Individual Multispectral Camouflage (IMSC) Capability
Overview
- Response deadline
- 5:00 PM EDT
- Posted
- June 15, 2026
- Notice type
- Sources Sought
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- AMC.ACC.ACC-CTRS.ACC-APG.W6QK ACC-APG
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- SCIE_IndividualSignatureManagementCamouflageCapability_RFI
- Notice ID
- 2e0700be8ad649d7865d21d365f7b650
Description
PdM SCIE is seeking information on technologies and products related to individual signature management with a focus on providing mitigation from VIS, NIR, and LWIR sensors and a secondary focus on MWIR, Radar, and SWIR. PdM SCIE is interested in a modular system of concealment solutions that are lightweight, durable, and effective across multiple spectral bands and diverse operational environments.
Specific form factors of interest include, but are not limited to:
- Overgarment: A wearable garment designed to be worn over the standard combat uniform and equipment.
- Hide Site: An individual, and ideally modular to allow multiple connections, shelter for personnel and equipment concealment. This solution can also be multifunctional, for example also acting as a wearable poncho.
- Headcover: A solution for concealing the head and shoulders area. This can be included or separate from overgarment solutions.
- Hasty Solution: A lightweight, rapidly deployable concealment system, such as a half-ghillie/assaulters ghillie or pop-up blind, for temporary positions or quick on-the-move concealment.
- Extremity Concealment: Solutions for concealing hands, feet, and weapon systems.
- Exposed Skin: Solution for exposed skin; optional depending on capabilities and combination of solutions.
Specific environments of interest include:
- Arid/Desert
- Woodland/Jungle
- Arctic/Extreme Cold
While each form factor and intended environment may require unique performance characteristics, PdM SCIE is looking for solutions that meet these general requirements:
- Reduce probability of detection from ground and areal VIS, IR, and radar sensors. The focus should be integrating these capabilities into one technology if possible.
- Conform to existing developed target specifications on NIR & SWIR. Values can be provided with a signed NDA by emailing the POC’s listed in Section 6.0.
- Be easy to don and doff (if applicable) and not hinder Soldiers’ movement during operations.
- Be compatible with a standard fighting combat load and be fully interoperable with existing equipment. Soldiers must have a way to easily access their necessary equipment while wearing the developed kit. If they are not wearing it, they must have an easy way to carry and access it.
- Be durable through a deployment cycle and field reparable to snags or cuts.
- Be effective in a minimum of 1 operationally relevant environment (woodland/jungle, arctic/snow, and/or desert/arid).
- Not have a meaningful or degrading impact on soldier load. Any additional weight added to the soldier load must have an offset in capabilities/performance.
- Not give off audible signature that would hinder Soldiers performance/situational awareness or lead to Soldier detection.
- Be able to dry quickly as to not negatively impact signature.
- Be comfortable and breathable. The capability shall not create a negative physiological burden that detrimentally impacts Soldier performance, mobility, communication, reaction time, etc. Negative impacts on physiological burden must be greatly offset by capabilities in reducing Soldier detection.
- Consider the training necessary for Solider use along with Tactics, Techniques, and Procedures (TTPs) for best employment.
- Consider and address more holistic camouflage capabilities necessary for future threats including, but not limited to, Aided Target Recognition (AiTR), ultraviolet (UV) sensors, light detection and ranging (LiDAR), and hyperspectral imaging.
REQUESTED INFORMATION
Interested parties are requested to provide a white paper response that addresses the following areas in detail. Additionally, vendors are encouraged to utilize the 'Attachment 1 - Technical Data Matrix' (Excel format) to summarize the technical and cost specifications of each submitted capability."
A. Company Information
- Company Name, Address, Website, and Point of Contact (Name, Title, Phone, Email).
- CAGE Code and Unique Identity Number (UEI).
- Business Size and Socioeconomic Status (e.g., Small Business, Veteran-Owned, etc.).
- A brief company background, highlighting relevant experience in developing and manufacturing signature management materials or products for military application.
- A statement confirming the company's ability to comply with the Berry Amendment (10 U.S.C. 2533a).
- If the product(s) are not Berry Compliant, please submit information regarding timeline or potential capabilities to become Berry Compliant.
B. Capabilities and Technical Specifications
- Provide a detailed description of product offerings that meet the form factors listed in Section 3.0.
- Camouflage & Environment: Describe the camouflage pattern(s) available. Discuss if the technology is "pattern agnostic" and what operational environment(s) the solution is optimized for (e.g., woodland, desert, arctic) as listed in Section 3.0.
- For each product, provide technical specifications, including:
- Signature Management Performance: Provide any available, unclassified data on the performance of product materials/systems across the electromagnetic spectrum (e.g., VIS, NIR, SWIR, MWIR, LWIR, etc). Provide data on Radar performance if applicable. Please specify test methods used.
- Physical Properties: Provide data on key characteristics, including but not limited to item weight and/or material weight (oz/sq. yd.), tensile strength, tear strength, water resistance, air perm, colorfastness, Moisture Vapor Transmission Rate (MVTR), and drying rate. Please cite the test methods used (e.g., ASTM, AATCC).
- Size characteristics: Provide information on the sizes or length/width offered in each capability, weight of end item, and/or packed volume/dimensions of end item.
- Provide a Technology Readiness Level (TRL) and Manufacturing Readiness Level (MRL) for each submitted capability.
- TTPs & Training: Provide any information on TTPs and training that is unique or ensures a more successful employment of the product(s) in a field environment. This can be in the form of a card, a PPT deck, or a description of vendor given training to Soldiers, etc.
C. Manufacturing and Cost
- Production Capacity: Detail the current monthly and annual production capacity for each item described.
- Scalability: Describe the company’s ability to scale up manufacturing to meet larger procurement quantities.
- Cost:
- Provide a Rough Order of Magnitude (ROM) price for each individual item.
- Provide estimated pricing and discuss potential for economies of scale for annual procurements of 5,000, 10,000, and 20,000 units.
D. Product Demonstration Model (PDM) (Optional)
- Submission:
- Submission of Product Demonstration Models (PDMs) is optional and is not a prerequisite for a complete RFI response. Submitted PDMs will be used by PdM SCIE for internal spectral evaluation and provided to active-duty Subject Matter Experts (SMEs) for hands-on assessment/field demonstrations.
- Submission Guidelines:
- Quantity: Vendors may submit one (1) to three (3) PDMs for each capability form factor (e.g., Overgarment, Hide Site) detailed in their white paper.
- Variation: Submissions may include models in identical or varying camouflage patterns, as applicable to the capability.
- Cost: All costs associated with the PDMs, including shipping, are the sole responsibility of the vendor. PDMs are to be provided at no cost to the Government.
- Disposition: All PDMs submitted in response to this RFI will become Government property and will not be returned.
- Shipping and Labeling Instructions:
To ensure proper identification and handling, all PDM submissions must adhere to the following:
- Due Date: All PDMs must be received at the address below no later than 5:00 PM EST on 30 June 2026.
- Shipping Address:
ATTN: Austin Myhre
SFAE-GSS-SCIE
10125 Kingman Road, BDLG 317
Ft Belvoir, VA, 22060
- Exterior Labeling: The exterior of the shipping container(s) must be clearly labeled with:
- "PDM Submission in Response to RFI: [Insert RFI Number]"
- "Vendor: [Company Name]"
- Interior Labeling: Each individual PDM unit must be securely tagged or labeled with the following information:
- Company Name
- RFI Number
- Product/Model Name & Capability Form Factor (e.g., Hide Site, Overgarment)
- Camouflage Pattern Name (if applicable)
THIS IS A REQUEST FOR INFORMATION (RFI) ONLY.
This RFI is issued solely for information and planning purposes. It does not constitute a Solicitation, a Request for Proposal (RFP), or a promise to issue an RFP in the future. This RFI does not commit the Government to contract for any supply or service whatsoever. The Government is not seeking proposals and will not accept unsolicited proposals. Response to this RFI is voluntary. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. All costs associated with responding to this RFI will be solely at the interested party’s expense.All submissions become Government property and will not be returned. Not responding to this RFI does not preclude participation in any future RFP, if one is issued.
RESPONSES:
Interested parties should submit their responses electronically via e-mail to Jacqueline Young, jacqueline.e.young6.ctr@army.mil and Austin Myhre, austin.j.myhre.ctr@army.mil. Responses are due no later than the date and time specified in this announcement. Please limit responses to a maximum of 20 pages, using standard 12-point font.
Responses shall provide a courtesy copy to the Contracting Office points of contact included below.
QUESTIONS
- Any questions for clarification may be submitted via email to Jacqueline Young, jacqueline.e.young6.ctr@army.mil, and Austin Myhre, austin.j.myhre.ctr@army.mil, no later than 5 June 2026 by 5:00 p.m. EST. Verbal questions will not be accepted.,
- Questions shall not contain proprietary or classified information. An unattributed list of questions and answers will be published on SAM.gov if deemed necessary.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (1)
- Download
IMSC RFI Technical Data Matrix for Vendors.xlsx
9.2 KBAdded in Sources Sought version 1Posted
Lifecycle
- 1Version 1Sources SoughtArchived
Individual Signature Management Camouflage (IMSC) Capability
- 2Version 2Sources SoughtArchived
Individual Multispectral Camouflage (IMSC) Capability
- 3Version 3Sources SoughtArchived
Individual Multispectral Camouflage (IMSC) Capability
- 5Version 5Sources SoughtArchivedCurrent
Individual Multispectral Camouflage (IMSC) Capability
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Amended to add set aside code, PSC and NAICS. Item:Camouflage Stick - faceSalient Characteristics:Item: Camouflage Stick Salient Characteristics: Camo sticks -portable, wax-based face paint applicators used to break up the human facial outline and eliminate skin glare for hunting, military operations, and tactical. two complementary colors (e.g., light green and loam) for efficient blending. Sweat-resistant and non-glare to maintain concealment during high-activity use. | 73% | Combined Synopsis | 04/02/2026 |
Item: Camo sticksSalient Characteristics:Camo sticks - portable, wax-based face paint applicators used to break up the human facial outline and eliminate skin glare for hunting, military operations, and tactical. two complementary colors (e.g., light green and loam) for efficient blending. Sweat-resistant and non-glare to maintain concealment during high-activity use. | 73% | Combined Synopsis | 04/01/2026 |
1. This Request for Quote (RFQ) is for a Foreign Military Sales (FMS) procurement for Government of Columbia. 2. Vendors shall fill out all the green cells in RFQ Attachment 1 in accordance with the instructions within RFQ Attachment 1. NSN information is provided for reference only. Please quote the color/pattern requested in Column D. 3. Vendors shall also provide technical information that clearly shows how the product being proposed meets each of the specifications identified in the part number in column B of the RFQ Attachment 1. Note: Vendors will provide side-by-side compression for alternative materials being proposed. Please highlight, circle, or otherwise identify in your technical information provided where your product meets the specifications identified in the part number. 4. The Government anticipates utilizing price analysis to determine a fair and reasonable price of the vendors proposed unit prices in Unison Marketplace. Accordingly, the analytical techniques and procedures prescribed in FAR 15.404-1 for evaluating offeror quotes may be used singly or in combination with others as determined by the Contracting Officer based on competition and other factors to determine a fair and reasonable price. If after receipt of proposals the Contracting Officer determines that there is insufficient information available to determine a fair and reasonable price, then additional data other than certified cost or pricing data for use in evaluation may be required to be submitted by offerors upon the Governments request. 5. Basis of Award - In the event that no single offeror proposes all items, or no offeror proposes a fair and reasonable price on all items, the Government may make multiple awards to different offerors for portions of an individual FMS case. In this event, awards may be made to multiple offerors representing the Lowest Price Technically Acceptable (LPTA) fair and reasonable proposal for those items they proposed. To be eligible for award the vendors shall meet 2 and 3 above as well as its price be deemed fair and reasonable in accordance with number 4 above. The winning vendor will be the Lowest Price Technically Acceptable (in Unison Marketplace). Only ONE (1) quote will be acceptable. Please do not provide multiple options. 6. The Government intends to make award based on the initial quote submissions without asking questions or requesting revisions. Therefore, each offer should contain the Offeror's best terms from a price and technical standpoint. However, the Government reserves the right to ask questions at any time during the evaluation of quotes, if it is determined to be in the best interest of the Government. Questions may be asked of some, all, or none of the Offerors to enhance Government understanding of quotes; allow reasonable interpretation of the quote; or facilitate the Government's evaluation process. 7. Please note information provided in vendors proposed RFQ Spreadsheet is subject to incorporation into the awarded call. 8. Wide Area Workflow (WAWF) & shipping instructions will be given at time of award of the respective Calls. 9. Country will accept partial shipments. Drop shipments are not permitted, the vendor shall provide one (1) shipping address to be used for all items in RFQ Spreadsheet. Material must be made available for pick up within the continental U.S. 10. The award of these calls is subject to the availability of funds. The Government reserves the right to cancel this requirement without incurring any proposal fees. 11. Please submit any questions via email to Unison Marketplace by 05 November 2026 and your proposals to Unison Marketplace via by 1:00 PM (EST) on 13 November 2026. ( https://usg01.safelinks.protection.office365.us/?url=https%3A%2F%2Fmarketplace.unisonglobal.com%2Ffbweb%2FfbobuyDetails.do%3Ftoken%3DolwZ14zRF3134gls5qROoJutQ5sKd3h3qwUoQyIUgYFSCc2h%252FrlGFWI%253D&data=05%7C02%7Cjason.h.goode.civ%40army.mil%7Cf1c2cacf0250493a0b2408df338d6ba7%7Cfae6d70f954b481192b60530d6f84c43%7C0%7C0%7C639286354620870013%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=bF7NoLHWP2ff8yhpZe7MfQNS4%2BuSOhD6doMQ9nLq0pg%3D&reserved=0 ) | 60% | Market Research | 11/13/2026 |
The Mission and Installation Contracting Command Installation Contracting Office, West Point, NY (MICC-West Point) is issuing this SOLICITATION Breast & Waist Plates (FINAL COPY IN QUEUE) at West Point, NY. The estimated delivery will be for March 2027 (est). This requirement will be a 100% set aside for total Small Business concerns. The NAICS code 332313 - Plate Work Manufacturing, size standard is 750 Employees. Please verify that both the UEI #, CAGE Code, and System for Award Management (SAM) profile are current and valid in SAM. Offerors are reminded to carefully review all attached solicitation documents issued as criteria is stated in the solicitation and shall govern. The solicitation will be issued on or about the week of November 02, 2026, in electronic format only and will be available on the internet at: https://www.sam. In order to be considered, samples are required.- SAMPLES MUST BE RECEIVED BY THE GOVERNMENT BEFORE THE CLOSE OF THE SOLICITATION. It is the offeror’s responsibility to check the https://www.sam/ website provided as necessary for details, instruction, and any posted changes. It is the offeror’s responsibility to carefully review all specifications, technical data, and attachments posted on SAM.gov Quotes, Samples--Courrier Tracking Number, and additional supporting documentations must be submitted via email to Ignacio J. Cordova, ignacio.j.cordova2.civ@army.mil, and received by the government on or before the close date noted in the solicitation. | 52% | Solicitation | 11/18/2026 |
The Mission and Installation Contracting Command Installation Contracting Office, West Point, NY (MICC-West Point) is issuing this SYNOPSIS Breast & Waist Plates at West Point, NY. The estimated delivery will be for March 2027 (est). This requirement will be a 100% set aside for total Small Business concerns. The NAICS code 332313 - Plate Work Manufacturing, size standard is 750 Employees. Please verify that both the UEI #, CAGE Code, and System for Award Management (SAM) profile are current and valid in SAM. Offerors are reminded to carefully review all attached solicitation documents issued as criteria is stated in the solicitation and shall govern. The government intends to issue a solicitation on or about the week of November 02, 2026, in electronic format only and will be available on the internet at: https://www.sam.gov. In order to be considered, samples are required. It is the offeror’s responsibility to check the https://www.sam.gov website provided as necessary for details, instruction, and any posted changes. It is the offeror’s responsibility to carefully review all specifications, technical data, and attachments posted on SAM.gov Quotes, samples, and additional supporting documentations must be submitted via email to Ignacio J. Cordova, ignacio.j.cordova2.civ@army.mil, and received by the government on or before the close date noted in the solicitation. | 52% | Special Notice | 11/17/2026 |
Additional Details
Solicitation Number
SCIE_IndividualSignatureManagementCamouflageCapability_RFI
Archive Date
Jul 15, 2026
Office Address
ABERDEEN PROVING GROU, MD, 21005-5001