XY Manipulator flanges
Archived on June 12, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM PDT
- Posted
- May 21, 2026
- Notice type
- Solicitation
- NAICS
- NAICS 3333 Commercial and Service Industry Machinery Manufacturing (reported as 333300)
- Agency
- Department of Energy
Notice details
- Office
- SLAC Natl Accel Lab -DOE Contractor
- Place of performance
- Menlo Park, California, 94025
- PSC
- AJ12: R&D- GENERAL SCIENCE/TECHNOLOGY: PHYSICAL SCIENCES (APPLIED RESEARCH/EXPLORATORY DEVELOPMENT)
- Last updated
- Oct 30, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- SLAC_365674_XYManipulatorFlanges
- Notice ID
- 9df3acf776d94fa487dc93c7dcee855b
Description
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions.
The following is attached for you to complete and review:
2.) Reps & Certs
3.) FP Commercial Supplies-Services T&C’s ( August 2023 )
4.) Buy American Act (BAA)
Requested for Quote:
Technical Specifications listed below:
TECHNICAL REQUIREMENTS FOR XY STAGE:
UHV STAGE
- XY Manipulator on 8" (CF150) flanges
- +/-2.0" (50 mm) travel
- 6.00" (150 mm) clear ID
- Top flange tapped inch
- Bottom flange tapped inch
- Stepper drive with limit switches (4 wire motor, requires drive and controller)
- Renishaw Asbsolute Encoders X and Y 9 pin D type plug, standard 2m cables LA11DCA13BKA20DAOO
TECHNICAL REQUIREMENTS FOR Z STAGE:
UHV STAGE
- Z translator with 6 inch (CF100) traveling flange
- 4.00 inch (10mm) clear ID
- 8 inch (200mm) travel
- 6.00 CF top flange, tapped inch
- 6.00 CF Bottom Flange with clearance holes
- Stepper motor drive, top (inline) mounted, with gear reducer, with limit switches (4 wire motor, requires drive and controller
- Inch scale
- Renishaw Asbsolute Encoder Z Axis 9 pin D type plug, standard 2m cable LA11DCA13BKA20DAOO
TECHNICAL REQUIREMENTS FOR ROTATION STAGE:
- Differentially-pumped Rotary Platform for 4.5" (CF63) flanges, with 2.87" (73 mm) clear ID and fine adjustment worm drive.
- Top flange half nipple TAPPED Inch Align FLUSH with RESA Ring
- Bottom flange tapped inch
- Stepper motor drive (4-wire motor, requires drive and controller)
- Renishaw RESOLUTE Absolute Optical Encoder RESA Ring- One Piece stainless ring, true absolute scale
Required item(s) are listed below:
XY Manipulator on 8" (CF150) flanges, top flange tilt
Quantity: 1
Z translator with 6 inch
Quantity: 1
Differentially-pumped Rotary Platform for 4.5".. Align FLUSH with RESA Ring
Quantity: 1
Quote is for product only; no on-site services permitted.
Source selection will be based on Lowest Priced Method and best Lead-Time.
Please provide a price and lead time quotation by 5/28/2026.
Send quote to Jhamieb@SLAC.stanford.edu.
Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions?
Buy American Act Certification (BAA) applies to awards over $15,000 unit price.
Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return.
Please include in your proposals the Harmonized Tariff Schedule (HTS Code) if applicable.
All subcontractors are required to register in the System for Award Management (www.sam.gov).
If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted.
The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) will be made a part of the resulting order. Please mark up terms and conditions if you wish to negotiate. No mark ups mean that you accept SLAC Terms and Conditions.
Payment Terms will be NET-15 – SLAC is offering small businesses NET 15 - ___McAllister Technical Services Inc_____is considered a small business.
Domestic Suppliers - Freight terms will be FOB Destination Prepaid and Add.
Foregin Supplier - Shipment will be made CIP SLAC, Menlo Park, and Duty Unpaid.
You are requested to mark and identify proprietary/confidential information provided in response to the solicitation.
Contact me directly with any questions.
Kind Regards,
Jhamie Serena
Procurement Commodities Team
SLAC National Accelerator Laboratory
2575 Sand Hill Road Menlo Park, CA 94025
P- 650-926-2201
Award Overview
Contacts
Contracting Officer
Primary Contact
Documents
Files (3)
- Download
Fixed_Price_Commercial_Supplies_and_Services_Subcontract_Aug2023.pdf
325 KBAdded in Solicitation version 3Posted - Download
Reps and certs Rider - September 2022.pdf
983 KBAdded in Solicitation version 3Posted - Download
01. BAA_Certification_08.29.2023_(D5) (1).pdf
570 KBAdded in Solicitation version 3Posted
Lifecycle
- 3Version 3SolicitationArchivedCurrent
XY Manipulator flanges
Similar Opportunities
Additional Details
Solicitation Number
SLAC_365674_XYManipulatorFlanges
Archive Date
Jun 12, 2026
Office Address
Menlo Park, CA, 94025