GovChime
Notice ID: 61c2514baac7455fbcd27058bba4eed7Solicitation

LabTech Lab Furniture and Fume Hood Solicitation

Archived on May 3, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM UTC−04:00
Posted
April 3, 2024
Notice type
Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
Department of WarDEFENSE LOGISTICS AGENCY

Notice details

Office
DCSO-COLUMBUS-DIVISION-2
Place of performance
Columbus, OH, 43213
Last updated
Dec 4, 2025

Identifiers

Solicitation number
SP470624Q0010
Notice ID
61c2514baac7455fbcd27058bba4eed7

Description

Title: LabTech Lab Furniture and Fume Hood Solicitation PLEASE SEE ATTACHED SOLICITATION (SF1449) for full details and to provide quote. BRIEF DESCRIPTION: This is a Brand Name or Equal requirement for LabTech Metallurgical Lab Furniture and Fume Hood Replacement. The contractor shall provide all labor, tools, transportation, supplies, supervision, assembly, etc. (except as noted), necessary to provide laboratory grade furniture, and fume/vapor hood replacement to the Supply Center Columbus (DSCC), DLA Land and Maritime, Product Test Center Division, Metallurgical Lab, Columbus, Ohio. The individual deliverables with their quantities and part numbers are listed in Section C, subsection 7 of the performance work statement in the attached solicitation. The deliverables must meet the following salient characteristics: a. Base, legs, backs, cabinets, cases, tabletops, and frames shall be constructed of heavy gage steel with at least 18-20 gage thickness. b. Surfaces shall have a protective coating to prevent against rust and be chemical resistant. c. Standing and counter heights should be standard 35 high x 22' deep. d. Acids/Corrosive/Flammable storage cabinets shall be of reinforced steel and coated to prevent corrosion with a standard height of 35 high x 22 deep. e. Wall cases are to have a minimum of two shelves, glass framed, hinged, and constructed of heavy gage steel with at least 18-20 gage thickness. f. Fume Hood must meet Industry ASHRAE 110, and OSHA Standards, 1910.1003. g. Fume Hood selected must be of an Airfoil Bypass design. h. Fume Hood's air fl?ow shall be at minimum of 75 feet Per Minute at Face Velocity. (DLA Industrial Hygienists will be required to test once installation is complete). i. Selected Fume Hood must be able to adapt to current air blower configuration. (DLA facilities will be consulted prior to finalizing for connecting to existing vents). j. Selected Fume Hood must be able to provide switching for lights and blower. k. Selected Fume Hood must be able to be configured for at minimum 16x12x8 drop-in sink. l. Tabletop for fume hood shall be black in color and be chemical resistant. m. Chairs shall be composed of vinyl, spring tension adjustable, nylon bases, nylon casters with foot rings. PLEASE SEE ATTACHED SOLICITATION (SF1449) for full details and to provide quote.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:SP470624Q0010
  1. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. SolicitationCurrentApr 3, 2024

    LabTech Lab Furniture and Fume Hood Solicitation

    Notice 61c2514baac7455fbcd27058bba4eed7 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

SP470624Q0010

Archive Date

May 3, 2024

Office Address

COLUMBUS, OH, 43218