GovChime
Notice ID: 0f84765bf73229e404f04a255cce474aCombined Synopsis/Solicitation

43--SEWAGE PUMPS LAKE YELL

Archived on May 14, 2016. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
7:00 AM UTC+02:00
Posted
April 21, 2016
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
423830: Industrial Machinery and Equipment Merchant Wholesalers
Agency
Department of the InteriorNATIONAL PARK SERVICE

Notice details

Office
DSC CONTRACTING SERVICES DIVISION
PSC
43: PUMPS AND COMPRESSORS
Last updated
Dec 5, 2025

Identifiers

Solicitation number
P16PS00924
Notice ID
0f84765bf73229e404f04a255cce474a

Description

Amendment 0001 issued to include setting plan. MINIMUM REQUIREMENTS General The contractor shall furnish Fairbanks Nijhuis or equal vertical close-coupled drypit pumping units as specified below. Pumps shall replace existing Fairbanks Morse Pumps. Contractor/Supplier shall identify any and all piping modifications that may be required to install new pumping units into the existing configuration. Submit with proposal representative drawings, estimated scope of work and bill of materials detailing proposed piping modifications. Pumps with impellers attached directly to shafts are unacceptable. Pumps are to be connected to the electric motor by a flexible coupling. Service 1 Quantity: _3_ Basis of Design ¿ FN Model: 4¿B5443 (Each pump shall be capable of providing the following hydraulic conditions.) Design Flow: 400GPM Head: 108¿TDH Pump Efficiency: 55% minimum Maximum Pump Speed: 1800RPM Maximum Nameplate Motor HP: 30HP Driver to include: - 30 HP TEFC 1800RPM, 460V/60Hz/3Ph Motor, 1.15 SF ¿ - Altitude Corrected for 8,000¿ amsl Minimum Shutoff Head: 140¿TDH Maximum NPSHR at design: 12 FT Service 2 Quantity: _3_ Basis of Design ¿ FN Model: 4¿B5443 (Each pump shall be capable of providing the following hydraulic conditions.) Design Flow: 600 GPM Head: 115¿TDH Pump Efficiency: 64% minimum Maximum Pump Speed: 1800RPM Maximum Nameplate Motor HP: 40HP Driver to include: - 40 HP TEFC 1800RPM, 460V/60Hz/3Ph Motor, 1.15 SF - Altitude Corrected for 8,000¿ amsl Minimum Shutoff Head: 140¿TDH Maximum NPSHR at design: 25 FT Rotation They will be clockwise rotation when viewed from the driver end. Impeller Impeller shall be one piece, single suction, enclosed 2 vane, radial flow design with well-rounded leading vane edges and thick hydrofoil shape, which prevents the accumulation of solids and stringy material through the impeller. It is to be dynamically balanced and secured to the shaft by means of a key and fastener. Wiper vanes are not allowed. The impeller waterways and clearance between the impeller periphery and volute cutwater shall be capable of passing a 3¿ sphere. The impeller shall be adjustable by jacking bolts on the bearing housing, shims are not acceptable. Volute/Casing Volute shall be one-piece cast with flanged tangential discharge. Discharge flange shall be 125lb. ANSI drilling. Volute shall be designed to permit front and back impeller removal and be capable of rotation in increments to accommodate piping orientation independent of the base location. Diffusion vanes are not permitted. A contoured volute handhole for inspection and cleanout at the impeller as required. Nominal casing thickness is to be 1/2¿. Casing shall be hydrostatically tested to 1.5 times the design head of 1.25 time the shut-off, whichever is greater. Centerline discharge volute is not acceptable. Base and Elbow A rugged heavy duty fabricated steel base, with openings large enough to permit access to the suction elbow and cleanout bolted directly to the volute shall be provided. The vase shall be designed to support the assembled with of the pump and the driver. A cast iron suction elbow with 1-1/4¿ tap connection, handhole cleanout, and 125lb flat-faced flange conforming to ANSI drilling shall be furnished. A metal shaft guard completely enclosed the coupling will be provided. The coupling shall be a flexible type coupling manufactured by Falk or Woods (manufactures choice). Backhead Backhead shall be provided with an integrally cast sealing box. The sealing box is to accommodate a Double mechanical seal. Seal shall be provided with carbon vs. ceramic faces. Springs and hardware components shall be constructed of stainless steel. Flush water connections shall be provided for use with existing flush water system. Provisions are to be made for draining sealing box leakage. Fits Volute, suction, backhead and frame shall be manufactured with concentric shoulder fits to assure accurate alignment. Shaft The shaft shall be made from high quality steel, of sufficient diameter to carry the maximum load imposed and to prevent vibration and fatigue. The minimum shaft diameter between the bearings shall be 3.25¿. The torsional stiffness of the shaft shall be no less than 1.23 X 10**6 (in-lb/radian). Shaft is to be accurately machined along its entire length. A renewable 416 Stainless Steel, BHN of 450 ¿ 464 shaft sleeve, positive adhesive sealed, shall be protecting the shaft through the sealing box area. Wear Rings Stainless Steel, Axial type removable wear rings are to be provided on both the impeller and suction head. They shall provide a seal between the impeller and fronthead for reduction of recirculation. The impeller wear ring shall be approximately 50 Brinnell softer than the fronthead wear ring. Radial type or L type wear rings are not acceptable. Frame The bearing frame shall be of rugged, heavy-duty construction and line bored for accurate and permanent bearing alignment and bearing housings shall be dust proof. Bearings Radial (inboard) bearing shall be grease lubricated single row. Thrust (inboard) bearing shall be grease lubricated, angular contact duplex mounted bearings. Bearing to be designed for a minimum L10 of 100,000 hours while operating within the POR (preferred operating range) in accordance with AFBMA. Center to center distance shall be no less than 11¿. Quality Assurance Pumps are to be engineered and manufactured under a written Quality assurance program. The Quality assurance program is to be in effect for at least five (5) years, to include a written record of periodic internal and external audits to confirm compliance with such a program. All equipment preferably 100% manufactured in the USA. Material Specification Impeller Cast Iron A48-CL30 Shaft Steel A 108-C1141 or A332-C4140 Gland Half, interlocking Cast Iron A48-CL30 Volute Cast Iron A48-CL30 Fronthead Cast Iron A48-CL30 Backhead, frame Cast Iron A48-CL30 Frame Cast Iron A48-CL30 Bearing Housing Cast Iron A48 CL-30 Cover, bearing housing Cast Iron A48 CL-30 Housing, thrust Bearing Cast Iron A48 CL-30 Radial Bearing / Thrust Bearing Steel Packing Synthetic packing, graphite impregnated Key, coupling Steel A108 GR1018 Cover, handhole Cast Iron A48 CL-30 Base Cast Iron A48-CL30 Elbow Cast Iron A48-CL30 High Ring Base with Fabricated Steel Coupling Guard

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Woodin, Mary

Documents

No documents available.

Lifecycle

Solicitation:P16PS00924
  1. Combined Synopsis
  1. 2×
    Special NoticeApr 4, 2016

    43--SEWAGE PUMPS LAKE YELL

    Notice 5a57dd29d6710a5f573bcfc9d7ba0c26 on SAM.gov

  2. 2×
    Combined SynopsisCurrentApr 19, 2016

    43--SEWAGE PUMPS LAKE YELL

    Notice 0f84765bf73229e404f04a255cce474a on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Proposed procurement for NSN 3830012342995 POWER CONTROL UNIT,TRA: Line 0001 Qty 1 UI EA Deliver To: USS GEORGE WASHINGTON CVN 73 By: 0005 DAYS ADO Approved source is 98523 H20065D001. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis11/09/2026
This solicitation is for the contractor to deliver one (1) forklift to JT Myers Lock and Dam, 16501 Raben Road, Mt. Vernon, Indiana, 47620. Quotes are due on 28 August 2026 at 10:00 AM Eastern Time.NOTE: THIS RFQ IS SET-ASIDE FOR SMALL BUSINESS. The NAICS code for this procurement is 423830. The size standard is 1,000 employees.The solicitation will be available on the web only. Telephone and Fax requests for this solicitation will not be honored. Project files are Portable Document Format (PDF) files and can view, navigated, or printed using Adobe Acrobat Reader. To download the solicitation for this project, contractors are required to register at the Federal Business Opportunities. Amendments will be available from the beta.sam.gov website by download only. Prior to submission of quotes all contractors must have an active registration in the System for Award Management (SAM) database. To register or update information go to http://www.SAM.gov. Questions may be addressed to ProjNet. This announcement serves as the advance notice. ****PIEE soliciation description lists the NAICS code as 336612 incorrectly. The correct NAICS code is 423830 as listed in the above description.****
-Solicitation08/28/2026
The SANISANEX unit is a specialized commercial disinfection machine designed by Comac to rapidly sanitize and decontaminate indoor environments. Operating as a highly portable, battery powered compressor system, it utilizes a specialized spray gun to mix an antibacterial or antiviral chemical solution with compressed air. This process generates a fine, even mist that coats surfaces and hard-to-reach areas, efficiently neutralizing pathogens without oversaturating the room. Because of its mobility and speed, the unit is primarily used for deep-cleaning operations in high-traffic facilities such as schools, offices, gyms, public transit vehicles, and restaurants. The Sani Sport technology uses a patented ozone system to reduce harmful bacteria and viruses in and on personal protective equipment PPE and in enclosed spaces.
-Combined Synopsis07/20/2026
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 192126VSA00000016 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01. The associated North American Industrial Classification System (NAICS) code for this procurement is 423830 with a small business size standard of 100.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2026-06-15 11:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be in the Statement of Work The DHS ICE - Investigations & Operations Support Dallas requires the items to be Meet or Exceed. To review line items, terms, etc., refer to the link below. Solicitation and Buy Attachments ***Question Submission: Interested Sellers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, DHS ICE - Investigations & Operations Support Dallas intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DHS ICE - Investigations & Operations Support Dallas is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com.Sellers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Sellers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Sellers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Sellers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.
-Combined Synopsis06/15/2026
GRTE 237343 - "Rehabilitate 4 Lazy F Ranch Cabins for Employee Housing" UPDATE: See AM 003 for NPS responses to RFI's received. This solicitation is being issued as a Total Small Business Set Aside. Please see the attached solicitation package for details regarding this construction project at Grand Teton National Park. Please contact only the Contracting Officer at anthony_jasper@ios.doi.gov if you have questions pertaining to this project. Thank you for your interest in working with the National Park Service.
-Solicitation11/20/2026

Additional Details

Solicitation Number

P16PS00924

Archive Date

May 14, 2016