GovChime
Notice ID: 93e7a6c63ddc4f059bdeb2f0a9b9abc5Award NoticeAwardedArchived

66--Laboratory Equipment and Supplies

Awarded on July 14, 2025. Full description on SAM.gov.

Awarded tounder SP470625P0007 (source: SAM.gov award notice)• $138.8K

Overview

Posted
July 14, 2025
Notice type
Award Notice
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
Department of WarDEFENSE LOGISTICS AGENCY

Notice details

Office
DCSO-COLUMBUS-DIVISION-2
Place of performance
Philadelphia, 19111
PSC
66: INSTRUMENTS AND LABORATORY EQPT
Last updated
Nov 11, 2026
First published
Last updated on SAM.gov
Award date
Jul 14, 2025
Award amount (SAM.gov award notice)
$138.8K

Identifiers

Solicitation number
SP470625Q0011
Notice ID
93e7a6c63ddc4f059bdeb2f0a9b9abc5
Award number (PIID)
SP470625P0007

Description

IMPORTANT: This posting is a pre-solicitation notice only for an upcoming solicitation. No response is necessary. A formal solicitation, which will be open to quotes/responses, will be posted at a later time. Instrument Technical Specifications The instrument should be a dual fluid channel system capable of running two analyses simultaneously using on or more auto samplers. The system must be capable OF INTERFACE WITH CONDUCTIVITY, US/Vis, and/or amperometric detectors. The system must offer additional upgrade modules to accommodate multiple configurations and sample preparations. The system shall not require gas supplies. Eluent concentrates must be commercially available and cannot be proprietary. The instrument systems housing must provide access to the fluidic connections and components. It must all allow for easy visual monitoring through a large, transparent door. The completed flow path should be metal-=free and preinstalled from the factory. The systems should be equipped with a pump, column suppressor, detector, purge valve, leak detector, six port injection valve, pulsation dampener, and have the ability to be degas the eluent sample. The systems pump shall have a dual piston with two valves and flow-range-optimized intelligent pump head which has up to 20ml/min flow rate, a flow accuracy with <0.1% deviation from the set valve, and a flow increment of 0.001ml/min. The conductivity detector shall be an intelligent, high-performance conductance detector incorporated as an integral part of the instrument system offering digital signal processing technology (DSP) with the following specifications. Measuring range or 0 to 15000 S/cm Temperature stability <0.001 oC and temperature range 20 to 50 oC in increments of 5 oC. Operational noise <0.2 nS/cm for sequential suppression. Ring-shaped electrodes made of stainless steel 316L Cr-Ni-Mo alloy. The maximum operating pressure should be 10.0 MPa (100 bar). The instruments suppressor system shall have the following: A tri-chamber micro capillary packed bed suppressor module Automatic chemical regeneration of the suppressor module. 100% solvent compatibility Ten years warranty CO2 suppressor shall provide fo CO2 removal from the eluent via vacuum degassing. The column thermostats shall provide a heating capability up to 80 oC; cooling capability down to -20 oC from ambient temperature; temperature stability <0.05 oC; temperature accuracy 0.2 oC. Auto Sampler The autosampler must have an ultrafiltration system and be capable of the following; Be able to hold at least 100 vials each with a minimum volume of at least 10 ml allowing for overnight runs and multiple injections per vial. Has random access, so that priority samples can be added at any time without having to pause sample sequence or reorganizing the sample rack. Must hold at least three rinse vessels of at least 200 ml volumes allowing for complete rinse of the flow path of each sample. Must use non-proprietary vials commonly available from multiple lab supply vendors. Must be able to use inline filtration of samples using a crossflow principle down to 0.2 m. Rinse the filter between samples. Handles 100-200 samples per filter. Software The systems software shall provide for the following: Remote access and full network compatibility. Traceability of all QC samples and notify users if a sample fails user-specified criteria. Automatic insertion of QA/QC samples into the current sample analysis table Free software upgrades. Software support for five years. Warranties Instrument coverage for three years. Anion suppressor coverage for ten years. Instrument parts and support offer guaranteed availability for ten years after the model reaches commercial retirement from the market. Delivery: Delivery is approximately six weeks from date of award. This meets the needs of the PTC timeline to complete instrument acquisition. Section (a)(2)(iii) states, For DoD, NASA, and the Coast Guard, services may be deemed to be available only from the original source in the case of follow-on contracts for the continued provision of highly specialized services when it is likely that award to any other source would result in: Substantial duplication of cost to the Government that is not expected to be recovered through competition; or Unacceptable delays in fulfilling the agencys requirements. With respect to (b), there would be unacceptable delays in fulfilling the agencys requirements. The PTC has until the end of Fiscal Year 2025 to be capable of analyzing SM materials. The PTC must have demonstrated these capabilities as well. Delaying this acquisition would not meet the PTCs requirements. Metrohms prices for their ICS are similar to the prices of similar ion chromatography systems offered by other vendors.

Full description on SAM.gov

Award Overview

Award Number

SP470625P0007

Award Amount (SAM.gov award notice)

$138.8K

Award Date

Jul 14, 2025

Awardee

Awardee UEI

CMBPHDRMCS51

Awardee CAGE Code

3WXJ7

Original Solicitation

Notice ID: 93e7a6c63ddc4f059bdeb2f0a9b9abc5

Posted Date: Jul 14, 2025

Original Response Deadline: Not specified

More From This Vendor

Top 5 most recent

5
  • N0017322P0712
    THERMO ELECTRON NORTH AMERICA LLC
    Department of DefenseNAICS 334516
    $23.8KSigned Aug 14, 2026
  • N0017425P1161
    THERMO ELECTRON NORTH AMERICA LLC
    Department of DefenseNAICS 334516
    $86.1KSigned Aug 13, 2026
  • N6852026P1050
    THERMO ELECTRON NORTH AMERICA LLC
    Department of DefenseNAICS 334516
    $5.5KSigned Jul 29, 2026
  • N0018925PZ108
    THERMO ELECTRON NORTH AMERICA LLC
    Department of DefenseNAICS 334516
    $44.5KSigned Jul 29, 2026
  • N6893626F5353
    THERMO ELECTRON NORTH AMERICA LLC
    Department of DefenseNAICS 334516
    $349.3KSigned Jul 27, 2026

Contacts

Contracting Officer

Primary Contact

Blair HartleyDSN312-850-6274

Documents

Lifecycle

  1. 3
    Version 3Award NoticeArchivedCurrent

    66--Laboratory Equipment and Supplies

    Notice 93e7a6c63ddc4f059bdeb2f0a9b9abc5 on SAM.gov

Other notices for this solicitation

  1. Pre-SolicitationRelated noticeApr 29, 2025

    ION Chromatograph System (ICS)

    Notice 9c4c2b7205b745d284b3bbfb1b1b6673 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

SP470625Q0011

Archive Date

Jul 29, 2025