GovChime
Notice ID: 8a9e223c83944950ae9ce21978226cfdSpecial Notice

Building Technologies Research and Integration Center: Technology Collaborations for US Building Technologies Industries

Active, responses due . Full description on SAM.gov.

Overview

Response deadline
12:00 PM EST
Posted
December 13, 2023
Notice type
Special Notice
NAICS
541715: Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
Agency
Department of Energy

Notice details

Office
ORNL UT-BATTELLE LLC-DOE CONTRACTOR
Place of performance
Oak Ridge, 37831
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
ORNL-BTRIC-TC-2020-04-17
Notice ID
8a9e223c83944950ae9ce21978226cfd

Description

Building Technologies Research and Integration Center Technology Collaborations for US Building Technologies Industries Oak Ridge National Laboratory (ORNL) is seeking industry partners to participate in short-term, collaborative projects within the Building Technologies Research and Integration Center (BTRIC) to accelerate development of new energy efficient building technologies. This opportunity will provide selected participants access to ORNL's experienced staff and unique equipment and capabilities to demonstrate advanced concepts with intent to develop and deploy innovative and energy efficient building technologies. Description UT-Battelle, LLC, acting under its Prime Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy (DOE) for the management and operation of the Oak Ridge National Laboratory, conducts research and development in support of the DOE Building Technologies Office (BTO). The DOE Building Technologies Office partners with industry, small business, universities, and other stakeholders to identify and invest in innovative technologies with the potential to improve the energy productivity of buildings without sacrificing occupant comfort or product performance, as well to enhance the global competitiveness of the United States. ORNL is requesting cost-shared proposals from industry to assess applicability of technologies that can reduce the energy intensity of U.S. buildings by 35% by 2035, and 50% by 2050 relative to 2005. The mission of the Building Technologies Office is to develop and accelerate the adoption of cost-effective technologies, techniques, tools, and services that enable high-performing, energy-efficient, and demand-flexible residential and commercial buildings in both new and existing building markets. As part of the technology collaborations conducted under this announcement, the proposer will describe the potential energy savings and novel non-energy impacts that may be realized by the targeted project. Technology areas of interest HVAC, water heating, and appliances Windows and building envelope Solid-state lighting Building energy modeling Sensors and controls Advanced building construction Thermal energy storage Grid-interactive efficient buildings (GEB) Residential building integration Commercial building integration Projects will be conducted during a short-time period. At least 20% cost share, which can be funds-in to ORNL or in-kind contributions (e.g., facilities, services, and staff time), is required on the part of the industrial participant. Participant cost-share cannot be met using funds from U.S. Government sources. Funds will not be provided to the industrial participant by ORNL. The intent is to increase the in-kind cost share from 20% to 50% in the future, that timing to be determined and approved by BTO. Note: THIS IS NOT A PROCUREMENT REQUEST. Eligibility Eligibility is limited to industries that currently manufacture in the U.S. for commercial applications in the residential or commercial building technologies market, or to industries that will be able to do so as a direct result of these collaborative efforts. There is no restriction based on the particular building technology area, but should align with facilities, expertise, and capabilities of BTRIC. Background DOE's Building Technologies Research and Integration Center (BTRIC) at ORNL offers distinctive world-leading capabilities in building technologies, characterization facilities as well as leveraging advanced manufacturing capabilities at ORNL’s Manufacturing Demonstration Facility (MDF). The BTRIC provides a collaborative, shared infrastructure to help industry adopt innovative, energy efficient technologies that improve the energy productivity of buildings without sacrificing occupant comfort or product performance. ORNL’s expertise in building technologies, materials, and advanced manufacturing will assist the building industries in accelerating the developing of existing and new innovative technologies. More information about the ORNL BTRIC can be found at: https://www.ornl.gov/facility/btric From concept to commercialization, ORNL's world-leading facilities and expertise enable research focused on reducing the energy intensity of U.S. industry, supporting development of new products, and strengthening our nation's clean energy economy to meet the commercial and national security needs of tomorrow. Objective The objective of these BTRIC Technical Collaborations is to collaborate with industry to investigate, improve, develop, and deploy innovative energy efficient building technologies. In so doing, creating and preserving domestic jobs is a goal of this solicitation. The primary focus of this announcement is to target projects that will impact the following technical areas: HVAC, water heating, and appliances Windows and building envelope Solid-state lighting Building energy modeling Sensors and controls Advanced building construction Thermal energy storage Grid-interactive efficient buildings (GEB) Residential building integration Commercial building integration Laboratory Support It is anticipated that industrial partners will work collaboratively with members of the BTRIC staff to conduct project activities across the various areas of expertise within the BTRIC. Intellectual Property and Proprietary Data Projects will be performed with a Cooperative Research and Development Agreement (CRADA) or User Agreement as the contract instrument. See the announcement package for a sample CRADA agreement. DOE and ORNL respect the importance of industry's intellectual property and data security while balancing the need to document the benefits of public expenditures. Provisions relating to proprietary information and intellectual property are set forth in the CRADA. A Non-Disclosure agreement (NDA), if required, can be put into place during development of the project to facilitate discussions while protecting the partner's proprietary information. It is preferred that proprietary information NOT be included in the proposal. If company proprietary information is included in the proposal, the specific information should be marked as such, and UT- Battelle/ORNL will treat that information as business confidential. Proposal Guidelines Proposals should be completed using the attached template in the announcement package. Proposers are encouraged to consult with ORNL technical staff to develop a work scope that is technically feasible and compatible with ORNL facilities and capabilities. Proposal Deadline and Submission This announcement will remain open subject to availability of funding from the DOE Building Technologies Office. Completed proposals must be submitted in PDF file format by email to BTRICcollaboration@ornl.gov. The subject line should include: ORNL BTRIC Technology Collaborations. Receipt of proposals will be confirmed within one week of submission. Proposal Evaluation and Timeline This is an open announcement. Selection of winning proposals will be at the discretion of the DOE BTO. Proposal evaluation criteria will include compatibility with ORNL facilities and capabilities, technical feasibility and merit, the potential to commercialize new products and create US jobs, and the potential for buildings energy savings. BTO and the BTRIC reserve the right to select all, a portion, or none of the submissions. Point of Contact All questions relating to this announcement should be directed to Melissa Lapsa by email, lapsamv@ornl.gov, or by phone, (865) 576-8620. Cooperative Research and Development Agreement (CRADA) Information Awardees are required to enter into a short-form CRADA or User Agreement with UT-Battelle. Because of the need for accelerated placement and execution of the projects, the most favorable terms allowable within DOE guidelines have been established and will not be subject to negotiation. Failure to enter into a CRADA in a timely manner will result in termination of further project consideration. CRADAs have provisions that address the protection of the partners' existing proprietary information and intellectual property, as well as the information and intellectual property generated and made during the collaboration. More specifically, each party owns its own inventions while jointly developed inventions will be jointly owned. In all cases, U.S. Government will retain government use rights. CRADA durations are expected to be at least one year. For more specific terms and conditions, please review the model short-form CRADA and User Agreement template attached to this announcement.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (3)

  • ORNL Model Short-Form CRADA Template_2023.pdf

    261 KBAdded in Special Notice version 7Posted
    Download
  • BTRIC TC Proposal Template 12-11-23.docx

    35 KBAdded in Special Notice version 7Posted
    Download
  • BTRIC Notice of Opportunity updated 12-11-2023.docx

    22 KBAdded in Special Notice version 7Posted
    Download

Lifecycle

  1. 1
    Version 1Special Notice

    uilding Technologies Research and Integration Center: Technology Collaborations for US Building Technologies Industries

    Notice d1e109033aa040528e44650b635468c1 on SAM.gov

  2. 2
    Version 2Special Notice

    Building Technologies Research and Integration Center: Technology Collaborations for US Building Technologies Industrie

    Notice 661dbb4fe8d04fbfa3b5acf8f2e3c9f0 on SAM.gov

  3. 3
    Version 3Special Notice

    Building Technologies Research and Integration Center: Technology Collaborations for US Building Technologies Industries

    Notice 576fef8dd60d4914a7f88fdd16327938 on SAM.gov

  4. 5
    Version 5Special Notice

    Building Technologies Research and Integration Center: Technology Collaborations for US Building Technologies Industries

    Notice 96ad866aea684c2d856585ac4302bd4e on SAM.gov

  5. 6
    Version 6Special Notice

    Building Technologies Research and Integration Center: Technology Collaborations for US Building Technologies Industries

    Notice 553b458c2ee346fe87a2d6408f57db84 on SAM.gov

  6. 7
    Version 7Special NoticeCurrent

    Building Technologies Research and Integration Center: Technology Collaborations for US Building Technologies Industries

    Notice 8a9e223c83944950ae9ce21978226cfd on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Grid Research Innovation and Development Center Technology Collaborations for US Power Electronics Industries Oak Ridge National Laboratory (ORNL) is seeking industry partners to participate in short-term, collaborative projects within the Grid Research Innovation and Development Center (GRID-C) to accelerate development and deployment of grid integrated power electronics technologies. This opportunity will provide selected participants access to ORNL's experienced staff and unique equipment and capabilities to demonstrate advanced concepts with intent to develop and deploy innovative and energy efficient power electronics for electrified grid integration and modernization. Description UT-Battelle, LLC, acting under its Prime Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy (DOE) for the management and operation of the Oak Ridge National Laboratory, conducts research and development in support of the DOE Transformer Resilience and Advanced Components (TRAC) Program of the Office of Electricity (OE). The DOE TRAC program partners with industry, small business, universities, and other stakeholders to identify and invest in innovative technologies with the potential to accelerate the integration of grid systems and clean energy resources through power electronics technologies, as well to enhance the global competitiveness of the United States. ORNL is requesting cost-shared proposals from industry to develop next generation technologies for grid modernization to support the mission of OE and TRAC for reliable, resilient, and secure electricity delivery systems. As part of the proposals submitted under this announcement, the proposers are expected to describe the enabling technologies as well as potential energy savings and novel non-energy impacts that may be realized by the targeted project. Technology areas of interest Materials & Components: for grid devices, power electronics systems, grid storage devices Embedded Controllers: integrated advance analog and digital electronics, sensing devices Subsystems Devices and Interfaces: Converter, Inverter, controls and protection, prototypes, solid state components protection, transformers Resource Integration & Management Systems: Mutli-stage converters, Software Platforms, Algorithms Grid systems Architecture: real time systems modelling and evaluation Grid Modelling and Transient Analysis Projects will be conducted during a short-time period. At least 20% cost share, which can be funds-in to ORNL or in-kind contributions (e.g., facilities, services, and staff time), is required on the part of the industrial participant. Participant cost-share cannot be met using funds from U.S. Government sources. Funds will not be provided to the industrial participant by ORNL. The intent is to increase the in-kind cost share from 20% to 50% in the future, that timing to be determined and approved by the TRAC program. Note: THIS IS NOT A PROCUREMENT REQUEST. Eligibility Eligibility is limited to industries that currently manufacture in the U.S. for commercial applications in the residential or commercial grid hardware and power electronics market, or to industries that will be able to do so as a direct result of these collaborative efforts. There is no restriction based on the component or grid technology area, but should align with facilities, expertise, and capabilities of ORNL’s GRID-C. Background The Grid Research Innovation and Development Center (GRID-C) at ORNL offers access to distinctive world-leading capabilities bringing together electrification for utilities, buildings, and transportation sectors to support integration of grid systems and clean energy resources as well as leveraging advanced manufacturing capabilities at ORNL’s Manufacturing Demonstration Facility (MDF). GRID-C embodies this combination with research and development in power and energy system, power electronics, components, controls, real-time platforms, simulation, modeling, and cybersecurity to provide a vertical integration to support demonstration of modernization, security, and resiliency for grid systems integration and clean energy resources. ORNL’s expertise in power electronics and controls, materials, and hardware/software integration will assist the power electronics industries in accelerating the improvement existing and developing new innovative technologies. More information about the ORNL GRID-C can be found at: https://www.ornl.gov/content/grid-c-labs From concept to commercialization, ORNL's world-leading facilities and expertise enable research focused on reducing the energy intensity of U.S. industry, supporting development of new products, and strengthening our nation's clean energy economy to meet the commercial and national security needs of tomorrow. Objective The objective of these GRID-C Technical Collaborations is to collaborate with industry to investigate, improve, develop, and deploy innovative integrated and resilient grid resources for further intelligent electrification at the grid interfaces. In so doing, creating and preserving domestic jobs is a goal of this solicitation. The primary focus of this announcement is to target projects that will impact the following technical areas: Materials & Components: for grid devices, power electronics systems, grid storage devices Embedded Controllers: integrated advance analog and digital electronics, sensing devices Subsystems Devices and Interfaces: Converter, Inverter, controls and protection, prototypes, solid state components protection, transformers Resource Integration & Management Systems: Mutli-stage converters, Software Platforms, Algorithms Grid systems Architecture: real time systems modelling and evaluation Grid Modelling and Transient Analysis Within these technical areas, the target projects could be related to hardware or software design, application or use case development, modeling and simulation for impact of system integration, test and evaluation of proposed technology, controls, or solutions, or small-scale prototyping in a relevant environment. Laboratory Support It is anticipated that industrial partners will work collaboratively with members of the ORNL staff to conduct project activities across the various areas of expertise within GRID-C. Intellectual Property and Proprietary Data Projects will be performed with a Cooperative Research and Development Agreement (CRADA) as the contract instrument. See the announcement package for a sample CRADA agreement. DOE and ORNL respect the importance of industry's intellectual property and data security while balancing the need to document the benefits of public expenditures. Provisions relating to proprietary information and intellectual property are set forth in the CRADA. A Non-Disclosure agreement (NDA), if required, can be put into place during development of the project to facilitate discussions while protecting the partner's proprietary information. It is preferred that proprietary information NOT be included in the proposal. If company proprietary information is included in the proposal, the specific information should be marked as such, and UT- Battelle/ORNL will treat that information as business confidential. Proposal Guidelines Proposals should be completed using the attached template in the announcement package. Proposers are encouraged to consult with ORNL technical staff to develop a work scope that is technically feasible and compatible with ORNL facilities and capabilities. Proposal Deadline and Submission This announcement will remain open subject to availability of funding from the DOE Transformer Resilience and Advanced Components Program. Completed proposals must be submitted in PDF file format by email to GRIDCcollaborations@ornl.gov. The subject line should include: ORNL GRID-C Technology Collaborations. Receipt of proposals will be confirmed within one week of submission. Proposal Evaluation and Timeline This is an open announcement. Selection of winning proposals will be at the discretion of the DOE TRAC. Proposal evaluation criteria will include compatibility with ORNL facilities and capabilities, technical feasibility and merit, the potential to commercialize new products and create US jobs, and the potential for improvement to grid components, electrification, and integration. TRAC reserves the right to select all, a portion, or none of the submissions. Point of Contact All questions relating to this announcement should be directed to Dr. Madhu Chinthavali by email, chinthavalim@ornl.gov, or by phone, (865) 341-1411. Cooperative Research and Development Agreement (CRADA) Information Awardees are required to enter into a short-form CRADA with UT-Battelle. Because of the need for accelerated placement and execution of the projects, the most favorable terms allowable within DOE guidelines have been established and will not be subject to negotiation. Failure to enter into a CRADA in a timely manner will result in termination of further project consideration. CRADAs have provisions that address the protection of the partners' existing proprietary information and intellectual property, as well as the information and intellectual property generated and made during the collaboration. More specifically, each party owns its own inventions while jointly developed inventions will be jointly owned. In all cases, U.S. Government will retain government use rights. CRADA durations are expected to be at least one year. For more specific terms and conditions, please review the model short-form CRADA attached to this announcement.
92%
Special Notice08/02/2029
Notice of Opportunity: BUILTT for DOE Pilot Technologies The Department of Energy (DOE), in partnership with the National Nuclear Security Administration (NNSA), announces the availability of technologies under the Bolstering Underutilized Industry by Leveraging Technology Transfer (BUILTT) pilot program. The pilot is being conducted by the Nevada National Security Sites (NNSS), Y-12 National Security Complex, and Kansas City National Security Campus (KCNSC). Program Overview BUILTT is intended to help qualified small and medium-sized businesses (SMBs) manufacture low-volume, high-impact technologies developed by DOE/NNSA Labs, Plants, and Sites. These technologies support mission requirements but may have limited commercial markets or insufficient production volume for traditional technology licensing. The program uses a Cost Reduction License (CRL), under which a qualified SMB may receive rights to produce a specified technology for a nominal licensing fee. The CRL is intended to support the sale of the resulting products to DOE, NNSA, and other government customers at a fair and reasonable pre-negotiated price. Where applicable, the CRL may also address commercial sales. Technology Areas The pilot technologies generally involve specialized manufacturing, instrumentation, sensing, materials, electronics, and analytical or production systems. Examples of technology types include: - Specialized optical and high-speed imaging equipment for experimental diagnostics; - Radiation, chemical, pressure, and environmental sensing systems; - Precision electrical and mechanical components; - Advanced materials, coatings, bonding, and fabrication processes; - Laboratory-scale mixing, processing, and production equipment; and - Software, data-analysis, and instrumentation-support technologies. A separate attachment to this posting provides the exact technology descriptions, applicable intellectual-property information, and available patent links. Prospective respondents should review that attachment to identify technologies that align with their capabilities. Eligibility and Participation Participation is open to U.S.-based SMBs that meet applicable U.S. Small Business Administration requirements. Preference may be given, when appropriate, to businesses located near participating DOE/NNSA sites and to businesses with designations such as SBA 8(a) or HUBZone. Interested businesses may be evaluated based on: - Technical and manufacturing capabilities; - Relevant facilities, equipment, personnel, and experience; - Ability to meet applicable quality, safety, security, and regulatory requirements; - Ability to support low-volume production and government customers; - Financial and organizational capacity; and - Alignment with one or more of the listed technologies. Selected respondents will be subject to vetting and due diligence before any matchmaking, licensing, or procurement activity occurs. Participation in this posting does not guarantee selection, a license, a purchase order, or a contract. How to Respond Interested businesses should contact the DOE/NNSA BUILTT program team at TPIP@nv.doe.gov with the subject line “BUILTT for DOE Pilot Technologies.” Responses should identify the respondent’s areas of interest and briefly describe relevant technical, manufacturing, and government-contracting capabilities. Additional information may be requested during the evaluation process. General Conditions Submission of a response does not create an express or implied contract between the respondent and Mission Support and Test Services, LLC (MSTS), DOE, NNSA, NNSS, Y-12, or KCNSC. MSTS and the participating organizations are not obligated to review or evaluate any response, select a respondent, issue a CRL, place an order, or award a contract. Respondents are not entitled to compensation, damages, or remuneration if this posting is modified, suspended, canceled, or not followed. Primary Point of Contact Technology Partnerships and Intellectual Property Office Email: TPIP@nv.doe.gov Keywords: technology transfer, licensing, manufacturing, commercialization NAICS Code: 541715 — Research and Development in the Physical, Engineering, and Life Sciences (except Biotechnology and Nanotechnology)
69%
Market Research03/31/2027
Notice of Opportunity: Bolstering Underutilized Industry by Leveraging Technology Transfer (BUILTT) for DOE The Department of Energy (DOE), in partnership with the National Nuclear Security Administration (NNSA), announces an opportunity for small and medium-sized businesses (SMBs) to participate in the Bolstering Underutilized Industry by Leveraging Technology Transfer (BUILTT) program. This pilot initiative is being conducted by the Nevada National Security Sites (NNSS), Y-12 National Security Complex, and Kansas City National Security Campus. https://www.energy.gov/technologycommercialization/fiscal-year-2025-climr-projects-commercializing-energy-technologies Program Overview: The BUILTT program is designed to facilitate the transfer of low-volume, high-impact technologies developed at DOE/NNSA Labs, Plants, and Sites (LPS) to qualified SMBs. These technologies are often mission-critical but have limited commercial markets, with the government frequently being the primary or sole customer. The program introduces a new technology transfer mechanism, the Cost Reduction License (CRL), which enables SMBs to manufacture and supply these technologies to DOE and other government agencies at a fair and reasonable price. Key Program Elements: • Technologies included in the program are anticipated to be fully developed, tested, and ready for production, but are typically excluded from traditional technology transfer due to their limited market size. • The CRL is a licensing agreement that allows SMBs to produce and sell specified technologies to DOE/NNSA at a set price, with the potential for additional commercial sales if applicable. • As applicable, the program will pool eligible technologies from participating DOE/NNSA sites and match them with vetted SMBs through a standardized process. • Depending upon SMB location, the pilot project cost share partners, including regional economic development organizations and technical service providers, may be available to assist SMBs interested in participating in BUILTT pilot. Eligibility and Participation: • Participation is open to U.S.-based small and medium-sized businesses as defined by the U.S. Small Business Administration. • Preference may be given to businesses located in the regions of the participating DOE/NNSA sites and to those meeting designations such as SBA 8(a) or HUBZone. • Interested SMBs will undergo a vetting and due diligence process to assess technical capabilities and alignment with the needs of the technologies being offered. Process and Timeline: • The program will be conducted in phases, including technology identification and pooling, SMB sourcing and vetting, matchmaking, and pilot CRL execution. • Educational materials can be provided to participating SMBs regarding the licensing process and technology requirements. Additional Information: • The BUILTT program is funded by the DOE Office of Technology Commercialization and National Nuclear Security Administration and is intended to serve as a model for scalable, replicable technology transfer across DOE and other government agencies. How to Respond: Interested parties should contact the DOE/NNSA BUILTT program team at TPIP@nv.doe.gov with the subject line: ‘BUILTT for DOE Pilot’. Additional details, including specific technology listings and application procedures, will be provided in subsequent postings. General Conditions The submission of a response to this opportunity does not create any implied or express contract between an OFFEROR and MSTS obligating MSTS to review or evaluate the proposal or to make an award in accordance with the evaluation and selection criteria specified herein. This solicitation and the terms specified herein are strictly for the convenience of MSTS. By submitting a response to this opportunity, OFFERORS acknowledge and agree that they shall not be entitled to any compensation, damages, or remuneration of any kind whatsoever in the event that MSTS fails to follow, or deviates from, this solicitation. Primary Point of Contact: Technology Partnerships and Intellectual Property Office Email: TPIP@nv.doe.gov Keywords: license, manufacturing, technology, commercialization NAICS Code: 541715 – Research and Development in the Physical, Engineering, and Life Sciences
69%
Market Research04/01/2027
Manufacturing Demonstration Facility Technology Collaborations for US Manufacturers in Advanced Manufacturing and Materials Technologies Oak Ridge National Laboratory (ORNL) is seeking industry partners to participate in short-term, collaborative projects within the Manufacturing Demonstration Facility (MDF) to accelerate development of new energy efficient manufacturing technologies. This opportunity will provide selected participants access to ORNL's experienced staff and unique equipment and capabilities to demonstrate advanced concepts with intent to develop and deploy new manufacturing processes or materials in U.S. manufacturing industries. Description UT-Battelle, LLC, acting under its Prime Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy (DOE) for the management and operation of the Oak Ridge National Laboratory, conducts research and development in support of the DOE Advanced Manufacturing Office (AMO). The DOE Advanced Manufacturing Office partners with industry, small business, universities, and other stakeholders to identify and invest in emerging technologies with the potential to create high-quality domestic manufacturing jobs and enhance the global competitiveness of the United States. ORNL is requesting cost-shared proposals from industry to assess applicability of new technologies that can reduce manufacturing energy intensity or produce new, energy-efficient products. As part of the technology collaborations conducted under this announcement, the proposer will describe the potential manufacturing and life cycle energy savings that may be realized by the targeted project. Projects that focus on advanced manufacturing and materials technologies for commercial applications related to additive manufacturing or carbon fiber and composites are preferred. Projects will be conducted during a short-time period. At least 50% cost share, which can be funds-in to ORNL or in-kind contributions (e.g., facilities, services, and staff time), is required on the part of the industrial participant. Participant cost-share cannot be met using funds from U.S. Government sources. Funds will not be provided to the industrial participant by ORNL. Note: THIS IS NOT A PROCUREMENT REQUEST. Eligibility Eligibility is limited to industries that currently manufacture or process materials in the U.S. for commercial applications, or to industries that will be able to do so as a direct result of these collaborative efforts. There is no restriction based on a particular material system or manufacturing process; however projects should address advanced manufacturing and materials technologies in additive manufacturing or carbon fiber and composites. Background DOE's Manufacturing Demonstration Facility (MDF) at ORNL offers distinctive world-leading capabilities in manufacturing and materials research technologies and characterization facilities. The MDF provides a collaborative, shared infrastructure to help industry adopt energy efficient, rapid, and flexible manufacturing technologies to lower production cost, and create new products and opportunities for high-paying jobs. ORNL's expertise in material synthesis, characterization, and process technology will assist manufacturing industries in conducting assessments of new fabrication concepts and methods for improving existing technologies. The materials and processing technologies developed are expected to be deployed in new or existing manufacturing facilities. More information about the ORNL MDF can be found at: http://web.ornl.gov/sci/manufacturing/ From concept to commercialization, ORNL's world-leading facilities and expertise enable research focused on reducing the energy intensity of U.S. industry, supporting development of new products, and strengthening our nation's clean energy economy to meet the commercial and national security needs of tomorrow. Objective The objective of these MDF Technology Collaborations is to collaborate with industry to investigate, improve, and scale process methodology to reduce the risk and accelerate the development and deployment of innovative energy efficient manufacturing and materials technologies. Creation and preservation of domestic manufacturing jobs is a primary goal of this solicitation. The primary focus of this announcement is to target projects that will impact the technical areas of Additive manufacturing utilizing a broad range of direct manufacturing technologies for metal and polymer feedstocks using a variety of both established and innovative deposition systems and technologies. Carbon fiber and composites utilizing a broad range of carbon fiber synthesis, characterization, and compositing technologies from precursor evaluation through carbon fiber pilot scale production (25 metric tons/year) for low cost, lightweight, and higher-performance composite products incorporating carbon fibers and other material reinforcements. In addition to the above mentioned high priority technology categories, projects with sufficient merit may be approved in the following areas: Lightweight metals processing using advanced synthesis and processing technologies for low-cost titanium alloys, magnesium alloys, and metal matrix composite products Roll-to-roll processing using pulse thermal processing and other advanced processing technologies to develop low-cost manufacturing of flexible electronics, photovoltaics, energy storage systems, and other products Battery manufacturing innovative processing using ORNL's unique prototyping materials and evaluation facilities Laboratory Support It is anticipated that industrial partners will work collaboratively with members of the MDF staff to conduct project activities across the various areas of expertise within the MDF. Intellectual Property and Proprietary Data Projects with the potential for the generation of intellectual property will be performed with a Cooperative Research and Development Agreement (CRADA) as the contract instrument. See the announcement package for a sample CRADA agreement. DOE and ORNL respect the importance of industry's intellectual property and data security while balancing the need to document the benefits of public expenditures. Provisions relating to proprietary information and intellectual property are set forth in the CRADA. A Non-Disclosure agreement (NDA), if required, can be put into place during development of the project to facilitate discussions while protecting the partner's proprietary information. It is preferred that proprietary information NOT be included in the proposal. If company proprietary information is included in the proposal, the specific information should be marked as such, and UT-Battelle/ORNL will treat that information as business confidential. Proposal Guidelines Proposals should be completed using the attached template in the announcement package Proposers are encouraged to consult with ORNL technical staff to develop a work scope that is technically feasible and compatible with ORNL facilities and capabilitie? Proposal Deadline and Submission This solicitation will remain open subject to availability of funding from the DOE Advanced Manufacturing Office. Completed proposals may be submitted in PDF file format by email to MDFcollaboration@ornl.gov. The subject line should include: ORNL MDF Technology Collaborations and the name of the proposer. Proposal Evaluation and Timeline This is an open announcement. Selection of winning proposals will be at the discretion of the DOE AMO. Proposal evaluation criteria will include compatibility with ORNL facilities and capabilities, technical feasibility and merit, the potential to commercialize new products and create US jobs, and the potential for industrial energy savings. AMO and the MDF reserve the right to select all, a portion, or none of the submissions.
66%
Special Notice09/09/2029
**Please see Amendment 4 dated 11/03/2026.** **Please see Amendment 3 dated 11/02/2026.** **Please see Amendment 2 dated 10/30/2026.** **Please see Amendment 1 dated 10/15/2026.** NLR seeks to engage leading technical subject matter experts (SMEs) to help buildings industry stakeholders scale up and meet demand for lower-cost, high-quality buildings. SMEs will support DOE’s Building America program, both its just-launched new construction support program and existing support programs for building envelope retrofits. The new construction support program will provide technical assistance to help partners erect high-quality buildings faster and at lower cost, ultimately delivering savings to everyday Americans. NLR seeks leading subject matter experts (SMEs) in research, field validation, analysis, dissemination, and technical support efforts to help builders, manufacturers, contractors, and other industry stakeholders scale up and meet demand. This work will focus on factory optimization, product design and materials innovation, and digital tools and modeling. For envelope retrofits, this work will help reduce first costs and lower utility bills in existing homes by focusing on technical topics including, but not limited to, addressing moisture, humidity, and infiltration through envelope upgrades and whole-home solutions. Across both areas, SMEs will also conduct modeling and analysis, data collection, industry analysis, and market scaling support. This work will include knowledge transfer to provide actionable guidance and information to industry stakeholders. For over 30 years, DOE’s Building America Program has been a source of innovations and best practices needed to deliver affordable and efficient homes. NLR supports DOE’s Building America Program through scientific leadership and building science expertise to ensure high-quality, impactful results from Building America’s research efforts.
66%
Solicitation11/16/2026

Additional Details

Solicitation Number

ORNL-BTRIC-TC-2020-04-17

Archive Date

Dec 28, 2028

Office Address

Oak Ridge, TN, 37831