7ab55dCombined Synopsis/Solicitation
Flight Grating for the EUNIS sounding rocket mission
Archived on January 1, 2022. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 11:00 PM UTC+02:00
- Posted
- May 2, 2016
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 333314: Classification Not Available
Notice details
- Place of performance
- NASA/Goddard Space Flight Center, Greenbelt, 20771
- PSC
- 66: INSTRUMENTS AND LABORATORY EQPT
- Last updated
- Jan 23, 2026
Identifiers
- Solicitation number
- NNG16583024R
- Notice ID
- 6259669aa65efcfbcb74f6583f7ab55d
Description
This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This notice is being issued as a Request for Quotations (RFQ). NASA/GFSC has a requirement for two Toroidal Varied Line Space (TVLS) diffraction gratings to operate at extreme UV/Soft X-ray wavelengths of 8.9-11.2 nm for the EUNIS sounding rocket mission: specifically, two high dispersion (0.65 degrees per nm) gratings (that is, 11400/m lines per mm, where m is the order) on 70x90 mm toroidal flight-quality substrates with the ratio of sagittal to tangential radii 0.99345 +/- 0.0001, average radius 769.65 +/- 1.0 mm, sagittal and tangential slope errors less than 1 arc second over spatial scales of 2 mm, figure error less than 35 nm RMS, and surface micro roughness of 0.2 nm or less on spatial scales of 10 to 1000 nm. The groove profile must have a blaze angle of 3.3 +/--0.1 degrees and theoretical groove (diffraction) efficiency greater than 30% in the order of interest. The grating front surface must permit the deposition of a high-stress (500 MPa) multilayer coating without significant changes in these specifications. Final gratings must be delivered with a conformance report detailing the metrology used for verification. The provisions and clauses in the RFQ are those in effect through FAC 2005-87 All responsible sources may submit an offer which shall be considered by the agency. Delivery to NASA's GFSC, Greenbelt, MD 20771 is requested by March 31, 2017. Delivery shall be FOB Destination. Offers for the items(s) described above are due by May 16, 2016 by 4pm EST to Shanita Boykin and must include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Offerors are encouraged to use the Standard Form 1449, Solicitation/Contract/Order for Commercial Items form found at URL: http://server-mpo.arc.nasa.gov/Services/NEFS/NEFSHome.tml If the end product(s) offered is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin. FAR 52.212-4 (MAY 2015), Contract Terms and Conditions-Commercial Items is applicable. FAR 52.212-5 (MAY 2016), Contract Terms and Conditions Required To Implement Statutes or Executives Orders-Commercial Items is applicable and the following identified clauses are incorporated by reference: 52.222-50, Combatting Trafficking in Persons (Mar 2015)(22 U.S.C. 7104(g); 52.219-28, Post Award Small Business Program Representation (Jul 2013)(15 U.S.C. 632 (a(2)); 52.222-3, Convict Labor (June 2003)(E.O. 11755); 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Feb 2016)(E.O. 13126); 52.222-21, Prohibition of Segregated facilities (Apr 2015); 52.222-26, Equal Opportunity (Apr 2015); 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014)(29 U.S.C. 793); 52.225-1, Buy American Act - Supplies (May 2014)(41 U.S.C. chapter 83); 52.225.13 Restrictions on Certain Foreign Purchases (June 2008) 9E.O.'s proclamations, and statutes administered by the Office of Foreign Assets control of the Department of the Treasury; and 52.232-34, Payment by Electronic Funds Transfer - Other than Central Contractor Registration (Jul 2013) (31 U.S.C. 3332) The FAR may be obtained via the Internet at URL: http://www.acquisition.gov/far/index.html The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/office/procurement/regs/nfstoc.htm All contractual and technical questions must be in writing (e-mail or fax) to Shanita Boykin not later than May 10, 2016 at 4pm, EST. Telephone questions will not be accepted. Selection and award will be made to the lowest priced, technically acceptable offeror. Technical acceptability will be determined by review of information submitted by the offeror which must provide a description in sufficient detail to show that the product offered meets the Government's requirement. NASA Clause 1852.215-84 (NOV 2011), Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html. Prospective offerors shall notify this office of their intent to submit an offer. Potential offerors will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any).
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Showing 1 of 1 items
Document | Source | Agency | Posted Date | File Size | Actions | |
|---|---|---|---|---|---|---|
| Combined Synopsis/Solicitation | SAM.gov | May 2, 2016 | - |
Lifecycle
Solicitation:
NNG16583024R- Combined Synopsis
- Combined SynopsisCurrentMay 2, 2016
Flight Grating for the EUNIS sounding rocket mission
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This is a combined synopsis/solicitation for commercial item prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. Naval Surface Warfare Center Indian Head Division (NSWC IHD), located in Indian Head, Maryland intends to award a firm fixed price (FFP) purchase order using Simplified Acquisition Procedures for: 65” Dual Heat Wide Formant Roll Laminator. This solicitation will be competed as a Brand Name or Equal, Small Business Set-Aside. This announcement constitutes the only solicitation. Quotes are being requested under Request for Quotation (RFQ) no. N0017427Q1002. The NAICS code is 333310 and the business size standard is 1000. The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2025-06 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20251701. The Government will award a contract resulting from this solicitation to the vendor responsible whose quote, conforming to the solicitation that will be most advantageous to the Government, price and other factors considered. The Government intends to evaluate all timely quotes received from eligible vendors on a lowest price technically acceptable (LPTA) basis. The Government intends to evaluate quotations and award a contract without discussions with quoters. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary. The Government will make award based on the availability of funds. Specifications: Laminator Series that delivers versatility, quality and economy all in one easy-to-use unit. The machine can laminate, encapsulate, and mount both vinyl and paper media. Its dual heated rollers can be controlled independently to temperatures up to 266ºF allowing for maximum adhesion for many applications. Operators can encapsulate using 1.5 – 10mil low melt films, cold laminate with PSA film, and board mount with just a few simple changeovers. Accepts film rolls to 10” OD on front and rear swing-out supply shafts for easier set-ups and fewer film changes and are available with a motorized rear rewind option for roll-to-roll applications. The swing up feed table and convenient 36” table height makes it easier for busy operators to stage multiple jobs. REQUIREMENTS Key requirements: Laminating Width up to 65" Dual Heated Rollers Adjustable Speed Control up to 13'/min Roller Gap Control allowing 1" Mounting Capability Web Clutch Adjustment Accommodates LOW MELT Laminating Film 1.5-10mil in Thickness/li> Two Swing-Out Shafts and Two Front Unwind Shafts Dual Tension Control Print Pressure Plate Installation Included 1 Year Mfr Warranty Parts and Labor Core Size – 3” Adjustable Temperature – Yes Moving Idler Bar – Yes Ready Light – Yes Mounting Capability – Yes (1”) Safety Approval – CE Roller Gap Adjustment - Yes Safety Shield – Yes Feed Table Alignment Guide – Yes Speed Feet Per Minute – 0 – 13 fpm Display Type - LCD Machine Dimensions – 69”W x 36” H X 49”D Electrical Requirements – 220V, 60Hz, 22 amps single phase: MAX 5700W Adjustable Speed Control – Yes Reverse Function – Yes Laminating Type – Hot/Cold Max. Laminating Width – 65” Warm up Time – 10 – 20 minutes Min/Max Film Thickness – 1.5 – 10 mil (Low Melt) Evaluation Factors (in order of importance) Technical – The Government will evaluate quotes on a Lowest Price Technically Acceptable (LPTA) basis. To be determined technically acceptable, the quote must clearly demonstrate compliance with all specifications listed under the "Requirements" section. Offerors proposing an "equal" product must submit descriptive literature, product data sheets, or technical specifications that explicitly verify the proposed machine meets or exceeds every key requirement. Price – Quotes must include all applicable costs. Submitted quotes are NOT TO EXCEED $350,000.00 (Simplified Acquisition Threshold). Questions/clarification regarding this solicitation must be submitted via email to Barbara Grinder @ barbara.j.grinder.civ@us.navy.mil by Wednesday 18 November 2026 by 4 PM EST. Quote packages are due by 24 November 2026 by 4 PM EST. (COB). Late quotes will not be considered. Please fill in clauses in RFQ as they apply to your business. Quote packages shall be sent to barbara.j.grinder.civ@us.navy.mil and contain a cover sheet that provides the following information: 1. Official Company Name; 2. Point of contact including name and phone number; and 3. DUNS number and Cage Code. The Points of Contact for this acquisition is: Barbara.j.grinder.civ@us.navy.mil | - | Combined Synopsis | 11/24/2026 |
This Request for Proposal (RFP) is for a one-time Firm-Fixed Price definite quantity purchase order. This procurement will be conducted under the procedures in FAR part 15 Contracting by Negotiation. This procurement is being solicited as other than Full and Open. The RFP is for the following Item: Nomenclature: CELL ASSEMBLY, OPTICAL INSTRUMENT NSN: 6650-01-676-1468 Accepted Part Numbers: 6439506-1 6439506 QTY: 80 The Approved Sources are DRS NETWORK & IMAGING SYSTEMS LLC CAGE code: 32865 Part Number 6439506-1 Raytheon Company CAGE code: 96214 Part Number 6439506. The statutory authority permitting other than full and open competition is 10 U.S.C. 3204(a)(1) as implemented by FAR 6.302-1. | - | Solicitation | 12/07/2026 |
The Veterans Health Administration (VHA) Non-Expendable Equipment National Program has identified the Combi Oven product line as a candidate for a VA-wide (otherwise referred to as “national”) Requirements contract. Combi Ovens are thermally insulated chambers used in cooking for warming, cooking, and baking food, typically fueled by either natural gas or electricity. Food service ovens have thermostatic controls, which turn the oven on and off and select the temperature at which the oven will operate, and, usually, a timer. Food service ovens may have complex, computer-based controls allowing a wide variety of operating modes. They may be freestanding or countertop units. The Contractor must demonstrate the ability to meet all requirements for the solicitation. The objective is to provide Combi Oven to be used by cooks within the VA medical centers and facilities, Continental United States (CONUS) and Outside the Continental United States (OCONUS). The period of performance is for a base of 12-months with four 12-month option periods. Please see the RFP and attachments for more information. | - | Solicitation | 10/21/2026 |
Solicitation N0042124Q0078 is issued as a combined synopsis/solicitation. The Government intends to purchase on a firm fixed-price basis and to solicit and negotiate the proposed purchase order on sole source basis with Atlanta Attachment Company, Inc., under the authority of FAR Part 12 and FAR Part 13. Offerors must be registered in the System for Award Management (https://www.sam.gov/sam/)database prior to submission of an offer to be considered for award of any DoD contract. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received by 5:00 (EST) on 2 January 2024 will be considered by the Government. A determination by the Government not to compete this proposed contract based upon the responses to this notice is solely within the discretion of the government. Information received will normally be considered for the purpose of determining whether to conduct a competitive procurement. The Government will not pay for any information received. Facsimile proposals are acceptable. For information contact: Cathleen Emmart, EMAIL: cathleen.m.emmart.civ@us.navy.mil Please provide the following information with your response. (1) FOB: ______________________ (2) Shipping Cost: ______________ (3) Tax ID# ____________________ (4) UEID# _____________________ (5) Cage Code: _________ You must be registered in System for Award Management (Sam.Gov) (6) Business Size: Small Business Yes or No (7) GSA or SEWP Contract # if applicable: ________________________ (8) Estimated delivery time after issuance of purchase order ____________________ (9) Published Price list. *YOU MUST SUBMIT SIGNED DOCUMENTATION FROM THE OEM VERIFYING YOU ARE AN AUTHORIZED DISTRIBUTOR* | - | Combined Synopsis | 01/02/2024 |
| - | Awarded | 09/27/2022 |
Additional Details
Solicitation Number
NNG16583024R
Archive Date
Jan 1, 2022