GovChime
Notice ID: 246596afe9634e3abf647e1c20f60e49Combined Synopsis/Solicitation

Women's Army Green Service Uniform All Weather Coat

Archived on April 24, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
3:00 PM UTC−04:00
Posted
March 21, 2024
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
315210: Cut and Sew Apparel Contractors
Agency
Department of WarDEFENSE LOGISTICS AGENCY

Notice details

Office
DLA TROOP SUPPORT
Last updated
Sep 9, 2025

Identifiers

Solicitation number
SPE1C124R0041
Notice ID
246596afe9634e3abf647e1c20f60e49

Description

This information is for solicitation SPE1C1-24-R-0041. The item is as follows: Item: Womens Army Green Service Uniform (AGSU) All Weather Coat (AWC). The applicable NSNs for this procurement is 8410-01-683-8832(s). The coat shall conform to the requirements of GSL-PD-19027A pattern date 13 March 2020. DLA Troop Support intends to award a 60-month contract consisting of five-(5) 12-month price tier periods. The minimum purchase quantity is 5,610 coats. The annual estimated quantity (AEQ) per tier is 35,500 coats. The maximum (MAX) quantity over the anticipated 60-month contract is 238,700 coats. The solicitation will be issued as a 100% Small Business Set-Aside (SBA) that will result in a firm fixed price, Indefinite Delivery Indefinite Quantity Type Contract. This is a Best Value acquisition with Trade-Off Source Selection Procedures. The following evaluation factors will be utilized in descending order of importance: Past Performance Confidence Assessment and Product Demonstration Model (PDM). All evaluation factors other than cost or price, when combined, are significantly more important than cost or price. As other evaluation factors become more equal, the evaluated cost or price becomes more important. The applicable North American Industrial Classification System Code (NAICS) is 315210 Cut and Sew Apparel Contractors. Small business size standards matched to industry NAICS codes are published by the Small Business Administration and are available at http://www.sba.gov/content/table-small-business-size-standards. The Womens AGSU AWC will require source inspection and price will be FOB Destination. The first delivery order is due 120 days after the date of award with subsequent orders due in 90 days. The delivery destination for these items is Pendergrass Distribution Center located in Pendergrass, GA 30567. Source Selection criteria will be used for award evaluation purposes in accordance with FAR 15.101-1. For award evaluation purposes technical merit is more important than price. Evaluation Factors for award are Past Performance Confidence Assessment, Product Demonstration Models (PDM) and Proposed Price in that order. The Government intends to use FAR Part 12 for this acquisition. All items must be 100% U.S. Made out of 100% U.S. Materials. Offerors will be required to submit a total of one (1) size 12 Regular Product Demonstration Model (PDM) from each proposed place of performance; a history of their experience/past performance record from the period three years prior to the solicitation closing date. PDMs must be submitted with offers and will be evaluated for conformance to the specifications. Past Performance will be the most important evaluation factor, followed by Product Demonstration Model(s), then Price. Availability of solicitations, FAR 5.102(d) applies, as our office no longer issues solicitations or amendments in paper form. The Solicitation will be posted on DIBBS and SAM.gov. Please check both. Refer to the following when viewing solicitation on DIBBS: The Solicitation will be posted on https://www.dibbs.bsm.dla.mil/ Detailed system requirements and instructions for registration can be found on the DLA DIBBS Home Page accessed on https://www.dibbs.bsm.dla.mil/. A few highlights of the information that will be found include: 1. On the DLA Internet Bulletin Board System (DIBBS) Home Page, click the VENDOR REGISTRATION link to begin the registration process. 2. In order to register for access to secure portions of DLA DIBBS, the company you are representing must already be registered in the System for Award Management (SAM)(https://www.sam.gov). 3. A Commercial and Government Entity (CAGE) Code registration will be processed immediately. A User ID will appear on the registration screen and a password will be sent separately to the email address of the Super User. If a CAGE is already registered on DLA DIBBS, the name and email address of the Super User will be provided. The Super User should be contacted to set-up additional accounts, logons and passwords for their CAGE. DIBBS Super User * If your CAGE has already been registered on DIBBS, the name and email address of the person designated as your super user will be provided. * The representative who starts the DIBBS registration process has the option to accept their SAM registration POC as the DIBBS super user, or they can designate themselves or another person to act as the super user for the CAGE. * The super user acts as the account administrator for a CAGE. They can add up to ninety-eight (98) additional users, provide user IDs and passwords, modify existing users, and control the login status of each user for their CAGEs through My Account (Account Maintenance). ****The Defense appropriations and authorization acts and other statutes (including what is commonly referred to as The Berry Amendment ) impose restrictions on the DoDs acquisition of foreign products and services. Generally, Clothing and Textile items (as defined in DFARS clause 252.225-7012) and specialty metals (as defined in DFARS clause 252.225-7014), including the materials and components thereof (other than sensors, electronics, or other items added to, and not normally associated with clothing), must be grown, reprocessed, reused, melted or produced in the United States, its possessions or Puerto Rico, unless one of the DFARS 225.7002-2 exceptions applies. NOTICE TO DLA SUPPLIERS: DLA Troop Support has developed a web-based system that allows manufacturers the ability to request specifications, patterns and drawings on our contracting page. To request technical data for this solicitation, use the following link to the DLA Troop Support C&T Technical Data Repository area at: http://www.dla.mil/TroopSupport/ClothingandTextiles/SpecRequest.aspx Please ensure the following required fields are entered when submitting your request: Spec/Cid Number: GL-PD-19027A Spec/Cid Date: 06 March 2020 Pattern Date: 13 March 2020 Item Description: Womens Army Green Service Uniform All Weather Coat (PGC 00180) Solicitation Number: SPE1C1-24-R-0041 Upon submission of a technical data request, please notify the Contract Specialist, Sharan Khaira, via e-mail at Sharan.Khaira@dla.mi and the Contracting Officer Marcia Henson via e-mail at Marcia.Henson@dla.mil. The point of contact for subject acquisition is: Sharan Khaira; Contract Specialist Email: Sharan.Khaira@dla.mil 2nd Point of contact: Marcia Henson; Contracting Officer Email: Marcia.Henson@dla.mil

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:SPE1C124R0041
  1. Combined Synopsis
  1. 3×
    Combined SynopsisCurrentMar 7, 2024

    Women's Army Green Service Uniform All Weather Coat

    Notice 246596afe9634e3abf647e1c20f60e49 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Mission and Installation Contracting Command Installation Contracting Office, West Point, NY (MICC-West Point) is issuing this SOLICITATION/ Synopsis to procure a vendor to manufacture Overblouses, Women on a multi year at West Point NY. The initial delivery will be for May 2027 (est) This requirement will be a 100% set aside for total Small Business concerns. The NAICS code 315210 Apparel cut and sew contractors, size standard is 850 Employees and FSC/PSC of 8410 Outerwear, Women. Please verify that both your UEI #, CAGE Code are current and valid in the System for Award Management (SAM). Offerors are reminded to carefully review solicitation documents issued as criteria stated in the solicitation and shall govern. The solicitation has been issued in electronic format only and will be available on the Internet at: https://www.sam.gov. It is the offeror's responsibility to periodically check SAM.gov for updates, changes, and notices. *SPECS, INSTRUCTIONS, & SAMPLES--please reference attachments on SAM.gov for full details and instructions* Quotes are to be submitted via email to Shawn Valastro, at shawn.m.valastro.civ@army.mil on or before the close date noted in the soliciation. Samples are to be submitted and to arrive in accordance with solicitation instructions, on or before the close date noted in the solicitation.
72%
Combined Synopsis11/19/2026
DLA Troop Support is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for the following: Nomenclature: HGU-98/P Flight Deck Crewman’s Helmet: NSNs: Manufacturer Part #: NSN 72-R3-PC-1S 8415-01-707-3246 72-R3-PC-2S 8415-01-707-3288 72-R3-PG-1S 8415-01-707-3315 72-R3-PG-2S 8415-01-707-3333 72-R3-PR-1S 8415-01-707-3654 72-R3-PR-2S 8415-01-707-3670 72-R3-PW-1S 8415-01-707-3682 72-R3-PW-2S 8415-01-707-3708 72-R3-PP-1S 8415-01-707-3636 72-R3-PP-2S 8415-01-707-3638 72-R3-PY-1S 8415-01-707-3723 72-R3-PY-2S 8415-01-707-3833 72-R3-PB-1S 8415-01-707-3208 72-R3-PB-2S 8415-01-707-3218 Confirmed Components: Manufacturer Part #: NSN 72-RET-21 8415-01-707-7144 72-RET-22 8415-01-707-7148 72‐LIN‐SET‐1 8415-01-699-8673 72‐LIN‐SET‐2 8415-01-707-7159 76‐SCK‐30‐BK 8305-01-727-8271 DLA may also procure the following components: Manufacturer Part #: NSN EE7001-01 8465-01-729-3691 21-HNS-21 8415-01-707-7134 21-HNS-22 8415-01-707-7141 80-CAK-BP 8470-01-729-3458 70‐ESS‐PRM 8470-01-729-3493 The EXFIL LTP helmet is a new item of supply for the USMC and USN aviation maintenance roles/positions and will impact the demand of the HGU-24/P, HGU 25/P helmet, MIL-H-81735. The HGU-98/P maintainer helmet provides improved impact protection, hearing protection and comfort over the legacy HGU-24/25 helmet. The HUG 98/P helmet provides increased hearing protection and impact protection over the legacy helmet. The HUG-98/P helmet consists of a one-piece hard shell with rail mounted hearing protection and eye protection goggles. The HGU-98/P helmet has items that can be replaced individually and accessories that do not come on the helmet. The HGU-98/P Helmet provides improved impact protection, hearing protection and comfort over the legacy HGU-24/25 helmet. This new helmet consists of a one-piece hard shell with rail mounted hearing protection and eye protection goggles. The points of contact for this action are Jennifer Bartnick, IPTL for the HGU-98/P Flight Deck Crewman’s Helmet, jennifer.l.bartnick.civ@us.navy.mil and Philip Seale, DAPML for the HGU-98/P Flight Deck Crewman’s Helmet, philip.h.seale.civ@us.navy.mil. DFARS Clause 252.225-7012 Preference for Certain Domestic Commodities applies. All information received in response to this RFI/ Sources Sought will contribute to determining the method of procurement. THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred. If your organization has the potential capacity to perform these contract services, please provide the following information: 1) Organization name, address, email address, Web site address, telephone number, and size and type of ownership for the organization; and 2) Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements. [Note: In accordance with FAR 10.001(b), agencies should not request potential sources to submit more than the minimum information necessary.] Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions. Submission Instructions: Interested parties who consider themselves qualified to perform the above-listed services are invited to submit a response to Matthew Porreca at Matthew.Porreca@dla.mil. All responses under this sources sought notice must be emailed. If you have any questions concerning this opportunity, please contact: Matthew Porreca at Matthew.Porreca@dla.mil
62%
Market Research12/12/2026
Proposed procurement for NSN 8455016886865 INSIGNIA,GRADE,ENLI: Line 0001 Qty 30000 UI PR Deliver To: ARIZONA INDUSTRIES FOR THE BLIND By: 0090 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically.
59%
Combined Synopsis10/20/2026
VA-CHIEF-WILDLIFE INSPEC UNIT-UNIFORMS
58%
AwardedOpen
This solicitation is to purchase employee uniforms for CTX EMS IAW the Scope of Work. Please see attached documents for additional details. Amendment 0002 contains the updated SOW and other information/documents.
58%
Combined Synopsis11/13/2026

Additional Details

Solicitation Number

SPE1C124R0041

Archive Date

Apr 24, 2024

Office Address

PHILADELPHIA, PA, 19111-5096