GovChime
Notice ID: 63f002a8be2ef1f23f84537e60faf4ceCombined Synopsis/Solicitation

Various Hardeware

Archived on February 15, 2017. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
8:00 PM UTC+01:00
Posted
January 26, 2017
Notice type
Combined Synopsis/Solicitation
NAICS
423830: Industrial Machinery and Equipment Merchant Wholesalers

Notice details

PSC
53: HARDWARE AND ABRASIVES
Last updated
Dec 4, 2025

Identifiers

Solicitation number
NNX17614540Q
Notice ID
63f002a8be2ef1f23f84537e60faf4ce

Description

National Aeronautics and Space Administration NASA Shared Services Center Stennis Space Center, MS 39529-6000 1/26/2017 SUBJECT: Request for Quotation (RFQ) NNX17614540Q, Various Hardware This solicitation includes the following sections: 1. Bid Schedule- Section 1 2. Instructions to Offerors - Section 2 3. Solicitation Provisions/Representations and Certifications - Section 3 4. Clauses/Terms and Conditions - Section 4 5. Quote Evaluation Criteria - Section 5 SECTION 1 BID SCHEDULE Part No QTY Length Units Description Plating 15 Series 1530 1530 40 1.5x3x242 inches 1530 stock length 20' 15 series un-anodized 1530 1530 50 1.5x3x145 inches 1530 stock length 12' 15 series un-anodized 1530 1530 20 1.5x3x97 inches 1530 stock length 8' 15 series un-anodized 1515 1515 20 1.5x1.5x145 inches 1515 stock length 12' 15 series un-anodized 3030 3030 10 3.0x3.0x97 inches 3030 stock length 8' 15 series un-anodized Fasteners screw 3330 5000 0.687 inches FBHSCS 5/16-18 flanged button head socket cap screw Black Zinc nut 3203 3000 na na Black zinc Standard slide in T-nut 5/16-18 (15 series) Black Zinc nut 3917 1000 na na Black Zinc roll in T nut 5/16-18 with ball (15 series) Black Zinc nut 13055 1000 na na self align slide in T-nut with ball 5/16-18 (15 series) nut 13098 1000 na na self aligning roll in T-nut 5/16-18 (15 series) nut 13040 1000 na na self aligning roll in T-nut 5/16-18 with ball (15 series) nut 3088 100 na na black zinc double slide in t nut 5/16-18 (15 series) Black Zinc anchor 3360 3000 na na Anchor Fastener 5/16-18 x 1.3" slide in nut (15 series) butt 3370 100 na na Butt Fastener (15 series) cable tie 12316 5000 na na Cable tie mounting block (15 series) screw 3011 500 0.5 inches 5/16-18 .500 long Flat head socket cap screws Black Zinc screw 3410 500 0.625 inches .625 long Black Zinc screw 3411 500 0.75 inches .750 long Black Zinc screw 3012 500 0.375 inches 1/4-20 .375 long Flat head socket cap screws Black Zinc screw 3400 500 0.5 inches .500 long Black Zinc screw 3405 500 0.625 inches .625 long Black Zinc screw 3406 500 0.75 inches .750 long Black Zinc screw 3106 500 0.5 inches 5/16-18 .500 long Socket head cap screws Black Zinc screw 3110 500 0.625 inches .625 long Black Zinc screws 3112 500 0.75 inches .750 long Black Zinc screws 3122 500 1 inches 1.00 long Black Zinc screws 3119 500 0.875 inches .875 long Black Zinc screws 3058 500 0.375 inches 1/4-20 .375 long socket head cap screws Black Zinc screws 3062 500 0.5 inches .500 long Black Zinc screws 3067 500 0.625 inches .625 long Black Zinc screws 3064 500 0.75 inches .750 long Black Zinc screws 3068 500 0.875 inches .875 long Black Zinc screws 3071 500 1 inches 1.00 long Black Zinc Feet foot mnt 2365 20 1.5x3.0 inches 3 hole center tap base plate for 1530 w/ 3/4"-10 tap (15 series) anodized foot 2202 20 2 inches Deluxe leveling foot 3/4"-10 thread (15 series) anodized foot mnt 2367 10 3.0x3.0 inches 4 hole corner tap baseplate for 3030 w/ 3/4"-10 tap one corner anodized Caster 2716 10 3.5 x 3.5 inches self leveling casters caster mnt 2409 10 4x4 inches attaches casters to 80/20 members anodized Brackets bracket 4338 50 3x3 inches 8 hole inside gusset corner bracket (15 series) un-anodized plate 4370 24 3x9x6 inches 16 hole cross joining plate un-anodized plate 4360 0 12 hole cross joining plate un-anodized plate 4355 0 inches 8 hole Tee Plate un-anodized plate 4365 150 3x6 inches 8 hole joining plate un-anodized bracket 4375 50 6 hole inside corner bracket un-anodized bracket 4414 50 4.5x4.5x2.8 inches 12 hole inside corner bracket (15 series) un-anodized bracket 4302 250 na na 2 hole inside bracket un-anodized bracket 4303 150 na na 4 hole inside corner bracket un-anodized bracket 4375 150 na na 6 hole inside corner bracket un-anodized bracket 4304 100 na na 8 hole inside corner bracket un-anodized plate 4305 150 na na 4 hole joining strip un-anodized plate 4481 150 na na 5 hole (L) joining strip un-anodized plate 4480 100 na na 5 hole (T) joining strip un-anodized Tools tools 6000 10 na na 3/16 T handle ball end hex wrench tools 6030 10 na na 1/4 T handle ball end hex wrench tools 6110 10 na na 5/32 T handle ball end hex wrench tools 6160 5 na na 9/16 Anchor fastener counterbore cutter tools 6060 5 na na 13/16 Anchor fastener counterbore cutter 15 Series 45 support 45 2525 50 6" inches 1515 45 degree support 6" long un-anodized 45 2535 50 12" inches 1515 45 degree support 12" long un-anodized 45 2545 30 18" inches 1515 45 degree support 18" long un-anodized Other hinge 2085 20 na na Aluminum Hinges (15 series) anodized slide 2051 20 na na Top Mount Teflon Slides (15 series) bearing 6534 10 na na Linear Bearing with Brake Holes (15 series) brake 6800 10 na na Linear Bearing Brake Kit (15 Series) endcap 2045-plain 100 na na 1530 plain endcap black endcap 2030-plain 50 na na 1515 plain endcap black 10 Series nut 3204 2000 na na Black zinc standard T nut 1/4-20 (10 series) Black zinc nut 3923 500 na na Black zinc Roll in T nut 1/4-20 with ball (10 series) Black zinc nut 3791 500 na na Black zinc Roll in T nut with rubber handle (10 series) Black zinc nut 3395 50 na na Anchor Fastener 1/4-20 x .75" slide in nut (10 series) nut 3369 50 na na Butt fastener (10 series) nut 3280 100 na na black zinc Double T nut 1/4-20 (10 series bracket 4108 250 na na 2 hole 1/8" thick inside bracket (10 series) anodized bracket 4119 250 na na 2 hole 1/4" thick inside bracket (10 series) anodized bracket 4265 250 na na 2 hole slotted inside bracket (10 series) anodized bracket 4134 100 na na 4 hole inside gusset corner bracket (10 series) anodized plate 4117 250 na na 4 hole joining strip (10 series) anodized plate 4165 250 na na 8 hole joining strip (10 series) anodized plate 4081 250 na na 5 hole (L)joining plate (10 series) anodized plate 4080 250 na na 5 hole (T) joining plate (10 series) anodized bracket 4138 50 2x2 inches 8 hole inside gusset corner bracket(10 series) anodized hinge 2086 50 na na Aluminum Hinges 10 series anodized slide 2059 50 na na Top Mount Teflon Slides (10 series) 45 2565 40 6" na 1010 45 degree support 6" (10 series) anodized Delivery Address: NASA/Marshall Space Flight Center Central Shipping and Receiving Bldg 4631, Saturn Rd Huntsville, AL 35812 Deliver by: 03/17/17 SECTION 2 INSTRUCTIONS TO OFFERORS Quotes for the item(s) described in the RFQ are due by 1/31/2017 by 1:00 p.m. CT to Philip M. Pearson at Philip.m.pearson@nasa.gov in order to be considered for award. If it is in the best interest of the Government, quotes submitted after the due date may be accepted. Or equal to products or services can be quoted and will be evaluated to determine if they meet technical acceptability of the requirement(s) in this RFQ. Quotes will remain valid for 30 days unless otherwise expressly stated on the quote. All contractual and technical questions must be in writing (e-mail) to Philip M. Pearson at Philip.m.pearson@nasa.gov no later than 1/30/2017 by 1:00 p.m. CT. Telephone questions shall not be accepted. The NAICS Code for this procurement is 423830. The Offeror shall state in their offer their size status for this procurement. This procurement is set aside for small business Offeror's shall be registered at www.sam.gov and have the NAICS code listed above in order to be considered for award. Submitted offers shall be F.O.B Destination for this procurement. Offers submitted on a basis other than F.O.B, Destination will be rejected as nonresponsive. SECTION 3 SOLICITATION PROVISION/REPRESENTATIONS AND CERTIFICATIONS ?52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): FAR http://farsite.hill.af.mil/vffara.htm NFS http://farsite.hill.af.mil/vfnasaa.HTM FEDERAL ACQUISITIONI REGULATION (FAR) PROVISIONS INCORPORATED BY REFERENCE: ?52.204-07 System for Award Management (Jul 2013) ?52.204-16 Commercial and Government Entity Code Reporting (Jul 2015) ?52.204-17 Ownership or Control of Offeror (Nov 2014) ?52.209-02 Prohibition on Contracting with Inverted Domestic Corporations - Representation (Nov 2015) ?52.225-25 Prohibition on Contracting with Entities Engaging in Sanctioned Activities Or Transactions Relating to Iran - Representation and Certifications (Oct 2015) ?52.223-1 Biobased Product Certification (May 2012) ?52.211-6 Brand Name Or Equal (Aug 1999) FAR PROVISISIONS IN FULL TEXT: ?52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS-COMMERCIAL ITEMS (JUL 2016) The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Website located at https://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (r) of this provision. (a) Definitions. As used in this provision- "Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. "Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner. "Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees. "Inverted domestic corporation", means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). "Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except- (1) PSC 5510, Lumber and Related Basic Wood Materials; (2) Product or Service Group (PSG) 87, Agricultural Supplies; (3) PSG 88, Live Animals; (4) PSG 89, Subsistence; (5) PSC 9410, Crude Grades of Plant Materials; (6) PSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) PSC 9610, Ores; (9) PSC 9620, Minerals, Natural and Synthetic; and (10) PSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. "Predecessor" means an entity that is replaced by a successor and includes any predecessors of the predecessor. "Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate- (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. "Sensitive technology"- (1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically- (i) To restrict the free flow of unbiased information in Iran; or (ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and (2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)). "Service-disabled veteran-owned small business concern"- (1) Means a small business concern- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. "Small disadvantaged business concern", consistent with 13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that- (1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by- (i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and (ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and (2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition. "Subsidiary" means an entity in which more than 50 percent of the entity is owned- (1) Directly by a parent corporation; or (2) Through another subsidiary of a parent corporation. "Veteran-owned small business concern" means a small business concern- (1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. "Successor" means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances. "Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern- (1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and (2) Whose management and daily business operations are controlled by one or more women. "Women-owned small business (WOSB) concern eligible under the WOSB Program" (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAM website. (2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through http://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ______________. [Offeror to identify the applicable paragraphs at (c) through (r) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.] (c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it [ ] is, [ ] is not a small business concern. (2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [ ] is, [ ] is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it o is, o is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, that it [ ] is, [ ] is not a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [ ] is, [ ] is not a women-owned small business concern. (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that- (i) It [ ] is,[ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: __________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation. (7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that- (i) It [ ] is, [ ] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: __________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold. (8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [ ] is a women-owned business concern. (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____________________________________ (10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that- (i) It [ ] is, [ ] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and (ii) It [ ] is, [ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation. (d) Representations required to implement provisions of Executive Order 11246- (1) Previous contracts and compliance. The offeror represents that- (i) It [ ] has, [ ] has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and (ii) It [ ] has, [ ] has not filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that- (i) It [ ] has developed and has on file, [ ] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 cfr parts 60-1 and 60-2), or (ii) It [ ] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American-Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item" "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies." (2) Foreign End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g) (1) Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." Other Foreign End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Canadian End Products: Line Item No. _______________________________________ _______________________________________ _______________________________________ [List as necessary] (3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Canadian or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (4) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Tra...

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Will C. Garrett
Contracting Officer

Documents

No documents available.

Lifecycle

Solicitation:NNX17614540Q
  1. Combined Synopsis
  1. Combined SynopsisCurrentJan 26, 2017

    Various Hardeware

    Notice 63f002a8be2ef1f23f84537e60faf4ce on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

NNX17614540Q

Archive Date

Feb 15, 2017