GovChime
Notice ID: fd52a9f3424d46d5a31c9d7b897309baSolicitationArchived

Top Wind Tunnels

Archived on September 23, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM CDT
Posted
September 1, 2026
Notice type
Solicitation
NAICS
334519: Other Measuring and Controlling Device Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.ACC-CTRS.ACC RSA.W6QK ACC-RSA
PSC
6636: ENVIRONMENTAL CHAMBERS AND RELATED EQUIPMENT
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
PANRSA-26-P-0000037538
Notice ID
fd52a9f3424d46d5a31c9d7b897309ba

Description

The U.S. Army TMDE Activity (USATA) has a requirement to purchase of two (2) Wind Tunnels that will be used by USATA Engineers and Technicians to provide OCONUS support to customers owning wind speed measuring devices (hot-wire anemometers). Industrial hygiene and chemical testing facilities are impacted by the increased turn-around time of sending their equipment to the APSL. The Wind Tunnels shall include the following specifications or equivalent (if not brand name):

Requirements:

  • The wind tunnel shall generate air speeds ranging from 1.5 to 50 m/s.
  • Air speed measuring equipment shall be provided and shall have a total measurement uncertainty less than or equal to 0.75% of reading.
  • The wind tunnel test chamber shall have cross sectional dimensions of 4 x 4 inch at minimum, and 12 x 12 inch at maximum.
  • The wind tunnel shall produce turbulence intensity that is less than or equal to 1%.
  • The wind tunnel shall have maximum dimensions of 10 x 3 x 6 feet LWH when assembled. The wind tunnel shall be able to fit through a standard 32-inch width door.
  • The wind tunnel design shall be open circuit if a closed-circuit design is not available within budget.
  • For designs greater than 45 kg, the wind tunnel shall be built on a frame with casters.
  • The wind tunnel’s motor shall not exceed 90 dB when generating speeds of 50 m/s.
  • The wind tunnel’s motor shall be powered on a 220V 16A single phase line.

Support and Accessories

  • The wind tunnel shall be shipped to TMDE Support Center (TSC) Kaiserslautern, Germany and TSC Camp Carroll, South Korea.
  • Measuring equipment requires organic calibration support. Any calibration procedure/software required shall be provided.
  • All software shall not require an annual subscription or online connection. If software does not have a transferable license, a computer shall be provided to operate it.
  • Operating software shall be able to report standard and actual wind speed. It shall also be able to correct for different pressure and temperature conditions.
  • Operating software shall be able to export data from test runs.

Full description on SAM.gov

Award Overview

No prior contract identified

No matching prior contract was found within an 18-month window using the same agency, NAICS, place-of-performance state, and PSC. This may be a new requirement, or the prior award uses a different classification.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (1)

  • Purchase Description (W80RA6-17-26C).docx

    18 KBAdded in Solicitation version 3Posted
    Download

Lifecycle

  1. 3
    Version 3SolicitationArchivedCurrent

    Top Wind Tunnels

    Notice fd52a9f3424d46d5a31c9d7b897309ba on SAM.gov

Similar Opportunities

Title
Phase
Deadline

Additional Details

Solicitation Number

PANRSA-26-P-0000037538

Archive Date

Sep 23, 2026

Place of Performance Country

GERMANY

Office Address

REDSTONE ARSENAL, AL, 35898-5200