J--Cell 9, 10 & 11 Dyno Rebuild

In accordance with FAR Parts 12 Commercial Items and FAR Part 13 Simplified Procedures, The U.S. Environmental Protection Agency (EPA), Testing & Advanced Technology Division (TATD), National Vehicle and Fuel Emissions Laboratory (NVFEL), Ann Arbor, Michigan, requires a contractor to repair/rebuild three (3) engine dynamometers. Engine dynamometer cell 9 a Meidensha Meiden 220/160 KW RPM 4000/8000 Serial number 1P6985LA dyno has vibration problems at speeds over 4000 RPM. Engine Dynamometer 10, a General Electric 150Hp, 2500/6000 RPM, Model 26G47 Serial 2310238, Type TLC-2464 has low armature resistance to ground and one-times higher vibration during the most recent annual maintenance. Engine dynamometer 11, a General Electric 200Hp, 2500/5000 RPM, Model 26G4240 Serial 2454368, Type TLC-2556H has low armature resistance to ground during the most recent annual maintenance. Repair of these faults are essential to prevent catastrophic damage to the dynamometers. A rebuild will be performed during this time to minimize the Advanced Testing Center?s loss of testing services and to minimize future maintenance issues. The acquisition will be subject to Small Business Set-Aside under North American Industry Classification System (NAICS) code is 334519 ?Other Measuring and Controlling Device Manufacturing with a size standard of 500 employees. Award will be made on a Best Value Basis. The solicitation will be posted on FedConnect.net approximately 15 days after the electronic posting of this synopsis on FedBizOpps. This office does not intend to mail hard copies of the solicitation. All responsible sources may submit a quote which shall be considered by the Agency. Point of Contact for this requirement is Gerold Young, Contract Specialist, at (513) 487-2660, or by email at young.gerold@epa.gov. Questions must be submitted in writing to Gerold Young via email. Telephone queries will not be honored.