GovChime
Notice ID: 72352be3f48747d5bbb7c90e3f622581Sources Sought

Air Defense Artillery - Targets (ADA-T)

Responses closed . Full description on SAM.gov.

Overview

Response deadline
11:59 PM EDT
Posted
July 13, 2026
Notice type
Sources Sought
NAICS
336411: Aircraft Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.ACC-CTRS.ACC-APG.W6QK ACC-ORLANDO
Place of performance
Madison, Alabama
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
PANORL-26-P-0000-026878
Notice ID
72352be3f48747d5bbb7c90e3f622581

Description

Request for Information (RFI)

Intent of the Notice: Army Contracting Command - Orlando (ACC-Orlando), for the U.S. Army Capability Program Executive Simulation, Training, Test and Threats (CPE ST3), in support of Product Manager Tactical Training Systems (PdM TTS), is conducting market research to determine whether responsible industry sources exist that can provide uninterrupted Aerial Remotely Piloted Vehicle Target (ARPVT) systems (Group 2 and 3) and services support without substantial duplication of cost to the Government or unacceptable delays in fulfilling agency requirements. The Government is considering the most effective acquisition approach for continued ARPVT support, which may include an extension of the current Griffon Aerospace Inc. for up to five years for the ADA-T II contract, W900KK-22-D-0010. This RFI is issued for market research purposes and to assist the Government in determining whether the requirement should be competed or whether a noncompetitive action may be supportable under Revolutionary Federal Acquisition Regulation (FAR) Overhaul Part 6.103-1(c)(2). This RFI is issued in accordance with DFARS Revolutionary FAR Overhaul PGI 206.103-170.

Background: The ADA-T II contract was established to provide manufacturing of aerial targets, support services, related support equipment, mission payload system devices, training, and associated technical and logistics support. The current effort includes support for MQM-170, MQM-171 and MQM-186 aerial target operations and related field services.  The Government does not own build-to-print technical data packages (TDP) or software source code for the MQM-170, MQM-171, or MQM-186. Prior market research and acquisition planning associated with ADA-T II Delivery Orders recognized that the pre-existing ADA-T II IDIQ contract vehicle was established to address the technical scope of the effort, and that no readily available commercial solution was identified to meet the requirement without additional integration, qualification, transition, and schedule risk.

Brief Description: The Government requires continued ARPVT support to procure, operate, maintain, repair, transport, store, and support aerial target systems and associated equipment in support of live training, test, and evaluation events. The requirement may include, but is not limited to, engineering services, aerial target operations, target system production, depot-level repair and maintenance, mission payload support, field operations services, qualification training, inventory and transfer support, spares, ground support equipment, Government Furnished Property (GFP) accountability, reporting, logistics planning, and event support at CONUS and OCONUS locations as directed by the Government.

Purpose of Industry Response: The Government is requesting capability statements from industry to determine whether any source, other than the incumbent contractor, can perform the requirements within the Government’s required schedule while avoiding duplication of cost and transition delays. Responses should provide enough information for the Government to assess technical capability, schedule risk, cost duplication, access to necessary data/equipment, and relevant past performance. The Government will use the information received to support acquisition planning, market research, and determination of whether competition is practicable.

Requested Information:

1.       Company name, address, CAGE code, Unique Entity ID, point of contact, telephone number, and email address.

2.       Socioeconomic status, applicable NAICS code(s), and whether the company intends to perform as a prime contractor, subcontractor, teaming partner, or joint venture.

3.       Description of current technical capability to support MQM-170, MQM-171, and MQM-186 (or equivalent based on attached performance requirements) aerial target operations and any other ADA-T II target systems, including production, maintenance, field operations, launch/recovery, mission payload integration, and event support. If your firm does not possess the proprietary TDP, explain your strategy to reverse-engineer or develop equivalent systems, including estimated timelines for airworthiness certification.

4.       Evidence of access to technical data, software, tooling, configuration information, support equipment, qualified personnel, safety releases, airworthiness documentation, and supply chain needed to perform without Government-funded requalification or extensive transition.

5.       Specific transition plan and timeline to assume full performance with zero degradation to the operational tempo or support to scheduled training, test, and operational events. Identify any Government actions, data, GFP, facilities, or lead times required.

6.       Identification of the estimated Non-Recurring Engineering (NRE), start-up, and transition costs your firm would require to assume full performance and delivery of the ADA-T II requirement. This should include, but is not limited to, estimated costs and timelines for tooling, support equipment, First Article Testing (FAT), airworthiness/safety certifications, range integration, software development/integration, and program management start-up. (Note: The Government will utilize this data to internally assess potential duplication of costs and schedule impacts).

7.       Description of relevant past performance within the last five (5) years for aerial target manufacturing, unmanned aerial system target operations, range support, mission payload support, and field services for DoD customers.

8.       Identification of any commercial products, commercial services, or non-developmental items that could meet all or part of the requirement, including modifications required and estimated schedule to reach operational readiness.

9.       Risks, assumptions, constraints, proprietary restrictions, licensing limitations, export control considerations, and data rights issues that may affect performance, schedule, cost, or competition. Specifically address any limitations on the Government's use of technical data or software, and state whether the Government would receive Government Purpose Rights (GPR) for any deliverable.

10.     Recommended contract type, ordering approach, and any other information that would assist the Government in determining whether competition is practicable.

Responses: Interested sources shall submit written capability statements no later than 28 July 2026. Responses should be limited to 15 pages, excluding cover page, and shall be submitted electronically to Contract Specialist Phuong Hudson V, phuong.v.hudson.civ@army.mil and Procuring Contracting Officer Roberto J. Gotay at roberto.j.gotaygarcia.civ@army.mil. Proprietary information, if any, shall be clearly marked. The Government will not reimburse respondents for any costs associated with preparing or submitting a response. Oral communications are not acceptable in response to this RFI.

Government Evaluation of Responses: A determination by the Government not to compete any resulting requirement, based upon responses to this RFI, is solely within the discretion of the Government. Information received will normally be considered solely for acquisition planning and for determining whether competitive procurement is feasible. If responses do not demonstrate that another responsible source can meet the Government’s requirements without substantial duplication of cost or unacceptable delay, the Government may proceed with the appropriate noncompetitive acquisition strategy, subject to required reviews and approvals.

Attachments:

Attachment 1, RPVT Final Perf Specification

Attachment 2, MQM-186 Aerial Target Demonstrated Performance

Attachment 3, MQM-171 Demonstrated Performance

Disclaimer: This RFI does not constitute an Invitation for Bids (IFB), Request for Proposal (RFP), Request for Quotation (RFQ), or a commitment by the U.S. Government to issue a solicitation or award a contract. The U.S. Government will neither pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the U.S. Government. Additionally, all submissions become government property and will not be returned. Any information submitted by respondents is strictly voluntary.  

Full description on SAM.gov

Award Overview

Mentioned in the description

From description, unverified
determine whether any source, other than the incumbent contractor, can perform the requirements wit

We searched the solicitation description for the word “incumbent” and surfaced the surrounding text. This is not a confirmed match.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (3)

  • RFI Attachment 3 MQM-171 Demonstrated Performance.pdf

    150 KBAdded in Sources Sought version 1Posted
    Download
  • RFI Attachment 1 RPVTFinalPerfSpecification SAM.pdf

    216 KBAdded in Sources Sought version 1Posted
    Download
  • RFI Attachment 2 MQM-186 Aerial Target Demonstrated Performance.pdf

    223 KBAdded in Sources Sought version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Sources SoughtCurrent

    Air Defense Artillery - Targets (ADA-T)

    Notice 72352be3f48747d5bbb7c90e3f622581 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Issuing Agency: Project Management Office (PMO) Uncrewed Aircraft Systems Capability Program Executive, Aviation SFAE-AVN-U Agencies Capable of Issuing Contracts/Agreements: Army Contracting Command - Redstone Period of Availability: This Department of War (DoW) Drone Commercial Solutions Opening, open solicitation, will remain open in perpetuity until canceled. Call for Solutions will specify individual response times and requirements. Description of Program: In accordance with Executive Order 14307, the DoW Drone Marketplace is the strategy to scale the industrial base and accelerate production deliveries while empowering Soldiers with freedom of choice to meet mission needs. As part of this approach, the DoW will better incentivize industry innovation. DoW Drone Marketplace marks a significant pivot from traditional DoW acquisition business models to a free-market approach founded on the concept of continuous competition that drives innovation, where Soldiers’ demands are directly linked to industry provided capabilities. This CSO will enable the DoW to rapidly acquire and deliver innovative solutions to the Warfighter using commercial technology. SECTION A – INTRODUCTION AND AUTHORITY The DoW has identified the following needs: (1) to accelerate the adoption of advanced commercial technology; (2) to transform DoW Drone Marketplace capabilities; and (3) to grow the industrial base to appropriately support the DoW. This solicitation aims to provide the DoW with access to innovative solutions enabling the DoW to evolve quickly and maintain a competitive edge over adversaries. Industry is at the forefront of innovation, developing cutting-edge capabilities that will enhance the DoW capabilities and protect the Warfighter. The DoW will select vendors whose solutions demonstrate the greatest potential to achieve the DoW's missions. The DoW is maximizing existing authorities by publishing this CSO, open solicitation, combining any single authority or a combination of the authorities below: Federal Acquisition Regulation (FAR) 6.102(d)(2) – Other Competitive Procedures 10 U.S.C. §3458 – Authority to acquire innovative commercial products and commercial services using general solicitation competitive procedures / DFARS 212.70 – Defense Commercial Solutions Opening SECTION B - GENERAL INFORMATION The DoW anticipates that the CSO will be updated frequently to improve processes and to keep pace with evolving threats, needs and innovations. The CSO will be open in perpetuity until canceled bythe DoW. Companies are informed that ONLY a warranted Government Contracting/Agreements Officer (KO/AO) (not a Contracting Officer Representative or other personnel) may contractually bind the Government. The Government shall not be liable to pay for work performed by a company unless a warranted KO/AO has signed an agreement in writing stating that the Government shall pay. The Government shall not fund preparation of solution briefs/proposals, or support work efforts or tasks that are inferred from discussions with technical project officers. SECTION C – AREAS OF INTEREST (AOI) This CSO, open solicitation, covers any of the following example areas. These example areas shall be viewed as suggestive, rather than limiting, and are not reflective of the ONLY AOIs or in any priority of order. Intelligence, Electronic, Warfare, and Sensors Tactical Communications Soldier Equipment Ancillary Items Payloads Simulation and Stimulation Training and Instrumentation Unmanned Aircraft Systems (UAS): Full Systems Air Vehicles Maritime Systems: Surface and Undersea Systems Maritime Reconnaissance and Domain Awareness Littoral and Amphibious Support Ground Systems: Reconnaissance and Surveillance Systems Logistics and Equipment Transport Combat and Tactical Support Platforms Counter- UAS: Mutli-Domain Sensing and Detection Command, Control and Data Fusion Defeat Mechanisms (Kinetic and Non-Kinetic) Platform & Operation Integration Supply Chain and Logistics Installation Support and Innovation Additive Manufacturing Autonomous Vehicles Software Autonomous Behaviors Command & Control Launched Effects Drone Production (build at scale) SECTION D – COMMERCIAL SOLUTIONS OPENING (CSO) PROCEDURES There are two methods for responding under this CSO: (1) Innovative Warfighter Solutions submissions and (2) Call for Solution submissions. Method 1 - Innovative Warfighter Solutions (IWS) Provides a flexible and open-ended opportunity for industry partners to submit solution briefs to any AOI in Section C. This aspect of the CSO is designed to identify and bridge gaps in mission-critical capabilities by inviting innovative solutions from the private sector. The purpose is to encourage a wide range of responses that can enhance and support the example AOIs, foster collaboration and leverage cutting-edge technologies and methodologies to meet evolving operational needs. Companies shall follow the procedures outlined in the attachment when providing a submission to an IWS. The submission mailbox for AOI is identified in Section J. Method 2 - Call for Solutions (C4S) Provides an opportunity for industry partners to submit innovative solutions in response to Government issued C4S under any AOI in Section C. C4S aim to pinpoint and address critical gaps in essential capabilities by welcoming creative proposals from private sector entities. Companies shall follow the procedures outlined below and within the specific C4Ss posted. The individual C4S will identify how responses are to be submitted. Method 1 - IWS Overview Companies submitting an IWS in response to the AOIs shall follow the procedures outlined in the attachment. If the Government does not select a company’s submission for, as applicable, for phase 2 and/or 3, the submission may be retained in the Solution Basket. This allows the Government to reconsider the submission for future needs and funding opportunities, maximizing its value to both the vendor and the DoW. The IWS award procedures will utilize up to three (3) phases, as appliable: Solution Brief Live Demonstration and/or Pitch (optional) Commercial Solution Proposal (CSP) Method 2 - C4S Overview CS4 (referred to as “Calls”) will be released and posted via SAM.gov as an amendment under this CSO. The Call will include all relevant submission requirements and evaluation procedures and shall govern the process for evaluations and award. Submission requirements may vary in phases and may take the form of solution briefs, white papers, demonstrations, live pitches, etc. C4S are independent from the IWS procedures discussed above in Section D.1 IWS procedures do not apply to individual Calls. Calls may be written in a broad manner to maximize efficiency, innovation and application when approaching a problem and to allow for maximum participation from vendors who may not be familiar with submitting proposals to Government solicitations. The Government may post Calls at any time. Interested companies are encouraged to frequently check SAM.gov for updates to this solicitation and posted C4S. SECTION E - AWARDS The Government may choose to issue an award(s) in accordance with IWSs or C4S procedures and subject to the availability of funds. The KO/AO reserves the right to negotiate directly with the company on terms and conditions prior to execution of the resulting award instrument, including payment terms, and will execute the instrument on behalf of the Government. All payment obligations of the Government shall be subject to receipt of appropriations from Congress for the purpose, time, and amount of the obligation. Be advised, only a KO/AO has the authority to enter into, or modify, a binding instrument on behalf of the United States Government. Awards issued under this CSO may include, but are not limited to the following award instruments: FAR contracts under FAR Part 12 Commercial Procedures; any fixed price, or fixed price incentive contract type specified under FAR Part 16; and non-FAR agreements such as transaction agreements under 10 U.S.C. 4022 and 10 U.S.C. 4023; for the DoW and/or its customers that are directly relevant to enhancing the effectiveness of the AOI identified in Section J. In order to receive an award, the following must be met: Companies shall have a Unique Entity Identification (UEI) number and must register in the System for Award Management (SAM) prior to receiving an instrument. If a company does not possess a valid and active SAM registration, companies are advised to commence SAM registration before responding to a Call or IWS. Companies are required to maintain registration in SAM throughout the period of performance of the instrument and during any subsequent follow-on award. Companies shall also register in the prescribed Government invoicing system (Wide Area Work Flow: https://wawf.eb.mil/xhtml/unauth/registration/notice.xhtml.) Companies shall represent their small business size and status as required in this solicitation. Companies shall be determined to be responsible by the KO/AO and must not be suspended or debarred from award by the Federal Government nor be prohibited by Presidential Executive Order and/or law from receiving an award. Any actual or potential OCIs shall be identified to KO/AO prior to award. SECTION F – ITERATIVE PROTOTYPING Iterative prototyping is a development methodology where a prototype is created, tested, and refined through multiple cycles, incorporating user feedback and improvements in each iteration, to ensure the final product meets user requirements and expectations effectively. An Other Transaction (OT) for a prototype awarded or an award using 10 U.S.C. 4023 against this open solicitation shall allow for an iterative prototyping process and will be delineated in the award document. An iterative prototyping process will allow the Government to modify, by mutual agreement, the scope of a prototype contract or OT to allow for the adaptation and modification of the technology being prototyped to meet additional unique and discrete purposes/mission sets. The sequential prototype iterations may result in separate phased prototype awards rather than a modification of the original prototype award. These additional unique and discrete purposes/mission sets can be generated by the Government. SECTION I – NON-GOVERNMENT ADVISORS Non-Government advisors may be used in the evaluation of Solution Briefs, Pitches and during the Commercial Solution Proposal phase and negotiations under the IWS procedures or in C4S. Non-Government advisors will have signed non-disclosure agreements (NDAs) with the Government. The company understands that the Government may share proprietary company information with non-Government personnel for evaluation and administrative purposes only. The Government understands that information provided in response to this open solicitation is presented in confidence and may contain trade secret or commercial or financial information, and it agrees to protect such information from unauthorized disclosure to the maximum extent permitted or required by Law, to include: 18 U.S.C. 1905 (Trade Secrets Act); 18 U.S.C. 1831 et seq. (Economic Espionage Act); 5 U.S.C. 552(b)(4) (Freedom of Information Act); Executive Order 12600 (Pre-disclosure Notification Procedures for Confidential Commercial Information); and, Any other statute, regulation, or requirement applicable to Government employees. Companies shall label any information they want protected as confidential. Submissions will not be returned. The original copy of each submission received will be retained by the DoW and all other non-required copies destroyed. SECTION J - CONTACT INFORMATION IWS Solution Brief submissions as detailed in Section D, shall be submitted to the email address listed below and shall include the associated AOI in the subject line of the e-mail. If the respondent does not include the AOI in the subject line of the e-mail, the submission will NOT be reviewed. Area of Interest in Subject Line usarmy.redstone.cpe-avn.mbx.uasmarketplaceiws@army.mil C4S Brief submissions (Section D) shall be submitted in accordance with the instructions and points of contact provided in the Call. General questions surrounding this open solicitation shall be submitted to: Email address: USARMY Redstone Arsenal PEO AVN Mailbox DoW Drone Marketplace <usarmy.redstone.peo-avn.mbx.uas-marketplace@army.mil> SECTION K - DEFINITIONS "Call for Solution" (C4S) an announcement posted on SAM.gov, which may result in a contract or OT and includes submission instructions, evaluation criteria, timelines, how the DoW will treat late submissions, points of contact, and other specific information. The Call is a request for response from prospective industry partners. “Commercial Solutions Opening” (CSO) is a competitive procedure KO/AO may use to acquire innovative commercial items, technologies, or services. “Innovative” means any item that is (1) Any technology, process, or method, including research and development, that is new as of the date of submission of a proposal; or (2) Any application that is new as of the date of submission of a proposal of a technology, process, or method existing as of such date. “Innovative Warfighter Solutions” (IWS) is a competitive procedure for submitting an Innovative Warfighter Solution in response to a posted Area of Interest (AOI) under this Commercial Solutions Opening (CSO). These procedures create a pathway we call the Solution Basket. The IWS gives industry the opportunity to approach the Government with their innovative solutions. “Nontraditional Defense Contractor” is defined by DFARS 202.101 as an “entity that is not currently performing and has not performed any contract or subcontract for DoW that is subject to full coverage under the cost accounting standards prescribed pursuant to 41 U.S.C. 1502 and the regulations implementing such section, for at least the 1-year period preceding the solicitation of sources by DoW for the procurement (10 U.S.C. 3014).” “Nonprofit Institution” is defined in 15 U.S.C. § 3703 an organization owned and operated exclusively for scientific or educational purposes, no part of the net earnings of which insures to the benefit of any private shareholder or individual. "Other Transaction" refers to the statutory authority to enter into transactions other than procurement contracts, grants, or cooperative agreements. The DoW has the authority to enter into OTs for Research Projects (10 USC 4021), OT for Prototype Projects (10 USC 4022), and DoW relevant OT that support research (10 U.S.C. 4021). “Commercial Solution Proposal” (CSP): is a proposal that is submitted in response to a Call that is governed by a CSO or a response to an unsolicited proposal that is invited to Phase III. CSPs may be requested as a result of Solution Briefs and/or presentations/pitches. “Small Business” is defined under Section 3 of the Small Business Act (15 U.S.C. 632).
72%
Solicitation03/11/2031
The Government, in support of the Office of the Under Secretary of War for Acquisition and Sustainment (OUSD(A&S)), is issuing this Call for Solutions (C4S) against Commercial Solutions Opening (CSO) W58RGZ-26-S-C001-0004 under the authority of 10 U.S.C. § 3458. This Call will competitively acquire and/or onboard innovative commercial portable electronic conspicuity devices. The Government reserves the right to alter or cancel this call at any time. The Government will not pay for any information or administrative costs incurred in responding to this Call; all preparation and submission costs shall be solely at the interested party's expense. Furthermore, choosing not to respond to this C4S does not preclude participation in any future solicitations or procurement actions. The purpose of this effort is to identify, assess, and rapidly procure portable electronic conspicuity devices that broadcast on 978 MHz Universal Access Transceiver (UAT) while providing the appropriate levels of anonymity needed for sensitive missions conducted by low-flying military aircraft. This effort aligns with the Department of War's (DoW) strategic objective of ensuring safe airspace integration while maintaining operational security. Through this Call, the Government ensures that industry remains informed of its changing needs, fostering ongoing investment and innovation in electronic conspicuity technologies. All viable responses will be considered for follow-on capability demonstrations and potential procurement based on specific mission requirements and the availability of funds.
72%
Solicitation07/10/2026
ACC-RSA, in conjunction with PM-UAS, is proud to announce the release of the Platoon Level Small Uncrewed Aircraft System (SUAS) Call for Solutions (C4S) under the Uncrewed Aircraft Systems (UAS) Marketplace Commercial Solution Opening (CSO) W58RGZ-26-S-C001. This Call will competitively acquire and/or onboard innovative commercial, Vertical Take-off and Landing (VTOL) Uncrewed Aircraft Systems (UAS) in the Platoon Level SUAS classification. The Government reserves the right to alter or cancel this call at any time. The purpose of this effort is to increase current capabilities in the field, advance the Army’s requirements and accelerate the integration of cutting-edge SUAS technologies while driving cost efficiencies. This effort aligns with the Department of War's (DoW) strategic objective of achieving Drone Dominance. Through this Call, the Army ensures that industry remains informed of its changing needs, fostering ongoing investment and innovation in sUAS technologies to address future opportunities. Please read the Call and the Attachments, in their entirety, for detailed submission information.
72%
Solicitation05/15/2026
ACC-RSA, in conjunction with PM-UAS, is proud to announce the release of the final Group 1 and 2 UAS and LE Call for Solutions (C4S) under the Uncrewed Aircraft Systems (UAS) Marketplace Commercial Solution Opening (CSO) W58RGZ-26-S-C001. Please read the attachments for the Call for Solutions (C4S) and Statement of Objectives (SOO) detailed information.
72%
Solicitation04/18/2026
Issuing Agency: Project Management Office (PMO) Uncrewed Aircraft Systems (UAS) Capability Program Executive, Aviation SFAE-AVN-U Agencies Capable of Issuing Contracts/Agreements: Army Contracting Command - Redstone Period of Availability: This UAS Marketplace Commercial Solutions Opening, open solicitation, will remain open in perpetuity until canceled by the U.S. Army. Call for Solutions will specify individual response times and requirements. Description of Program: In accordance with Executive Order 14307, the UAS Marketplace is the strategy to scale the industrial base and accelerate production deliveries while empowering Soldiers with freedom of choice to meet mission needs. As part of this approach, the PMO UAS will better incentivize industry innovation. UAS Marketplace marks a significant pivot from traditional Department of War (DoW) acquisition business models to a free-market approach founded on the concept of continuous competition that drives innovation, where Soldiers’ demands are directly linked to industry provided capabilities. This CSO will enable the Army to rapidly acquire and deliver innovative solutions to the Warfighter using commercial technology. SECTION A – INTRODUCTION AND AUTHORITY The PMO UAS has identified the following needs: (1) to accelerate the adoption of advanced commercial technology; (2) to transform UAS capabilities; and (3) to grow the industrial base to appropriately support the DoW. This solicitation aims to provide the DoW with access to innovative solutions enabling the DoW to evolve quickly and maintain a competitive edge over adversaries. Industry is at the forefront of innovation, developing cutting-edge capabilities that will enhance the DoW capabilities and protect the Warfighter. The DoW will select vendors whose solutions demonstrate the greatest potential to achieve the DoW's missions. The PMO UAS is maximizing existing authorities by publishing this CSO, open solicitation, combining any single authority or a combination of the authorities below: Federal Acquisition Regulation (FAR) 6.102(d)(2) – Other Competitive Procedures 10 U.S.C. §3458 – Authority to acquire innovative commercial products and commercial services using general solicitation competitive procedures / DFARS 212.70 – Defense Commercial Solutions Opening SECTION B - GENERAL INFORMATION The PMO UAS anticipates that the CSO will be updated frequently to improve processes and to keep pace with evolving threats, needs and innovations. The CSO will be open in perpetuity until canceled by the PMO UAS. Companies are informed that ONLY a warranted Government Contracting/Agreements Officer (KO/AO) (not a Contracting Officer Representative or other personnel) may contractually bind the Government. The Government shall not be liable to pay for work performed by a company unless a warranted KO/AO has signed an agreement in writing stating that the Government shall pay. The Government shall not fund preparation of solution briefs/proposals, or support work efforts or tasks that are inferred from discussions with technical project officers. SECTION C – AREAS OF INTEREST This CSO, open solicitation, covers any of the following example areas. These example areas shall be viewed as suggestive, rather than limiting, and are not reflective of the ONLY DoW areas or in any priority of order. Intelligence, Electronic, Warfare, and Sensors Tactical Communications Soldier Equipment Ancillary Items Simulation and Stimulation Training and Instrumentation Uncrewed Aircraft Systems: Full Systems Air Vehicles Payloads Supply Chain and Logistics Installation Support and Innovation Additive Manufacturing Autonomous Vehicles Software Autonomous Behaviors Command & Control Launched Effects UAS Production (build at scale) SECTION D – COMMERCIAL SOLUTIONS OPENING (CSO) PROCEDURES There are two methods for responding under this CSO: (1) Innovative Warfighter Solutions submissions and (2) Call for Solution submissions. Method 1 - Innovative Warfighter Solutions (IWS) a. Provides a flexible and open-ended opportunity for industry partners to submit solution briefs to any Areas of Interest (AOI) in Section C. This aspect of the CSO is designed to identify and bridge gaps in mission-critical capabilities by inviting innovative solutions from the private sector. The purpose is to encourage a wide range of responses that can enhance and support the example AOIs, foster collaboration and leverage cutting-edge technologies and methodologies to meet evolving operational needs. b. Companies shall follow the procedures outlined in Section D.1 providing a submission to an IWS. c. The submission mailbox for AOI is identified in Section J. Method 2 - Call for Solutions (C4S) a. Provides an opportunity for industry partners to submit innovative solutions in response to Government issued C4S under any AOI in Section C. C4S aim to pinpoint and address critical gaps in essential capabilities by welcoming creative proposals from private sector entities. b.Companies shall follow the procedures outlined below in Section D.2. c.The individual C4S will identify how responses are to be submitted. Method 1 - IWS Overview Companies submitting an IWS in response to the AOIs shall follow the procedures outlined with each call. If the Government does not select a company’s submission for immediate review, the submission will be retained in the Solution Basket. This allows the Government to reconsider the submission for future needs and funding opportunities, maximizing its value to both the vendor and the DoW. The IWS award procedures will utilize up to three (3) phases, as appliable: Solution Brief Live Demonstration and/or Pitch (optional) Commercial Solution Proposal (CSP) Method 2 - C4S Overview CS4 (referred to as “Calls”) will be released and posted via SAM.gov as an amendment under this CSO. The Call will include all relevant submission requirements and evaluation procedures and shall govern the process for evaluations and award. Submission requirements may vary in phases and may take the form of solution briefs, white papers, demonstrations, live pitches, etc. C4S are independent from the IWS procedures discussed above in Section D.1 IWS procedures do not apply to individual Calls. Calls may be written in a broad manner to maximize efficiency, innovation and application when approaching a problem and to allow for maximum participation from vendors who may not be familiar with submitting proposals to Government solicitations. The Government may post Calls at any time. Interested companies are encouraged to frequently check SAM.gov for updates to this solicitation and posted C4S. SECTION E - AWARDS The Government may choose to issue an award(s) in accordance with IWSs or C4S procedures and subject to the availability of funds. The KO/AO reserves the right to negotiate directly with the company on terms and conditions prior to execution of the resulting award instrument, including payment terms, and will execute the instrument on behalf of the Government. All payment obligations of the Government shall be subject to receipt of appropriations from Congress for the purpose, time, and amount of the obligation. Be advised, only a KO/AO has the authority to enter into, or modify, a binding instrument on behalf of the United States Government. Awards issued under this CSO may include, but are not limited to the following award instruments: FAR contracts under FAR Part 12 Commercial Procedures; any fixed price, or fixed price incentive contract type specified under FAR Part 16; and non-FAR agreements such as transaction agreements under 10 U.S.C. 4022 and 10 U.S.C. 4023; for the Army and/or its customers that are directly relevant to enhancing the effectiveness of the AOI identified in Section J. In order to receive an award, the following must be met: a. Companies shall have a Unique Entity Identification (UEI) number and must register in the System for Award Management (SAM) prior to receiving an instrument. If a company does not possess a valid and active SAM registration, companies are advised to commence SAM registration before responding to a Call or IWS. Companies are required to maintain registration in SAM throughout the period of performance of the instrument and during any subsequent follow-on award. b. Companies shall also register in the prescribed Government invoicing system (Wide Area Work Flow: https://wawf.eb.mil/xhtml/unauth/registration/notice.xhtml.) c. Companies shall represent their small business size and status as required in this solicitation. d. Companies shall be determined to be responsible by the KO/AO and must not be suspended or debarred from award by the Federal Government nor be prohibited by Presidential Executive Order and/or law from receiving an award. e. Any actual or potential OCIs shall be identified to KO/AO prior to award. SECTION F – ITERATIVE PROTOTYPING Iterative prototyping is a development methodology where a prototype is created, tested, and refined through multiple cycles, incorporating user feedback and improvements in each iteration, to ensure the final product meets user requirements and expectations effectively. An Other Transaction (OT) for a prototype awarded or an award using 10 U.S.C. 4023 against this open solicitation shall allow for an iterative prototyping process and will be delineated in the award document. An iterative prototyping process will allow the Government to modify, by mutual agreement, the scope of a prototype contract or OT to allow for the adaptation and modification of the technology being prototyped to meet additional unique and discrete purposes/mission sets. The sequential prototype iterations may result in separate phased prototype awards rather than a modification of the original prototype award. These additional unique and discrete purposes/mission sets can be generated by the Government. SECTION I – NON-GOVERNMENT ADVISORS Non-Government advisors may be used in the evaluation of Solution Briefs, Pitches and during the Commercial Solution Proposal phase and negotiations under the IWS procedures or in C4S. Non-Government advisors will have signed non-disclosure agreements (NDAs) with the Government. The company understands that the Government may share proprietary company information with non-Government personnel for evaluation and administrative purposes only. The Government understands that information provided in response to this open solicitation is presented in confidence and may contain trade secret or commercial or financial information, and it agrees to protect such information from unauthorized disclosure to the maximum extent permitted or required by Law, to include: a. 18 U.S.C. 1905 (Trade Secrets Act); b. 18 U.S.C. 1831 et seq. (Economic Espionage Act); c. 5 U.S.C. 552(b)(4) (Freedom of Information Act); d. Executive Order 12600 (Pre-disclosure Notification Procedures for Confidential Commercial Information); and, e. Any other statute, regulation, or requirement applicable to Government employees. Companies shall label any information they want protected as confidential. Submissions will not be returned. The original copy of each submission received will be retained by the Army and all other non-required copies destroyed. SECTION J - CONTACT INFORMATION IWS Solution Brief submissions as detailed in Section D.1, shall be submitted to the email address listed below and shall include the associated AOI in the subject line of the e-mail. If the respondent does not include the AOI in the subject line of the e-mail, the submission will NOT be reviewed. [Area of Interest in Subject Line][ UASMarketplaceIWS@army.mil ] C4S Brief submissions (Section D.2) shall be submitted in accordance with the instructions and points of contact provided in the Call. General questions surrounding this open solicitation shall be submitted to: Email address: UASMarketplaceIWS@army.mil Cc: USARMY Redstone Arsenal ACC Mailbox ACC-RSA-UAS-Marketplace usarmy.redstone.acc.mbx.acc-rsa-uas-marketplace@army.mil SECTION K - DEFINITIONS "Call for Solution" (C4S) an announcement posted on SAM.gov, which may result in a contract or OT and includes submission instructions, evaluation criteria, timelines, how the Army will treat late submissions, points of contact, and other specific information. The Call is a request for response from prospective industry partners. “Commercial Solutions Opening” (CSO) is a competitive procedure KO/AO may use to acquire innovative commercial items, technologies, or services. “Innovative” means any item that is (1) Any technology, process, or method, including research and development, that is new as of the date of submission of a proposal; or (2) Any application that is new as of the date of submission of a proposal of a technology, process, or method existing as of such date. “Innovative Warfighter Solutions” (IWS) is a competitive procedure for submitting an Innovative Warfighter Solution in response to a posted Area of Interest (AOI) under this Commercial Solutions Opening (CSO). These procedures create a pathway we call the Solution Basket. The IWS gives industry the opportunity to approach the Government with their innovative solutions. “Nontraditional Defense Contractor” is defined by DFARS 202.101 as an “entity that is not currently performing and has not performed any contract or subcontract for DoD that is subject to full coverage under the cost accounting standards prescribed pursuant to 41 U.S.C. 1502 and the regulations implementing such section, for at least the 1-year period preceding the solicitation of sources by DoD for the procurement (10 U.S.C. 3014).” “Nonprofit Institution” is defined in 15 U.S.C. § 3703 an organization owned and operated exclusively for scientific or educational purposes, no part of the net earnings of which insures to the benefit of any private shareholder or individual. "Other Transaction" refers to the statutory authority to enter into transactions other than procurement contracts, grants, or cooperative agreements. The DoD has the authority to enter into OTs for Research Projects (10 USC 4021), OT for Prototype Projects (10 USC 4022), and DoD relevant OT that support research (10 U.S.C. 4021). “Commercial Solution Proposal” (CSP): is a proposal that is submitted in response to a Call that is governed by a CSO or a response to an unsolicited proposal that is invited to Phase III. CSPs may be requested as a result of Solution Briefs and/or presentations/pitches. “Small Business” is defined under Section 3 of the Small Business Act (15 U.S.C. 632).
72%
Solicitation03/11/2031

Additional Details

Solicitation Number

PANORL-26-P-0000-026878

Archive Date

Jul 28, 2027

Office Address

ORLANDO, FL, 32826-3224