Notice ID: cf94b0b33f2e505872a4a8e52aaac39eCombined Synopsis/Solicitation
Radial Collimator
Archived on June 30, 2014. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 10:00 PM UTC+02:00
- Posted
- April 29, 2014
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 332710: Machine Shops
- Agency
- Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
Notice details
- Office
- DEPT OF COMMERCE NIST
- Place of performance
- 100 Bureau Drive, Gaithersburg, 20899
- PSC
- 66: INSTRUMENTS AND LABORATORY EQPT
- Last updated
- Dec 5, 2025
Identifiers
- Solicitation number
- SB1341-14-RQ-0198
- Notice ID
- cf94b0b33f2e505872a4a8e52aaac39e
Description
AMENDMENT I The above referenced solicitation is hereby amended to respond to vendor questions and to provide an updated specification drawing as follows: Question: Number 5 on the notes of the drawing, foil frame spacers, can these be cast aluminum? Answer: Number 5 states "or equivalent", however, some may not interpret that to apply to the non-magnetic properties. Yes, cast aluminum is acceptable as it is equivalently non-magnetic. The note has been updated. Question: Could aluminum be used instead of stainless steel for the side plates? Answer: Number 4 needs to stay as non-magnetic stainless steel, 316 or equivalent as it is part of our shielding. Question: Can the size of the M16 hardware be reduced and the threaded nuts below the surface of the side plates? Answer: The M16 hardware is a max size as stated on the drawing. It can be smaller but not larger. Same goes for the overall assembly width with the max bolt size and sticking out; it is a max dimension, so if the contractor wants to have them flush with the sides to more easily meet the hard dimension on the casing width that is acceptable. A revised drawing, attached, entitled radialcollimator-1 is provided based on this amendment. The due date and time remains unchanged and all quotations must be received by May 5, 2014 at 3pm EST.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
Solicitation:
SB1341-14-RQ-0198- Combined Synopsis
- 2×Combined SynopsisCurrentApr 22, 2014
Radial Collimator
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
General Information This is a solicitation for non-commercial products prepared in accordance with the format in Federal Acquisition Regulation (FAR)/Revolutionary FAR Overhaul (RFO) Subpart 13 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. Naval Surface Warfare Center Indian Head Division (NSWC IHD), located in Indian Head, Maryland, intends to award a firm-fixed-price (FFP) purchase order using Simplified Acquisition Procedures METAL PARTS This solicitation will be competed as a total small business set-aside. Solicitation Details Quotes are being requested under Request for Quotations (RFQ) Amendment N0017426Q11230001. The applicable North American Industry Classification System (NAICS) code is 332710 and the associated small business size standard is 500 employees. The solicitation document and incorporated provisions and clauses are those in effect through the FAR/RFO. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular (FAC) 2026-01 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20260507. Technical Drawings If interested, technical drawings/CDRLS need to be requested by contractor prior to submission date. ITAR certification is required to be provided prior to technical drawing release for review. Drawing requests/CDRLS must be made via email to latrice.t.whitfield.civ@us.navy.mil Basis for Award The Government will award a purchase order resulting from this solicitation to the responsible vendor whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The Government intends to evaluate all timely quotes received from eligible vendors on a Lowest Price Technically Acceptable (LPTA) basis. The Government intends to evaluate quotations and award a purchase order without discussion. Evaluation Factors: Technical: Quotes must reflect the required specifications and the exact brand specified in the Statement of Work. Price: Quotes must include all applicable costs, including shipping and handling. Questions and Clarifications Questions regarding this requirement must be submitted via email to latrice.t.whitfield.civ@us.navy.mil Submission Instructions Quote packages are due by Nov 13, 2026, at 10:00 AM EST. Late quotes will not be considered. Quote packages shall be sent via email to latrice.t.whitfield.civ@us.navy.mil and must contain a cover sheet that provides the following information: Official Company Name; Point of Contact (including name, email address, and phone number); and Unique Entity Identifier (UEI) and CAGE Code. | 43% | Solicitation | 11/13/2026 |
General Information This is a solicitation for non-commercial products prepared in accordance with the format in Federal Acquisition Regulation (FAR)/Revolutionary FAR Overhaul (RFO) Subpart 13 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. Naval Surface Warfare Center Indian Head Division (NSWC IHD), located in Indian Head, Maryland, intends to award a firm-fixed-price (FFP) purchase order using Simplified Acquisition Procedures for Body, Retainer, and Gasket parts. This solicitation will be competed as a total small business set-aside. Solicitation Details Quotes are being requested under Request for Quotations (RFQ) N0017426Q1120. The applicable North American Industry Classification System (NAICS) code is 332710 and the associated small business size standard is 500 employees. The solicitation document and incorporated provisions and clauses are those in effect through the FAR/RFO. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular (FAC) 2026-01 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20260507. Technical Drawings If interested, technical drawings need to be requested by contractor prior to submission date. ITAR certification is required to be provided prior to technical drawing release. Drawing requests must be made via email to deanna.l.wilson27.civ@us.navy.mil by Friday, 23 October 2026, 10:00 AM EST. Drawings will be send via DoD Safe. Cybersecurity Compliance Requirement (CMMC Level 2): For purposes of technical acceptability, the Offeror shall submit documentation verifying a current CMMC Level 2 status—either Conditional or Final, as applicable—recorded in the Supplier Performance Risk System (SPRS). If the Offeror does not possess a current CMMC Level 2 status in SPRS at the time of proposal submission, the Offeror will not be deemed technically acceptable. Basis for Award The Government will award a purchase order resulting from this solicitation to the responsible vendor whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The Government intends to evaluate all timely quotes received from eligible vendors on a Lowest Price Technically Acceptable (LPTA) basis. The Government intends to evaluate quotations and award a purchase order without discussion. Evaluation Factors: Technical: Quotes must reflect the required specifications and the exact brand specified in the Statement of Work. Price: Quotes must include all applicable costs, including shipping and handling. Questions and Clarifications Questions regarding this requirement must be submitted via email to deanna.l.wilson27.civ@us.navy.mil no later than Friday, 16 October 2026. All answers will be provided by Friday, 23 October 2026. Submission Instructions Quote packages are due by November 6th, 2026, at 10:00 AM EST. Late quotes will not be considered. Quote packages shall be sent via email to deanna.l.wilson27.civ@us.navy.mil and must contain a cover sheet that provides the following information: Official Company Name; Point of Contact (including name, email address, and phone number); and Unique Entity Identifier (UEI) and CAGE Code. | 40% | Solicitation | 11/05/2026 |
This is a SOURCES SOUGHT NOTICE, pursuant to FAR Part 10 (Market Research). This is not a pre-solicitation notice or solicitation for proposals/quotations. For information regarding this acquisition, contact the Contracting official listed herein. ALL INQUIRES SHALL BE IN WRITING. This is a repost of sources sought notice 70Z08026S16007B00. The U.S. Coast Guard is reposing this Sources Sought Notice to obtain updated market research information. Interested vendors are encouraged to review the requirements and submit current information regarding their capabilities, experience, and references. All responses will be considered for future acquisition planning. REQUIREMENT: The U.S. Coast Guard (USCG), Surface Forces Logistics Center has a requirement for the overhaul of both the Starboard (STBD) and PORT Rudders used onboard the USCG 87’ Coastal Patrol Boats Table 1 – Part List Part Number NSN Description 87 WPB 561-001 STBD 2040-01-461-1943 Starboard Rudder 87 WPB 561-001 PORT 2040-01-461-1944 PORT Rudder Overhauls shall be accomplished in accordance with Statement of Work (SOW) entitled, “Work Item 1: 2040-01-461-1943, Rudder, Starboard, Repair” and “Work Item 1: 2040-01-461-1944, Rudder, PORT, Repair.” A copy of both SOW’s is attached with this announcement as Attachment I - Statement of Work. Interested parties will be able to obtain a copy of the required drawing once the resulting solicitation has been issued. This sources sought notice is being issued to obtain information on vendors capable of performing the overhauls. All costs including packaging, marking and bar-coding in accordance with the Preservation, Packaging, Marking, and Shipping section of the SOW’s shall be incorporated in the cost of each part. Standard manufacturer warranty is required. The anticipated NAICS Code is 332710, Machine Shops, with a size standard of 500 employees. Period of Performance: It is anticipated that one, firm, fixed-price contract with one (1) Base Year and four (4) Option Periods will be awarded for this requirement. Submission of Information: If you intend to submit information/documentation on this acquisition, please respond by email to: Dana Solomon Email: Dana.D.Solomon@uscg.mil It is the responsibility of the vendor to ensure delivery of their information. Please submit your information by 3:30 p.m. Eastern Standard Time (EST) on February 18, 2026. The following information/ documentation must be included in your response: 1. A positive statement of your intention to submit a quote for the upcoming solicitation as a prime contractor, to include: a) Name of Company: b) Address: c) Website: d) System for Award Management (SAM) Unique Entity Identifier Number: e) POC Name: f) POC Phone number: g) POC Email Address: h) Business size for the applicable NAICS code, and if applicable, your small business status; 2. Subcontracting possibilities for this requirement; 3. Proof you can perform the overhauls in accordance with the SOW standards and processes; and 5. Evidence of experience in overhauling the required items to include contract numbers, project titles and dollar amounts, points of contact and telephone numbers. At least two references are requested. All of the above must be submitted in sufficient detail for a decision to be made for a small business set aside. A decision on whether this will be pursued as a small business set aside or on an unrestricted basis will be posted at www.Sam.Gov. Disclaimer and Important Notes: The submission of this data for review shall not impede award of this contract as planned. The Government does NOT intend to pay for information solicited. For information regarding this acquisition, contact the Contracting officials listed herein. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriate for this requirement. No proprietary, classified, confidential or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. Responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation. | 40% | Market Research | 02/18/2026 |
Proposed procurement for NSN 4920001403440 ADAPTER,TEST: Line 0001 Qty 7 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0169 DAYS ADO Approved sources are 072E5 178AS460; 23302 178AS460. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically. | 36% | Combined Synopsis | 11/23/2026 |
See attached RFQ PDF. Q & A Closes 11/20/2026 | 36% | Combined Synopsis | 11/30/2026 |
Additional Details
Solicitation Number
SB1341-14-RQ-0198
Archive Date
Jun 30, 2014