Matress, Bed

This information is for solicitation SPE1C115Q0102 NSN:7210016167819. This is for the purchase of the following: MATTRESS,BED 38"x80"x7.5" 630 COIL CAGE 1HFZ3 PART # 700000014-1020 PACKAGING SHALL BE IN ACCORDANCE WITH ASTM D 3951 " NON-STANDARD DOUBLE WIDE PALLET IS REQUIRED FOR ALL SIZES EXCEPT THE 34" WIDTH MATTRESS. THE MATTRESSES SHALL BE PALLETIZIED ON A NON-STANDARD OVERSIZED DOUBLE WIDE 4-WAY ENTRY PALLET. THE REQUIRED NON- STANDARD DOUBLE WIDE PALLET SHALL BE 78" IN LENGTH AND 56" IN WIDTH OR 74" IN LENGTH AND 56" IN WIDTH. THE DOUBLE WIDE PALLET SHALL ACCOMMODATE ALL SIZE MATTRESSES EXCEPT THE 34"WIDTH. THE WEIGHT REQUIREMENT FOR MATTRESS PALLETIZATION SHALL NOT BE LESS THAN 25O LBS. MINIMUM NOR EXCEED 3,000LBS, EXCLUDING THE PALLET. THE PALLET SHALL BE BUILT IN ACCORDANCE WITH NN-P-71, MIL-P-15011, OR ASME MH1.8M. EACH PREPARED LOAD SHALL BE BONDED WITH PRIMARY AND SECONDARY STRAPS IN ACCORDANCE WITH BONDING MEANS "C" AND "D" AND FILM BONDING MEANS "F" OR "G" AS CITED IN MIL-HDBK-774 .\ SPECIAL MARKING: IN ADDITION TO ANY SPECIAL MARKING REQUIRED BY THE CONTRACT OR PURCHASE ORDER, SHIPPING AND PALLETIZED UNIT SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-129. IN ADDITION, THE FOLLOWING MARKING SHALL ALSO APPEAR ON AT LEAST TWO SIDES EDGES OF EACH SHIPPING CONTAINER IN LETTERS NOT LESS THAN 1.5 INCHES IN HEIGHT" MATTRESSES CAN BE STACKED UP TO 50" IN HEIGHT AND STOWED FLAT, NOT ON END. THE MATTRESSES SHALL BE STOWED FLAT TO OBTAIN A STABLE LOAD. THE PATTREN SHALL BE ONE ON TOP OF THE OTHER IN THE SAME DIRECTION AND LAY FLAT. SIMMONS BEDDING COMPANY DBA 1HFZ3 P/N 700000014-1020 IAW REFERENCE STD NR MIL-STD-129R REVISION NR R DTD 10/03/2006 PART PIECE NUMBER: This will be for a quantity of 85. The first delivery order is due 90 days after the date of award. The destination for this item is Virginia Beach, VA. This acquisition will be Total Small Business Set-Aside. No Government Furnished Material (GFM) will be provided. All materials are to be contractor furnished. *Past Performance Retrieval System (PPIRS) will be used. The PPIRS carries more weight in the award evaluation process than price. First Articles required after award. All items must be 100% U.S. Made out of 100% U.S. Materials. Availability of solicitations, FAR 5.102(d) applies, as our office no longer issues solicitations or amendments in paper form. Solicitation will be posted on https://www.dibbs.bsm.dla.mil/ Detailed system requirements and instructions for registration can be found on the DLA DIBBS Home Page accessed on https://www.dibbs.bsm.dla.mil/. A few highlights of the information that will be found include: 1. On the DLA Internet Bulletin Board System (DIBBS) Home Page, click the VENDOR REGISTRATION link to begin the registration process. 2. In order to register for access to secure portions of DLA DIBBS, the company you are representing must already be registered in the SAM.gov system. 3. A Commercial and Government Entity (CAGE) Code registration will be processed immediately. A User ID will appear on the registration screen and a password will be sent separately to the email address of the Super User. If a CAGE is already registered on DLA DIBBS, the name and email address of the Super User will be provided. The Super User should be contacted to set-up additional accounts, logons and passwords for their CAGE. DIBBS Super User * If your CAGE has already been registered on DIBBS, the name and email address of the person designated as your super user will be provided. * The representative who starts the DIBBS registration process has the option to accept their SAM registration POC as the DIBBS super user, or they can designate themselves or another person to act as the super user for the CAGE. * The super user acts as the account administrator for a CAGE. They can add up to ninety-eight (98) additional users, provide user IDs and passwords, modify existing users, and control the login status of each user for their CAGEs through My Account (Account Maintenance). ****The Defense appropriations and authorization acts and other statutes (including what is commonly referred to as "The Berry Amendment") impose restrictions on the DoD's acquisition of foreign products and services. Generally, Clothing and Textile items (as defined in DFARS clause 252.225-7012) and "specialty metals" (as defined in DFARS clause 252.225-7014), including the materials and components thereof (other than sensors, electronics, or other items added to, and not normally associated with clothing), must be grown, reprocessed, reused, melted or produced in the United States, its possessions or Puerto Rico, unless one of the DFARS 225.7002-2 exceptions applies. DLA Troop Support has developed a web-based system that allows manufacturers the ability to request specifications, patterns and drawings on our contracting page. To request technical data for DLA Troop Support Clothing and Textiles (C&T) solicitations, use the following link to the DLA Troop Support C&T Technical Data Repository area at: http://www.troopsupport.dla.mil/Portal/sreqfrm.aspx The point of contact for subject acquisition is: Megan Graveley; Acquisition Specialist; Phone (215) 737-5630; Email: Megan.Graveley@dla.mil