GovChime
Notice ID: d68bd3443a6f42ef99d1c8167344075aSolicitationArchived

Water Particle Counter

Archived on April 11, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM PDT
Posted
March 20, 2026
Notice type
Solicitation
NAICS
NAICS 33399 All Other General Purpose Machinery Manufacturing (reported as 333990)
Agency
Department of Energy

Notice details

Office
SLAC Natl Accel Lab -DOE Contractor
Place of performance
Menlo Park, California, 94025
Last updated
Nov 2, 2026
First published
Last updated on SAM.gov

Identifiers

Notice ID
d68bd3443a6f42ef99d1c8167344075a

Description

SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions.

Please review the listed requirements and provide your best and final offer for both price and lead-time.

The follow has been attached for you to complete and review:

  1. (BAA) Buy American Act Certification
  2. Representations & Certifications Rider
  3. Confirm Attached SLAC terms are accepted: FP Commercial Supplies-Services T&Cs (August 2023)

Required item(s) listed below:

  1. UDI20+ water particle counter- Detection down to 0.02 Micron (20nm) – QTY: 1

Quote is for product only; no on-site services permitted.

Source selection will be based on Lowest Price and Technically Acceptable Method (LPTA).

Technical evaluation criteria are as follows:

1. The instrument shall be capable of detecting particles with a minimum size of 20 nm.

2. The tool shall contain at least four particle size channels at 20 nm, 50 nm, 70 nm, and 100 nm.

3. The system shall operate at a nominal sample flow rate of 75 mL/min ±10%

4. The instrument shall provide 100% counting efficiency of the sampled volume, ensuring accurate particle detection

5. The tool shall maintain a zero-count level of ≤ 50 counts per liter to ensure minimal background noise during measurements.

6. The particle counter shall operate with a maximum system pressure of up to 100 psi.

7. The tool shall accept the sample temperature range of 15–50 °C

8. The tool’s operating environment temperature is 18–29 °C to ensure measurement stability.

9. The system supports Ethernet communication and 4–20 mA analog outputs for data transmission and system integration.

10. The instrument provides five analog outputs via 4–20 mA signals, including four particle channels and one instrument status output.

11. The instrument requires 100–240 V AC power at 50–60 Hz for operation.

12. The lead time of this tool shall be 60 days or less after ARO.

13. The Vendor shall provide local support.

14. The Vendor Has conducted UPW business for more than 5 years.

15. The Vendor shall provide all new items. Prototypes, one-off systems, demonstration models, used or refurbished instruments will not be considered for award.

Please provide a price and lead time quotation by COB 3/24/2026.

Please be advised that the requirement was also posted on SAM.gov.

Send quote to marissat@SLAC.stanford.edu.

The bid closing date for this requirement is 3/24/2026.

Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions?

If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted.

  • Buy American Act Certification (BAA) applies to items that have a unit price that is over $15,000.
  • Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return.
  • Please include in your proposals the Harmonized Tariff Schedule (HTS Code) if applicable.
  • All subcontractors are required to register in the System for Award Management (www.sam.gov).
  • The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) will be made a part of the resulting order.
  • Payment Terms will be NET-30 (SLAC is unable to do advance payments and or Prepayments).
  • Freight terms will be FOB Destination Prepaid and Add
  • Foreign Vendors Shipments will be made CIP SLAC, Menlo Park, and Duty Unpaid. 

You are requested to mark and identify proprietary/confidential information provided in response to the solicitation.

Contact me directly with any questions.

Kind regards,

Marissa Tanomrat

Procurement Commodities Team

SLAC National Accelerator Laboratory

2575 Sand Hill Road

Menlo Park, CA 94025

Email: marissat@slac.stanford.edu

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (3)

  • Reps and certs Rider - September 2022.pdf

    983 KBAdded in Solicitation version 3Posted
    Download
  • Fixed_Price_Commercial_Supplies_and_Services_Subcontract_Aug2023.pdf

    325 KBAdded in Solicitation version 3Posted
    Download
  • 01. BAA_Certification_08.29.2023_(D5) (1).pdf

    570 KBAdded in Solicitation version 3Posted
    Download

Lifecycle

  1. 3
    Version 3SolicitationArchivedCurrent

    Water Particle Counter

    Notice d68bd3443a6f42ef99d1c8167344075a on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. AMENDMENT 01 Hi, The following Addendum is being issued for the subject Request for Quotation: 368931_DispersiveMirror_SAMPOST Clarification Questions: Yes a brand Name or Equal product would be acceptable. Certain manufacturers designate the primary HR/GDD coating on S2 rather than S1, while maintaining the specified S1 surface quality (5/3 × 0.04) and flatness (PV < &lambda;/10). Would this configuration be considered technically acceptable, provided the optic meets all other specified performance and dimensional requirements? As long as the HR side meets requirements, then yes. Angle of Incidence (AOI): Would an optic specified for an operating AOI range of 5°–6° satisfy the stated 5° AOI requirement? Yes, 5 degrees acceptable. Please provide a price and lead time quotation by COB 11/9/2026. This Addendum modifies the Request for Quotation and must be acknowledged. Failure to acknowledge all addenda could make your proposal non-responsive. Please confirm that the submitted proposal is not changed because of this addendum. If proposal sent is revised because of this, please submit the revised proposal. The following changes are hereby made to the appropriate documents containing the above-mentioned Request for Quotation (RFQ). All other terms and conditions of the RFQ remain the same. Kind regards, Marissa Tanomrat Procurement Commodities Team SLAC National Accelerator Laboratory 2575 Sand Hill Road Menlo Park, CA 94025 Email: marissat@slac.stanford.edu Please review the listed requirements and provide your best and final offer for both price and lead-time. The follow has been attached for you to complete and review: Representations & Certifications Rider Confirm Attached SLAC terms are accepted: FP Commercial Supplies-Services T&Cs (August 2023) Confirm Attached SLAC terms are accepted: SLAC General Terms and Conditions Supplemental Rider (Rev. August 2026) Request for Quote: Required item(s) listed below: HD120+AR Ultra Precision (FS 38.1mm dia. X 12.7mm thk. Pl (192)) QTY: 150 CM2699 (FS 38.1mm dia. X12.7mm thk,PL (192) QTY: 80 Quote is for product only; no on-site services permitted. Source selection will be based on Lowest Price and Technically Acceptable Method (LPTA). Technical evaluation criteria are as follows: Highly Dispersive Mirrors HD120+AR Ultra Precision (FS 38.1mm dia. X 12.7mm thk. Pl (192)) Features: Optics Type: Highly Dispersive Mirror Design Name: HD120 Central Wavelength CW (nm): 1030 Minimal Wavelength WLmin (nm): 935 Maximal Wavelength WLmax (nm): 1125 GDDr (fs²): -200 Angle of Incidence AOI (deg): 5 Minimal Reflectance Rmin (%): 99.9 Polarization: p Surface 2: AR Stress Compensation Substrate (pre-coat spec.) Material: Corning 7980 0F Dimensions: 38.1mm dia. x 12.7mm thk. Diameter tolerance: +0/-0.1mm Thickness tolerance: +/-0.1mm Configuration: Pl/Pl Radius: S1&S2: Infinity S1 & S2 polished, other surfaces fine ground Surface quality: S1: 5/3x0.04, S2: Commercial polish Flatness: S1: PV<1/10L@632.8nm within CA, S2 NA Clear aperture: >80% Parallelism: <10arcmin Chamfer: Break sharp edges Standard: ISO 10110 Marking: UFI log and arrow to S1, 6-digit serial number tracked Qty 150. Chirped mirrors: CM2699 (FS 38.1mm dia. x 12.7mm thk. Pl (192)) Features: Optics Type: Chirped Mirror Design Name: CM2699 Central Wavelength CW (nm): 1035 Minimal Wavelength WLmin (nm): 950 Maximal Wavelength WLmax (nm): 1120 GDDr (fs²): -50 Minimal Reflectance in Average Raver,min (%): 99.9 Angle of Incidence AOI (deg): 5 Polarization: p Surface 2: AR Stress Compensation Substrate (pre-coat spec.) Material: Corning 7980 0F Dimensions: 38.1mm dia. x 12.7mm thk. Diameter tolerance: +0/-0.1mm Thickness tolerance: +/-0.1mm Configuration: Pl/Pl Radius: S1&S2: Infinity S1 & S2 polished, other surfaces fine ground Surface quality: S1: 5/3x0.04, S2: Commercial polish Flatness: S1: PV<1/10L@632.8nm within CA, S2 NA Clear aperture: >80% Parallelism: <10arcmin Chamfer: Break sharp edges Standard: ISO 10110 Marking: UFI log and arrow to S1, 6-digit serial number tracked Qty 80 Past performance: The Offeror will be evaluated for successful completion and delivery of parts of a similar size and complexity in the last four (4) years based on the documentation submitted on prior manufacturing and test plans. SLAC will consider the historical reliability and performance of such parts integration into SLAC systems, if available. Manufacturing capabilities and capacity (including lower-tier subcontractors) Offeror shall submit a manufacturing plan demonstrating that the Offeror’s resources and project management support are adequate to deliver the system on schedule, using a quality-controlled manufacturing process, adequate procurement capabilities, fabrication facilities and testing facilities. Please provide a price and lead time quotation by COB 11/5/2026 Please be advised that the requirement was also posted on SAM.gov. Send quote to marissat@SLAC.stanford.edu. Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions? If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted. Buy American Act Certification (BAA) applies to items that have a unit price that is over $15,000. Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return. Please include in your proposals the Harmonized Tariff Schedule (HTS Code) & ECCN if applicable. All subcontractors are required to register in the System for Award Management (www.sam.gov). The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) and SLAC General Terms and Conditions Supplemental Rider (Rev. August 2026) will be made a part of the resulting order. Please mark up terms and conditions if you wish to negotiate. No mark ups mean that you accept SLAC Terms and Conditions. Payment Terms will be NET-30 (SLAC is unable to make advance payments and or Prepayments). For Small Business, SLAC offers Net 15. Freight terms will be FOB Destination Prepaid and Add Foreign Vendors Shipments will be made CIP SLAC, Menlo Park, and Duty Unpaid. You are requested to mark and identify proprietary/confidential information provided in response to the solicitation. Contact me directly with any questions. Kind regards, Marissa Tanomrat Procurement Commodities Team SLAC National Accelerator Laboratory 2575 Sand Hill Road Menlo Park, CA 94025 Email: marissat@slac.stanford.edu
51%
Solicitation11/05/2026
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. AMENDMENT 01 The following addendum is issued for Request for Quotation: 369006_X-Ray_Imaging_Detector_System. This amendment provides answers to supplier questions and clarifies the technical requirements and competition basis. This amendment must be acknowledged. Failure to acknowledge all amendments may make a proposal non-responsive. Suppliers shall confirm whether their previously submitted proposal remains unchanged. If the clarification results in a change, please submit a revised proposal. All other terms and conditions of the Request for Quotation remain unchanged. Supplier Questions and SLAC Responses 1. Is the detector intended for an industrial application or for research use, specifically X-ray diffraction? SLAC Response: The detector is intended for X-ray diffraction research. 2. Is this purchase replacing an existing detector? If yes, please provide the current detector model and original serial number so suppliers can confirm compatibility. SLAC Response: This purchase is not replacing an existing detector. However, part of the detector's purpose is to serve as a direct backup for LCLS, as needed, to reduce the risk of beamtime loss. The detector currently integrated for this application is the Varex XRD 4343CT-F22-C-000 Imaging Grade detector. 3. The solicitation states that the detector must be applicable for hard and high-energy X-ray diffraction greater than 20 keV. What operating energy range and shielding level are required for the intended application? SLAC Response: The required operating energy range is at least 20-100 kV. Shielding will be provided by the beamline. The detector window-to-sensor path must be non-metal. 4. Will SLAC consider an alternative detector with a 35 cm x 43 cm active area, rather than the stated minimum active area of 40 cm x 40 cm, if the remaining technical requirements are met? SLAC Response: No. Square geometry is required because of the diffraction-ring application, and the smaller detector dimension defines the usable area. The detector must also be a flat panel with a narrow depth of less than 10 cm due to space constraints, and the total weight must be less than 15 kg. 5. Will SLAC consider equivalent products from alternative manufacturers, provided the proposed product meets all technical requirements? SLAC Response: Not considered 6. Is the procurement a Small Business Set-Aside, or is it full and open competition? SLAC Response: This procurement is open competition and is not a Small Business Set-Aside. The follow has been attached for you to complete and review: Requested for Quote: Please provide a price and lead time quotation by 10/30/2026. Technical Evaluation Factors Listed Below: Applicable for hard and high-energy X-ray diffraction greater than 20 keV. Minimum active area of 40 cm x 40 cm. 150 micron pixel size. Amorphous silicon sensor. Flat-panel detector configuration. Required item(s) are listed below: XRD 4343CT-F22-C-000 Imaging Grade digital X-ray detector Quantity: 1 EA XRD-EPS 215W power supply Quantity: 1 EA XRD-EP AC cable Quantity: 1 EA XRD-EPS-B2 DC cable, 50 ft / 15.25 m Quantity: 1 EA XRD-FGX extension cable, 50 ft / 15.25 m Quantity: 1 EA XRD FG(E) OPTO - PCIe Frame Grabber V4 Quantity: 1 EA XRD-FGX-PC connection cable, 25 ft / 7.6 m Quantity: 1 EA Quote is for product only; no on-site services permitted. Source selection will be based on Lowest Priced Technically Acceptable Method and best Lead-Time. Please provide a price and lead time quotation by 10/16/2026. Send quote to Cheryl.stafford@slac.stanford.edu. Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions? Buy American Act Certification (BAA) applies to awards over $15,000 unit price. Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return. Please include in your proposals the Harmonized Tariff Schedule (HTS Code) & Export Control Classification Number (ECCN) if applicable. Please state whether duties or tariffs are included in or excluded from the quoted price. All subcontractors are required to register in the System for Award Management (www.sam.gov). If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted. The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) as well as the SLAC General Terms and Conditions Supplemental Rider (Aug2026_Rev1) will be made a part of the resulting order. Please markup terms and conditions if you wish to negotiate. No mark ups mean that you accept SLAC Terms and Conditions. Payment Terms will be NET-30 Domestic Suppliers - Freight terms will be FOB Destination Prepaid and Add. Foreign Supplier - Shipment will be made CIP SLAC, Menlo Park, and Duty Unpaid. You are requested to mark and identify proprietary/confidential information provided in response to the solicitation. Contact me directly with any questions. Kind Regards, Cheryl Stafford cheryl.stafford@slac.stanford.edu
43%
Solicitation10/30/2026
The DLA-Aviation is issuing this source sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for two (2) separate, independent, and equal-sized new Plastic Media Blast (PMB) booths. THIS SOURCES SOUGHT IS FOR INFORMATION PURPOSES ONLY. THIS IS NOT A REQUEST FOR QUOTE/PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNIAL DESCRIPTION IS STRICTLY VOLUNTARY. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions. Submission Instructions: Interested parties should submit a response to this Sources Sought Notice by November 19, 2026, NLT 11:59 pm EST. Responses should not exceed ten (10) one-sided 8.5 x 10-inch pages with a font that is no smaller than 10 point as this is not a request for a proposal but only a request for submission of a vendor's capability to fulfil this requirement. All responses must include notice ID in email header. Place of performance is FLEET READINESS CENTER SOUTHWEST (FRCSW) North Island California. DLA Aviation is requesting industry input into the feasibility of the government’s requirements. In your response, please provide: Description of your company’s capabilities, based on the questions below Comments on the attached statement of work. Please identify on the attached statement of work if your company can provide the requirement as written or propose an alternative solution. Please identify your company’s business size in terms of number of employees, and whether domestic or foreign for consideration of solicitation set-aside, and small business subcontracting requirements. Please identify your company’s manufacturer status: Manufacturer/Non-Manufacturing Source. If non-manufacturing source, please identify the manufacturer. Please identify whether your company will partner with subcontractors to complete this requirement. Please provide a basis of estimate to consider the total financial budget of this requirement. Estimates should capture the total procurement requirements, not solely the machine’s requirements. For simplicity, the estimate should be broken out as follows and just needs a total cost for each area: Machine Cost to meet requirements (do not have to line item or provide options packages) Training Tech Data - Manuals and drawings Installation Cost Foundation Work Cost to remove equipment currently in the install location Shipping Draft purchase description is attached. Please comment on the draft purchase description of whether the current characteristics are achievable, or whether the Government should consider an alternative that is commercially available.
38%
Market Research11/19/2026
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. SLAC National Accelerator Laboratory invites interested vendors to submit a proposal in accordance with the attached RFP preparation requirements for Site-wide Crane Inspection & Troubleshooting Services. Requests for clarification must be returned by Tuesday, November 10, 2026. Your full proposal must be received no later than Tuesday, November 17, 2026. SLAC has a requirement for a U.S. domestic end source for the following: Attached RFP_367827(RE)_Crane_Inspection NOTE: The following documents are attached to this solicitation RFP-367827(RE)_Crane_Inspection.zip Must complete and return all documentation in the cover letter Please provide required documentation to the attention of Ryan Enos.
35%
Combined Synopsis11/17/2026

Additional Details

Solicitation Number

SLAC_363160_WaterParticleCounter

Archive Date

Apr 11, 2026

Office Address

Menlo Park, CA, 94025