GovChime
Notice ID: 6fffca8b82854ee1a92dd4941e23f0b2Special Notice

TECHNOLOGY LICENSING OPPORTUNITY: Hydrogen Contamination Detector

Responses closed . Full description on SAM.gov.

Overview

Response deadline
5:00 PM MST
Posted
January 22, 2026
Notice type
Special Notice
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
Department of Energy

Notice details

Office
TRIAD - DOE CONTRACTOR
Place of performance
Los Alamos, New Mexico, 87545
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
S-133399
Notice ID
6fffca8b82854ee1a92dd4941e23f0b2

Description

This invention by scientists at Los Alamos National Laboratory (LANL) introduces a new type of real-time hydrogen fuel contamination detector that can sense tiny amounts of harmful contaminants before they reach a fuel-cell vehicle. It works by using a special membrane that keeps itself properly hydrated using an internal water reservoir, allowing it to stay sensitive even when measuring completely dry hydrogen—a major challenge for existing sensors. Even small amounts of impurities can permanently damage a fuel-cell car’s power system, and today’s testing methods are slow, expensive, and often done only after problems occur. By enabling continuous, in-line monitoring at hydrogen fueling stations, this technology helps ensure that hydrogen is clean and safe, supporting the growth of a reliable and consumer-friendly hydrogen economy.

The Challenge:

As hydrogen becomes a mainstream clean fuel, even tiny impurities—like CO, H₂S, or excess moisture—can permanently damage the sensitive fuel-cell systems that power vehicles and equipment. Yet today, hydrogen quality is typically verified using expensive, lab-based instruments that require expert operators and provide results only after the fact. This delay means a single contaminated batch can affect many vehicles before anyone realizes there’s a problem. Traditional sensor concepts have failed because they require adding moisture to the hydrogen stream, which interferes with detecting water contamination and violates emerging fuel standards. The industry needs a simple, real-time, in-line quality monitor that works with dry hydrogen and can be deployed directly at fueling stations.

The Solution:

The electrochemical Hydrogen Contamination Detector (HCD) is a low-cost device based on the very same materials and components that make up PEM fuel cells. It uses an ultra-low Pt-loaded sense electrode that is similar to a fuel cell electrode but hypersensitized to impurities by virtue of the greatly reduced catalyst loading. Impurities that bind to Pt catalysts inside the fuel cell and interfere with hydrogen absorption and dissociation will behave the same way to the low Pt-loaded HCD working electrode. The low loading makes the HCD even more susceptible to the effects of trace levels of high-impact impurities. The HCD can work in completely dry hydrogen because of LANL’s patented internal water reservoir and wicking mechanism. It can function at much higher sampling pressures than commercial analyzers because it is constructed with off-the-shelf single cell hardware that can easily handle pressures up to 250psi.

The HCD approach applies a voltage to electrochemically pump hydrogen gas through the HCD while sampling the dry hydrogen stream to be analyzed for fuel quality. If contaminants are present, the measured hydrogen pumping current will decrease. At well-defined intervals, a high voltage pulse is applied to electrochemically “clean” the ultra-low loaded Pt electrode that “resets” the HCD continuously. The HCD not only detects the impurity but also can track the impurity level in the sample gas as it rises and falls over time. By comparing the response to a certified ultra-high purity “zero-gas” hydrogen source and prior calibration with span gases, the station operator will be immediately informed if the hydrogen to be sold is contaminated and at near real time.

In the many baseline experiments performed over 18 months of testing, the HCD has a stable average baseline current demonstrating the efficacy of the approach.

Key Advantages:

  • True real-time monitoring: Detects contamination instantly for the 3 most severe fuel cell stack contaminants and does so before it reaches vehicles or equipment.
  • Works with dry hydrogen: Eliminates the need to humidify the gas stream, enabling accurate measurement of all impurities—including water.
  • Compatible with fueling infrastructure: Uses proven PEM fuel-cell components and can be installed directly in high-pressure hydrogen delivery lines.
  • Protects fuel-cell investments: Prevents costly damage to fuel-cell stacks by catching impurities early.
  • Enables the hydrogen economy: Provides the reliability and safety assurance required for widespread adoption of hydrogen vehicles and refueling stations.

Market Applications:

  • Hydrogen Production & Distribution
  • Future concepts for Geological Storage of Hydrogen and Co-mingling of Fuels (e.g., hydrogen and methane/natural gas)
  • Fueling Infrastructure
  • Fuel-Cell Vehicle & Equipment Manufacturers
  • Industrial Hydrogen Users
  • Backup Power & Energy Systems
  • Testing, Certification & Safety Organizations
     

Development Status: TRL 6

US Patent No. 10,490,833 B1  

LA-UR-25-32317

LANL Tech Partnerships: Unlock the Innovative Potential

Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products.

LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov.

Note: This is not a call for external services for the development of this technology.

https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology

https://www.lanl.gov/engage/collaboration/feynman-center/tech-and-capability-search

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Kathleen McDonald

Secondary Contact

Lindsay Augustyn

Documents

Files (1)

  • FCI-tech-summary-visual-HCD.jpg

    231 KBAdded in Special Notice version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Special NoticeCurrent

    TECHNOLOGY LICENSING OPPORTUNITY: Hydrogen Contamination Detector

    Notice 6fffca8b82854ee1a92dd4941e23f0b2 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Unlike conventional multichannel atomic magnetometers that require one vapor cell and one optical system for each sensing channel, the patented Multi-Channel Atomic Magnetometer (MCAM) architecture from Los Alamos National Laboratory replaces many independent atomic magnetometers with a single shared vapor cell and optical system that simultaneously generates multiple independent sensing channels. MCAM is a non-cryogenic multi-channel optical quantum sensor in a single module that captures ultra-faint biomagnetic signals from the brain, heart and other sources with sensitivity approaching that of the cryogenic SQUID-based systems that have defined the field for decades. MCAM delivers that performance at roughly one-tenth the per-channel cost without a drop of liquid helium. The module pairs one large alkali-metal vapor cell with broad pump and probe laser beams read out by a photodiode array, providing 16 independent sensing channels in a single housing, scaling into helmet-style arrays of hundreds of channels, and flexing around the patient rather than forcing the patient into a fixed cryogenic dewar. Together, these attributes more easily allow for magnetoencephalography, magnetocardiography and magnetic-particle imaging while accelerating overall magnetic imaging workflows. Ongoing development is aimed at extending the sensing architecture from the centimeter scale characterized in the current prototype toward micrometer-scale spatial resolution, opening a path into cellular-scale magnetic imaging that current cryogenic and room-temperature arrays cannot address. How it Works The MCAM module operates on the spin-exchange relaxation-free (SERF) regime, in which atomic spins of alkali-metal atoms inside a large, sealed vapor cell are aligned by a circularly polarized broad pump laser beam through optical pumping and then interrogated by a linearly polarized broad probe beam propagating along a nearly parallel path. An external magnetic field of interest tilts the aligned atomic spins by an angle proportional to the field strength, and that tilt rotates the polarization plane of the probe beam through the Faraday effect; a photodiode array reads the optical rotation simultaneously at multiple points across the cell, with each photodiode pixel reporting on its own localized sensing volume. A buffer gas inside the cell restricts atomic motion so that the small cell volumes behind each pixel behave as independent sensing channels, a rear mirror folds the beams back through the cell to shorten the stand-off distance to the magnetic source, and transparent Pyrex wire heaters hold the cell at the operating temperature needed for SERF operation. Technology Description The patented shared-cell architecture generates multiple independent sensing channels from a single vapor cell, a single pump beam, a single probe beam, and a single detector array. A pair of broad, co-propagating laser beams, one for optical pumping and the other for probing, traverses the shared vapor cell to manipulate the internal atomic spins, converting the local magnetic field distribution into a spatially resolved optical signal that is read out by a multi-pixel photodetector. Because the buffer gas inside the cell restricts atomic diffusion, each pixel of the detector reports on its own small, spatially distinct region of the cell; therefore, the single module yields a two-dimensional map of the local magnetic field rather than a single-point measurement. Operation in the SERF regime, together with an integrated heating and shielding arrangement and a fold-back optical geometry that shortens the distance from the sensing volume to the magnetic source, sets the sensitivity floor in the low tens of femtotesla per root hertz at low frequency. A development path has been identified to reduce the effective sensing-volume scale from the roughly 1 cm per-channel footprint of the current prototype toward the 1 μm range, which would extend the platform from whole-organ mapping into micro-scale magnetic imaging regimes. Architecturally, the MCAM module is engineered for arrays. Because all channels within a single module share one vapor cell, one laser pair, and one optics assembly, the per-channel parts count and tuning effort drop sharply versus designs that stack many single-channel sensors. Fiber-optic coupling between the laser sources and each sensor head lets modules be repositioned independently, so many modules can be tiled into a conformal helmet or surface array that adapts to head or torso shape and supports configurations that rigid large-cell predecessors cannot accommodate. The design is compatible with several alkali-metal and buffer-gas options and with per-module bias coils that allow each module to be tuned individually inside a larger array. Advantages Development path toward micrometer-scale spatial resolution, a roughly four-order-of-magnitude improvement over the current centimeter-scale prototype and an enabler of cellular-scale magnetic imaging Sensitivity at the low tens of femtotesla per root hertz, comparable to cryogenic SQUID arrays, while using a warm vapor, non-cryogenic architecture Roughly tenfold per-channel cost reduction by sharing one vapor cell, one laser pair and one optics set across 16 channels No liquid cryogens, eliminating recurring cryogen costs and simplifying siting, maintenance and shielding Fiber-coupled, repositionable sensor heads that conform to the patient rather than forcing the patient into a fixed dewar Scalable into helmet-style arrays of hundreds of channels, including a size-adjustable pediatric configuration Shorter sensor-to-source stand-off via rear-mirror beam folding, sharpening spatial resolution of biomagnetic sources Market Applications Medical Diagnostic Imaging (magnetoencephalography systems for epilepsy, stroke and neurodegenerative workups; magnetocardiography for arrhythmia and ischemia screening) Pediatric and Adaptive Neuroimaging (size-adjustable MEG helmets, point-of-care brain monitoring) Micro-scale Biomagnetic Imaging (single-neuron and small-circuit brain activity mapping, high-resolution cardiac tissue mapping) Cancer Diagnostics (magnetic nanoparticle imaging for tumor localization and targeted-therapy tracking) Magnetic Resonance Imaging (low-field/ultra-low field, portable MRI, functional brain imaging) Sensing (low-frequency antennas for underground or undersea links, geomagnetic surveying) Instrumentation (fundamental physics, biomagnetism laboratories, multichannel sensor R&D) Development Status: TRL 4 U.S. Patent No. 11,105,865 LA-UR-26-25904 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
94%
Special Notice12/13/2026
This invention from scientists at Los Alamos National Laboratory provides a new way to monitor how materials like epoxies, adhesives and coatings harden and gain strength during manufacturing. It combines two measurement techniques to track, at the same time and without damaging the material, both the chemical changes occurring as the material cures and the resulting increase in strength and stiffness. By linking these changes in real time, this Polymer Cure Monitoring System technology gives manufacturers and product developers a clearer understanding of when a material has properly cured and is ready for use. This process can improve quality control, reduce production errors, speed up product development and lower the risk of failure in high-value applications such as aerospace, automotive, electronics and structural bonding. How it Works: The Real-Time Polymer Cure Monitoring System is based on an integrated measurement approach that combines complementary sensing methods within a single analytical platform to observe material changes as they occur. One sensing modality tracks chemical evolution at the molecular level, while the other evaluates corresponding changes in physical performance characteristics. By collecting and aligning these data streams in real time, the system establishes a direct relationship between composition and material behavior throughout processing. The approach is designed to operate under controlled conditions without disrupting the material, enabling continuous monitoring of transformation from initial state to final form. Key Advantages: Simultaneous measurement of chemical and mechanical changes Real-time monitoring during material processing Non-destructive, in-place evaluation Direct correlation between composition and performance Improved process control and consistency Applicable across a range of polymer and composite systems Market Applications: Aerospace & Defense Automotive & Transportation Electronics & Electrical Energy & Industrial Equipment Construction & Infrastructure Advanced Manufacturing & Materials Development Development Status: TRL 3 US Provisional Patent Pending LA-UR-26-21226 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
93%
Special Notice03/13/2026
This technology, Industrial Lens-Coupled Radiography, enables clearer, faster and more reliable X-ray inspection of large, dense metal parts by redesigning how high-energy X-rays are captured and converted into digital images. Unlike conventional medical-style detectors that struggle with thick or 3D-printed components, this system from Los Alamos National Laboratory uses a more efficient light-collection approach to dramatically improve image quality and inspection speed at megavoltage energies. The result is scalable, high-resolution CT imaging capable of detecting sub-millimeter defects inside complex industrial parts — helping aerospace, defense, energy and advanced manufacturing companies ensure safety, reduce scrap and increase production throughput. How it Works: Industrial Lens-Coupled Radiography operates by first converting incoming high-energy X-rays into visible light within a scintillator designed for megavoltage conditions. That light is then optically relayed to a digital flat-panel imaging sensor, rather than being directly attached in the traditional medical configuration. This optical architecture allows the X-ray conversion stage and the digital detector to be optimized independently for high-energy industrial use. The system captures calibrated reference images alongside inspection images, and software processing corrects for detector and beam variations to produce a uniform, high-fidelity final image suitable for radiography or computed tomography workflows. Technical Overview: Industrial Lens-Coupled Radiography is engineered for megavoltage (≥1 MeV) industrial X-ray systems and is optimized specifically for high-energy radiography and computed tomography applications. The architecture separates the X-ray conversion stage from the digital detection stage using optical coupling, allowing each to be independently optimized for efficiency, format size and durability under high-energy conditions. The system supports scalable, large-area detector configurations suitable for high-magnification inspection geometries and integration with commercial flat-panel sensors and industrial microfocus X-ray sources. A structured calibration and correction framework compensates for detector bias and beam non-uniformity, enabling consistent, high-fidelity image reconstruction within standard industrial CT workflows. Key Advantages: Purpose-built for megavoltage imaging – Engineered specifically for high-energy industrial X-ray systems. Higher signal utilization – Captures and converts more usable X-ray energy for clearer imaging of dense materials. Scalable large-format design – Supports inspection of large and complex components. High-resolution defect detection – Compatible with high-magnification inspection geometries for fine feature visibility. Seamless industrial integration – Designed to work with commercial flat panels and existing CT workflows. Market Applications: Aerospace & Defense Additive Manufacturing Energy & Power Generation Automotive & Transportation Nuclear & National Security Development Status: TRL 3 US Patent pending, S-167667.001 LA-UR-26-22770 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
90%
Special Notice04/24/2026
Entangled Photon Quantum FTIR BroadQ introduces a new way to gather infrared information by using entangled photons without the need of conventional thermal detectors. Developed by scientists at Los Alamos National Laboratory, the platform combines broadband entangled photon generation with a dual-mode imaging layout, creating a path toward compact infrared spectroscopy and microscopy that can operate at very low light levels, avoid cryogenic cooling and support both near-field and far-field measurements from one setup. That combination makes BroadQ attractive for sensitive samples, portable field instruments and advanced imaging workflows where conventional FTIR systems face practical limits. How it Works BroadQ Entangled Photon Quantum FTIR scans a pump beam across entangled photon sources containing spatially varying regions that produce entanglement across different spectral bands, then uses descan optics to combine the output into a stationary broadband beam. Reflective parabolic optics and scan/descan mirror pairs help preserve image quality while avoiding chromatic dispersion, which would otherwise weaken performance across such a wide spectral range. The resulting entangled photons can be the input for an imaging system that supports either near-field or far-field operation without rebuilding or reconfiguring the instrument, which gives the platform flexibility for different spectroscopy and microscopy needs. Technical Description The core innovation is a source of broadband entangled photons. Rather than relying on a single narrowband entangled source, the BroadQ Entangled Photon Quantum FTIR platform scans across structured regions in a source and merges the emitted output into one beam, extending spectral coverage across the near- to mid-infrared range. The approach is source-agnostic, so it can work with nonlinear crystals, meta-surfaces or liquid crystals. A second layer of BroadQ is the imaging architecture. The optical layout places the source at an imaging plane and then relay images or collimates the beam so the same setup can support both near-field and far-field imaging. That matters because near-field imaging can resolve smaller features than far-field methods, while far-field arrangements remain useful for readout of larger fields of view. The disclosed system is intended to make quantum FTIR and related quantum imaging workflows more practical by pairing broadband entangled light with an instrument layout that is easier to use and more adaptable than current approaches. Advantages Broadband infrared coverage from a single platform No need for cryogenic MCT detectors Supports both near-field and far-field imaging without reconfiguration Works at very low light levels, reducing sample damage risk Compatible with multiple entangled photon source types More portable and integration-friendly than conventional FTIR setups Market Applications Analytical Instrumentation (FTIR microscopes, spectroscopy systems) Life Sciences (light-sensitive biological samples, cellular imaging, plant imaging) Chemical Sensing (material identification, spectral analysis) Defense and Security (trace detection, threat reconnaissance) Semiconductor and Materials Characterization (thin films, advanced materials) Remote Sensing (field-deployable infrared analysis) TRL 3 US Patent pending LA-UR-26-23629 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
86%
Special Notice06/06/2026
LiSA (Lithium Sensing with Advanced Polymer Systems) is a field-deployable, polymer-based sensing platform from Los Alamos National Laboratory that enables rapid, in situ detection of lithium in geothermal brines and clay-rich formations — eliminating the need for costly full-depth drilling and time-intensive laboratory assays during early-stage exploration. Engineered to operate under variable temperature, salinity and pH conditions typical of lithium-hosting environments, LiSA allows exploration teams to confirm lithium presence in real time, reduce exploration risk and accelerate resource validation. By lowering costs, shortening decision cycles and improving targeting accuracy, the technology addresses a critical bottleneck in domestic lithium development and offers scalable potential for adaptation to other critical minerals, positioning licensees at the forefront of next-generation resource exploration. Technology Description: LiSA works by using a specially designed sensing material that selectively recognizes lithium when it comes into contact with underground fluids or soil. The sensing material is integrated into a portable platform that can be deployed directly in the field, where it interacts with samples onsite and produces a measurable signal if lithium is present. Because the sensing component is engineered to remain stable under the high salinity, temperature and varying chemical conditions typical of lithium-bearing environments, it can function reliably outside of a laboratory setting. In essence, the system translates the chemical presence of lithium into a rapid, field-readable response that helps guide exploration decisions in real time. The Opportunity: By integrating LiSA’s selective sensing technology into exploration services, downhole tools, surface sampling systems, geothermal operations or direct lithium extraction (DLE) platforms, our partners can offer their customers faster resource validation, reduced exploration risk and improved decision-making in the field. LiSA provides a pathway to differentiate your portfolio with real-time, on-site lithium detection capability while positioning your organization at the forefront of domestic critical mineral development, with potential expansion into sensing for other high-value elements as market demand evolves. Key Advantages: Field-deployable and portable – Enables onsite lithium detection rather than requiring laboratory analysis. In situ measurement – Identifies lithium directly in subsurface fluids and soils without full core recovery. Faster decision-making – Provides near real-time results to guide drilling and exploration strategy. Lower exploration costs – Reduces reliance on expensive drilling campaigns and lab assays. Operates in harsh environments – Engineered to function under variable temperature, salinity, and pH typical of geothermal and clay systems. Platform adaptability – Tunable polymer approach offers potential extension to other critical minerals. Market Applications: Lithium mining and mineral exploration Geothermal energy development Direct lithium extraction and brine processing Oil and gas field services and subsurface technologies Analytical instrumentation and field sensing technologies Development Status: TRL 4 US Patent pending LA-UR-26-23292 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
86%
Special Notice12/07/2026

Additional Details

Solicitation Number

S-133399

Archive Date

Feb 12, 2027

Office Address

Columbus, OH, 43201