GovChime
Notice ID: 15a23bb87a53425797e8b8515071f61dSources SoughtArchived

Procurement of Spare UC-35B Engine (Pratt & Whitney Canada PW535A)

Archived on August 28, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
4:00 PM CDT
Posted
July 29, 2026
Notice type
Sources Sought
Set-aside
No Set aside used
NAICS
336412: Aircraft Engine and Engine Parts Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W6QK ACC-RSA
Place of performance
Redstone Arsenal, 35898
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
PANRSA-26-P-0000-039735
Notice ID
15a23bb87a53425797e8b8515071f61d

Description

Request for Information (RFI) General Information Classification Code: 28 - Engines, Turbines, and Components North American Classification Standards (NAICS) Code: 336412 Subject: Procurement of Spare UC-35B Engine (Pratt & Whitney Canada PW535A) Agency: Department of the Army Office: Project Manager Fixed Wing (PM FW) Contracting Office Address: U.S. Army Contracting Command-Redstone Fixed Wing-Division B (CCAM-ARB) Building 5308 Martin Road Redstone Arsenal, AL 35898-5000 SECTION 1: DISCLAIMER & NOTICE TO VENDORS (Introduction) This is a Request for Information (RFI) only. This does not constitute a Request for Quote (RFQ), Request for Proposal (RFP), or Invitation for Bid (IFB), nor does it obligate the Government to acquire any products or services. No contract will be awarded as a result of this announcement. The Government will not pay for any information, documents, or materials submitted in response to this RFI, and all costs associated with responding will be solely at the interested party's expense. Information provided herein is subject to change and in no way binds the Government to a future solicitation. Unsolicited proposals will not receive a response. This notice does not constitute a commitment by the United States Government to contract for any supply or service whatsoever. All information submitted in response to this announcement is voluntary; the United States Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the United States Government. Not responding to this RFI does not preclude participation in any future RFP, if any is issued. Overview Project Manager Fixed Wing (PM FW) has a requirement to procure a spare UC-35B Engine to ensure aircraft are available to meet mission requirements and prevent unnecessary aircraft groundings, especially during scheduled and unscheduled engine overhaul occurrences. Since 2020, maintaining the availability of the Pratt & Whitney Canada PW535A turbofan engines necessary to minimize aircraft downtime on the Army Fixed Wing Fleet has been extremely difficult, primarily due to lengthy overhaul and repair times combined with a scarcity of available rental engines on the commercial market. Requirement/Objective The Government is seeking information from industry regarding the procurement of a new Pratt & Whitney Canada PW535A turbofan engine. Note: The Government currently assesses the PW535A Engine is the only engine compatible with the Army UC-35B aircraft, and Pratt & Whitney is the only vendor able to manufacture the new engines. However, the purpose of this RFI is to gather market intelligence, determine commercial lead times, and identify any authorized resellers or alternative sources capable of meeting this exact requirement. Information Requested Interested parties should provide a capability statement and responses to the following: Corporate Information Company Name and Address Point of Contact (Name, Title, Phone, Email) CAGE Code and Unique Entity ID (UEI) Business Size and Socio-Economic Status (e.g., Small Business, SDVOSB, WOSB, etc.) under the applicable NAICS code. Technical and Logistics Are you the Original Equipment Manufacturer (OEM) or an authorized reseller/distributor of the Pratt & Whitney Canada PW535A turbofan engine? If a reseller, please provide proof of authorization. What is the estimated lead time for delivery of a new PW535A engine from the date of contract award? What are the standard commercial warranty terms provided with a new engine? MARKET PRICING & FEASIBILITY INFORMATION (Pricing) To assist the Government in its market research, acquisition planning, and budgeting, respondents are requested to provide non-binding pricing inputs. Please submit pricing information utilizing one or more of the following formats: Rough Order of Magnitude (ROM): Provide a high-level, non-binding ROM estimate for the commercial solution described in this RFI. Where possible, please break this estimate down by major components (e.g., software/product licensing, initial setup/implementation, training, and annual maintenance/support). Standard Commercial Price Lists: If the requested items or services are standard commercial offerings, please provide your current commercial price list, along with any standard discounts typically offered to federal or corporate customers. GSA Schedule or Federal Contract Pricing: If these products or services are available under an active GSA Federal Supply Schedule (FSS), NASA SEWP, or other Government-Wide Acquisition Contracts (GWACs), please provide the active contract number, applicable Special Item Numbers (SINs), and your GSA-negotiated rate schedule. Submission Instructions/Response Requirements Responses to this RFI shall be submitted in writing and shall be Microsoft Word or Adobe Acrobat Reader. Please keep responses concise and directly address the information requested in the section above. Font size shall not be smaller than 12-point Times New Roman, Arial, or Aptos. Corresponding responses should be no more than 10 written pages. Respondents should label any information contained in the response that is considered proprietary. Deadline for Submissions: 15 days from the date of the posting of this RFI Method of Submission: Responses must be submitted via email to Mark Carlson, mark.e.carlson.civ@army.mil, or Jack Wegman, jack.a.wegman.civ@army.mil. Format: Microsoft Word or Adobe PDF format.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

No documents available.

Lifecycle

  1. 3
    Version 3Sources SoughtArchivedCurrent

    Procurement of Spare UC-35B Engine (Pratt & Whitney Canada PW535A)

    Notice 15a23bb87a53425797e8b8515071f61d on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
FPV Tools and Spares Kit
56%
Combined Synopsis12/24/2025
SOURCES SOUGHT W58RGZ-27-B-A008 UH-60 Starter, Engine Hydraulic OVERHAUL INTRODUCTION The U.S. Army Contracting Command-Redstone Arsenal (W58RGZ-27-B-A008) ATTN: CCAM-AVA-B, Building 5303, Martin Road Redstone Arsenal, AL 35898-5280 (US) is issuing this Sources Sought as a means of conducting market research to identify potential sources having an interest and industry technologies available to support/provide inspection and overhaul of the Starter, Engine Hydraulic, Input/ Output NSN 2995-01-079-9316, Part number: 70651-03210-101. The result of this market research will contribute to determining the method of procurement if a requirement materializes. Based on the responses to this Sources Sought notice/market research, this requirement may be set aside for small businesses (in full or in part) or procured through full and open competition. Multiple awards may be made. All small business set-aside categories will be considered. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding submissions. DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. REQUIRED CAPABILITIES The Government requires that contractors be able to provide all services, facilities, labor, parts, materials, equipment, tools, and data necessary to accomplish the inspection and overhaul for the Starter, Engine Hydraulic, Input/Output NSN 2995-01-079-9316, Part number 70651-03210-101 and to return the items to condition code A as defined by Army Regulation 725-50. Upon completion of the overhaul, the items shall be packaged and shipped to the required destination(s). The Starter, Engine Hydraulic, is a non- Critical Safety Item. A DMWR is available. SPECIAL REQUIREMENTS The Government requires that contractors have a plan to meet all the Government’s special tooling and test equipment requirements with either: 1. Physical possession of the required tools, 2. Confirmed requisitions for the required tools, 3. Confirmed arrangements for subcontracting the processes requiring the special tools, or 4. Specific plans describing their technical approach to develop equivalent tools. 5. The special equipment includes the following: Installation & Removal Tool (P/N RF9812DW), Installation & Removal Tool (P/N RF9816DW) Lockring Removal Tool (P/N RF9812LPD) Lockring Removal Tool (P/N RF9816LPD) Fixture, Removal, Bearing (P/N T-180570) Adapter, Power Arm (P/N T-181246) Shield, Valve Face (P/N T-210297) Tongs (P/N T-215351) Plate, Bearing Removal (P/N T-228563) Plate, Bearing Removal (P/N T-232286) Fixture, Assembly (P/N T-232794) Guide, Locator, Pin (P/N T-232860) Ring, Split (P/N T-232863) Driver (P/N T-232865) Adapter, Drive (P/N T-237011) Driver (P/N T-237013) Rod, Guide Motor Hyd (P/N T-237121) Adapter, Bearing (P/N T-237776) Fixture, Holding (P/N T-237778) Ring, Retaining (P/N T-300325) Ring, Bearing Retaining (P/N T-300327) Driver, Bearing, Motor (P/N T-300326) Ring (P/N T-300328) Plate, Bearing Removal (P/N T-300329) Fixture, Holding (P/N T-300330) Driver, Shaft, Motor (P/N T-300331) Mandrel, Loading Mot (P/N T-300332) Driver, Shaft Seal (P/N T-300661) Guide (P/N T-500964) Driver (P/N T-500965) Fixture, Holding (P/N TES-7734) Fixture, Holding, Hyd (P/N TES-7830) Positioner, Mechanical (P/N Model 301) Fixture, Aircraft Maintenance (P/N T-246396) Assembly Tool (P/N 93059-T) Gage, Ring (P/N T-400983) Gage, Ring, Plain (P/N T-400982) Spindle, Air Gage (P/N T-400981) Slot Gauge (P/N T-232741) Tool, Alignment, Fixture (P/N T-246993) Fixture Assembly, Mo (2 required) (P/N TES-7736) 6. Identify special processes, test procedures, and/or instructions Examination of Product, External Leakage, Break-In Run: WP 0016 Inlet Proof Pressure Test: WP 0017 Outlet and Case Proof Pressure Test: WP 0018 Overrunning Speed Test: WP 0019 Anti-Cavitation Test: WP 0020 High Speed Cylinder Block Lift Test: WP 0021 Low-Speed Cylinder Block Lift Test: WP 0022 Performance Test: WP 0023 ELIGIBILITY The applicable NAICS code for this requirement is 336412 with a Small Business Size Standard of 1500 employees. The Product Service Code (PSC) is 2995. The DMWR for this requirement is DMWR 1-2995-235. SUBMISSION DETAILS Interested businesses should submit a brief capabilities statement package (no more than ten 8.5 X 11- i n c h pages, font no smaller than 10 point) demonstrating ability to provide the products/systems listed in this Technical Description. Documentation should be in bullet format. No phone or email solicitations with regards to the status of the RFP will be accepted prior to its release. Your response to this Sources Sought, including any capabilities statement, shall be electronically submitted to the Contract Specialist, Brenda Nelson in either Microsoft Word or Portable Document Format (PDF), via email Brenda.nelson.civ@army.mil no later than 5:00 p.m. Central Time on 12 November 2026 and reference the solicitation number in the subject line of the e-mail and on all enclosed documents. Information and materials submitted in response to this request WILL NOT be returned. DO NOT SUBMIT CLASSIFIED MATERIAL. If your organization has the potential capacity to provide the required products/systems, please provide the following information: 1) Organization name, address, primary points of contact (POCs) and their email address, Web site address, telephone number, and type of ownership for the organization; and 2) Tailored capability statements addressing the requirements of this notice, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government.
53%
Pre-Solicitation11/12/2026
Issuing Agency: Project Management Office (PMO) Uncrewed Aircraft Systems Capability Program Executive, Aviation SFAE-AVN-U Agencies Capable of Issuing Contracts/Agreements: Army Contracting Command - Redstone Period of Availability: This Department of War (DoW) Drone Commercial Solutions Opening, open solicitation, will remain open in perpetuity until canceled. Call for Solutions will specify individual response times and requirements. Description of Program: In accordance with Executive Order 14307, the DoW Drone Marketplace is the strategy to scale the industrial base and accelerate production deliveries while empowering Soldiers with freedom of choice to meet mission needs. As part of this approach, the DoW will better incentivize industry innovation. DoW Drone Marketplace marks a significant pivot from traditional DoW acquisition business models to a free-market approach founded on the concept of continuous competition that drives innovation, where Soldiers’ demands are directly linked to industry provided capabilities. This CSO will enable the DoW to rapidly acquire and deliver innovative solutions to the Warfighter using commercial technology. SECTION A – INTRODUCTION AND AUTHORITY The DoW has identified the following needs: (1) to accelerate the adoption of advanced commercial technology; (2) to transform DoW Drone Marketplace capabilities; and (3) to grow the industrial base to appropriately support the DoW. This solicitation aims to provide the DoW with access to innovative solutions enabling the DoW to evolve quickly and maintain a competitive edge over adversaries. Industry is at the forefront of innovation, developing cutting-edge capabilities that will enhance the DoW capabilities and protect the Warfighter. The DoW will select vendors whose solutions demonstrate the greatest potential to achieve the DoW's missions. The DoW is maximizing existing authorities by publishing this CSO, open solicitation, combining any single authority or a combination of the authorities below: Federal Acquisition Regulation (FAR) 6.102(d)(2) – Other Competitive Procedures 10 U.S.C. §3458 – Authority to acquire innovative commercial products and commercial services using general solicitation competitive procedures / DFARS 212.70 – Defense Commercial Solutions Opening SECTION B - GENERAL INFORMATION The DoW anticipates that the CSO will be updated frequently to improve processes and to keep pace with evolving threats, needs and innovations. The CSO will be open in perpetuity until canceled bythe DoW. Companies are informed that ONLY a warranted Government Contracting/Agreements Officer (KO/AO) (not a Contracting Officer Representative or other personnel) may contractually bind the Government. The Government shall not be liable to pay for work performed by a company unless a warranted KO/AO has signed an agreement in writing stating that the Government shall pay. The Government shall not fund preparation of solution briefs/proposals, or support work efforts or tasks that are inferred from discussions with technical project officers. SECTION C – AREAS OF INTEREST (AOI) This CSO, open solicitation, covers any of the following example areas. These example areas shall be viewed as suggestive, rather than limiting, and are not reflective of the ONLY AOIs or in any priority of order. Intelligence, Electronic, Warfare, and Sensors Tactical Communications Soldier Equipment Ancillary Items Payloads Simulation and Stimulation Training and Instrumentation Unmanned Aircraft Systems (UAS): Full Systems Air Vehicles Maritime Systems: Surface and Undersea Systems Maritime Reconnaissance and Domain Awareness Littoral and Amphibious Support Ground Systems: Reconnaissance and Surveillance Systems Logistics and Equipment Transport Combat and Tactical Support Platforms Counter- UAS: Mutli-Domain Sensing and Detection Command, Control and Data Fusion Defeat Mechanisms (Kinetic and Non-Kinetic) Platform & Operation Integration Supply Chain and Logistics Installation Support and Innovation Additive Manufacturing Autonomous Vehicles Software Autonomous Behaviors Command & Control Launched Effects Drone Production (build at scale) SECTION D – COMMERCIAL SOLUTIONS OPENING (CSO) PROCEDURES There are two methods for responding under this CSO: (1) Innovative Warfighter Solutions submissions and (2) Call for Solution submissions. Method 1 - Innovative Warfighter Solutions (IWS) Provides a flexible and open-ended opportunity for industry partners to submit solution briefs to any AOI in Section C. This aspect of the CSO is designed to identify and bridge gaps in mission-critical capabilities by inviting innovative solutions from the private sector. The purpose is to encourage a wide range of responses that can enhance and support the example AOIs, foster collaboration and leverage cutting-edge technologies and methodologies to meet evolving operational needs. Companies shall follow the procedures outlined in the attachment when providing a submission to an IWS. The submission mailbox for AOI is identified in Section J. Method 2 - Call for Solutions (C4S) Provides an opportunity for industry partners to submit innovative solutions in response to Government issued C4S under any AOI in Section C. C4S aim to pinpoint and address critical gaps in essential capabilities by welcoming creative proposals from private sector entities. Companies shall follow the procedures outlined below and within the specific C4Ss posted. The individual C4S will identify how responses are to be submitted. Method 1 - IWS Overview Companies submitting an IWS in response to the AOIs shall follow the procedures outlined in the attachment. If the Government does not select a company’s submission for, as applicable, for phase 2 and/or 3, the submission may be retained in the Solution Basket. This allows the Government to reconsider the submission for future needs and funding opportunities, maximizing its value to both the vendor and the DoW. The IWS award procedures will utilize up to three (3) phases, as appliable: Solution Brief Live Demonstration and/or Pitch (optional) Commercial Solution Proposal (CSP) Method 2 - C4S Overview CS4 (referred to as “Calls”) will be released and posted via SAM.gov as an amendment under this CSO. The Call will include all relevant submission requirements and evaluation procedures and shall govern the process for evaluations and award. Submission requirements may vary in phases and may take the form of solution briefs, white papers, demonstrations, live pitches, etc. C4S are independent from the IWS procedures discussed above in Section D.1 IWS procedures do not apply to individual Calls. Calls may be written in a broad manner to maximize efficiency, innovation and application when approaching a problem and to allow for maximum participation from vendors who may not be familiar with submitting proposals to Government solicitations. The Government may post Calls at any time. Interested companies are encouraged to frequently check SAM.gov for updates to this solicitation and posted C4S. SECTION E - AWARDS The Government may choose to issue an award(s) in accordance with IWSs or C4S procedures and subject to the availability of funds. The KO/AO reserves the right to negotiate directly with the company on terms and conditions prior to execution of the resulting award instrument, including payment terms, and will execute the instrument on behalf of the Government. All payment obligations of the Government shall be subject to receipt of appropriations from Congress for the purpose, time, and amount of the obligation. Be advised, only a KO/AO has the authority to enter into, or modify, a binding instrument on behalf of the United States Government. Awards issued under this CSO may include, but are not limited to the following award instruments: FAR contracts under FAR Part 12 Commercial Procedures; any fixed price, or fixed price incentive contract type specified under FAR Part 16; and non-FAR agreements such as transaction agreements under 10 U.S.C. 4022 and 10 U.S.C. 4023; for the DoW and/or its customers that are directly relevant to enhancing the effectiveness of the AOI identified in Section J. In order to receive an award, the following must be met: Companies shall have a Unique Entity Identification (UEI) number and must register in the System for Award Management (SAM) prior to receiving an instrument. If a company does not possess a valid and active SAM registration, companies are advised to commence SAM registration before responding to a Call or IWS. Companies are required to maintain registration in SAM throughout the period of performance of the instrument and during any subsequent follow-on award. Companies shall also register in the prescribed Government invoicing system (Wide Area Work Flow: https://wawf.eb.mil/xhtml/unauth/registration/notice.xhtml.) Companies shall represent their small business size and status as required in this solicitation. Companies shall be determined to be responsible by the KO/AO and must not be suspended or debarred from award by the Federal Government nor be prohibited by Presidential Executive Order and/or law from receiving an award. Any actual or potential OCIs shall be identified to KO/AO prior to award. SECTION F – ITERATIVE PROTOTYPING Iterative prototyping is a development methodology where a prototype is created, tested, and refined through multiple cycles, incorporating user feedback and improvements in each iteration, to ensure the final product meets user requirements and expectations effectively. An Other Transaction (OT) for a prototype awarded or an award using 10 U.S.C. 4023 against this open solicitation shall allow for an iterative prototyping process and will be delineated in the award document. An iterative prototyping process will allow the Government to modify, by mutual agreement, the scope of a prototype contract or OT to allow for the adaptation and modification of the technology being prototyped to meet additional unique and discrete purposes/mission sets. The sequential prototype iterations may result in separate phased prototype awards rather than a modification of the original prototype award. These additional unique and discrete purposes/mission sets can be generated by the Government. SECTION I – NON-GOVERNMENT ADVISORS Non-Government advisors may be used in the evaluation of Solution Briefs, Pitches and during the Commercial Solution Proposal phase and negotiations under the IWS procedures or in C4S. Non-Government advisors will have signed non-disclosure agreements (NDAs) with the Government. The company understands that the Government may share proprietary company information with non-Government personnel for evaluation and administrative purposes only. The Government understands that information provided in response to this open solicitation is presented in confidence and may contain trade secret or commercial or financial information, and it agrees to protect such information from unauthorized disclosure to the maximum extent permitted or required by Law, to include: 18 U.S.C. 1905 (Trade Secrets Act); 18 U.S.C. 1831 et seq. (Economic Espionage Act); 5 U.S.C. 552(b)(4) (Freedom of Information Act); Executive Order 12600 (Pre-disclosure Notification Procedures for Confidential Commercial Information); and, Any other statute, regulation, or requirement applicable to Government employees. Companies shall label any information they want protected as confidential. Submissions will not be returned. The original copy of each submission received will be retained by the DoW and all other non-required copies destroyed. SECTION J - CONTACT INFORMATION IWS Solution Brief submissions as detailed in Section D, shall be submitted to the email address listed below and shall include the associated AOI in the subject line of the e-mail. If the respondent does not include the AOI in the subject line of the e-mail, the submission will NOT be reviewed. Area of Interest in Subject Line usarmy.redstone.cpe-avn.mbx.uasmarketplaceiws@army.mil C4S Brief submissions (Section D) shall be submitted in accordance with the instructions and points of contact provided in the Call. General questions surrounding this open solicitation shall be submitted to: Email address: USARMY Redstone Arsenal PEO AVN Mailbox DoW Drone Marketplace <usarmy.redstone.peo-avn.mbx.uas-marketplace@army.mil> SECTION K - DEFINITIONS "Call for Solution" (C4S) an announcement posted on SAM.gov, which may result in a contract or OT and includes submission instructions, evaluation criteria, timelines, how the DoW will treat late submissions, points of contact, and other specific information. The Call is a request for response from prospective industry partners. “Commercial Solutions Opening” (CSO) is a competitive procedure KO/AO may use to acquire innovative commercial items, technologies, or services. “Innovative” means any item that is (1) Any technology, process, or method, including research and development, that is new as of the date of submission of a proposal; or (2) Any application that is new as of the date of submission of a proposal of a technology, process, or method existing as of such date. “Innovative Warfighter Solutions” (IWS) is a competitive procedure for submitting an Innovative Warfighter Solution in response to a posted Area of Interest (AOI) under this Commercial Solutions Opening (CSO). These procedures create a pathway we call the Solution Basket. The IWS gives industry the opportunity to approach the Government with their innovative solutions. “Nontraditional Defense Contractor” is defined by DFARS 202.101 as an “entity that is not currently performing and has not performed any contract or subcontract for DoW that is subject to full coverage under the cost accounting standards prescribed pursuant to 41 U.S.C. 1502 and the regulations implementing such section, for at least the 1-year period preceding the solicitation of sources by DoW for the procurement (10 U.S.C. 3014).” “Nonprofit Institution” is defined in 15 U.S.C. § 3703 an organization owned and operated exclusively for scientific or educational purposes, no part of the net earnings of which insures to the benefit of any private shareholder or individual. "Other Transaction" refers to the statutory authority to enter into transactions other than procurement contracts, grants, or cooperative agreements. The DoW has the authority to enter into OTs for Research Projects (10 USC 4021), OT for Prototype Projects (10 USC 4022), and DoW relevant OT that support research (10 U.S.C. 4021). “Commercial Solution Proposal” (CSP): is a proposal that is submitted in response to a Call that is governed by a CSO or a response to an unsolicited proposal that is invited to Phase III. CSPs may be requested as a result of Solution Briefs and/or presentations/pitches. “Small Business” is defined under Section 3 of the Small Business Act (15 U.S.C. 632).
52%
Solicitation03/11/2031
Request for Information (RFI) Intent of the Notice: Army Contracting Command - Orlando (ACC-Orlando), for the U.S. Army Capability Program Executive Simulation, Training, Test and Threats (CPE ST3), in support of Product Manager Tactical Training Systems (PdM TTS), is conducting market research to determine whether responsible industry sources exist that can provide uninterrupted Aerial Remotely Piloted Vehicle Target (ARPVT) systems (Group 2 and 3) and services support without substantial duplication of cost to the Government or unacceptable delays in fulfilling agency requirements. The Government is considering the most effective acquisition approach for continued ARPVT support, which may include an extension of the current Griffon Aerospace Inc. for up to five years for the ADA-T II contract, W900KK-22-D-0010. This RFI is issued for market research purposes and to assist the Government in determining whether the requirement should be competed or whether a noncompetitive action may be supportable under Revolutionary Federal Acquisition Regulation (FAR) Overhaul Part 6.103-1(c)(2). This RFI is issued in accordance with DFARS Revolutionary FAR Overhaul PGI 206.103-170. Background: The ADA-T II contract was established to provide manufacturing of aerial targets, support services, related support equipment, mission payload system devices, training, and associated technical and logistics support. The current effort includes support for MQM-170, MQM-171 and MQM-186 aerial target operations and related field services. The Government does not own build-to-print technical data packages (TDP) or software source code for the MQM-170, MQM-171, or MQM-186. Prior market research and acquisition planning associated with ADA-T II Delivery Orders recognized that the pre-existing ADA-T II IDIQ contract vehicle was established to address the technical scope of the effort, and that no readily available commercial solution was identified to meet the requirement without additional integration, qualification, transition, and schedule risk. Brief Description: The Government requires continued ARPVT support to procure, operate, maintain, repair, transport, store, and support aerial target systems and associated equipment in support of live training, test, and evaluation events. The requirement may include, but is not limited to, engineering services, aerial target operations, target system production, depot-level repair and maintenance, mission payload support, field operations services, qualification training, inventory and transfer support, spares, ground support equipment, Government Furnished Property (GFP) accountability, reporting, logistics planning, and event support at CONUS and OCONUS locations as directed by the Government. Purpose of Industry Response: The Government is requesting capability statements from industry to determine whether any source, other than the incumbent contractor, can perform the requirements within the Government’s required schedule while avoiding duplication of cost and transition delays. Responses should provide enough information for the Government to assess technical capability, schedule risk, cost duplication, access to necessary data/equipment, and relevant past performance. The Government will use the information received to support acquisition planning, market research, and determination of whether competition is practicable. Requested Information: 1. Company name, address, CAGE code, Unique Entity ID, point of contact, telephone number, and email address. 2. Socioeconomic status, applicable NAICS code(s), and whether the company intends to perform as a prime contractor, subcontractor, teaming partner, or joint venture. 3. Description of current technical capability to support MQM-170, MQM-171, and MQM-186 (or equivalent based on attached performance requirements) aerial target operations and any other ADA-T II target systems, including production, maintenance, field operations, launch/recovery, mission payload integration, and event support. If your firm does not possess the proprietary TDP, explain your strategy to reverse-engineer or develop equivalent systems, including estimated timelines for airworthiness certification. 4. Evidence of access to technical data, software, tooling, configuration information, support equipment, qualified personnel, safety releases, airworthiness documentation, and supply chain needed to perform without Government-funded requalification or extensive transition. 5. Specific transition plan and timeline to assume full performance with zero degradation to the operational tempo or support to scheduled training, test, and operational events. Identify any Government actions, data, GFP, facilities, or lead times required. 6. Identification of the estimated Non-Recurring Engineering (NRE), start-up, and transition costs your firm would require to assume full performance and delivery of the ADA-T II requirement. This should include, but is not limited to, estimated costs and timelines for tooling, support equipment, First Article Testing (FAT), airworthiness/safety certifications, range integration, software development/integration, and program management start-up. (Note: The Government will utilize this data to internally assess potential duplication of costs and schedule impacts). 7. Description of relevant past performance within the last five (5) years for aerial target manufacturing, unmanned aerial system target operations, range support, mission payload support, and field services for DoD customers. 8. Identification of any commercial products, commercial services, or non-developmental items that could meet all or part of the requirement, including modifications required and estimated schedule to reach operational readiness. 9. Risks, assumptions, constraints, proprietary restrictions, licensing limitations, export control considerations, and data rights issues that may affect performance, schedule, cost, or competition. Specifically address any limitations on the Government's use of technical data or software, and state whether the Government would receive Government Purpose Rights (GPR) for any deliverable. 10. Recommended contract type, ordering approach, and any other information that would assist the Government in determining whether competition is practicable. Responses: Interested sources shall submit written capability statements no later than 28 July 2026. Responses should be limited to 15 pages, excluding cover page, and shall be submitted electronically to Contract Specialist Phuong Hudson V, phuong.v.hudson.civ@army.mil and Procuring Contracting Officer Roberto J. Gotay at roberto.j.gotaygarcia.civ@army.mil. Proprietary information, if any, shall be clearly marked. The Government will not reimburse respondents for any costs associated with preparing or submitting a response. Oral communications are not acceptable in response to this RFI. Government Evaluation of Responses: A determination by the Government not to compete any resulting requirement, based upon responses to this RFI, is solely within the discretion of the Government. Information received will normally be considered solely for acquisition planning and for determining whether competitive procurement is feasible. If responses do not demonstrate that another responsible source can meet the Government’s requirements without substantial duplication of cost or unacceptable delay, the Government may proceed with the appropriate noncompetitive acquisition strategy, subject to required reviews and approvals. Attachments: Attachment 1, RPVT Final Perf Specification Attachment 2, MQM-186 Aerial Target Demonstrated Performance Attachment 3, MQM-171 Demonstrated Performance Disclaimer: This RFI does not constitute an Invitation for Bids (IFB), Request for Proposal (RFP), Request for Quotation (RFQ), or a commitment by the U.S. Government to issue a solicitation or award a contract. The U.S. Government will neither pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the U.S. Government. Additionally, all submissions become government property and will not be returned. Any information submitted by respondents is strictly voluntary.
52%
Market Research07/29/2026
The Government, in support of the Office of the Under Secretary of War for Acquisition and Sustainment (OUSD(A&S)), is issuing this Call for Solutions (C4S) against Commercial Solutions Opening (CSO) W58RGZ-26-S-C001-0004 under the authority of 10 U.S.C. § 3458. This Call will competitively acquire and/or onboard innovative commercial portable electronic conspicuity devices. The Government reserves the right to alter or cancel this call at any time. The Government will not pay for any information or administrative costs incurred in responding to this Call; all preparation and submission costs shall be solely at the interested party's expense. Furthermore, choosing not to respond to this C4S does not preclude participation in any future solicitations or procurement actions. The purpose of this effort is to identify, assess, and rapidly procure portable electronic conspicuity devices that broadcast on 978 MHz Universal Access Transceiver (UAT) while providing the appropriate levels of anonymity needed for sensitive missions conducted by low-flying military aircraft. This effort aligns with the Department of War's (DoW) strategic objective of ensuring safe airspace integration while maintaining operational security. Through this Call, the Government ensures that industry remains informed of its changing needs, fostering ongoing investment and innovation in electronic conspicuity technologies. All viable responses will be considered for follow-on capability demonstrations and potential procurement based on specific mission requirements and the availability of funds.
52%
Solicitation07/10/2026

Additional Details

Solicitation Number

PANRSA-26-P-0000-039735

Archive Date

Aug 28, 2026

Office Address

REDSTONE ARSENAL, AL, 35898-0000