Oscilloscope

SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions.

Please review the listed requirements and provide your best and final offer for both price and lead-time.

The follow has been attached for you to complete and review:

1. (BAA) Buy American Act Certification
2. Representations & Certifications Rider
3. Confirm Attached SLAC terms are accepted: FP Commercial Supplies-Services T&Cs (August 2023)

Required item(s) listed below: Brand Name or Equal to: 

1. RTP164B High-performance oscilloscope R&S®RTP with                                                          Qty: 1

16/8 GHz bandwidth and 40/20

1. RTP-B6 Arbitrary Waveform and Pattern Generator                                                                      Qty: 1

with 14 bit resolution

1. RTP-B7 Differential 16 GHz pulse source for frequency                                                              Qty: 1

response characterication of systems for deembedding

1. RTP-ALLSI Signal-integrity-debugging bundle ALL. Includes:                                                    Qty: 1
   1. RTP-K19: Zone trigger
   2. RTP-K121: Deembedding base option real-time extension of deembedding

option RTP-K121 (RTP-K122),

1. 1. RTP-K126: Embedding & Equalization
   2. RTP-K126: Embedding & Equalization
   3. RTP-K134: Advanced Jitter & Noise
   4. RTP-K135: PAM-N Analysis
   5. RTP-K137: 16Gbps Advanced Eye
   6. RTP-K141: 16 Gbps highspeed serial pattern trigger
2. RT-ZA17 Matched pair SMA cable                                                                                                          Qty: 1
3. RT-ZM160 16 GHz modular probe amplifier, MultiMode for

differential, single-ended and common mode,1.2m cable, 400kOhm                                 Qty: 1

1. RT-ZMA14 16 GHz tip-cable flex connect, solder-in, length 15 cm,                                       Qty: 1

MultiMode compatible, includes 10 solder-in tips

1. RT-ZMA30 16 GHz browser module, variable span 0.5 mm - 8 mm,                                      Qty: 1

spring-loaded

Quote is for product only; no on-site services permitted.

Source selection will be based on Lowest Price and Technically Acceptable Method (LPTA).

Technical evaluation criteria are as follows:

1. 1. 1. 1. Oscilloscope bandwidth ≥16 GHz (2 ch) / ≥8 GHz (4 ch); sample rate ≥40/20 GSa/s; memory ≥100 Mpts/ch; vertical resolution ≥16 bit HD mode
         2. Acquisition rate ≥750,000 wfms/s; hardware real-time deembedding at full acq. rate; digital trigger ≥16 GHz full BW
         3. Integrated AWG: ≥14-bit resolution, ≥2 channels, pattern generator ≥8-bit, AM/FM/ASK/FSK modulation, CSV/trace import
         4. Differential pulse source ≥16 GHz BW, rise time ≤22 ps, SE+Diff output, 50/100 Ω, 2.92 mm connectors, w/ accessories
         5. SI bundle ALL: zone trigger, deembedding (K121/K122), embedding/EQ (K126), adv. jitter/noise (K134), PAM-N (K135), 16 Gbps eye (K137), 16 Gbps pattern trigger w/ CDR (K141)
         6. Matched SMA cable pair ≥16 GHz; phase-matched for differential TDR/TDT calibration
         7. Modular probe amplifier ≥16 GHz, MultiMode (Diff/CM/SE-P/SE-N), ≥400 kΩ diff input, ±16 V offset, ProbeMeter ≤0.05%; solder-in tip cable ≥16 GHz, 15 cm, MultiMode, incl. 10 tips
         8. Browser module ≥16 GHz, variable span 0.5–8 mm, spring-loaded pins, incl. replaceable resistor tips
         9. Warranty ≥3 years (proffered) ≥1 year (required)
         10. Include factory calibration certificate
         11. Delivery lead time ≤12 weeks ARO
         12. Authorized R&S dealer or OEM direct.
         13. Software/firmware updates ≥1 year included.

Please provide a price and lead time quotation by COB 5/18/2026.

Please be advised that the requirement was also posted on SAM.gov.

Send quote to marissat@SLAC.stanford.edu.

Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions?

If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted.

• Buy American Act Certification (BAA) applies to items that have a unit price that is over $15,000.
• Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return.
• Please include in your proposals the Harmonized Tariff Schedule (HTS Code) if applicable.
• All subcontractors are required to register in the System for Award Management (www.sam.gov).
• The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) will be made a part of the resulting order.
• Payment Terms will be NET-30 (SLAC is unable to do advance payments and or Prepayments).
• Freight terms will be FOB Destination Prepaid and Add
• Foreign Vendors Shipments will be made CIP SLAC, Menlo Park, and Duty Unpaid. 

You are requested to mark and identify proprietary/confidential information provided in response to the solicitation.

Contact me directly with any questions.

Kind regards,

Marissa Tanomrat

Procurement Commodities Team

SLAC National Accelerator Laboratory

2575 Sand Hill Road

Menlo Park, CA 94025

Email: marissat@slac.stanford.edu