Phased Array Tracking to Intercept on Target (PATRIOT) Advanced Capability-3 (PAC-3) Technical Assistance (TA) and Field Service Representative (FSR) Follow-On Program Year 2027-2029
Archived on April 1, 2026. Original response deadline: . Full description on SAM.gov.
Description
This is a sources-sought announcement for informational and planning purposes only and does not constitute a solicitation. The intent of this notice is to conduct market research in accordance with Federal Acquisition Regulation (FAR) Part 10 and is for informational purposes only and to support planning for the requirements listed below. The U.S. Government (USG) will not pay for any information or reimburse any costs incurred in responding to this RFI. No solicitation is being issued currently. All information submitted in response to this announcement is voluntary. Not responding to this RFI does not preclude participation in any future solicitation, if issued. If a solicitation is released, it will be synopsized on SAM.gov. It is the responsibility of the potential offerors to monitor this site for additional information pertaining to this requirement.
This synopsis details the intent of the USG to release a solicitation to provide Technical Assistance (TA) and Field Service Representative (FSR) support for the PAC-3 Defense System and Ground Support Equipment. The contractor will provide technical services necessary to execute the USG and International Partners’ requirements for PAC-3 Cost Reduction Initiative (CRI) and PAC-3 Missile Segment Enhancement (MSE) Missiles and Launcher equipment. The performance period for this effort will commence not later than 1 December 2027. The Government does not possess or have an available Technical Data Package for the maintenance of any of the equipment; for example, PAC-3 missile variants or PAC-3 Launcher Station (LS), test sets or tooling to be maintained under any potential contract. All responsible sources may identify their interest and provide capability statements in response to this notice.
The contractor FSR(s) shall provide system integration support (i.e., installation/checkout of the PAC-3 system hardware and software into the units being fielded). Additionally, the FSR(s) shall be onsite with the fielded units and shall be available as subject matter expert(s) regarding operational questions and the maintenance of both the hardware and software, including software verification. The FSR(s) shall be on call to support the user within 24-48 hours after receiving request for assistance from the user, to diagnose and troubleshoot hardware and software difficulties encountered by the users. The FSR(s) may be required to travel to the equipment at the specified locations, or the equipment may be delivered to the contractor. The contractor shall perform maintenance, repair or supply action required affecting a repair to the fielded hardware. The contractor shall provide required reinforcement training and new equipment training.
Interested firms who believe they can provide the above-mentioned services are invited to indicate their interest by submitting:
1. Company name, company address, overnight delivery address (if different from mailing address, Cage Code, point of contact, e-mail address, telephone number, fax number).
2. Business size (i.e. large, small disadvantaged, veteran owned, woman owned, etc.)
3. Affirmation of cleared personnel and facilities.
4. A description of the company’s expertise in providing Technical Assistance and Field Support Representative support for the PAC-3 Cost RI and MSE Missile and Ground Support Equipment.
5. A description of your company’s technical expertise, capabilities, and assets necessary to provide technical support for the PAC-3 Defense System and associated Ground Support Equipment.
6. A description, in general, of your company’s approach to meeting the required period of performance.
All responses shall be unclassified.
General:
The experience/expertise description should be no longer than 5 pages. Send your response to the Contracting Officer, James Casper, at email james.s.casper3.civ@army.mil, no later than 5:00 p.m. on 17 March 2026. No telephone or facsimile submissions will be accepted. Responses will not be returned nor will be considered by the Government as offers.
Submit any clarifying questions via email to the Contracting Officer, James Casper, at email james.s.casper3.civ@army.mil.
Contracting Office:
Army Contracting Command – Redstone Arsenal, AL
Place of Performance:
Army Contracting Command – Redstone Arsenal, AL
Overview
Award Overview
Possible prior contracts
Sign in to see possible prior contracts for this requirement (matched by agency, NAICS and place of performance; not confirmed).
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
PEO-26-005- Market Research
Pre-solicitation or formal solicitation typically follows within 30–180 days. (estimate)
- Market ResearchCurrentMar 2, 2026
Phased Array Tracking to Intercept on Target (PATRIOT) Advanced Capability-3 (PAC-3) Technical Assistance (TA) and Field Service Representative (FSR) Follow-On Program Year 2027-2029
Similar Opportunities
Title | Phase | Agency | NAICS | Set Aside | Posted | Deadline | Location |
|---|---|---|---|---|---|---|---|
Request for Information (RFI) Intent of the Notice: Army Contracting Command - Orlando (ACC-Orlando), for the U.S. Army Capability Program Executive Simulation, Training, Test and Threats (CPE ST3), in support of Product Manager Tactical Training Systems (PdM TTS), is conducting market research to determine whether responsible industry sources exist that can provide uninterrupted Aerial Remotely Piloted Vehicle Target (ARPVT) systems (Group 2 and 3) and services support without substantial duplication of cost to the Government or unacceptable delays in fulfilling agency requirements. The Government is considering the most effective acquisition approach for continued ARPVT support, which may include an extension of the current Griffon Aerospace Inc. for up to five years for the ADA-T II contract, W900KK-22-D-0010. This RFI is issued for market research purposes and to assist the Government in determining whether the requirement should be competed or whether a noncompetitive action may be supportable under Revolutionary Federal Acquisition Regulation (FAR) Overhaul Part 6.103-1(c)(2). This RFI is issued in accordance with DFARS Revolutionary FAR Overhaul PGI 206.103-170. Background: The ADA-T II contract was established to provide manufacturing of aerial targets, support services, related support equipment, mission payload system devices, training, and associated technical and logistics support. The current effort includes support for MQM-170, MQM-171 and MQM-186 aerial target operations and related field services. The Government does not own build-to-print technical data packages (TDP) or software source code for the MQM-170, MQM-171, or MQM-186. Prior market research and acquisition planning associated with ADA-T II Delivery Orders recognized that the pre-existing ADA-T II IDIQ contract vehicle was established to address the technical scope of the effort, and that no readily available commercial solution was identified to meet the requirement without additional integration, qualification, transition, and schedule risk. Brief Description: The Government requires continued ARPVT support to procure, operate, maintain, repair, transport, store, and support aerial target systems and associated equipment in support of live training, test, and evaluation events. The requirement may include, but is not limited to, engineering services, aerial target operations, target system production, depot-level repair and maintenance, mission payload support, field operations services, qualification training, inventory and transfer support, spares, ground support equipment, Government Furnished Property (GFP) accountability, reporting, logistics planning, and event support at CONUS and OCONUS locations as directed by the Government. Purpose of Industry Response: The Government is requesting capability statements from industry to determine whether any source, other than the incumbent contractor, can perform the requirements within the Government’s required schedule while avoiding duplication of cost and transition delays. Responses should provide enough information for the Government to assess technical capability, schedule risk, cost duplication, access to necessary data/equipment, and relevant past performance. The Government will use the information received to support acquisition planning, market research, and determination of whether competition is practicable. Requested Information: 1. Company name, address, CAGE code, Unique Entity ID, point of contact, telephone number, and email address. 2. Socioeconomic status, applicable NAICS code(s), and whether the company intends to perform as a prime contractor, subcontractor, teaming partner, or joint venture. 3. Description of current technical capability to support MQM-170, MQM-171, and MQM-186 (or equivalent based on attached performance requirements) aerial target operations and any other ADA-T II target systems, including production, maintenance, field operations, launch/recovery, mission payload integration, and event support. If your firm does not possess the proprietary TDP, explain your strategy to reverse-engineer or develop equivalent systems, including estimated timelines for airworthiness certification. 4. Evidence of access to technical data, software, tooling, configuration information, support equipment, qualified personnel, safety releases, airworthiness documentation, and supply chain needed to perform without Government-funded requalification or extensive transition. 5. Specific transition plan and timeline to assume full performance with zero degradation to the operational tempo or support to scheduled training, test, and operational events. Identify any Government actions, data, GFP, facilities, or lead times required. 6. Identification of the estimated Non-Recurring Engineering (NRE), start-up, and transition costs your firm would require to assume full performance and delivery of the ADA-T II requirement. This should include, but is not limited to, estimated costs and timelines for tooling, support equipment, First Article Testing (FAT), airworthiness/safety certifications, range integration, software development/integration, and program management start-up. (Note: The Government will utilize this data to internally assess potential duplication of costs and schedule impacts). 7. Description of relevant past performance within the last five (5) years for aerial target manufacturing, unmanned aerial system target operations, range support, mission payload support, and field services for DoD customers. 8. Identification of any commercial products, commercial services, or non-developmental items that could meet all or part of the requirement, including modifications required and estimated schedule to reach operational readiness. 9. Risks, assumptions, constraints, proprietary restrictions, licensing limitations, export control considerations, and data rights issues that may affect performance, schedule, cost, or competition. Specifically address any limitations on the Government's use of technical data or software, and state whether the Government would receive Government Purpose Rights (GPR) for any deliverable. 10. Recommended contract type, ordering approach, and any other information that would assist the Government in determining whether competition is practicable. Responses: Interested sources shall submit written capability statements no later than 28 July 2026. Responses should be limited to 15 pages, excluding cover page, and shall be submitted electronically to Contract Specialist Phuong Hudson V, phuong.v.hudson.civ@army.mil and Procuring Contracting Officer Roberto J. Gotay at roberto.j.gotaygarcia.civ@army.mil. Proprietary information, if any, shall be clearly marked. The Government will not reimburse respondents for any costs associated with preparing or submitting a response. Oral communications are not acceptable in response to this RFI. Government Evaluation of Responses: A determination by the Government not to compete any resulting requirement, based upon responses to this RFI, is solely within the discretion of the Government. Information received will normally be considered solely for acquisition planning and for determining whether competitive procurement is feasible. If responses do not demonstrate that another responsible source can meet the Government’s requirements without substantial duplication of cost or unacceptable delay, the Government may proceed with the appropriate noncompetitive acquisition strategy, subject to required reviews and approvals. Attachments: Attachment 1, RPVT Final Perf Specification Attachment 2, MQM-186 Aerial Target Demonstrated Performance Attachment 3, MQM-171 Demonstrated Performance Disclaimer: This RFI does not constitute an Invitation for Bids (IFB), Request for Proposal (RFP), Request for Quotation (RFQ), or a commitment by the U.S. Government to issue a solicitation or award a contract. The U.S. Government will neither pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the U.S. Government. Additionally, all submissions become government property and will not be returned. Any information submitted by respondents is strictly voluntary. | Market Research | 336411 | No Set-Aside | 07/13/2026 | 07/29/2026 | Madison, AL | |
The Naval Air Systems Command (NAVAIR) intends to enter into sole source negotiations and subsequently award a Cost Plus Fixed Fee (CPFF) Delivery Order (DO) to Lockheed Martin Corporation-Missiles Fire Control (LMMFC) against Basic Ordering Agreement (BOA) N00019-23-G-0002. The anticipated DO is for efforts associated with LRASM integration on the B-52 aircraft platform, to include missile software updates, associated testing, test asset repair, and failure review boards. This contract is being pursued on a sole source basis under the statutory authority of 10 U.S.C. 2304 (c)(1) as implemented by Federal Acquisition Regulation (FAR) Subpart 6.302-1, only one responsible source and no other services will satisfy agency requirements. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. Unless stated herein, no additional information is available. Requests for the same will be disregarded. A determination by the Government not to compete this effort is solely within the discretion of the Government. Lockheed Martin is the sole designer, developer, manufacturer, and integrator of the Long-Range Anti-Ship Missile (LRASM). LMMFC alone has the requisite knowledge, experience, and technical data that can meet the Government's requirements within the required timeframe. Accordingly, LMMFC is the only known, qualified, responsible source that can fulfill the requirements specified herein. Subcontracting opportunities may be available and should be sought with Lockheed Martin via the Lockheed Martin Supplier Wire, a dedicated site for suppliers, at www.lockheedmartin.com/enus/suppliers.html. There is no commitment by the Government to issue a solicitation, make an award or awards, or to be responsible for any monies expended by any interested parties before award of a delivery order for the effort mentioned above. Information provided herein is subject to change and in no way binds the Government to solicit for or award a contract. | Pre-Solicitation | 336414 | No Set-Aside | 10/07/2026 | 10/22/2026 | Orlando, FL | |
Description: The U.S. Government plans to host an Industry Day to provide a technical and programmatic overview of future acquisition and development opportunities for the Maneuver-Short Range Air Defense (MSHORAD) Increment (Inc) 4 program. This event builds upon the previously published Request for Information (RFI) dated March 27, 2026, under Posting ID W31P4Q-26-RFI-0001. Description: The M-SHORAD Inc 4 will be a vehicle-agnostic palletized air defense system designed to protect maneuver forces including Joint Forcible Entry (JFE) and Mobile Brigade Combat Team (MBCT) with both light dismounted and mounted maneuver operations. The M-SHORAD Inc 4 will defend against Group 1-3 Unmanned Aircraft Systems and rotary and fixed wing aircraft. The M-SHORAD Inc 4 will utilize a Modular Open Systems Approach framework and will deliver tailorable and reconfigurable sensors, electronic warfare, and kinetic defeat capabilities to warfighters. Industry Day: The purpose of this Industry Day is to provide a technical and programmatic overview of M-SHORAD Inc 4 to identify prospective acquisition and development opportunities. The primary target audience for this event includes main system integrators interested in participating in future M-SHORAD Inc 4 development and production. Subsystem and technology suppliers (e.g. sensors, effectors, motion systems or remote weapon stations, C2 ) are also welcome to attend to facilitate industry collaboration and integration partnerships. Participation and Attendance Notice: Attendance and participation in this Industry Day are entirely voluntary. Participation in any subsequent procurement, transaction, or solicitation is not contingent upon attendance at this event. The U.S. Government will not reimburse any attendees for travel, preparation, or other costs associated with participating in this Industry Day. When: 27-28 October 2026 The agenda for the Industry Day is as follows: Registration, Check-In and Badging Welcome and MSHORAD Inc 4 Overview Keynote Speaker Joint Panel Discussion and Q&A Closing Remarks and Next Steps One-on-One breakouts (pre-registration required for the 27th & 28th Oct.) Where: Von Braun Center South Ball Room’s 1 & 2 700 Monroe Street SW Huntsville, AL 35801 Registration Details: To attend this event, all interested participants must complete the registration form using the official, updated link below or QR code: no later than 23 October 2026. To ensure broad industry representation, attendance is strictly restricted to a maximum of three (3) representatives per participating organization. Link: https://forms.osi.apps.mil/r/9AFtEjfeuM?origin=lprLink QR code: See Attached An email confirmation will be sent by the U.S. Government verifying successful receipt of registration. Each person attending the Industry Day must provide a Common Access Card, Driver’s License, or Passport to attend the meeting. Visitors are reminded that all bags and packages brought into the facilities are subject to inspection at all times by access control personnel. Attendees should arrive at the Industry Day entrance between 0800 and 0845 on the day of the event to ensure time for check-in prior to entering the facility. Contact Information: Primary Point of Contact: Jazmine Robinson Email: usarmy.redstone.pae-fires.mbx.shield-m-shorad-registration@army.mil | Special Notice | 336419 | No Set-Aside | 10/08/2026 | 10/23/2026 | Huntsville, AL | |
The Army Contracting Command ? Redstone Arsenal intends to issue solicitation number W31P4Q-26-R-0013 to fulfill the requirement for Inert Warheads, Part Number 13540611, for the Reduced Range Practice Rocket, M28A2. The anticipated resultant contract will be Firm-Fixed Price with a minimum quantity of 2,000 warheads and a maximum quantity of 6,800 warheads for each year, one base year and two option years. The solicitation will be issued as a 100% Small Business Set-Aside. Offers will not be solicited from other than small business concerns. By U.S. law, participation in small business set-asides are restricted to U.S. small businesses, therefore foreign requests for this solicitation will not be honored. Delivery Location: Delivery information will be provided with the solicitation.Delivery Schedule: Monthly deliveries shall be completed within a 12-month timeline. Qualification timeline ? From Contract award + not-to-exceed 180 calendar daysDelivery schedule Base Year ? 12 months starting after completion of qualification timelineDelivery schedule Option Year 1 ? 12 months starting from completion of Base Year 1 deliveriesDelivery schedule Option Year 2 ? 12 months starting from completion of Option Year 1 deliveriesThe anticipated solicitation will also contain DFARS clause 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting and 252.204-7020, NIST SP 800-171 DoD Assessment Requirements. Interested parties will be required to have a current CMMC status at CMMC Level 2 self-assessment or higher prior to award. | Pre-Solicitation | 336419 | Total Small Business Set-Aside | 03/09/2026 | 03/16/2026 | - | |
CANCEL HOUSING PROTECTIVE - Housing, Protective part will be manufactured following the drawings specified allowances, material specs, and services within the print. This will be a finished product upon arrival and must meet standards within the print. | Combined Synopsis | 336419 | Total Small Business Set-Aside | 01/12/2026 | 01/15/2026 | - |
Additional Details
Solicitation Number
PEO-26-005
Archive Date
Apr 1, 2026
Office Address
REDSTONE ARSENAL, AL, 35898-5090