Notice of Award and Posting of Sole Source Justification
Awarded on June 11, 2026. Full description on SAM.gov.
Overview
- Posted
- June 23, 2026
- Notice type
- Award Notice
- Agency
- Nuclear Regulatory Commission
Notice details
- Office
- NUCLEAR REGULATORY COMMISSION
- Place of performance
- Rockville, Maryland
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
- Award date
- Jun 11, 2026
- Award amount (SAM.gov award notice)
- $875.9K
Identifiers
- Solicitation number
- NSIR-26-0032
- Notice ID
- 98a419a28365492b90a5040901875c68
- Award number (PIID)
- 47QTCB21D0153
Description
This bridge task order was issued under the contractor’s GSA Federal Supply Schedule Contract No. 47QTCB21D0153. The order was awarded on a sole source basis in accordance with the Revolutionary FAR Overhaul Federal Supply Schedule Ordering Procedures at GSAR 538.7104-3(b)(1)(ii).
The attached Sole Source Justification, formerly commonly referred to as a Limited Sources Justification, supports the agency’s determination that award to Clark Baty Associates Inc is in the interest of economy and efficiency because the bridge task order is a logical follow-on.
The bridge task order is necessary to ensure continuity of critical services while the agency completes the follow-on acquisition. Award to any other contractor during this short bridge period would result in unnecessary transition costs, duplication of effort, performance risk, and potential disruption to ongoing agency operations. The incumbent contractor is currently performing the requirement, possesses the necessary knowledge of the agency’s systems, processes, and ongoing workload, and is positioned to continue performance without interruption.
Award Overview
Award Number
47QTCB21D0153
Award Amount (SAM.gov award notice)
$875.9K
Award Date
Jun 11, 2026
Awardee
Awardee Address
Washington, DC 20036, UNITED STATES
Delivery Order Number
31310026F0042
Original Solicitation
Notice ID: 98a419a28365492b90a5040901875c68
Posted Date: Jun 23, 2026
Original Response Deadline: Not specified
Contract Details
No FPDS record matches this award number at the same department yet
Contract details typically appear within 2-4 weeks after award; DoD awards are published about 90 days after signature.
Task Orders Under This IDV
Top 10 by total obligated
- $1.5MSigned Jul 24, 2026
- $1.5MSigned Mar 10, 2026
- $875.9KSigned Sep 18, 2026
- $818.8KSigned Jul 22, 2025
- $547.4KSigned Feb 14, 2025
- $544.7KSigned Jun 11, 2026
- $347.8KSigned Mar 14, 2024
More From This Vendor
Top 5 most recent
- —Signed Nov 3, 2025
- —Signed Mar 31, 2025
Contacts
Contracting Officer
Primary Contact
Documents
Files (1)
- Download
Sole Source Justification__47QTCB21D0153_31310026F0042_Redacted.pdf
697 KBAdded in Award Notice version 3Posted
Lifecycle
- 3Version 3Award NoticeArchivedCurrent
Notice of Award and Posting of Sole Source Justification
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
THE U. S. NUCLEAR REGULATORY COMMISSION (NRC) is issuing this Sources Sought Synopsis as a means of conducting market research or as a market survey to determine the availability and potential technical capability of the business community to provide all management, supervision, administration, and labor required for the facilitation of the NRC’s Force-on-Force (FOF) inspection activities. The Contractor will be required to provide logistical support and expertise in Engagement Simulation Systems (ESS)/Multiple Integrated Laser Engagement Systems (MILES) equipment and weaponry required to conduct approximately 20 to 25 inspections (i.e., 40 to 50 FOF exercises) per year, in accordance with NRC’s site schedule. The scope of the proposed support shall include logistical, maintenance, and on-site support for NRC-evaluated FOF exercises at approximately 57 NRC-licensed facilities that are on a triennial FOF inspection cycle. Each NRC FOF inspection may include multiple exercises. Services will be performed remotely to the NRC located in Rockville, Maryland. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 541614, Logistics Management Consulting Services. The purpose of this announcement is to provide potential sources the opportunity to submit information regarding their capabilities to perform work for the NRC in accordance with the requirements outlined below. All interested parties, including all categories of small businesses (small businesses, small, disadvantaged businesses, 8(a) firms, women-owned small businesses, service-disabled veteran-owned small businesses, and HUBZone small businesses) are invited to submit a response. The capabilities package submitted by a vendor should demonstrate the firm’s ability, capability, and responsibility to perform the principal components of work listed below. The response should also include past performance/experience regarding projects of similar scope by listing the project title, general description, period of performance, the dollar value of the contract, and name of the company, agency, or government entity for which the work was performed. THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does NOT constitute a request for proposal. Submission of any information in response to this market survey is purely voluntary. The Government assumes no financial responsibility for any costs incurred. BACKGROUND: This project supports Title 10 of the Code of Federal Regulations Part 73, which requires the NRC’s evaluation of its licensees’ ability to provide assurance that they can protect against the threat of radiological sabotage. As part of the effort to improve FOF testing at NRC-licensed facilities, the NRC has taken steps to enhance the realism of engagements between the nuclear facility’s security forces and postulated mock adversary forces during FOF exercises. For efficiency and flexibility in this effort, the NRC requires use of ESS and MILES equipment and weaponry. The Department of Energy’s (DOE) Office of Enterprise Assessment contractor has been supporting the NRC in these FOF exercises since October 1, 2012 under an Interagency Agreement. However, DOE’s contract will expiring in February, 2027, therefore, the NRC needs to find an alternative vendor who is capable of providing these services with very little or no ramp-up time. CAPABILITIES REQUIRED: The NRC is seeking to identify commercial organizations capable of providing the required logistical support to enable the NRC licensees to become familiar with the ESS/MILES equipment being used in the FOF exercises, provide instruction on how to mount licensee-provided equipment to the ESS weapons to reflect the licensee’s profile (i.e., sighting systems, slings, etc.), provide the necessary ESS/MILES equipment support during each NRC-evaluated FOF exercise, and conduct maintenance and cleaning of the equipment and weapons on an as needed basis. Personnel working on this contract shall meet the minimum requirements for experience as follows: Labor Categories Required and Position Minimum Requirements ESS Support Manager/Senior ESS Specialist III* (One Full-time) - Current Armorer certification and ten-year minimum experience in management in order to manage the operation and liaison with the NRC in addition to ten-year minimum experience in operating and maintaining ESS/MILES equipment and weapons ESS Armorer Technician III* (Two Full-time) - Current Armorer certification with five-year minimum experience in operating and maintaining ESS/MILES equipment and weapons ESS Armorer Technician II* (2 Full-Time) - Current Armorer certifications with three-year minimum experience in operating and maintaining ESS/MILES equipment and weapons ESS Armorer Technician I* (3 Full-Time) - Current Armorer certifications with one-year minimum experience in operating and maintaining ESS/MILES equipment and weapons Administrative Support Specialist I - (One Full-Time) One-year minimum experience in office administration *NOTE: These positions may require security clearances. The clearance level depends on the type of access to classified information and the secure facilities that will be needed to perform the work. SCOPE OF WORK: The NRC anticipates that the Statement of Work (SOW) will include the following tasks and deliverables: Task 1 - Perform Warehouse Property Inventory Check The Contractor shall lease a warehouse for the storage of ESS/MILES equipment and three Logistical Support Trailers (LST) and three pick-up trucks. NRC will provide the Contractor a hard copy list of NRC equipment currently being stored in the warehouse. The Contractor shall coordinate with the Contracting Officer’s Representative (COR) for updating the inventory of each equipment in the warehouse each year. During the length of this contract, the Contractor shall tag and track the warehouse equipment and shall notify the COR in writing if there is a discrepancy in the inventory, such as an item being missing or damaged. The Contractor shall work with the COR in maintaining an accurate list of property inventory. Task 2 - Provide Recommendations for Purchase of ESS/MILES Equipment and Weapons Per COR request, the Contractor shall conduct market research and provide recommendations for the purchase of replacement ESS/MILES equipment and weapons. These recommendations shall consider getting quotes from multiple sources, and reviewing the FAR’s list of mandatory sources, the GSA Schedule, and excess from other agencies. Following market research, the Contractor shall provide recommendations to the COR in writing with the item specifications, pricing, method of market research, and how the equipment and weapons would benefit the NRC. Task 3 - Transport and Operate On-Site Logistical Support Trailers The Contractor shall transport and operate on-site Logistical Support Trailers (LSTs) for the maintenance, storage, and issuance of ESS/MILES equipment and weapons approximately twice monthly. The Contractor shall support the NRC FOF exercises with qualified personnel and the use of three LSTs. The LSTs are configured to provide secure storage and transportation of the ESS/MILES equipment and weapons. Additionally, the LSTs shall serve as a point of issuance and return of exercise equipment. The Contractor shall retain sufficient spare equipment in reserve to ensure sufficient equipment is available. The Contractor shall maintain a lease for three trucks suitable for transport of the LSTs. The Contractor shall maintain service agreements and ensure scheduled preventative maintenance and timely repair of the assigned LSTs and trucks. The trailers and trucks shall be replaced or refurbished on a five-year depreciation schedule, as directed by the COR. Task 4 - Set up Logistics and Exercises 1. Coordinate Logistics for Exercises As part of planning and preparation, the Contractor shall coordinate with NRC staff, licensee staff, and the mock adversary force lead (when applicable) regarding scheduling exercises, logistics, special needs (e.g., power supply or parking for trailer), and contingencies for en route emergencies, where applicable. The Contractor shall ensure all logistical support for the NRC FOF exercises are accomplished (i.e., ammunition, weapons, administrative supplies, etc. are ordered and shipped to training sites). Weapons and equipment shall be appropriately tested (to ensure functionality), maintained, and prepared for transport. Provide On-Site Support 1. Provide Set-up/Familiarization/CAF Support The Contractor shall perform the following: 1) provide set-up and configuration of trailer; 2) provide ESS/MILES Safety Briefing and familiarity training presentations, to be presented either in-person by the Contractor or used in computer-based training (CBT), as appropriate, to NRC-licensee/utility security force and mock adversary force personnel, which shall include information such as safety features of ESS/MILES; 3) assist licensee personnel with any requested modifications to weapons (e.g., mounting preferred optics) and assist with ensuring each individual’s weapon is properly sighted, according to site procedures); 4) perform inspections of MILES harnesses and weapons and associated MILES equipment prior to each FOF exercise; and 5) provide MILES and/or specially designated adversary gear to the mock adversary force, as well as support, as requested by the mock adversary director or NRC inspection team leader. 2. Provide FOF Exercise Support Typically, two NRC-evaluated FOF exercises take place (i.e., on Tuesdays and Wednesdays). The Contractor shall: 1) ensure that an ESS/MILES Safety Briefing was conducted via in-person by The Contractor or by licensee CBT to all exercise participants prior to conducting each exercise. The briefing shall describe and present information such as the safe and seamless integration of MILES equipment into existing procedures and protocols for conducting FOF exercises; 2) provide for issuance and retrieval of ESS/MILES weapons and equipment; and 3) provide on-site support for NRC inspection staff and licensee controllers in addressing any issues with functionality of weapons and equipment. The Contractor shall coordinate with a Saab Technician on any Saab equipment-related issues and repairs, and on download of exercise data upon conclusion of each exercise. 3. Coordinate with Saab Technician The Contractor shall coordinate with the Saab Technician on ESS/MILES equipment and weapons inspections, preventative maintenance, and repair (as necessary). The Saab Technician shall support the FOF exercises by preparing MILES equipment for exercise activity and by producing a post-exercise MILES Activity Report (MAR). Upon completion of each exercise, a MAR shall be compiled by the Saab Technician from all MILES equipment used during each exercise. EA shall ensure that the Saab Technician submits the MAR to the NRC inspection team following the completion of each exercise. The Saab Technician’s responsibility shall ensure all MILES equipment is operational. The Contractor shall assign an expert MILES/ESS technician who shall provide a continuing interface with Saab on technical aspects of Saab support and expertise with Saab equipment operability. Task 5 - Perform Quality Check of Government Property Post Exercise Upon conclusion of the final exercise, the Contractor shall account for all NRC property and prepare the trailer for transport back to home location (or in some instances, directly to another licensee site). Task 6 - Conduct Post-Exercise Activity Upon arrival at home location, the Contractor shall: 1) unload equipment; 2) clean, inspect and arrange for repair of equipment, as necessary; 3) arrange for scheduled maintenance of trailer and truck; and 4) conduct weapon inspection and cleaning. Task 7 - Prepare and Submit an After-Action Report The Contractor shall prepare an After-Action Report (AAR) describing the results of each site visit to the COR. The AAR shall address the planning and execution of each visit, expert consultation provided in each exercise, and a compilation of the daily reporting activity highlights. Task 8 - Support Adversary Selection and Training and TTC Training 1. Support Selection and Requalification Training of Mock Adversary Forces The Contractor shall issue equipment and weapons to selectees and/or members during selection and training events of mock adversary forces, as directed by the COR. Armorers shall provide support during the selection and training events, to include Safety Briefings to mock adversary force selectees and members, to ensure safe operation of ESS/MILES. Upon completion of training, the Contractor shall collect and safeguard the ESS/MILES gear. 2. Support TTC Weapons Course The COR will contact the Contractor when the TTC has ample participation in its Weapons Course which is conducted in Chattanooga, TN. The Contractor shall provide one armorer, as well as provisional ESS/MILES equipment and weapons, corresponding to the number of classroom participants. The Contractor shall coordinate logistics of participation and support of the TTC training with the Weapons Course Coordinator. GOVERNMENT-FURNISHED PROPERTY (GFP) Government-furnished property used for supporting the NRC will be maintained at the Contractor’s warehouse facility. The property will be controlled and accounted for by The Contractor and NRC as required in the FAR. Acquisition and disposition of equipment will be conducted by The Contractor through coordination with the NRC COR. The NRC has purchased three trailers for the Contractor to transport and operate as Logistical Support Trailers (LSTs) for the maintenance, storage and issuance of ESS/MILES equipment and weapons at the specified NRC facilities, approximately one to three trips per month, as determined by the NRC schedule. The Contractor shall retain trailers at the Contractor’s Warehouse Facility. The Contractor will ensure scheduled preventative maintenance and timely repair of the LSTs. The Contractor will also provide a schedule for replacement or refurbishment of the LSTs based on a five-year depreciation, as directed by the COR. HOW TO RESPOND TO THIS SOURCES SOUGHT NOTICE If your organization has the capability and capacity to perform, as a prime contractor, all of the services described in this notice, then please respond to this notice and provide written responses to specifically address the requirements stated above in addition to the following questions. Please do not include any proprietary or otherwise confidential information in the response, and do NOT submit a proposal. Proposals submitted in response to this notice will NOT be considered. Organizations responding to this market research survey should keep in mind that only focused and pertinent information is requested. If significant subcontracting or a teaming arrangement is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements. Submission of additional materials such as glossy brochures or videos will not be accepted and is discouraged. ADDITIONAL MARKET RESEARCH QUESTIONS Organization name, address, email address, Web site address, telephone number, and Unique Entity Identifier (UEI). What size is your organization with respect to NAICS code identified in this notice (i.e., "small" or "other than small")? If your organization is a small business under the aforementioned NAICS code, what type of small business (i.e., small disadvantaged business, woman-owned small business, economically disadvantaged woman-owned small business, veteran-owned small business, service-disabled veteran-owned small business, 8(a), or HUBZone small business), and confirm that you would be able to comply with FAR 52.219-14 Limitations on Subcontracting? Specify all that apply. Separately and distinctly describe which of the required capabilities listed above that your organization possesses and indicate your organization's role (prime contractor, first tier subcontractor, and/or supplier) in related contracts. Please also provide the contract number, contract type, customer name, address and point of contact phone number and email address, contract value, thorough description of supplies and services included in the scope of that contract, indication of how they are similar to the required capabilities described in this notice, period of performance (for services) or delivery date (for products), and any other relevant information. Indicate whether your organization offers any of the required capabilities described in this notice on one or more of your company's own Federal Government contract vehicles (i.e., GSA Federal Supply Schedule contracts or Government-wide Acquisition Contracts) that the NRC could order from and, if so, which services are offered. Also, provide the contract number(s) and indicate what is currently available for ordering from each of those contract(s). Provide a standard, non-proprietary commercial price list or similar standard non-proprietary commercial pricing information for how your company sells, as a prime contractor, required capabilities described in this notice that your organization has experience providing. Also, indicate what is included in that pricing. Interested organizations responding to this Sources Sought Synopsis are encouraged to structure capability statements in the order of the areas of consideration noted above. All capability statements sent in response to this notice must be submitted electronically, via e-mail, to Carolyn.cooper@nrc.gov, either MS Word or Adobe Portable Document Format (PDF), within 15 calendar days from the date of publication of this notice. The subject line of the transmittal email must reference the notice ID number APP-27-CNRI-0001. DISCLAIMER AND NOTES: Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s potential capability and capacity to perform the subject work. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. After a review of the responses received, a pre-solicitation synopsis and solicitation may be published in SAM.gov. However, responses to this notice will not be considered adequate responses to a solicitation. | - | Market Research | 11/02/2026 |
This Presolicitation notice is NOT a Request for Quotation (RFQ)/Solicitation, however all responsible sources may submit a capability statement, quotation, bid, or proposal, as appropriate, which will be considered by the agency. The Government intends to award a purchase order to Information Management Services on a sole source basis under the authority of RFO FAR 12.102(a) - Restricting competition. Responses shall be submitted electronically to Jacob Balenson via email to jacob.balenson@nih.gov, and Sandra Daniels sandra.daniels@nih.gov no later than November 25, 2026 at 10:00 AM (Eastern Time). Emails must reference Presolicitation Number 75N98027Q00046 in the subject line. See attached Presolicitation Notice and Statement of Work (SOW) for more information. | - | Pre-Solicitation | 11/25/2026 |
Amendment #1 The purpose of this amendment is to upload response to vendor questions, upload a revised Specifications, and to extend the closing time of the solicitation from NOON EST to 5PM EST. Note: the closing date remains the same: Friday, November 13, 2026. Quote must be submitted via email to david.tibbs@usda.gov by the prescribed closing date and time. Attachments may be in PDF, Word, or Excel formats. --------------------Break-------------------- This is a combined synopsis/solicitation notice for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number #124PSA27Q0006 is issued as a Request for Quotation (RFQ) for Soybean Oil in support of the U.S. Meat Animal Research Center (USMARC). This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 311224 – Soybean and Other Oilseed Processing. The small business size standard is 1250 employees. Statement of Requirement Scientists at the Roman L. Hurska U.S. Meat Animal Research Center (USMARC) are developing scientific information and new technologies to solve high-priority problems for the U.S. beef, swine, and sheep industries. As part of the effort animals need to be adequately cared for and fed. USMARC requires 12 tons (TN) of soybean oil as a feed additive. See description in CLIN #0001 below. Schedule of Items CLIN Description 0001 Soybean Oil - Crude Degummed with a minimum of 99.0% fat. Price inclusive of delivery. Quantity Unit of Issue Unit Cost Total 12 TN (ton) $ $ Federal Acquisition Regulation (FAR) and United States Department of Agriculture Acquisition Regulation (AGAR) Clauses and Provisions The clauses and provisions contained herein are applicable to any order awarded as a result of this solicitation. The terms and conditions set forth herein supersede all other terms and conditions. Acceptance of the order in accordance with (IAW) FAR 12.201-1(b)(2) constitutes acceptance of all terms and conditions contained herein. As part of the Revolutionary FAR Overhaul (RFO), system updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in this solicitation. Contracting officers will rely on representations from offers based on provisions in the solicitation. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM. 52.252-2 Clauses Incorporated by Reference Feb 1998 This solicitation incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also the full text of the clause may be accessed electronically at Internet address https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52 52.212-4 Terms and Conditions—Commercial Products and Commercial Services (Nov 2025) ☐ Alternate I (Nov 2025) of 52.212-4 52.203-17 Contractor Employee Whistleblower Rights (Nov 2023) 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) 52.222-50 Combating Trafficking in Persons (Nov 2025) ☐ Alternate I (Nov 2025) of 52.222-50 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) 52.232-39 Unenforceability of Unauthorized Obligations (Jun 2013) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) 52.233-3 Protest After Award (Sep 2025) 52.233-4 Applicable Law for Breach of Contract Claim (Sep 2025) 52.240-91 Security Prohibitions and Exclusions (Nov 2025) ☐ Alternate I (Nov 2025) of 52.240-91 52.244-6 Subcontracts for Commercial Products and Commercial Services (Nov 2025) The following clauses are applicable if checked: ☐ 52.203-6 Restrictions on Subcontractor Sales to the Government (Jun 2020) with Alternate I (Nov 2021) of 52.203-6 ☐ 52.203-13 Contractor Code of Business Ethics and Conduct (Nov 2021) ☐ 52.204-9 Personal Identity Verification of Contractor Personnel Jan 2011 ☒ 52.204-13 System for Award Management—Maintenance (Nov 2025) ☐ 52.204-91 Contractor identification (Nov 2025) ☐ 52.209-6 Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Sep 2025) ☐ 52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters (Sep 2025) ☒ 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (Sep 2025) ☐ 52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Nov 2025) ☒ 52.219-6 Notice of Total Small Business Aside (Nov 2025) ☐ Alternate I (Mar 2020). ☐ 52.219-8 Utilization of Small Business Concerns (Nov 2025) ☐ 52.219-9 Small Business Subcontracting Plan (Nov 2025) ☐ Alternate III (Nov 2025) of 52.219-9. ☐ Alternate IV (Nov 2025) of 52.219-9 ☐ 52.219-14 Limitations on Subcontracting (Nov 2025) ☐ 52.219-16 Liquidated Damages—Subcontracting Plan (Nov 2025) ☐ 52.219-33 Nonmanufacturer Rule (Nov 2025) ☒ 52.222-3 Convict Labor (June 2003) ☒ 52.222-19 Child Labor—Cooperation with Authorities and Remedies (Nov 2025) ☐ 52.222-35 Equal Opportunity for Veterans (Nov 2025) ☐ Alternate I (Jul 2014) of 52.222-35 ☒ 52.222-36 Equal Opportunity for Workers with Disabilities (Nov 2025) ☐ Alternate I (Jul 2014) of 52.222-36 ☐ 52.222-37 Employment Reports on Veterans (Nov 2025) ☐ 52.222-40 Notification of Employee Rights Under the National Labor Relations Act (Dec 2010 ☐ 52.222-41 Service Contract Labor Standards (Aug 2018) ☐ 52.222-42 Statement of Equivalent Rates for Federal Hires (May 2014) ☐ 52.222-43 Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) ☐ 52.222-44 Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (May 2014) ☐ 52.222-51 Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) ☐ 52.222-53 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (Nov 2025) ☐ 52.222-54 Employment Eligibility Verification (Nov 2025) ☐ 52.222-62 Paid Sick Leave Under Executive Order 13706 (Jan 2022) ☒ 52.222-90 Addressing DEI Discrimination by Federal Contractors (Apr 2026) ☐ 52.223-2 Reporting of Biobased Products Under Service and Construction Contracts (Nov 2025) ☐ 52.223-9 Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ☐ Alternate I (May 2008) of 52.223-9 ☐ 52.223-11 Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Nov 2025) ☐ 52.223-12 Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Nov 2025) ☐ 52.223-23 Sustainable Products and Services (Nov 2025) ☐ 52.224-3 Privacy Training (Jan 2017) ☐ Alternate I (Jan 2017) of 52.224-3 ☒ 52.225-1 Buy American-Supplies (Nov 2025) ☐ Alternate I (Oct 2022) of 52.225-1 ☐ 52.225-3 Buy American--Free Trade Agreements--Israeli Trade Act (Nov 2025) ☐ Alternate II (Nov 2025) of 52.225-3. ☐ Alternate III (Nov 2025) of 52.225-3. ☐ Alternate IV (Oct 2022) of 52.225-3 ☐ 52.225-5 Trade Agreements (Nov 2023) ☐ 52.225-19 Contractor Personnel in a Designated Operational Area or Supporting a Diplomatic or Consular Mission outside the United States (May 2020) ☐ 52.225-26 Contractors Performing Private Security Functions Outside the United States (Oct 2016) ☐ 52.226-4 Notice of Disaster or Emergency Area Set-Aside (Nov 2007) ☐ 52.226-5 Restrictions on Subcontracting Outside Disaster or Emergency Area (Aug 2025) ☐ 52.229-12 Tax on Certain Foreign Procurements ☐ 52.232-29 Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) ☐ 52.232-30 Installment Payments for Commercial Products and Commercial Services (Nov 2021) ☒ 52.232-33 Payment by Electronic Funds Transfer— System for Award Management (Oct 2018) ☐ 52.232-34 Payment by Electronic Funds Transfer—Other Than System for Award Management (Jul 2013) ☐ 52.232-36 Payment by Third Party (Nov 2025) ☐ 52.237-2 Protection of Government Buildings, Equipment, and Vegetation (Apr 1984) ☐ 52.237-3 Continuity of Services (Jan 1991) ☐ 52.240-92 Security Requirements (Nov 2025) ☐ 52.240-93 Basic Safeguarding of Covered Contractor Information Systems (No 2025) ☐ 52.247-64 Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2025) ☐ Alternate I (Apr 2023) of 52.247-64. ☐ Alternate II (Nov 2021) of 52.247-64 AGAR Clauses This solicitation incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of the clause may be accessed electronically at Internet address https://www.usda.gov/guidance-documents/acquisition-policy/ocp/usda-agar30-sept-26pdf. AGAR 452.203-70 Unenforceable Supplier Terms (MAY 2026) AGAR 452.204–70 Modification for Contract Closeout (Apr 2026) AGAR 452.232-72 Electronic Submission of Payment Requests (Sep 2026) Invoices To invoice, a vendor must first enroll in the Invoice Processing Platform (IPP) by visiting https://www.ipp.gov/vendors/enrollment. Once enrolled, all invoices must be submitted electronically through IPP. The IPP is a government-wide secure web-based payment information service offered free of charge to government agencies and their suppliers by the U.S. Department of Treasury’s Financial Management Service (FMS). Effective May 6, 2013, payment requests must be submitted electronically through the U.S. Department of the Treasury’s Invoice Processing Platform (IPP). “Payment Request” means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions—Commercial Items included in commercial item contracts. The Contractor must use the IPP website to register, access and use IPP for submitting requests for payment. Contractor assistance with enrollment, UserIDs and Passwords can be obtained by contacting the IPP Helpdesk via email at IPP Customer Support Desk at 1-866-973-3131. In accordance with the requirements of the Debt Collection Improvement Act of 1996, all payments under this order will be made by electronic funds transfer (EFT). The Contractor shall provide financial institution information to the Finance Office designated above in accordance with FAR 52.232-33 Payment by Electronic Funds Transfer - System for Award Management.” Solicitation Information Award Type It is anticipated that a Firm-Fixed-Price Purchase Order will be awarded as a result of this synopsis/solicitation. The Government intends to make one award from this solicitation. Therefore, to be considered responsive, contractors must submit pricing for all items. Evaluation and Basis for Award The provision at FAR 52.212-2, Evaluation—Commercial Products and Commercial Services is not applicable to this solicitation. In lieu of this provision, quotes will be evaluated in accordance with FAR 12.203 based on the criteria listed below. An award will be made to the quoter representing the best value to the Government. Price – The quoter shall provide pricing as requested in the solicitation description section under the Schedule of Items header. Any quantity price discounts and discounts for prompt payment should be included in this section. Failure to propose pricing for each individual contract line items (CLINs) may result in a quotation being excluded from further consideration. The offeror’s quotation will be evaluated in accordance with FAR 12.204, to determine if it is fair and reasonable. Technical Acceptability – Technical Acceptability will be evaluated to receive an overall rating of "acceptable" or "unacceptable." It is the contractor's responsibility to ensure their quotation clearly demonstrates their capability to meet these requirements. Technical Acceptability is defined as: 1) Quote must meet or exceed all technical requirements as defined in the solicitation. 2) Vendor must be registered in SAM.gov and have an active UEI SAM registration at the time of quote submittal. 3) No active exclusions as found in the System for Award Management (SAM.gov.) 4) “Acceptable” or “neutral” past performance rating. Past Performance – The Government may utilize any references provided by the Contractor, along with information available from past contracts/orders with the USDA and any information found using sources such as Federal Government sources or the Contractor Performance Assessment Reporting System (CPARS) to determine if the Contractor has acceptable or neutral Past Performance. Past Performance will be evaluated using the following rating system: Acceptable: The contractor shows a demonstrated ability to meet contract requirements in prior or current contracts, including quality of work, timeliness, cost control, business relations, and adherence to contract terms. Neutral: Offeror does not have a past performance record. Unacceptable: The contractor has a documented history of failing to meet contract requirements, including poor quality, missed deadlines, cost overruns, lack of responsiveness, or unethical behavior. Evaluation Method The Government will evaluate quotations based on the lowest price technically acceptable criteria. Only the lowest priced offer will be evaluated for Technical Acceptability. Should the lowest priced offer not receive an acceptable technical or past performance rating, the process will continue in order of lowest priced offer until the lowest price, technically acceptable offer with acceptable or neutral past performance is identified. Delivery Information F.o.b. destination, is requested as the F.O.B. point for all deliverables. The USDA requires delivery of all items by date agreed upon at time of award. Early deliveries will be accepted. Shipping Instructions: Items shall be shipped to the following address: United States Department of Agriculture (USDA) U.S. Meat Animal Research Center (USMARC) 844 Road 313 Clay Center, NE 68933 52.252-1 Solicitation Provisions Incorporated by Reference Feb 1998 This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52 52.212-1 Instructions to Offerors - Commercial Products and Commercial Services (Nov 2025) FAR 52.212-1 is amended as follows: Period for acceptance of offers. The Offeror agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers. 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation (Jan 2017) 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations - Representation (Sep 2025) 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (Sep 2025) 52.240-90 Security Prohibitions and Exclusions Representations and Certifications (Nov 2025) The following provisions are applicable if checked: ☐ 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions (Sep 2024) ☒ 52.204-7 System for Award Management—Registration (Nov 2025) ☐ Alternate I (Nov 2025) to 52.204-7 ☐ 52.204-90 Offeror Identification (Nov 2025) ☐ 52.207-6 Solicitation of Offers from Small Business Concerns and Small Business Teaming Arrangements or Joint Ventures (Multiple-Award Contracts) (Aug 2024) ☐ 52.209-12 Certification Regarding Tax Matters (Oct 2025) ☐ 52.219-2 Equal Low Bids (Nov 2025) ☐ 52.222-18 Certification Regarding Knowledge of Child Labor for Listed End Products (Feb 2021) ☐ 52.222-48 Exemption from Application of the Service Contract Labor Standards for Maintenance, Calibration, or Repair of Certain Equipment–Certification (Nov 2025) ☐ 52.222-52 Exemption from Application of the Service Contract Labor Standards for Certain Services-Certification (Nov 2025) ☐ 52.222-56 Certification Regarding Trafficking in Persons Compliance Plan (Oct 2020) ☐ 52.223-4 Recovered Material Certification (May 2008) ☒ 52.225-2 Buy American Certificate (Oct 2022) ☐ 52.225-4 Buy American-Free Trade Agreements-Israeli Trade Act Certificate (Nov 2025) ☐ 52.225-6 Trade Agreements-Certificate (Feb 2021) ☐ 52.226-3 Disaster or Emergency Area Representation (Nov 2007) ☐ 52.229-11 Tax on Certain Foreign Procurements—Notice and Representation (Jul 2025) NOTICE FOR FILING AGENCY PROTESTS United States Department of Agriculture (USDA) Protest Procedures The United States Department of Agriculture (USDA) is committed to fair, transparent, and efficient acquisitions. Interested parties with concerns about this solicitation are encouraged to seek resolution through the following USDA procedures. Tier 1: Contracting Officer Concern Resolution Submission: Interested parties with concerns about either the solicitation or subsequent award should first submit their concern directly to the Contracting Officer, providing sufficient detail to allow the Contracting Officer to understand and assess the issue. Process: The Contracting Officer will review the concern, seek clarification as needed, and engage with the interested party to attempt prompt resolution. Review Timeline: The Contracting Officer will make every effort to provide a response or resolution within 10 business days of receiving the concern. Effect on Award or Performance: Tier 1 engagement is not considered an official notification of filing an agency protest and does not pause solicitation deadlines, delay award decisions, or suspend contract performance. Next Steps: If the matter cannot be resolved at Tier 1, the interested party may file a written agency protest under Tier 2. USDA encourages all parties to seek resolution with the Contracting Officer before filing an agency protest. Tier 2: Agency Protest If concerns cannot be resolved at Tier 1, an interested party may file a written agency protest with either the Contracting Officer or the USDA Independent Review Authority. The decision by the USDA Independent Review Authority is an alternative to a decision by the Contracting Officer. The USDA Independent Review Authority will not consider an appeal of the Contracting Officer’s decision on an agency protest. The protest must state whether the protester elects review by the Contracting Officer, by the UDSA Independent Review Authority. If no election is stated, the Contracting Officer will decide the protest. Required Information: Protests shall include the information set forth in FAR 33.104-4 (a)(3). Failure to submit the required information may result in a delay or dismissal of the protest. Submission: Agency protests should be submitted electronically to SPE.inquiry@usda.gov and the Contracting Officer. Timeliness: Protests must be filed within the timeframes specified in FAR 33.104. Effect on Award or Performance: Contract awards or performance will be suspended during the protest period unless justified in writing for urgent and compelling reasons or determined to be in the best interest of the Government. Review Timeline: USDA strives to resolve agency-level protests within 35 business days of receipt. Election of Forum: By filing a protest with USDA, the protesters agree not to file a protest on the same matter with the Government Accountability Office (GAO) or any other external forum while the agency protest is pending. If such a protest is filed externally, the USDA agency protest will be dismissed. Questions: Questions regarding this notice or protest procedures should be directed to the Contracting Officer identified in this solicitation. | - | Combined Synopsis | 11/13/2026 |
Synopsis: This is a Small Business Sources Sought notice. This is NOT a solicitation for proposals, proposal abstracts, or quotations. The purpose of this notice is to obtain information regarding: (1) the availability and capability of qualified small business sources to perform a potential requirement; (2) whether they are small businesses; 8(a) small businesses, service-disabled veteran-owned small businesses; veteran-owned small businesses; women-owned small businesses; HUBZone small businesses; or small disadvantaged businesses; and (3) their size classification relative to the North American Industry Classification system (NAICS) code for the potential acquisition. Your responses to the information requested will assist the government in determining the appropriate acquisition method, including whether a small business set aside is possible. An organization that is not considered a small business under the applicable NAICS code should not submit a response to this notice. The requirement is assigned a code of 541715 in the North American Industry Classification System (NAICS), and the small business size standard for such requirements is 1,000 employees or less. This notice is issued for market research purposes to assess potential small business sources, industry practices, and the availability of commercial services. The Government has not made a final determination regarding acquisition strategy, contract type, commerciality, or small business set-aside status. Respondents should identify whether they can perform the requirement as a prime contractor, including through existing teaming arrangements or qualified subcontractors, and distinguish their own capabilities from those of proposed team members. Background: The National Institute on Minority Health and Health Disparities (NIMHD) conducts and supports research and training programs to advance knowledge and understanding of health disparities, identify mechanisms to improve minority health and reduce health disparities, and develop effective interventions in community and clinical settings. NIMHD is the lead organization at the National Institutes of Health (NIH) for planning, reviewing, coordinating, and evaluating minority health and health disparities research activities. NIMHD also promotes workforce development, supports research capacity at less-resourced institutions that train students in research careers, serves populations experiencing health disparities, supports participation in clinical research, and promotes information dissemination through regular communications, public education outreach, and scientific presentations. The President’s Executive Order (EO) 14212 Establishing the President’s Make America Healthy Again Commission aims to improve the health of Americans. As described in the EO, escalating burden of chronic diseases poses significant challenges in the United States. These conditions contribute to rising health costs, reduced workforce productivity, and stagnant life expectancies across the country, both in adults and children. NIH defines a health disparity as a measurable difference in health that exists between specific population groups. This is a rigorously derived and data-driven determination operationalized by quantifiable metrics, rather than a statement of attribution. It is a scientific starting point that identifies where health outcomes diverge, not a predetermined conclusion about why. Scientific investigations to identify or understand the root causes are separate and distinct scientific questions, which are necessarily multifaceted and complex. NIH funded research is interested in those health disparities that are modifiable or actionable to improve the health of all population groups. Health disparities may be observed in the risks, prevalence, or problems resulting from specific behaviors, as well as the incidence, prevalence, and mortality from conditions, diseases, and/or disorders. To fulfill the NIH mission of seeking fundamental knowledge about the nature and behaviors of individuals as living systems, and the statutory purpose of NIMHD, to conduct research to understand and reduce health disparities, NIMHD Division of Intramural Research (DIR) conducts population health research to understand how health outcomes vary across populations, identify multilevel modifiable factors that drive these disparities, and develop, test, and evaluate clinical and population-based interventions to reduce these disparities. NIMHD DIR requires contractor assistance to provide R&D social and behavioral sciences research services to support NIMHD DIR in conducting population health and clinical research to understand and reduce health disparities in the United States. The Government anticipates that individual task orders may involve differing research designs, study populations, sites, durations, and levels of complexity. Interested firms should explain their ability to mobilize qualified personnel and research resources for multiple concurrent studies as requirements arise. NIMHD is seeking small businesses capable of designing, conducting and overseeing the clinical, scientific, and technical aspects of investigations into health disparities across populations, to identify modifiable risk and protective factors associated with these disparities, and develop and test interventions to reduce these disparities. Study designs to be used may include, but are not limited to: Population-based cross-sectional surveys; Epidemiological studies (e.g., longitudinal cohort study, case-control studies); Clinical trials; Community-based intervention studies; Simulation modeling; and Qualitative research methods (e.g., direct observations, in-depth interviews, focus groups discussions). Independently and not as an agent of the Government, the Contractor shall furnish all necessary services, qualified personnel, material, equipment, and facilities not otherwise provided by the Government to successfully perform the requirements stated below. Specifically, the Contractor shall, as required by individual task orders, perform the following technical requirements summarized below that also are included in the attached Draft Statement of Work (SOW), including but not limited to: Provide personnel, facilities, and other services necessary to maintain and coordinate multiple health disparities research studies funded through task orders under this Indefinite Delivery, Indefinite Quantity (IDIQ) contract. Provide overall project management and coordination of activities performed under individual task orders, including development and maintenance of project plans, schedules, milestones, coordination of participating research sites and subcontractors, monitoring of performance, identification and resolution of project risks and issues, and preparation of progress reports as specified in the applicable task order. Conduct research studies through qualified organizations, as specified in individual task orders, and receiving consent from the Contracting Officer’s Representative (COR) and Contracting Officer (CO). This includes (but is not limited to) implementation of protocols; population health and clinical research site monitoring; regulatory compliance assurance; and analyses of data from clinical, laboratory, population and epidemiologic studies. Provide and manage participating population health research and clinical trial sites, investigators, laboratories, and other research resources necessary to conduct studies, directly or through qualified subcontractors. The Contractor shall draft, negotiate, execute, administer, monitor, renew and/or modify as necessary, subject to subcontractor's satisfactory past performance, and with the consent of the CO, subcontracts with domestic population health studies, clinical research sites and laboratories, and provide support for these population health studies, clinical research site and laboratories. The Contractor shall assume responsibility for population health and clinical sites, including site readiness to start new research studies. This includes the establishment of new subcontract agreements for these sites (including laboratories), data management, and other operations and functions. As existing protocols close, the Contractor shall assume responsibility for any new protocols at these sites. Recruit and retain numbers of potential research subjects sufficient for the timely completion of all protocols. Provide United States based investigators in the United States with expertise in the population health and clinical care, to conduct protocols specified through individual task orders. Provide professional and technical staff adequate to provide scientific and administrative coordination of multiple population health and clinical health disparities research studies. These staff shall include, but are not limited to, qualified medical, nursing, and neuropsychologic staff, study coordinators, personnel for participant identification, recruitment, study conduct, and retention, pharmacists, and laboratory technicians. Ensure sites have access to populations of interest, laboratory facilities with the capability to perform clinical research specified in task orders. Identify and engage community organizations, community leaders, health care providers, and other relevant stakeholders; establish and support community advisory boards, community coalitions, or other partnerships; conduct community needs and readiness assessments; and facilitate community participation in research planning, implementation, and dissemination of findings. Develop and implement quantitative and qualitative data collection methods, including surveys, interviews, focus groups, direct observations, and other methods appropriate to the research protocol. The Contractor shall manage, analyze, and report data collected through these methods, as required by individual task orders. Provide facilities and equipment adequate to conduct population health, inpatient and outpatient clinical research studies. Equipment purchases must be approved by the COR and CO. Ensure that sites have (through lease or direct provision, if required) electronic information systems compliant with the Federal Information Security Modernization Act (FISMA), necessary specialized equipment (including hardware and software) for sites to electronically communicate with the Contractor, subcontractors, and NIMHD DIR as required, for processing and storage of biospecimens (e.g., ultralow temperature freezer, specialized shipping materials and training for shipment of biohazardous materials and dangerous goods, and for receipt, storage, monitoring, and dispensing of investigational drugs). Obtain access for research protocol review and approval (or exemption) to a standing Institutional Review Board (IRB) and ensure that each institution conducting population health and clinical research studies has a current, approved Federal-Wide Assurance Number on file with the Office for Human Research Protections (OHRP). Ensure that all the staff at each site participating in the design or conduct of population health and clinical research involving human subjects, complete and maintain education on the human research protections. Ensure that when appropriate, population health and clinical research sites have a community advisory board (CAB) constituted with members of the local community that can provide community perspective and advice for science in the community where the population health and clinical research is located and that provides community input. The Contractor shall provide services to ensure regulatory compliance for research activities including subcontracted sites' performance. More specifically: Ensure site access to a communications system in compliance with U.S. Food and Drug Administration (FDA) requirements for the submission of Adverse Experience Reports (AERs) by Subcontractors to the Contractor for transmission as required to the COR as required. Monitor the accuracy of adverse experience reporting through regular summary reports for submission to the COR. Draft safety reports as required by the FDA for selected studies for COR Submission. Develop, implement, and monitor plans for acquisition, distribution, dispensing, handling, administration, and accountability of study interventions (pharmaceutical and non-pharmaceutical), in compliance with applicable Federal, state, and local regulations. Provide site monitoring for quality assurance of research conducted at all clinical and laboratory sites, as designated by the COR. Monitoring schedules shall be approved by and results reported to the COR with a copy to the CO and shall include assurance of compliance with FDA record keeping and reporting requirements (21 CFR 50 and 56; 21 CFR 312.50, Subpart D), accuracy and completeness of case report forms, source documentation, and other research records, and periodic record auditing and documentation by the staff of the subcontracted centers. Each site shall be visited a minimum of 2-3 times annually. Provide staff with laboratory expertise and assist in monitoring clinical trials site laboratory quality with the COR and NIMHD Quality Assurance (QA) programs. Meet with the NIMHD program and contracting staff to review annual site performance and monitoring reports for participating population health and clinical research sites. The Contractor shall provide population health, clinical and statistical analysis and reports. More specifically: Provide scientific, technical, and administrative support for the development, implementation, and analysis of the specified research, including considerations of experimental design, sample size calculation, and interim and final primary and secondary analyses specified by study protocols, as requested by the COR. Establish data elements to be recorded by the protocol research records, as requested by the COR and in conjunction with the protocol development team for each specific research project. Develop study forms for standardized collection of data items. Develop documentation and coding for computerization of data for retrieval, analysis, and reporting. Provide for timely and accurate data collection and submission, data entry, data quality assurance, retrieval of source documentation, and generation of data and safety monitoring reports. Provide training for staff of population health, clinical and laboratory sites in data management procedures. Provide data input, editing, electronic data storage, database management, data retrieval, and statistical analysis using well-documented database management and statistical computer software programs. Develop methodology, perform analyses, and provide results from meta-analyses of selected data sets derived from population health and clinical research studies that focus on health disparities. Provide data analysis and results. More specifically: Perform statistical analyses of study data to test study hypotheses and evaluate potential confounding variables and/or covariates, as requested by the COR. Data analytic techniques needed include approaches to analyzing multiple measurements of biologic variables over time within participants and between participant groups, with consideration for normal changes in these variables with demographics. Provide for biweekly to monthly communication, as needed, of analytic progress and results through routine meetings (the majority to be virtually) with COR or designees and periodic generation of reports. The Project Manager shall attend all meetings. The Epidemiologist, Statistician, and Senior Systems Analyst shall attend these meetings on an as needed basis dependent upon the PI’s request. Provide programming and statistical support adequate for the timely generation of additional analyses requested by the COR. Provide electronic data transmission between the Contractor, population health, clinical and laboratory sites, and NIMHD DIR using currently specified communications software and equipment. Provide for electronic mail transmission between the Contractor, population health, clinical and laboratory sites, and NIMHD DIR using commercially available communications software and equipment. Provide protocol development services and assistance. The Contractor shall provide services for the implementation and monitoring of multiple population health and clinical research studies. More specifically: Develop, initiate and coordinate implementation and oversight of protocols at all participating population health, clinical and laboratory sites designed by the COR and approved by the CO. Ensure compliance by sites with all requirements for protocol implementation, including IRB review and approval prior to protocol initiation, participant consent, and confidentiality requirements, and Federal bioresearch regulations and requirements for security and confidentiality of research records, and that each relevant population health and clinical research site staff member completes and maintains human research protection and Good Clinical Practice training, when appropriate. Draft, negotiate, execute, administer, monitor, renew and/or modify as necessary with approval by CO a site-specific, protocol-specific budget for each protocol to be conducted by population health, clinical and laboratory sites, based on the anticipated number of participants to be enrolled. Provide training for staff of clinical and laboratory centers in procedures for implementation and conduct of specific protocols. Retraining may be required to be performed as necessary. Provide training in and ensure the fulfillment and maintenance of standards for Good Clinical Practices (GCP) and Good Clinical Laboratory Practices (GCLP) across population health and clinical research sites and staff, whenever appropriate. Ensure timely development and execution of material transfer agreements (MTAs) and data transfer agreements (DTAs) between the sponsor(s) and population health and clinical research sites. The Contractor shall provide services for the development and review of research activities. More specifically: For specific new protocol topics identified by the COR, identify a protocol development team consisting of Contractor staff, NIH staff, subcontractors, and/or consultants. Provide support for the planning and conduct of protocol development team meetings. Submit at the initial meeting a protocol development plan for COR review and approval, addressing regulatory issues, data collection forms development, drug distribution plan, protocol timeline, and participating sites. Develop a protocol document including background, objectives and endpoints, design, patient numbers, source, management, and selection, study agents or other interventions, clinical and laboratory monitoring, laboratory services, toxicity management, adverse experience reporting, evaluation of response, statistical considerations, data collection and monitoring, human subjects’ considerations, biohazard containment, and data and safety reviews. Review, edit, and rewrite draft protocols based on COR’s review. Prepare and maintain the necessary documentation for application submissions in compliance with FDA requirements. Upon completion of a final protocol, renegotiate subcontractor budgets with the approval of the CO and implement the new protocol at participating sites. For ongoing protocols, provide, at the request of the COR, support for the planning and conduct of meetings of protocol committees and subcommittees, data and safety monitoring boards, and investigators. Provide administrative, technical, and logistical support at the request of the COR and with approval of the CO as needed for interaction and collaboration of the Subcontractors with other institutes, agencies, and organizations conducting activities relevant to health disparities research. Support the identification, development, implementation, and evaluation of interventions to improve health outcomes and reduce health disparities, including assessment of feasibility, acceptability, effectiveness, and potential impact. Provide consultants with specialized expertise related to population health and clinical research especially related to health disparities, as requested by NIMHD DIR. Plan, organize, and coordinate meetings involving internal and outside experts. This meeting will be an important venue to discuss important and complex scientific issues related to research protocols and emerging research priorities. Provide support services for ongoing population health and clinical research studies, which include, but are not limited to, the following: site monitoring, subcontract management and invoicing, protocol management, oversight of data management and data analysis, study agent procurement, team meetings, regulatory compliance assurance, site activation and protocol registration, safety monitoring, committee management, data management services, oversight of central and site laboratories and pharmacies, protocol team support, FISMA compliance and IT security, laboratory equipment support, and training of site personnel, to support this effort. Provide Core infrastructure support for ongoing population health and clinical research at the sites, including but not limited to the following: maintenance of IRB/EC regulatory reporting, subject recruitment and follow-up, Community Advisory Board (CAB) support for meetings, protocol updates and reporting, attendance and participation in site monitoring visits, attendance at the annual network meeting, invoicing and other report preparation. Experience coordinating data from all aspects of ongoing protocols, studies, and trials. Experience in initiating and managing 3-6 studies each year. Experience initiating and managing studies of different sizes from approximately 100 participants up to approximately 10,000 participants. Experience working with populations experiencing health disparities, e.g., people in low socioeconomic conditions, living in rural underserved areas, and racial and/or ethnic populations who have documented health disparities based on diseases and conditions. Experience initiating and managing studies with a length in time from a few months for cross-sectional studies to a few years in clinical studies. Experience managing studies of varying complexities from simpler studies, which may be qualitative studies involving in-depth interviews with about 100 people; to more complex studies that involve a multi-site clinical trial with 1-2 years follow-up including biospecimen collection. Commercial Availability of Services – Based on preliminary market research, the Government anticipates that the contemplated research services may be noncommercial in nature. However, interested respondents are encouraged to identify comparable services available in the commercial marketplace. If so, describe which portions of the requirement could be met commercially and which would require customization, integration, or specialized development. Provide supporting information, including customary pricing practices and potential firm-fixed-price arrangements, if available. Industry Feedback on Draft SOW – Respondents are encouraged to provide comments or recommendations on the draft SOW, including opportunities to clarify requirements, improve performance outcomes, identify potential implementation challenges, or incorporate commercially available approaches. Identify any provisions that may unnecessarily limit small business participation and suggest practical alternatives. Any recommendations should identify the applicable SOW section when possible. Anticipated Award Date: The Government expects to award an Indefinite Delivery Indefinite Quantity (IDIQ) contract approximately in September 2027. Disclaimer and Important Notes: This notice does not obligate the government to award a contract or otherwise pay for the information provided in response. The Government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s qualifications to perform the work. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. After a review of the responses received, a presolicitation synopsis and solicitation may be published in SAM.gov. However, responses to this notice will not be considered adequate responses to a solicitation. No award will be made as a result of this notice. The Government will NOT be responsible for any costs incurred by the respondents to this Notice. This notice is for information purposes only. CONFIDENTIALITY: No proprietary, classified, confidential, or sensitive information should be included in your response. The government reserves the right to use any nonproprietary technical information in any resultant solicitation(s). Responses and Capability Statements: Interested Small Businesses that believe they possess the capabilities necessary to undertake this project should submit an electronic copy of their capability statement addressing the areas listed above to the attention of Edwin Osorio, Contract Specialist (E-mail: edwin.osorio@nih.gov) and Lisa Schaupp, Contracting Officer (E-mail: lisa.schaupp@nih.gov). Please state clearly in the subject line of the email that it is in response to the Sources Sought notice no.75N94027R00005. Please limit responses to 20 pages or less, exclusive of resumes. Electronic capability statements should be received by the Contracting Officer and Contract Specialist by 4:30 PM Eastern time on November 25, 2026. Respondents must submit their capability statement via electronic submission only. Capability statements must identify the 1) organization name, address, point of contact, contact phone number, and email address; 2) Small Business status of the organization, NAICS code along with SAM.gov Unique Entity Identifier (UEI) and CAGE code, if assigned, size and type of business (e.g., 8(a), HUBZone, etc.). No phone calls will be accepted. The designated NAICS code for this effort is 541715 and the size standard is 1,000 employees or less. Respondents may provide brief SOW comments and commercial availability information within the existing 20-page response limit. The Government may use the information received to refine the draft SOW and acquisition strategy; participation does not preclude responding to any future solicitation. | - | Market Research | 11/25/2026 |
Questions and Answers (84) Solicitation 36C24526Q0637 Set-aside status. The Amendment #3 notice on SAM.gov shows the Original Set Aside field as blank. The SF 1449 (Block 10) and VAAR 852.219-73 in the solicitation reflect a total set-aside for certified SDVOSBs. Please confirm whether this acquisition remains a 100% SDVOSB set-aside after Amendment #3. Correct this BPA/RFQ remains a 100% SDVOSB set-aside Evaluation basis. For the LPTA evaluation, will the Government compare total price for the base year only, or the total of the base year plus all four option years? Will option-year pricing be evaluated? total of the base year plus all four option years Quantities by site. Are the Section B.10 quantities the combined total for Baltimore VAMC, Loch Raven CBOC, and Perry Point VAMC? Please provide the breakdown by site, building, floor and flooring type, and confirm whether each quantity is an annual estimate for each contract year. This is an annual estimate for all sites. Line item reconciliation. Several lines appear not to align, and we would like to price them correctly: Tarkett Sheet Vinyl material is listed at 3,000 SY (27,000 SF), while Installation of Sheet Vinyl is listed at 9,000 SF. Which quantity is correct? SF should be SY. The SY is correct Is the 2,000 SY Tarkett Adapt (Woodlot Holly Oak) material line the material for the 2,000 SY Installation of Carpet Tile line? The carpet tile should be a separate line item. General Demolition, Floor Leveling and Smoothing and Furniture Lift (occupied spaces) are each listed at 30,778 SY. Does this quantity cover the combined area of the LVT and sheet vinyl installations? What is the Government's expectation for demolition and leveling on the Epoxy Flooring (15,000 SF) and Carpet Tile areas? Yes--This combines both areas. The expectation for epoxy flooring installation will not differ from LVT. The recommended application/method is to be specified by the contractor as the SME (Subject matter expert). Materials and selections. Please confirm that the contractor furnishes all materials listed in B.10. Colors and styles are shown as TBD. When will selections be provided, and should offerors price a stated base or average cost? Will substitutions of equivalent products be considered? There are no substitutions Existing floor condition. Has asbestos or lead testing been completed on the existing flooring and adhesives at all three sites? If material is found, who is responsible for abatement and for the related schedule impact? Are moisture and alkalinity test results available? Asbestos and lead testing is completed at all sites. VA ensures the proper personnel are in place for abatement. BPA terms, schedule and labor Order limits. Section B.9 leaves the per-order limit and the ceiling amount blank. Please provide both, any minimum guarantee, the expected number and typical size of orders per year, and the typical lead time between an order and the start of work. The Government estimates, but does not guarantee, that individual BPA Orders placed against this Agreement may reach $1,500,000.00/per Order. This Order Limit may be increased by mutual agreement of the parties as necessary, in whole or part. The authorized Ceiling Limit of the Agreement is set at $6,000,000.00 over the period covered by the Agreement; this ceiling is also not a guarantee. The Ceiling Limit may also be raised in association with order Limit increases or other conditions which, by mutual agreement of the parties, maybe considered necessary. Authorization for individual Task Orders above the stated Task Order and/or Ceiling Limits must be coordinated through the Contracting Officer before larger valued orders can be issued and prior to commencement of work. All unauthorized work, regardless of amount, will be processed through the ratification process. Period of performance. Section B.10 shows a base period of 09-01-2026 through 08-31-2027, and B.2 shows the BPA dates as TBD. Please confirm the revised base and option period dates, given the November 18 quote date. The Installation of Sheet Vinyl line shows a POP end date of 08-16-2027 while other lines show 08-31-2027. Please confirm which date applies. Time frame of contract award Base Year December 1, 2026 to November 30, 2027 plus 4 option renewal years Wage determination. The attached wage determination is dated 7-22-2026 and is titled Baltimore. Does it apply to all three sites, including Perry Point (Cecil County)? Please confirm whether it is a Service Contract Labor Standards or a Davis-Bacon determination. Wage Determination for Baltimore and Cecil County are attached Service Contract Labor Standards Working in occupied facilities. Please describe the requirements for working hours, after-hours and weekend work, infection control (ICRA) and phasing, badging and escorts, material staging and storage areas, and loading and elevator access at each site. Who moves furniture and equipment that is not covered by the Furniture Lift line? The work hours are reflected in the RFQ. The VA observes all national holidays. After work hours are on a case by case and determined by the needs of the service. CLINs x007 "Epoxy Flooring; Color TBD" (B.10): is there a required epoxy system type (e.g., self-leveling, broadcast/slurry, mortar, or flake), minimum thickness, and performance criteria? This will be determined prior to the project of any installations-as epoxy will not be a regular material used. For epoxy areas, who is responsible for concrete moisture/RH and pH testing (ASTM F2170 / F1869)? If readings exceed the system's limits, is moisture mitigation priced under CLIN x009 or handled by task-order modification? handled by task-order modification VAAR 852.219-75 (pp. 55-56) has no box checked. Which limitation on subcontracting applies: services (50%) or special trade construction (75%)? Please confirm that the cost of materials is excluded. Also, will 852.219-73(e) be measured by base/option period or per order? Services (50%) 852.219-73(e) will be measured by base/option period. 14. Does a Buy American requirement (FAR 52.225-1 or 52.225-9) apply to materials? The SF1449 says 52.212-5 is attached, but its text isn't in the posted RFQ. 52.225-1 or 52.225-9 is not listed on the RFQ 52.212-5 is not checked on the SF1449 therefore text would not be posted 15. E.3 (p.61) says award will be LPTA, but E.8 (p.65) says best value with technical, past performance, and price. Which governs? Also, what are the per-order limit and BPA ceiling in B.9, which are left blank (p.8)? Refer to question #7 Order Limits 16. Carpet tile. Please provide the manufacturer, collection and product name, style number, color name and number, tile dimensions, fiber and construction, backing, installation pattern, and approved adhesive. Please confirm whether carpet material is contractor-furnished and identify the applicable material supply line. Carpet tile Spec: Tarkett Carpet Tile Hidden Arbor and Sweater Knit 24x24 color TBD 17. LVT. Please provide the complete specification for the listed Tarkett Contour Series 6 by 48 inch LVT, including exact collection and product number, color name and number, overall thickness, wear-layer thickness, backing, finish, installation method, and approved adhesive. Please clarify how the separately listed Tarkett Adapt, Woodlot Holly Oak relates to this scope. This will be determined prior to installation. 18. Sheet vinyl. Please provide the manufacturer, collection and product name, product number, color name and number, homogeneous or heterogeneous construction, thickness, backing, roll width, finish, and approved adhesive. Please include the compatible weld rod, heat-welding requirements, flash-cove height, cove former, cap, and corner details. Please provide product data sheets and identify any different product or color selections by facility or area. Sheet vinyl spec: Tarkett IQ Optima Sheet Goods 19. Please provide the required wall-base and transition specifications, including manufacturer, product, material, dimensions, profile, and color or finish. Please identify the required transitions between new flooring, existing finishes, and different flooring types. Contractor will determine optimal wall transitions based on the project requirement, as the SME (subject matter expert). 21. During the walkthroughs, we understood that all furniture moving would be performed in-house by the VA. Please confirm that the VA will clear furniture, contents, and equipment before work begins and return them after the required curing period, including any necessary disconnects and reconnects. Please clarify whether Item 0012, Furniture Lift, remains applicable. 22. Please confirm that LVT and sheet-vinyl work areas will be fully cleared and remain clear through installation and required curing, rather than requiring piecemeal installation around furniture. LVT and sheet-vinyl work areas will be fully cleared and remain clear through installation 23. Please confirm whether the VA will provide dumpsters and pay disposal charges at each facility. Please identify the designated disposal locations and confirm whether the contractor is responsible for transporting demolition debris to onsite containers or for offsite hauling and disposal as well. The VA has dumpsters for disposal at each site. 24. Please confirm whether temporary dust partitions, negative-air equipment, and associated monitoring will be provided by the VA or contractor. Please provide the required barrier-system specifications and applicable infection-control requirements, including responsibility for setup, maintenance, relocation, removal, and inspection. Contractor is responsible for providing all ICRA/PICRA materials. To include materials required for wall barriers when required (Level 3 or 4). Contractors are expected to provide materials and construct the wall barriers required. Negative air pressure machine will be provided by the VA if needed. 25. Please identify the VA representative responsible for coordinating room availability, occupant relocation, access, and infection-control approvals. Please confirm whether each released area will remain continuously available through demolition, preparation, installation, and required curing. Please identify any daily reopening requirements and who authorizes reopening. The COR or Interior Designer will provide all necessary coordination for all projects. Contractor is not responsible for the opening of any room. 26. Please reconcile the listed 7:00 a.m. and 7:30 a.m. start times and confirm normal working hours. Please identify any locations or activities that must be performed during evenings, nights, weekends, or holidays. Any work after hours will be coordinated prior to any installations. This will be determined by the needs of the applicable service. 27. Reference: B.11 Scope, p. 26; B.5(c), p. 6. The SOW requires a project manager or project designer and an installation foreman onsite. For each task order, please identify the required supervisory positions, minimum qualifications, approval submittals, and hours of physical presence. Must a superintendent or project manager be a direct employee of the prime, and must that person remain onsite whenever subcontractors work? Each task order will require a designer or project manager to monitor progress and ensure standards are in place. They will be a minimum of COR Level 1 certified. They are required to be onsite at time of the installation. There is no physical amount of time for this requirement, as each project varies. A qualified installation foreman may of course also be present but the VA will require a designer/COR level 1 employee to monitor project. No-- Where projects possibly run concurrently, each project will have it s own designer/project manager. 28. Reference: B.11 Safety and Security Precautions and Personnel Qualifications, p. 28; B.6(a), p. 6. Please identify whether each task order requires a separate Site Safety and Health Officer, Quality Control Manager, or other designated safety/QC representative beyond the onsite personnel identified on page 26. Specify prime-employment requirements, certifications, experience, full-time coverage, and whether one qualified person may combine these roles with superintendent or foreman duties. Each task order will require it s own safety personnel, each task order requires a separate Site Safety and Health Officer, Quality Control Manager, or other designated safety/QC representative based on the needs of the project. Each project may have it s own requirements (i.e patient care areas etc.) 29. Identify the applicable safety/QC specifications, any EM 385-1-1 requirements and edition, required plans and daily reports, and whether staffing varies with task-order size, location, work shift, or hazard level. Contractors are expected to comply with OSHA standards. No-the Interior Design staff does not vary based on task orders. 30. Reference: B.11 Objective and Scope, pp. 25-26. Before pricing and issuance of each task order, who will prepare and approve the Infection Control Risk Assessment (ICRA), any Preconstruction Risk Assessment (PCRA), and the infection-control permit: VA Infection Prevention, the COR, the contractor, or another party? Please provide the applicable forms, assessment matrix, approving officials, and review time. Confirm that the required class, work-area limits, patient risk group, and controls will be identified in the task-order solicitation before its price and schedule are agreed, including orders at Baltimore, Loch Raven, and Perry Point Interior Design staff will prepare the ICRA & PCRA. ID will coordinate with Infection control for approval of the ICRA & PCRA prior to the start of any project. All ICRA/PCRA requirements are expected to be performed by the contractor. Contractor will be expected to provide necessary materials and the construction of any wall barriers required by ICRA/PCRA. 31. Reference: Site-visit discussion reported by J&G; B.11 Scope, p. 26; Unpacking/Uncrating, p. 27. Our understanding from the site visit is that the Government will remove all furniture before the flooring contractor begins each task order. Please confirm this applies to every order at all three campuses and that the flooring contractor is not required to lift, move, disassemble, store, protect in storage, or reinstall furniture. Clarify responsibility for workstations, beds, file cabinets, appliances, medical equipment, contents, and associated IT/electrical/plumbing disconnections and reconnections. Interior Design will remove all furniture prior to any installation. However, there may be an instant where some furniture may need to be moved/prior. Contractor will not be responsible for the removal of any medical equipment. Equipment or medical items will be removed by VA personnel/Biomed. 32. Confirm that the Government will deliver cleared work areas and keep them clear through installation and required curing and identify the procedure if an area is not ready as scheduled. ID will ensure areas are cleared and remain clear through installation. 33. Reference: B.10, CLINs 0008 and 0012 and corresponding option CLINs, pp. 10-23; E.3, pp. 61-62.CLIN 0012 includes 30,778 SY of Furniture Lift in occupied spaces, repeated in CLINs 1012, 2012,3012, and 4012. This appears inconsistent with the site-visit direction that the Government will remove furniture. Will these CLINs be deleted from the schedule and evaluated price? If retained, define the exact exceptional scope and when it may be ordered, and issue uniform instructions on whether bidders must quote a rate, enter zero, or use another designation. Please confirm that pricing these lines does not place furniture moving in the flooring installation rates or authorize it without an applicable order. ID will ensure furniture is removed from the space prior to installation. However, if there is an instance where furniture must be removed by the contractor-it will be priced accordingly. 34. Reference: B.11 Scope, p. 26; Debris, p. 27; B.10, CLIN 0009 and option equivalents. The SOW assigns removal and disposal to the contractor but directs debris to VA-provided dumpsters and a scrap cage. For each campus, confirm whether the Government provides containers, hauling, and final disposal at no charge for all nonhazardous carpet, carpet tile, pad, LVT/VCT, sheet flooring, epoxy debris, cove base, adhesive/mastic scrapings, underlayment, and floor-preparation waste. Identify prohibited materials, volume or weight limits, and any offsite disposal the contractor must price. Please state whether disposal labor is paid through the demolition CLIN or installation rates, so it is included once, and define payment for required contractor hauling and tipping fees. The VA provides disposal by means of dumpsters and scrap cage. There are disposal area at all sites. Perry Point has a metal scrap yard. 35. Reference: B.11 Debris, p. 27; Safety and Security Precautions, p. 28. Please identify the approved debris routes, loading points, dumpster/scrap-cage locations, and cardboard recycling locations at each campus. Specify covered or sealed carts, bagging, elevator restrictions, daily removal, cleanup, and container exchange requirements. The VA provides disposal by means of dumpsters and scrap cage. There are disposal area at all sites. Perry Point has a metal scrap yard. 36. Are carpet take-back, flooring recycling, minimum diversion percentages, waste plans, weight tickets, or disposal receipts required? No, they are not required 37. Identify responsibility for overflow or un37available VA containers and any required contractor roll-off permits or containment. Where hazardous or contaminated waste is expressly included in an order, provide separate segregation, manifest, transporter, disposal-facility, and generator-signature responsibilities; confirm such waste may not enter the ordinary VA dumpsters. There are no hazardous materials areas specified for flooring installations. 38. Reference: B.6(a), p. 6; B.11 Scope, p. 26; Equipment and Work Areas, p. 28. For each campus and task order, please identify required contractor site facilities, including a field Reference: B.6(a), p. 6; B.11 Scope, p. 26; Equipment and Work Areas, p. 28. For each campus and task order, please identify required contractor site facilities, including a field office or trailer, superintendent/QC workspace, meeting area, storage container, portable toilets, handwashing facilities, and temporary lighting or ventilation. No. The VA will not provide storage containers, portable toilets, and temporary lighting or ventilation. Handwashing facilities are located in the restrooms in all facilities, all sites, all campuses. No temporary facilities will be provided. 39. Reference: B.11 Scope, p. 26; Equipment and Tools and Work Areas, p. 28; Installation, p. 29. The SOW requires contractor storage, directs installation from shipments and warehouse stock, and requires removal of tools when the contractor leaves. Please identify available secure, conditioned storage and acclimation areas at each campus, including space for flooring, adhesives, and hazardous products. May approved tools, containment equipment, and materials remain secured onsite overnight or between phases? There will be no storage provided for contractors. 40. If daily removal is required, confirm the limits and available loading access. Identify responsibility for material receipt, inventory, room tagging, double handling, damaged Government stock, and maintaining manufacturer-required temperature and humidity during storage, acclimation, installation, and cure. Storage for materials will not be provided-other than the immediate area within the project area. This will be included in the scope of the project. 41. Reference: B.11, pp. 25-30; Baltimore floor plans and campus visitor maps; Amendment #3 site-visit notice. The furnished maps identify visitor services and campus locations rather than dimensioned flooring work limits. Before each task-order quote, will the Government provide marked plans identifying buildings, rooms, areas, existing and new flooring, demolition limits, and phasing? Yes prior to the start of any project, the VA/COR will provide building location, room information and floor plans with applicable dimensions to reference. 42. Confirm field measurement access before pricing. Identify contractor entrances, loading docks, freight elevators and reservations, floor-load limits, haul distances, escort requirements, and delivery/parking arrangements at all three campuses. Yes measurements will be provided to the contractor prior to the start of each project. 43. Clarify the Loch Raven buildings covered by the BPA, including the Alameda clinic versus the broader Loch Raven campus, and any access restrictions caused by ongoing construction. All buildings located on the Loch Raven campus are included in the BPA. Ongoing construction will be assessed for access, determined by the current activities. 44. Reference: B.11 Scope, p. 26; B.10, pp. 9-24. The SOW cites 800,000 SF of unimproved flooring, 66% replacement totaling 480,600 SF, and 120,150 SF per year over a base plus four options. These figures do not reconcile: 66% of 800,000 is 528,000 SF, and five years at 120,150 SF is 600,750 SF. Correct the figure should reflect 800,000 SY instead of SF. This a rough estimate, of the exact amount of flooring that needs changed it will change over time. 45. Please issue corrected annual and total estimated quantities by product and campus, identify any overlapping supply-only quantities, and confirm the quantities controlling price evaluation and ordering. Reference: B.11 Scope, p. 26; B.10, pp. 9-24. The 3.5 total is an educated estimate. As we will now know exactly how much flooring we will utilize each year. 46. The SOW cites 800,000 SF of unimproved flooring, 66% replacement totaling 480,600 SF, and120,150 SF per year over a base plus four options. These figures do not reconcile: 66% of 800,000 is 528,000 SF, and five years at 120,150 SF is 600,750 SF. Separately, the annual scheduled flooring product/system quantities total 310,000 SF if CLINs 0001, 0003, 0006, and 0007 are distinct. Please issue corrected annual and total estimated quantities by product and campus, identify any overlapping or supply-only quantities and confirm the quantities controlling price evaluation and ordering. The total 3.5 is over the base plus 4 years. It is an estimate of 700k for each year. As we do not know exactly how much we will use each year funds or materials. 47. Reference: B.10, CLINs 0003 and 0013 and corresponding option CLINs, pp. 9-23. Sheet-vinyl material is listed at 3,000 SF, equivalent to 27,000 SF, while sheet-vinyl installation is listed at 9,000 SF in each year. Please confirm whether material quantity should be 1,000 SY, and the installation quantity should be 27,000 SF. Correct-the material quantity should be 1,000 SY, installation quantity should be 27,000 SF 48. Reference: B.10, CLIN 0009 and option equivalents, pp. 10-23; B.11 Scope, p. 26. CLIN 0009 includes 30,778 SY, equivalent to 277,002 SF, for General Demolition, Floor Leveling and Smoothing. Please identify the flooring types, number of existing layers, adhesive removal method, and substrate conditions included in this rate. Is it payable only where demolition is ordered,separately from installation, including Government-furnished material installations? Each flooring type may be different. Most areas are being replaced with carpet/tiles The spaces can include and are not limited to cove-base removal, bonded epoxy removal, mechanical grinding, and underlayment removal are included or separately priced. Underlayment are line items and priced within the task order. 49. Reference: B.10, CLINs 0001-0015 and option equivalents, pp. 9-24; B.11 Scope, p. 26. Please provide a CLIN inclusion matrix defining material-only, labor-only, and furnish-and-install items. In particular, identify the material paired with carpet installation 0008; confirm the relationship of LVT 0006 to installation 0011 and sheet vinyl 0003 to installation 0013; and define whether epoxy 0007 is a complete installed system. Identify where freight, adhesive, fasteners, demolition/disposal, skim coat, protection, transitions, supervision, and final cleaning belong. The SOW says pricing includes demolition and preparation, while CLIN 0009 prices them separately; please establish a consistent method that avoids either duplication or unpaid scope. Each task order will price materials required prior to the installation. This will be determined by the scope each project. 50. Reference: B.6, pp. 6-7; B.9, p. 8; B.10, pp. 9-24; B.11 Ordering Procedures, p. 27. Orders may vary from small to large, but the schedule has no separate mobilization, supervision, ICRA, temporary-facility, testing, or hazardous-material line items. Each project has its own needs and is specific to requirements and will be priced accordingly i.e ICRA requirements. The VA will not provide any temporary facility or storage. 51. Please identify any minimum task order size or charge and the expected order-size range and frequency. No--there is no minimum task order size. Reference: B.10, pp. 9-24; B.11 Ordering Procedures and Performance Monitoring, pp. 27-29.Please define the measurement and payment basis for each unit. Are flooring quantities net installed area, gross room area, or purchased material including cutting waste, pattern match, attic stock, and full-carton/roll rounding? 52. It is understood and agreed that the BPA holder shall provide Fixed-Price proposals when requested by the Contracting Officer (CO). The contractor's proposal shall be priced using labor rates and labor categories here in provided. The CO will issue Fixed Priced Orders upon completion of negotiations of contractor proposals. 53. Reference: B.10, CLINs 0001, 0003, 0006, 0008 and 0011, pp. 9-11; B.11 Scope, p. 26. Please provide complete specifications and current product identifiers for Tarkett Adapt/Woodlot Holly Oak, sheet vinyl, and Contour 6-by-48-inch LVT. Confirm the product category paired with carpet installation and whether VCT, although named in installation CLIN 0011, is Governmentfurnished or requires another supply item. Specify thickness, wear layer/backing, dimensions, performance and fire/smoke criteria, slip resistance, chemical resistance, approved adhesives, colors,and required installer qualifications. Are named products mandatory or are approved equals permitted? All Tarkett materials and specs have been provided. There are no substitutions for Tarkett materials. 54. Reference: B.10, CLIN 0007 and option equivalents, pp. 10-22; B.11 Scope, p. 26. For the 15,000 SF annual epoxy item, please identify the required system, manufacturer or performance basis, total thickness, primer, body coats, aggregate, topcoat, finish, and slip/chemicalresistance criteria. The epoxy will be used seldom-therefore it will be specified/determined upon each task order. When used, it will include removal, repairs and all necessary actions to install. 55. Reference: B.10, CLINs 0002, 0004, 0005 and option equivalents, pp. 9-23. Please confirm that one CO for each adhesive means one complete four-gallon pail, and define one EA of weld rod by diameter and length per spool. Verify the annual quantities of 18 C-EX pails, 195 Roll Smart pails, and 15 weld-rod units against the corrected product quantities and manufacturer coverage, including which adhesive serves each flooring product and where LVT adhesive is priced. Are these quantities fixed evaluation estimates, actual consumable quantities, or allowances? It is understood and agreed that the BPA holder shall provide Fixed-Price proposals when requested by the Contracting Officer (CO). The contractor's proposal shall be priced using labor rates and labor categories here in provided. The CO will issue Fixed Priced Orders upon completion of negotiations of contractor proposals. 56. Identify whether residual adhesive/rod remains Government property and how additional manufacturer-required consumption is authorized and paid. Any unused materials will be government property. Any unusable material may be disposed of. 57. transitions without a separate CLIN. For 1,600 FT of heat welding and 50 FT of Flash Cove and Corners, define seam requirements, cove height, cove former, cap strip, and inside/outside corner details. Should corners be measured individually rather than by FT, and are weld rod and flash-cove accessories furnished under these rates or other CLINs? Measurements and methods are to be determined by the contractor for efficiency of materials and labor. 58. Reference: B.11 Scope, p. 26; B.10, CLIN 0009 and option equivalents. Please define the quantitative limits of minor preparation/skim coat included in the rates, including maximum depth, average thickness, coverage percentage, flatness tolerance, and required adhesiveresidue removal. The VA cannot determine such rare instances pre-maturely. 59. Distinguish routine patching from self-leveling underlayment, deep fills, failed substrate removal, structural repairs, crack repair, joint treatment, and replacement of deteriorated wood or gypsum underlayment. Measurements and methods are to be determined by the contractor for efficiency of materials and labor. 60. Will each task order identify known repairs before pricing? Yes, each task order will identify known repairs before pricing 61. Establish separate measurable items or another approved pricing mechanism for concealed deterioration or preparation exceeding the defined limits after demolition. This will be determined before installation and will be included in pricing. 62. Reference: B.11 Objective and Scope, pp. 25-26; Installation, p. 29. Who performs and pays for substrate moisture, relative-humidity, pH, adhesion, and other manufacturer-required testing on each task order, and what standards, frequency, and acceptance limits apply? If spaces are identified with moisture issues, the VA will identify these instances prior if needed and make determining factors to rectify prior to installation. 63. Reference: B.11 Scope, p. 26; Installation, p. 29; C.1(b), p. 31. Please identify required product data, room layouts, samples, mockups, installer credentials, shop drawings, and approval periods for each task order. For flooring supplied from Government warehouse stock, identify who verifies condition, quantity, compatibility, batch/shade, and warranty eligibility Specify required contractor workmanship and manufacturer warranties, their duration and commencement, and responsibility for defects in Government-furnished products or preexisting substrate conditions. Identify whether attic stock, maintenance instructions, product/lot records, manufacturer inspections, or warranty registrations are required and the CLIN covering these deliverables. Manufacture warranties will apply to all installations. 64. Reference: B.11, pp. 25-29; furnished campus maps and Baltimore floor plans. Before each task order is priced, will the Government define the number and size of phases, room vacancy windows, sequencing, and maximum area that may remain out of service? Yes, it will be defined 65. Please identify any daily requirement to reopen rooms or corridors, remove/rebuild containment, install temporary walking surfaces, or protect uncured flooring. Confirm responsibility for patient/staff relocation,clinical shutdowns, alternate egress, fire-alarm/HVAC coordination, permits, and after-hours escorts. Re-opening of rooms is the responsibility of VA personnel and the subject matter experts i.e the COR, Infection control, safety etc. 66. Establish the process for Government-directed resequencing and additional mobilizations when rooms cannot be released together or operations interrupt the approved installation/cure sequence. VA/COR will determine. 67. Reference: B.7, p. 7; B.11 Contractor Responsibilities, p. 27; Installation and Overtime, pp. 29-30. The SOW gives a 7:30 a.m. start on page 27 and a 7:00 a.m. installation start on page 29, with occasional evening/weekend work. Please confirm the normal shift, billable/productive hours, delivery windows, and the portion of work bidders must assume occurs after hours. Regular Hours are defined in the RFQ. After hours will be rare and determined based on the service needs. Quoted prior to installation. 68. How are premium shifts, overtime, weekend/holiday work, and repeated short shifts priced when the schedule has no premiumrate items? Clarify the daily/seventh-day overtime wording on page 30 and the required written approval authority, including reconciliation of service-chief approval with CO authorization for additional price or holiday work. COR will coordinate work overtime with service chief prior to installation. 69. Clarify how a task order issued near year-end is completed and which rates apply when performance spans an option boundary or a Government-directed delay Issued by CO Firm Fixed Price 70. Reference: B.9 Authorized Limits, p. 8; B.11, pp. 25-27. The BPA order limit and overall ceiling are blank, and the SOW anticipates emergent failures. Please provide the intended per-order limit, BPA ceiling, anticipated annual spending/order count, typical order size, and any minimum purchase commitment. What maximum number of simultaneous task orders, sites, and shifts must the contractor support? Define routine and emergency response times, estimating turnaround, start/completion requirements, and whether emergency standby or priority service must be included in standard rates. Clarify whether the listed annual quantities are evaluation estimates only and whether no minimum work volume is guaranteed. Estimates only. The VA cannot determine such rare occurrences pre-maturely. 71. Reference: C.2, pp. 37-38; D.1, p. 58; attached Wage Determination 2015-4265, Revision 33, pp. 1-7.The RFQ incorporates Service Contract Labor Standards and attaches WD 2015-4265, Revision 33, dated May 13, 2026. Please confirm the applicable labor-standard treatment for flooring demolition, preparation, replacement, and installation, including any construction wage determination required for particular orders. Identify the governing determination and revision for each campus; the attached locality list does not identify Cecil County for Perry Point. Clarify required classifications for resilient flooring, carpet, epoxy/coating, demolition/preparation, and hazardous-material work; the conformance procedure for unlisted work; applicable fringe benefits; and required payroll reporting.Please issue all governing determinations before final pricing. Please refer to the Wage Determination for Baltimore and Cecil County 72. Bidders must quote the base and four option years. Please clarify whether each year has independently proposed fixed unit rates and how incorporated wage/fringe adjustment provisions will be applied without duplicating escalation already priced. Identify the effective wage-determination revision for each period, required supporting documentation, notice deadlines, and treatment of orders spanning periods. Are any material-price, freight, tariff, or product-discontinuation adjustments permitted during a period, or must those risks be covered entirely in the quoted annual rates? Firm Fixed pricing/ those risks must be covered entirely in the quoted annual rates 73. Define how approved substitute flooring systems are priced if the listed product becomes unavailable during the BPA. No substitutions 74. Reference: C.7-C.8, pp. 40-41; B.9, p. 8. C.8 leaves the general-liability and automobile-liability amounts blank and requires general-liability coverage without an asbestos exclusion before award. Cannot be determined as this will be a case by case occurrence. 75. Please provide all required limits and endorsements and explain whether the asbestos provision applies when testing/abatement is performed by a separate Government contractor. Yes, asbestos provision applies when testing/abatement is performed by a separate Government contractor. 80. Identify any required pollution/professional coverage and whether approved specialty-subcontractor coverage satisfies any portion. Please also confirm whether bid, payment, performance bonds, or other payment protection will be required at BPA award or by individual task order, the applicable order thresholds, and how associated premiums are to be priced. Contractor is expected to maintain all applicable insurance coverages. 81. Confirm whether compliance is measured separately for each task order or over the base and each option period. Compliance is required on all task orders. Does the latest solicitation remain a Service-Disabled Veteran-Owned Small Business set-aside, or has it been revised to unrestricted/full-and-open competition? The public notices and third-party listings appear inconsistent. Correct it is a Service-Disabled Veteran-Owned Small Business set-aside, Were the October 20 21 site visits mandatory for quotation eligibility, or may a contractor that did not attend still quote based on the published documents? One member of the desired contracting bidder must have attended the walk-thru May a prime contractor use qualified flooring subcontractors for portions of the work, provided it quotes and manages all three VA locations and meets all applicable limitations on subcontracting? Contractors must meet all requirements for all three sites. | - | Special Notice | 11/18/2026 |
Additional Details
Solicitation Number
NSIR-26-0032
Archive Date
Jul 23, 2026
Office Address
ROCKVILLE, MD, 20855