Notice ID: a10447c258028ecedf07053ac11cb725Combined Synopsis/Solicitation
CHAMBER CART
Archived on May 22, 2013. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 9:30 PM UTC+02:00
- Posted
- April 26, 2013
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 334511: Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
- Agency
- Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
Notice details
- Office
- DEPT OF COMMERCE NIST
- Place of performance
- 100 BUREAU DRIVE, Gaithersburg, 20899
- PSC
- 66: INSTRUMENTS AND LABORATORY EQPT
- Last updated
- Dec 5, 2025
Identifiers
- Solicitation number
- SB1341-13-RQ-0330
- Notice ID
- a10447c258028ecedf07053ac11cb725
Description
AMENDMENT 0001: The purpose of this amendment is to extend the due date for quotations. The due date for quotations is hereby extended as follows: From: April 29, 2013 by 2:30 pm eastern To: May 7, 2013 by 2:30 pm eastern. All other terms remain unchanged.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
Solicitation:
SB1341-13-RQ-0330- Combined Synopsis
- 2×
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
DISCLAIMER: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. INTRODUCTION: The Naval Air Systems Command (NAVAIR) at Patuxent River, MD announces its requirement to procure production-representative, flight-certified hardware to transition the AN/ALE-47 Common Carriage (CC) Countermeasures Dispensing System from the Engineering and Manufacturing Development (EMD) phase into rate production. This modernization program replaces the legacy AN/ALE-47 round-magazine dispenser system with a modernized, square-magazine architecture. This allows the Navy to deploy standard 1"x1"x8" square expendable countermeasures, expanding aircraft magazine capacity from 30 to 48 rounds and aligning joint logistics with the USAF, US Army, and F-35 platforms. The contract will cover the manufacture, testing, and delivery of the following Weapon Replaceable Assemblies (WRAs) and associated Support Equipment: SA-2669A/ALE-47(V) Common Carriage Sequencer: Modernized electronic control unit with upgraded processing, firmware loading capabilities, and increased memory to support the legacy dispenser, as well as next-generation intelligent expendables. D-74/ALE-47(V) Common Carriage Dispenser Housing Assembly: Ruggedized mechanical housing that mounts to the aircraft structure to secure the magazine assembly. MX-12772/ALE-47(V) Common Carriage Magazine Assembly: Upgraded high-capacity magazine capable of holding 48 individual 1"x1"x8" square expendable cartridges (a 60% capacity increase over legacy systems). AN/ALM-300 Support Equipment: Next-generation Organizational-Level (O-Level) flight line test sets. The estimated contract value will be $104,000,000.00 across United States Navy and Marine Corps. The proposed class of contracting actions will procure an estimated range of 114 - 186 shipsets per year for Fiscal Year (FY)28 through FY30 to satisfy the requirement. THIS SOURCES SOUGHT IS NOT A REQUEST FOR PROPOSAL. It is a market research tool being used to determine potential and eligible businesses capable of providing the services described herein prior to determining the method of acquisition and issuance of a Request for Proposal. The Government is not obligated to and will not pay for any information received from potential sources as a result of this notice. ELIGIBILITY: The Product/Service Code (PSC) for this requirement is 5865: Electronic Countermeasures, Counter-countermeasures and Quick Reaction Capability Equipment. All interested businesses are encouraged to respond. ANTICIPATED PERIOD OF PERFORMANCE: This contract is planned to contain a three (3) year ordering period to satisfy requirements for FY28 through FY30. The anticipated award date is May 2028. The Government anticipates end item deliveries will commence as early as 12 months after each contract delivery order award. Initial production is anticipated to be an estimated 10 shipsets per month. ANTICIPATED CONTRACT TYPE: The contract type for this effort is anticipated to be a Firm Fixed Price Indefinite Delivery Indefinite Quantity (IDIQ) contract. PROGRAM BACKGROUND: The legacy countermeasure dispensing systems across the Navy fleet are limited by 1980s computer processing architectures and a proprietary round-magazine design with a capacity of 30 expendables. The Common Carriage (CC) program modernizes this critical survivability suite. By upgrading to square expendable geometry, the Navy streamlines its global supply chain with joint partners and paves the way for advanced, intelligent expendables (e.g., active radio-frequency expendables). Additionally, the system increases the capacity from 30 expendables to 48 expendables. The system also modernizes sequencing, upgrading the processing power and communication datalinks. This program is transitioning out of Engineering and Manufacturing Development (EMD) and entering production to outfit fleet deployers. REQUIRED CAPABILITIES: Interested sources must demonstrate qualified capability, active facilities, and certified quality controls (such as AS9100) to execute: Flight-Critical Electronic WRA Assembly & Quality Control: Demonstrated capability to manufacture, assemble, and test flight-critical electronic systems and Circuit Card Assemblies (CCAs) in accordance with a certified aerospace quality management system (AS9100 or equivalent). The vendor must demonstrate experience producing high-reliability avionics designed to withstand severe thermal, shock, and vibration operational environments. Precision Mechanical & Structural Castings: Production of thin-walled aluminum castings (D-74 Housing) and machined blocks (MX-12772 Magazine) to withstand maritime environments and carrier-landing shock. Production Environmental Stress Screening (ESS) & ATP: Execution of 100% throughput of Acceptance Test Procedures (ATP) and ESS (Random Vibration and Thermal burn-in/cycling) to isolate manufacturing defects. Firmware/Software Loading and Configuration Control: Secure loading, verification, and configuration management of Government-provided Operational Flight Programs (OFP) onto the non-volatile memory of the SA-2669A Sequencer. Supply Chain & Long-Lead Time Management: A demonstrated capability to manage and mitigate long-lead time material procurement for critical microelectronic components, with a supply chain structure that can support a 12-month post-award initial delivery schedule Counterfeit Part Prevention and Material Traceability: A documented and verifiable counterfeit part prevention and detection system compliant with DFARS 252.246.7007 and 7008. The System must ensure full material traceability for all components and critical hardware back to the original component manufacturer. Interested businesses shall demonstrate that your company currently possesses or has authorized access to the necessary technical data, or has a viable plan to obtain, generate, or otherwise secure the necessary technical data, and that it will be maintained throughout the duration of the effort being solicited. Interested businesses shall demonstrate the capability to complete the requirement within the Government’s required timeline. You may also submit information that demonstrates how you could potentially meet this requirement for future production opportunities. SUBMISSION DETAILS: Interested businesses shall submit a brief capabilities statement package (no more than twelve (12) 8.5 x 11 inch pages, font no smaller than 12 point, 1.5 line spaced) demonstrating their ability to perform the requirements described herein. In addition to these requirements, interested businesses shall adhere to the following submission instructions: 1. Document Type: Microsoft Word 2. Delivery: The capability statement package shall be sent by electronic mail (email) to Elizabeth V. Lamb at elizabeth.v.lamb2.civ@us.navy.mil. 3. Response Date: Submissions must be received via email no later than 1:00 p.m. Eastern Standard Time on 30 October 2026. 4. No classified information shall be submitted in response to this Sources Sought. 5. Questions or comments regarding this notice may be addressed to Elizabeth Lamb at the above email address. No phone calls will be accepted. 6. All responses shall include Sources Sought Notice name/number, Company Name, Company Address, Company Business Size, Cage Code, and Points-of-Contact (POC) including name, phone number, and email address. 7. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government. Any information or materials provided in response to this Sources Sought Notice will not be returned. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought Notice. | - | Market Research | 10/30/2026 |
The Defense Logistics Agency-Aberdeen, on behalf of the Army Integrated Logistics Supply Center (ILSC) – Supply Chain Management Directorate (SCMD) – Strategic Sourcing Directorate (SSD), intends to acquire Parts for Doppler GPS Navigation System. Requirements Description: The United States Army is looking for sources with the ability to provide parts for the Doppler GPS Navigation System. The items to be procured for the Doppler GPS Navigation System . The Government does not possess specifications or detailed drawings for the referenced system. The Government does not possess the technical data package (TDP) for the parts. Background Information: Previous Contract/Order No. W15P7T-13-D-E013 The following additional NAICS apply: 334220, 334413, 334416, 334418, 334419, 336413, 336319 Items and/or Services to Be Procured under a Single Award IDIQ: NSN: 5895-01-518-8783 NOMENCLATURE: CONVERTER SIGNAL DA PART NUMBER: P320A002-02 NSN: 5998-01-530-3442 NOMENCLATURE: CIRCUIT CARD ASSEMBLY PART NUMBER: H274A112-01 NSN: 5895-01-653-0833 NOMENCLATURE: CONVERTER SIGNAL DA PART NUMBER: P320A002-04 Requested Response Information: We request that sources who can manufacture the listed parts or services submit information to show their capability to manufacture the same part. At a minimum the support information you submit should include, but is not limited to, the following types of documentation: Questionnaire, drawings, test results, information on previous Government and commercial contracts, data rights, etc. In your response, please include your company name, CAGE code, and a technical point of contract with email address and telephone number. Notice, Response Due Date, and Points of Contact: This is NOT a Request for Quote or Proposal. The Government does not intend to award a contract on the basis of this SSA or reimburse any costs associated with the preparation of responses to this SSA. This Sources sought announcement (SSA) is for planning and market research purposes only and shall not be construed as a commitment by the Government. The information gathered from this announcement will be used to determine if responsible sources exist, and to assist in determining if this effort can be competitive and/or set aside for Small Business. Furthermore, the Government will use the information, in part, to determine the best acquisition strategy for a potential procurement action and/or to assist in making acquisition strategy decisions in the future. All SSA responses should be emailed to the Points of Contact at the email addresses listed below. No phone inquiries will be accepted, either as a response to this action or for information requests. All requests for information must be submitted via email to the Technical Point of Contact and the DLA Aberdeen Small Business Office. Contractor Questionnaire Please complete the following questions. If a question does not apply, please enter N/A or non-applicable. 1. Provide a brief summary of your company and its core competencies. 2. Please provide the following Point of Contact information on all responses: Company: Address: Point of Contact: Phone Number: Fax Numbers: Email Address: CAGE Code: DUNS Number: 3. Describe your Company's past performance in the manufacturing and/or supplying of Power Supply and Circuit Card Assembly in the past. Provide Contract Number, Point of Contact (POC), e-mail address, phone number, and a brief description of your direct support of the effort. 4. Describe the qualifications of your engineering staff who have experience in the design and production of supplies similar in complexity and technology to power supplies, circuit cards, data processors, and other electronic items. 5. Describe your company's experience in identifying the test equipment for components similar in complexity and technology to what is used in the listed items to include power supplies and a circuit card assembly. 6. Describe your company's experience and process for managing obsolescence issues. 7. Does your company maintain a Program and Assessment Tool to monitor and analyze the availability of components to allow clear and precise tracking of all obsolescence issues? If so, please elaborate on the Program and Assessment tool(s). 8. Describe your company's experience in identifying alternatives for unavailable or obsolete materials or components to mitigate obsolescence issues. 9. Discuss your company's capability to meet US Government delivery requirements for this specific product. 10. The Government prefers Spot Buy. Can your company meet the Government preference. If not, please describe what you are willing to provide. 11. The Government prefers Fixed Quantity. Can your company meet the Government preference. If not, please describe what you are willing to provide or what you would prefer to provide. Please explain. 12. Do you have product(s) or keep products in stock? 13. Are there any vendors in your supply chain that you are concerned would prevent you from meeting the Government delivery schedule? – If so, please describe the company and what steps you are taking or have taken to mitigate. If it is a Government-directed source, please describe any other vendors that may have the capability to meet the delivery schedule. | - | Market Research | 11/26/2026 |
The Department of the Navy, Naval Surface Warfare Center Carderock Division (NSWCCD), announces Solicitation No. N0016727R0005 (previously N0016726R1009) for the Environmental and Ship Motion Forecasting Follow-On (ESMF FO) program. This requirement is being solicited as a full and open competition. The Government intends to award one single-award, Cost-Plus-Fixed-Fee (CPFF), indefinite-delivery, indefinite-quantity (IDIQ) contract with a five-year ordering period. To access the solicitation and available attachments, prospective offerors shall refer to the attachments and links associated with this notice. * Attachments 01 through 06 are subject to Distribution Statement D and are authorized for distribution only to the Department of Defense and U.S. DoD contractors. To request and receive these attachments, prospective offerors must possess an active registration in the System for Award Management (SAM.gov) and a verified, active Joint Certification Program (JCP) certification supported by an approved DD Form 2345. JCP information is available at https://www.public.dacs.dla.mil/jcp/ext/#. * Prospective offerors requesting Attachments 01 through 06 shall submit their request to Joseph Estrella at Joseph.l.estrella.civ@us.navy.mil, with copies to Michael L. Jones at michael.l.jones5.civ@us.navy.mil and William Finke at william.g.finke.civ@us.navy.mil. The request email shall include the companys CAGE Code and use the following subject line: N0016726R1009. [Insert Company Name]. Request Copy of Attachment 01 through 06. * All questions regarding this solicitation should be submitted through the Procurement Integrated Enterprise Environment (PIEE) Question and Answer Solicitation Module no later than 10 calendar days after solicitation issuance. * Vendors should consult the official PIEE Solicitation Module Vendor Access Instructions for account registration and access procedures at https://www.acq.osd.mil/asda/dpc/ce/cap/docs/piee/PIEE_Solicitation_Module_Vendor_Access_Instructions.pdf. * NOTE: Documents with reference to N0016726R1009 equate to N0016727R0005. Pre-Solicitation Notice ID: N00167-26-RFPREQ-CD-80-0198. | - | Solicitation | 12/21/2026 |
Please see attached. | - | Market Research | 11/20/2026 |
This is an Award Notice prepared in accordance with FAR 5.301. The Naval Air Warfare Center Aircraft Division (NAWCAD) awarded contract N00421-26-C-1025 that resulted from Solicitation N00421-26-R-1013 to Tiger Century Aircraft, Inc (TCA), Unit C, 101 Commercial Way, Tehachapi, CA 93561-1407 on 23 September 2026 in the amount of $2,732,543.83. N00421-26-C-1025 was awarded as a sole source to TCA under authority FAR 6.103-1 Only one responsible source and no other supplies or services will satisfy agency requirements. TCA will provide the development, qualification, manufacture, and delivery of DAS with a built-in OAT display unit which will prevent loss of aircraft due to out-of-control flight (OCF) and mitigate a known issue with F-5 Functional Check Flights (FCF), respectively. This effort was issued as a sole source to TCA under NAICS Code 334511 (Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing) which resulted in the placement of a contract with a two-year period of performance. The contract consists of Firm-Fixed-Price (FFP) CLINs for Production Kits, Production Spares, Simulators, and Technical Data. This synopsis is for informational purposes only. | - | Awarded | Open |
Additional Details
Solicitation Number
SB1341-13-RQ-0330
Archive Date
May 22, 2013