GovChime
Notice ID: 77ccf9f1c2c3360f46ecca82b143761dSolicitation

A--SIMULATION AND AIRCRAFT SERVICES

Archived on July 7, 2016. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
7:00 AM UTC+02:00
Posted
September 3, 2015
Notice type
Solicitation
NAICS
541330: Engineering Services

Notice details

PSC
A: RESEARCH AND DEVELOPMENT
Last updated
Dec 4, 2025

Identifiers

Solicitation number
NNL15544449R
Notice ID
77ccf9f1c2c3360f46ecca82b143761d

Description

The purpose of this notice is to provide potential offerors updated information regarding the Simulation and Aircraft Services (SAS) procurement strategy and identify key upcoming milestones. The anticipated release date of the Draft Request for Proposal (RFP) is on or about July 15, 2015 with an anticipated release date of the Final RFP posted approximately on August 17, 2015. A pre-solicitation conference is anticipated on or about July 23, 2015. The proposal due date is anticipated to be thirty (30) days after the release of the Final RFP. Previous information released regarding this procurement was posted under Simulation and Aircraft Services, Solicitation Number: SS-SAS-2015, located at the following URL: https://www.f bo.gov/spg/NASA/LaRC/OPDC20220/SS-SAS-2015/listing.html . The Government does not intend to acquire commercial item using Federal Acquisition Regulation (FAR) Part 12. The NAICS Code and Size Standard are 541330 and $15M, respectively. All responsible sources may submit an offer which shall be considered by the agency. NASA FAR Supplement (NFS) Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/p ub_library/Omb.html . The solicitation and any documents related to this procurement will be available over the Internet. These documents will reside on a World Wide Web (WWW) server, which may be accessed using a WWW browser application. The Internet site, or URL, for the NASA Business Opportunities home page http://procurement.na sa.gov/cgi-bin/EPS/bizops.cgi?gr=D&pin= . Prospective offerors shall notify this office of their intent to submit an offer. It is the offeror's responsibility to monitor the Internet site for the release of the solicitation and amendments (if any). Potential offerors will be responsible for downloading their own copy of the solicitation and amendments (if any). All questions shall be submitted in writing (e-mail) to Curtis Hyman at curtis.hyman@nasa.gov . Telephone questions will not be accepted. Please reference NNL15544449R Simulation and Aircraft Services (SAS) in any communications concerning this procurement.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Curtis Hyman, Contract Specialist, Phone 757-864-2473, Fax 757-864-7709, Email curtis.hyman@nasa.gov Curtis Hyman

Documents

No documents available.

Lifecycle

Solicitation:NNL15544449R
  1. Pre-Solicitation
  2. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. 5×
    Pre-SolicitationJul 7, 2015

    A--SIMULATION AND AIRCRAFT SERVICES

    Notice d420154fba8eaf92175042bcf02691bf on SAM.gov

  2. SolicitationCurrentSep 3, 2015

    A--SIMULATION AND AIRCRAFT SERVICES

    Notice 77ccf9f1c2c3360f46ecca82b143761d on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Naval Air Warfare Center Training Systems Division (NAWCTSD) is releasing this Sources Sought Notice for market research to identify capable firms that can provide V-22 aircraft software concurrency upgrades, systems integration, and associated engineering support for ground-based flight training devices. The anticipated effort will support up to 29 V-22 training devices worldwide and requires integration of aircraft software and simulator subsystems to maintain concurrency with the operational fleet. The purpose of this update is to extend the capability submission response deadline by fourteen (14) calendar days to accommodate ongoing Joint Certification Program (JCP) technical data access verifications. The response deadline is officially adjusted from Thursday, November 5, 2026, to Thursday, November 19, 2026, at 1600 EST. All other terms, conditions, and technical requirements remain unchanged.
75%
Market Research11/19/2026
The Pipeline and Hazardous Materials Safety Administration (PHMSA) Research and Development (R&D) Core Research Program announces this competitive solicitation for proposals focused strictly on Technology Transfer (T2) and Commercialization Advancement. The core objective of this Research Announcement is to accelerate the transition of high-impact pipeline safety innovations from advanced laboratory and operational prototypes to full-scale commercial deployment and operational field implementation across the Nation's energy transportation infrastructure. This solicitation specifically targets mature technologies at high Technology Readiness Levels (TRL 7–9) to bridge the critical 'implementation gap' by resolving final technical, regulatory, operational, credentialing, and market hurdles. Funding will only be awarded for projects that demonstrate a clear, definitive path to producing deployable technology, commercial products, or integrated service system ready for immediate market availability and pipeline operator adoption upon project completion.
55%
Combined Synopsis11/18/2026
AMENDMENT 0004: The purpose of this Amendment is to Change the Offer Due Date and answer Vendor Questions. AMENDMENT 0003: The purpose of this Amendment is to Extend the Offer Due Date. AMENDMENT 0002: The purpose of this Amendment is to Extend the Offer Due Date. AMENDMENT 0001: The purpose of this Amendment is to Answer Vendor Questions. SITE VISIT A site visit is scheduled for 11/5/2026 at 1:00 pm Local Time at 3551 Combine St., Paso Robles, CA 93446. Please provide the name and phone number for all attendees at least two (2) days prior to Bruce Kane, Bruce.CTR.Kane@faa.gov, Mobile: 817-300-6674. Information provided at the site visit, as well as answers to questions will not change/qualify the terms and conditions of the solicitation and specifications. Terms remain unchanged unless the solicitation is amended in writing. ************************************************************************************************************************************************** The Federal Aviation Administration (FAA) is issuing Screening Information Request (SIR) Number 697DCK-27-R-00022, Design Renovation, System Support Center (SSC), 3551 Combine St., Paso Robles, CA, 93446 as supplemented with additional information included in this notice. OFFER SUBMISSION Send your offer to Linda.Hennequant@faa.gov. Reference provision L02 REQUIRED DOCUMENTS for specific submission requirements. Please reference the Solicitation number in all correspondences to ensure prompt and proper processing. Emails with attachments that do not reference a SIR number in the subject line or the body of the message, will be disregarded to prevent the spread of computer viruses. BASIS OF AWARD The Government intends to make award based on successful negotiation of price and conformance with solicitation terms and conditions to the offeror that is considered to be the lowest priced, responsible offer. The Government will evaluate the Offeror’s proposed prices for fairness and reasonableness. Thank you for your interest in our procurement opportunity. ***ATTACHMENTS*** 1. RFP 697DCK-27-R-00022A, 48 pages 2. SOW - Paso Robles CA SSC Design, 3 pages 3. Paso Robles SSC DID 60226, 6 pages 4. Form Past Performance/Experience Info, 1 page
55%
Solicitation12/02/2026
REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT ANNOUNCEMENT DEPARTMENT OF THE NAVY Program Acquisition Executive Mission Systems (PAE MS) Capability Portfolio Executive Combat Systems & Fires (CPE CS&F) Integrated Combat System (ICS), PMW 630 SECTION 1: GENERAL INFORMATION Document Type: Request for Information (RFI) / Sources Sought Notice Solicitation / Reference Number: N6175027R1201 Contracting Activity: Navy PAE Mission Systems, Washington Navy Yard, DC Program Title: Surface Ship ICS Engineering and Integration North American Industry Classification System (NAICS) Code: 541330 – Engineering Services (Military and Aerospace Equipment and Military Weapons) Product Service Code (PSC): AC13 – R&D: Defense Systems: Weapons / R425 – Support - Professional: Engineering/Technical Response Due Date: 04 December 2026, 15:00 EST Classification Level: Primary document UNCLASSIFIED. Classified responses or annexes up to SECRET / NOFORN handled by separate coordination (see Section 7). SECTION 2: STATUTORY DISCLAIMER & SPECIAL NOTICE This RFI is issued solely for information and planning purposes in accordance with FAR 15.101(c). This notice does not constitute a Request for Proposal (RFP), Invitation for Bid (IFB), or an announcement of a forthcoming solicitation. Issuance of this notice does not obligate the Government to issue a formal solicitation or award a contract. The Government will not pay or reimburse any costs incurred by respondents in preparing, submitting, or demonstrating information in response to this notice. All submissions become Government property and will not be returned. Participation in this RFI is voluntary. Failure to respond will not preclude a vendor from participating in any future competitive acquisition, should one be released. Respondents may submit capability statements addressing any subset or all of the focus areas detailed herein. SECTION 3: BACKGROUND & PROGRAM CONTEXT 3.1 Background & Context Modern surface warfare requires rapid, modular capability delivery across the Navy's surface fleet. The Navy’s ICS program is making this vision a reality through use of virtualization, Kubernetes orchestration, and development of a common suite of mission applications enabling a "build once and deploy across the fleet" methodology for delivery of capability to frigates, destroyers, amphibious ships, aircraft carriers, future manned and unmanned vessels, and future foreign military sales vessels. The ICS program is conducting market research to identify industry partners capable of executing comprehensive systems engineering and software integration for U.S. Navy surface combat systems. This scope is currently being executed under the N00024-23-C-5117 contract awarded to Lockheed Martin Rotary & Mission Systems in September 2023. 3.2 Technical Scope & Baselines The technical scope spans current and next-generation baseline configurations running incremental deliveries of the Integrated Combat System (ICS) software stack (infrastructure services and tactical platform services) and common mission applications. Applicable ship deliveries include the following: ICS-Enabled AEGIS Combat System Baselines 9.C3+ and Baseline 10.1+ running on Mk6 Mod0/1 hardware with IaaS ORDALT or on Mk6 ModX hardware ICS-Enabled Ship Self-Defense System (SSDS) platforms FF(X) 3 and follow DDG 1000 class in line with delivery of the Zumwalt Enterprise Upgrade Solution (ZEUS) Future USN and FMS platforms SECTION 4: TECHNICAL REQUIREMENTS & CAPABILITY AREAS SOUGHT The Navy seeks detailed technical capabilities, corporate competencies, and innovative methodologies across eleven (11) functional areas. Vendors may respond to any or all of the following scope areas: Focus Area 1: Programmatic Engineering, Configuration Management & Governance Configuration Management (CM): Formulating, baselining, and executing Configuration Management Plans (CMP), software build/release planning, Configuration Control Boards (CCBs), and tracking and adjudicating Software Change Requests (SWCRs). Programmatic & Systems Planning: Developing, maintaining, and synchronizing project-level Roadmaps, Integrated Master Schedules (IMS), and capability delivery cadences. Focus Area 2: Systems Engineering & Requirements Architecture Technical Baseline Artifacts: Developing, updating, and managing formal engineering artifacts: Systems Engineering Plans (SEP). Software Development Plans (SDP) utilizing modern Agile/DevSecOps frameworks. System / Subsystem Definition Documents (SSDD). System / Subsystem Specifications (SSS). Software Product Specifications (SPS). Interface Requirements Specifications (IRS). Requirements Traceability Verification Matrices (RTVM) maintaining end-to-end bidirectional requirement-to-test traceability. System Safety Plans (SSP) conforming to MIL-STD-882E and naval weapon safety requirements. Requirements Allocation: Decomposing ICS, AEGIS, SSDS, and future combat system Top Level Requirements (TLR) into modular capability building blocks and subsystem specifications across surface ship classes (DDG 51, CG 47, FF(X), DDG 1000, L-Class, CVN, unmanned surface vessels, FMS variants, future platforms). Technical Leadership: Serving as lead technical authorities in Integrated Product Teams (IPTs), Working Groups (WGs), formal milestone reviews (SRR, PDR, CDR), and leading Technical Interchange Meetings (TIMs) to define and allocate interface requirements. Force-Level Mission Thread Analysis: Evaluating complex, distributed kill-chain mission threads, establishing functional allocations, and resolving tactical latency challenges. ICS Re-Architecture & Model-Based Systems Engineering (MBSE): Authoring SysML/UML MBSE models and leading modular product development across the ICS Domain Architecture. Sensor Management. Vehicle Management. Information Management. Training Management. Tactical Decision Management. External Communications Management. Weapon Management. Display Management. Infrastructure Services. Focus Area 3: Fleet Data Analysis, Feasibility Studies & Gap Assessment Conducting engineering feasibility studies, system performance assessments, and trade studies for capability insertion across diverse ship classes and configurations. Extracting, parsing, and analyzing live fleet exercise data, weapon telemetry, and real-world tactical events to identify performance anomalies and drive capability enhancement. Assessing combat system shortfalls, bottlenecks, and operational gaps, and designing/evaluating candidate architectural and software modifications to close these gaps. Focus Area 4: Tactical Software Design, Coding, Testing, and Integration Combat System Design activities including analysis and algorithm development Mission software development, unit testing, and component integration. Cloud-based and Hardware-in-the-Loop (HWIL)-based testing to include element integration, subsystem testing, and system testing System Integration: Engineering and integrating software interfaces for specific sensor, weapon, and C2 programs and capabilities, including but not limited to: Patriot Advanced Capability-3 Missile Segment Enhancement (PAC-3 MSE) The Standard Missile (SM) Family of weapons (including all Air Defense, Ballistic Missile Defense, and Extended Range Active Missile variants) MK-41 VLS-compatible canister-launched weapons (including Evolved SeaSparrow Missile (ESSM), Tomahawk Land Attack Missile (TLAM), and Vertical Launch ASROC (VLA) Rolling Airframe Missile (RAM) Electronic Warfare (EW) systems Phased array and rotating radar systems Evolving to common track management solution across AEGIS and SSDS configurations Containerized payloads Tactical Virtualization Configurations: Designing, provisioning, benchmarking, and troubleshooting virtualized tactical hardware/software configurations and hypervisor-to-bare-metal runtime environments. Focus Area 5: Hardware/Software Tech Stack, Microservices & System-of-Systems Integration Third-Party Software & Microservices: Evaluating commercial and third-party software products, conducting compliance refactoring, and defining standardized, ICS-compliant APIs to support microservices orchestrated via Kubernetes. Hypervisor Integration: Integrating and tuning alternate hypervisors (e.g., VMware ESXi, KVM, bare-metal container engines) to meet strict real-time deterministic performance requirements. Full-Stack System-of-Systems (SoS): Ensuring the integrated tech stack (hardware compute blades, switching fabric, hypervisors, orchestrators, microservices, and tactical applications) fulfills holistic combat system operational requirements. Leading technical forums to establish cross-contractor deliverable interfaces, lead-ship integration agreements, and deployment schedules. Focus Area 6: Modeling & Simulation (M&S) Developing, maintaining, validating, and updating high-fidelity simulations and functional simulators. Conducting system-level, ship-level, and force-level performance simulations, radar cross-section/propagation trade studies, and engagement dynamics modeling to validate tactical algorithms. Focus Area 7: Cybersecurity Engineering, IA & Program Protection Cyber Systems Engineering: Refactoring heritage combat system code to contemporary cybersecurity baselines, integrating modern defensive cyber tools, and ensuring zero loss of tactical capability during cyber retrofits. Information Assurance (IA) Compliance: Enforcing DoD, DoN, and NAVSEA security policies; documenting DoD Instruction (DoDI) 8510.01 Risk Management Framework (RMF) security controls. Model-Based ATO & Cross Domain Solutions: Supporting technical reviews and data calls for Cross Domain Solutions (CDS); driving the transition to model-based RMF Authorization to Operate (ATO) artifact generation. Vulnerability Scanning & Red Team Support: Executing continuous vulnerability management (ACAS, SCAP), static/dynamic code analysis (e.g., SonarQube, Fortify), supporting Red Team assessments, and implementing automated STIG remediation workflows. Program Protection & Fleet Readiness: Authoring Program Protection Plans (PPP); identifying fleet cyber operational and response training shortfalls and recommending tooling enhancements; leading Cyber TIMs with Participating Acquisition Resource Managers (PARMs). Focus Area 8: Verification, Validation & Automated Testing Automated Test Architecture: Authoring test strategies, detailed verification plans, and scripts emphasizing automated testing across unit, component, capability, and system levels. Multi-Tier Testing Execution: Executing and supporting testing to include unit/component testing, integration testing, multi-element integration testing, regression testing, stability testing, functional, system test and evaluation, and fleet acceptance testing. Certification & Maintainability: Supporting government-led maintainability evaluations. Defining, capturing, and verifying Objective Quality Evidence (OQE) to support formal combat system certification. Defect Adjudication: Verifying software problem resolutions and supporting hardware failure reporting, analysis, and corrective action systems (FRACAS / Trouble Reporting). Focus Area 9: Land-Based Test Site & Shipboard Installation Support Land-Based Test Site (LBTS) Engineering: Providing on-site systems engineering, software loading, and live test support at locations including the Combat Systems Engineering Development Site (CSEDS) in Moorestown, NJ; and Surface Combat Systems Center (SCSC) in Wallops Island, VA. Major Test Events: Preparing for and executing critical test events at land-based ranges and on underway ships. Shipboard Installation: Executing shipboard installation across naval shipyards and bases, including software infrastructure installation, tactical software installation, network configuration, interface checkout, and combat system light-off. Focus Area 10: Fleet Training Systems & Instructional Design Performing Job Duty Task Analysis (JDTA) and Front End Analysis (FEA) to define sailor instructional requirements for modernized tactical systems. Developing, maintaining, and updating training curricula, student guides, and tactical job aids. Executing and coordinating factory, pilot, and schoolhouse training courses across Surface Combat Systems Training Command (SCSTC) locations. Focus Area 11: Technical Documentation & Interactive Manuals (IETMs) Modernizing traditional technical publication pipelines toward dynamic, S1000D-compliant Interactive Electronic Technical Manuals (IETMs) and Quick Reference Guides (QRGs). Providing technical writing support to translate complex software architectures and engineering data into standard operating procedures and maintenance manuals. Investigating, adjudicating, and incorporating fleet-submitted Technical Manual Deficiency / Evaluation Reports (TMDERs). SECTION 5: INSTRUCTIONS TO RESPONDENTS & QUESTIONNAIRE Interested industry partners are requested to submit responses organized into the following four (4) distinct parts: Part 1: Corporate Profile & Administrative Information (Max 3 Pages) Administrative Data: Company Name, Commercial and Government Entity (CAGE) Code, Unique Entity Identifier (UEI), physical address, website, and designated Points of Contact (POC) for technical and contractual matters. Business Size & Socioeconomic Status: Business classification under NAICS 541330; small business designations (e.g., Small Business, 8(a), HUBZone, SDVOSB, WOSB). Facility & Personnel Clearances: Current Facility Security Clearance (FSL) level; Secret/Top Secret safeguarding capability; availability of cleared key personnel. Existing Contract Vehicles: Active prime contracts (e.g., SeaPort-NxG, GSA OASIS/MAS, or agency-specific MACs) suitable for this scope. Part 2: Technical Approach, Scope Competency & Innovation (Max 25 Pages) Respondents must address their specific competencies, technical approaches, and innovative capabilities against the requirements in Section 4. Vendors may respond to any or all of the functional areas. Scope Coverage & Technical Competency: Clearly delineate which of the eleven (11) Focus Areas your organization has the core capability to execute (as a prime or via teaming). Detail your technical approach, corporate experience, and past performance (within the past 5 years) supporting AEGIS, SSDS, ICS re-architecture, modern weapon and sensor integration, and other real-time / mission-critical engineering and integration efforts. Super Intelligence (SI) & Advanced Automation Integration: Describe your organization's specific technical approach to utilizing SI and generative/agentic tools. Provide concrete examples or proposed concepts where SI can be applied across the lifecycle—such as automated test script generation and test execution, automated code refactoring, telemetry and fleet data anomaly detection, MBSE artifact generation, cyber vulnerability triage/STIG scanning, or dynamic IETM/training curriculum updates. Virtualization Experience: Detail your experience deploying workloads in virtualized and Kubernetes- orchestrated environments; abstracting hardware dependencies; and integrating mission critical software in environments demanding high reliability and low latency. Part 3: Industry Barriers to Entry & Risk Identification (Max 5 Pages) The Navy is committed to fostering competition, removing friction, and accelerating delivery timelines. Respondents are requested to identify: Technical & Resource Barriers: Identify key barriers to entry, technical hurdles, or constraints that may prevent your firm from successfully performing any of the 11 focus areas identified above, within required delivery timeframes (e.g., specialized software/hardware tool access, facility/lab access, proprietary interfaces, legacy codebase familiarity). Government Furnished Information / Property / Computer Programs (GFI/GFE/GFCP): Specific GFI, GFE, GFCP; developer environment credentials; test facility availability required to de-risk onboarding and ensure parity. Personnel & Security Bottlenecks: Security clearance onboarding latency, specialized labor skill shortfalls, or site access restrictions that present schedule risks, along with suggested government mitigation strategies. Part 4: Acquisition Strategy, Contract Structuring & ROM (Max 7 Pages) Contract Type & Structuring Recommendations: Provide industry perspectives and recommendations on optimal contract type (e.g., Cost-Plus-Fixed-Fee, Cost-Plus-Incentive-Fee, Firm-Fixed-Price) and acquisition approach (e.g., Other Transaction Authority (OTA), FAR-based contract, Multiple Award Contract Indefinite Delivery / Indefinite Quantity (MAC IDIQ)). Additionally, address how technical scope could be performed under fixed-price, outcome-based contract line items, along with any perceived risks and tradeoffs of this approach. Discuss how Contract Line Item Numbers (CLINs) or Task Areas should be structured to balance agile, iterative software delivery to Fleet with traditional milestone-driven waterfront installations and systems engineering documentation. Recommend incentive structures (e.g., award fees tied to automated test coverage, escaped defect reduction, or schedule acceleration) that align industry motivation with Navy operational velocity. Teaming & Subcontracting: Proposed teaming arrangements, joint ventures, or specialized subcontractors to cover the multi-disciplinary scope. SECTION 6: SUBMISSION GUIDELINES Format: Submissions must be delivered in searchable Adobe PDF or Microsoft Word format. Standard 8.5 x 11-inch layout, 1-inch margins, minimum 11-point font (graphics, tables, and architectural diagrams may use minimum 9-point font). Total submission must not exceed 40 pages across all four parts (excluding Title Page, Table of Contents, and Acronym Table). Delivery Instructions: Responses must be submitted via email to the Contracting Officer and Contract Specialist listed below with the subject line: "Response to RFI [N6175027R1201] - Surface Combat Systems Engineering and Integration - [Company Name]". For attachments exceeding 10MB, respondents must coordinate secure file delivery via the DoD SAFE application (https://safe.apps.mil/). Submission Deadline: All responses must be received no later than 04 December 2026, 15:00 EST. SECTION 7: PROPRIETARY MARKINGS & SECURITY HANDLING Proprietary Markings: If a response contains business-sensitive, trade secret, or proprietary information, it must be explicitly marked on each page. The Government will protect properly marked data from unauthorized disclosure. Non-Government Evaluators: The Navy may utilize Federally Funded Research and Development Centers (FFRDCs) and System Engineering and Technical Assistance (SETA) contractors to assist in reviewing responses. All support personnel are bound by non-disclosure agreements (NDAs) and organizational conflict of interest (OCI) rules. Respondents wishing to establish proprietary information agreement(s) with non-Government evaluators must clearly declare this in their Part 1 submission. Responses must be UNCLASSIFIED. SECTION 8: GOVERNMENT POINTS OF CONTACT Contracting Officer: Name: Ryan Brophy Email: ryan.p.brophy.civ@us.navy.mil Command: Navy PAE Mission Systems Contract Specialist: Name: Ashley Mathew Email:ashley.mathew2.civ@us.navy.mil Command: Navy PAE Mission Systems Program Office Representative: Name: Rick Jandrain Email:richard.r.jandrain.civ@us.navy.mil Command: Navy PAE Mission Systems, PMW 630
55%
Market Research12/04/2026
NASA/GSFC intends to extend the period of performance for a period of six (6) months and increase the maximum ordering value of Contract 80GSFC25D0003, Program Analysis and Control (PAAC V) Bridge with ASRC Federal System Solutions (AFSS). The PAAC V Bridge contract provides accounting, planning and scheduling/earned value management, documentation management, configuration management and security compliance. The place of performance for PAAC V Bridge is the NASA Goddard Space Flight Center (GSFC) Facilities and Installations, NASA Headquarters (HQ), Langley Research Center, and other NASA Centers, as needed. NASA/GSFC intends to extend the ordering period for six (6) additional months from December 1, 2026, to May 31, 2027, and increase the maximum ordering value of the PAAC V Bridge contract to ensure uninterrupted support until the follow-on competitive contract is awarded and contract transition is completed. The proposed increase of $20.24M will revise the contract maximum ordering value from $180,000,000 to $200,240,000. This procurement action is being conducted on a sole source basis in accordance with FAR 6.302-1 and 10 U.S.C. 3204(a)(1). As the incumbent contractor, AFSS is uniquely qualified to provide the services required. AFSS is considered the only contractor that can meet GSFC’s needs, without disruption to current programs and services, given the short amount of time remaining under the current contract. These services function as integral parts of all the aforementioned NASA missions. The skills required to support such critical missions and milestones cannot be readily replaced. Award to any other source for this period would delay NASA/GSFC’s missions. The government does not intend to acquire a commercial item using FAR Part 12. This notice is not a request for competitive proposals. However, interested organizations may submit their capabilities and qualifications to perform the effort electronically via email to Cynthia White at Cynthia.L.White@nasa.gov no later than 4:30pm local time on November 27, 2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed acquisition on a full and open competition basis, based on responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NASA Clause 1852.215-84 Ombudsman is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf
55%
Special Notice11/27/2026

Additional Details

Solicitation Number

NNL15544449R

Archive Date

Jul 7, 2016