GovChime
Notice ID: 859759ad8ef14ef08a8aa9f4d57c73b3Solicitation

Acrylic Sandbags

Archived on May 14, 2022. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
3:00 PM UTC−04:00
Posted
April 15, 2022
Notice type
Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
314910: Textile Bag and Canvas Mills
Agency
Department of WarDEFENSE LOGISTICS AGENCY

Notice details

Office
DLA TROOP SUPPORT
Last updated
Dec 4, 2025

Identifiers

Solicitation number
SPE8E622R0002
Notice ID
859759ad8ef14ef08a8aa9f4d57c73b3

Description

DLA Troop Support has issued a Request for Proposal (RFP) for a fixed price with economic price adjustment, Indefinite Delivery Indefinite Quantity (IDIQ) Contract for the manufacture and delivery of Acrylic Sand Bag, size 26 x 14 . The sand bag is required in two colors. NSN 8105-00-935-7101, camouflage green 383 shall be color 34094 per FED-STD-595. NSN 8105-01-331-3704, shall be a lusterless tan approximating any of the following colors of FED-STD-595: 30279 through 30315, 30324 and 30450 for color 2. The solicitation is issued as a 100% Small Business Set-Aside. The Government anticipates a multiple-award IDIQ contract. The contract will consist of a base ordering period of two (2) years and three (3) one-year option periods. The guaranteed minimum for the resultant contract is a one-time obligation during the base period of $113,000.00 per award made, for the life of the contract regardless of any exercised option periods. The estimated 5-year contract value is $13,200,000.00 and the contract maximum is $20,000,000.00 (Including Options). Delivery will be FOB ORIGIN. The Government required delivery schedule is 30 days, contingent on the quantity of an order. The annual estimated demand for each NSN (1 Camouflage Green and 2- Lusterless Tan) is 2,186 HD. The NAICS code is 314910 and the size standard is 500 employees. The acrylic staple fibers used in manufacturing the acrylic sandbags are NOT currently produced in the United States. Therefore, a Domestic Non-Availability Determination (DNAD) for Acrylic Staple Fiber for Acrylic Fabric Sandbags was sought and obtained in October 2008 and remains in effect. This determination provides an exception to the Berry Amendment restrictions. FAR Part 12 Acquisition of Commercial Items and FAR Part 15 Contracting by Negotiation procedures will be utilized. Lowest Price Technically Acceptable in accordance with FAR 15.101-2 will be the source selection approach. This is NOT a Request for Proposal, Request for Quote, or Invitation for Bid. The Government is in no way obligated to purchase any material as a result of this notice. A copy of the solicitation will be available via DLA Internet Bid Board System (DIBBS), https://www.dibbs.bsm.dla.mil/. All responsible sources will be able to submit a proposal which will be considered by DLA Troop Support. NSN 8105-00-935-7101 BAG<(>,<)> SAND,ACRYLIC<(>,<)> RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES CAMOUFLAGE GREEN 383 SHALL BE COLOR 34094 PER FED-STD-595 RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES SIZE 26" X 14" EXCEPTION: A TIE STRING IS REQUIRED FOR EACH BAG AS FOLLOWS,TIE STRING SHALL BE FORMED OF TIGHTLY TWISTED STRANDS OR OF BRAIDED STRANDS. MATERIAL AS SPECIFIED IN CID A-A-52140. THE LENGTH OF THE FINISHED TIE STRING SHALL BE A MINIMUM OF 24 INS. THE BREAKING STRENGTH OF THE TIE STRING SHALL BE NOT LESS THAN 70 LBS. THE COLOR OF THE TIE STRING SHALL BE AS SPECIFIED FOR THE BAG OR BLACK. A MINIMUM OF FIVE EXTRA TIE STRINGS SHALL BE FURNISHED WITH EACH 100 BAGS. THE TIE STRING SHALL BE SECURELY FASTENED AT ITS CENTER TO ONE SIDE OF THE SAND BAG BETWEEN 4 AND 5 INS. FROM THE TOP EDGE OF THE BAG, EITHER BY SEWING THE STRING IN THE STITCHES OF A SEWN SIDE SEAM OR BY THREADING THROUGH THE SIDE EDGE OF THE BAG AND KNOTTING (TYING) IF NEITHER SIDE OF THE BAG HAS A SEWN SEAM. CAMOUFLAGE GREEN 383 SHALL BE COLOR 34094 PER FED-STD-595. ADDITIONAL PACKAGING INSTRUCTIONS: -PALLET LOADS SHALL BE COMPLETELY COVERED WITH UV RESISTANT SHRINK WRAP BAGS OR STRETCH FILM -OVERALL HEIGHT INCLUDING PALLET: 45 INCHES. -SANDBAGS SHALL BE PALLETIZED ON 40" X 48" 4 WAY ENTRY HEAT TREATED PALLET. THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY / FEDERAL SPECIFICATION/STANDARD. SEE SECTION L, CLAUSE 52.211-2 FOR ORDERING SUCH DATA. SPECIFICATIONS OR COMMERCIAL ITEM DESCRIPTIONS (CIDS) MAY BE OBTAINED FROM THE WEB SITE http://quicksearch.dla.mil/ SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). CRITICAL APPLICATION ITEM IAW BASIC CID A-A-52140A NOT 2 REVISION NR A DTD 08/12/2019 PART PIECE NUMBER: A-A-52140A-1 IAW REFERENCE STD NR MIL-STD-129R(2) REVISION NR R DTD 09/27/2019 PART PIECE NUMBER: IAW REFERENCE STD NR MIL-STD-147E(2) REVISION NR E DTD 06/27/2019 PART PIECE NUMBER: IAW REFERENCE STD NR MIL-STD-2073-1E(4) REVISION NR E DTD 04/22/2019 PART PIECE NUMBER: PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT NSN 8105-01-331-3704 BAG, SAND, ACRYLIC<(>,<)> RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES TAN 26" X 14". ADDITIONAL REQUIREMENTS:A TIE STRING IS REQUIRED FOR EACH BAG AS FOLLOWS, TIE STRING SHALL BE FORMED OF TIGHTLY TWISTED STRANDS OR BRAIDED STRANDS, MATERIAL AS SPECIFIED IN CID A-A-52140 THE LENGTH OF THE FINISHED TIE STRING SHALL BE A MINIMUM OF 24 INCHES. THE BREAKING STRENGTH OF THE TIE STRING SHALL NOT BE LESS THAN 70 LBS. THE COLOR OF THE TIE STRING SHALL BE AS SPECIFIED FOR THE BAG OR BLACK.A MINIMUM OF FIVE EXTRA TIE STRINGS SHALL BE FURNISHED WITH EACH 100 BAGS. THE TIE STRING SHALL BE SECURELY FASTENED AT ITS' CENTER TO ONE SIDE OF THE SAND BAG BETWEEN 4 AND 5 INCHES FROM THE TOP EDGE OF THE BAG,EITHER BY SEWING STRING INTO THE STITCHES OF A SEWN SIDE SEAM OR BY THREADING THROUGH THE SIDE EDGE OF THE BAG AND KNOTTING (TYING) IF NEITHER SIDE OF THE BAG HAS A SEWN SEAM. COLOR SHALL BE A LUSTERLESS TAN APPROXIMATING ANY OF THE FOLLOWING COLORS OF FED-STD-595: 30279 THROUGH 30315, 30324 AND 30450 FOR COLOR 2. ADDITIONAL PACKAGING INSTRUCTIONS: -PALLET LOADS SHALL BE COMPLETELY COVERED WITH UV RESISTANT SHRINK WRAP BAGS OR STRETCH FILM. -OVERALL HEIGHT INCLUDING PALLET: 45 INCHES. -SANDBAGS SHAL BE PALLETIZED ON 40"X48" 4 WAY ENTRY HEAT TREATED PALLET. THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY / FEDERAL SPECIFICATION/STANDARD. SEE SECTION L, CLAUSE 52.211-2 FOR ORDERING SUCH DATA. SPECIFICATIONS OR COMMERCIAL ITEM DESCRIPTIONS (CIDS) MAY BE OBTAINED FROM THE WEB SITE http://quicksearch.dla.mil/ SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). IAW BASIC CID A-A-52140A NOT 2 REVISION NR A DTD 08/12/2019 PART PIECE NUMBER: A-A-52140A-2 IAW REFERENCE STD NR MIL-STD-129R(2) REVISION NR R DTD 09/27/2019 PART PIECE NUMBER: IAW REFERENCE STD NR MIL-STD-147E(2) REVISION NR E DTD 06/27/2019 PART PIECE NUMBER: IAW REFERENCE STD NR MIL-STD-2073-1E(4) REVISION NR E DTD 04/22/2019 PART PIECE NUMBER: PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:SPE8E622R0002
  1. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. SolicitationCurrentApr 15, 2022

    Acrylic Sandbags

    Notice 859759ad8ef14ef08a8aa9f4d57c73b3 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Proposed procurement for NSN 1730016469037 COVER,AIRCRAFT ENGINE: Line 0001 Qty 72 UI EA Deliver To: DLA DISTRIBUTION DEPOT OKLAHOMA By: 0091 DAYS ADO This is a source controlled drawing item. Approved source is 1LE67 KC-135-166. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. The items furnished must meet the requirements of the drawing cited in the solicitation. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis11/23/2026
A request for proposals will be solicited for the following items: Tent, Soldier Crew, Green/Tan, NSN 8340-01-359-0084 60 ea Tent, Soldier Crew, Green/White, NSN: 8340-01-359-1481 260 ea Tent Body Assembly, SCT, NSN: 8340-01-450-3148 20 ea Frame Assembly, SCT, NSN: 8340-01-450-3151 50 ea Fly Assembly, SCT, Green/Tan, NSN: 8340-01-450-3488 130 ea This solicitation will be issued on an unrestricted basis and will include an evaluation preference for Hub Zone Small Businesses. The acquisition will establish a Firm Fixed Price, Indefinite Delivery, Definite Quantity Type Contract. Production lead time for this acquisition is 180 days after award. The Destination Depot will be Pendergrass, GA. Subsequent deliveries will be scheduled in 30-day increments within a twelve (12) month timeframe. Award will be based on the lowest priced proposal. A First Article sample will be required 90 days after date of award at the contractor’s plant. The Defense Appropriations and Authorization Acts and other statutes (including what is commonly referred to as “The Berry Amendment”) impose restrictions on the DoD’s acquisition of foreign products and services. Generally, Clothing and Textile items (as defined in 252.225-7014), including the materials and components thereof (other than sensors, electronics, or other items added to, and not normally associated with clothing), must be grown, reprocessed, reused, melted or produced in the United States, its possessions or Puerto Rico, unless one of the DFARS 225.7002-2 exceptions applies. This is a pre-solicitation synopsis. The actual Request for Proposals (RFP), with information and specifics, will be posted on https://www.dibbs.bsm.dla.mil/. Detailed system requirements and instructions for registration can be found on the DLA DIBBS Home Page accessed on https://www.dibbs.bsm.dla.mil/. A few highlights of information that will be found include: 1. On the DLA Internet Bid Board System (DIBBS) Home Page, click the VENDOR REGISTRATION link to begin the registration process. 2. To register for access to secure portions of DLA DIBBS, the company you are representing must already be registered in the System for Award Management (SAM) system. 3. A Commercial and Government Entity (CAGE) Code registration will be processed immediately. A User ID will appear on the registration screen and a password will be sent separately to the e-mail address of the Super User. If a CAGE is already registered on DLA DIBBS, the name and email address of the Super User will be provided. The Super User should be contacted to set-up additional accounts, logons and passwords for their CAGE. DIBBS Super User * If your CAGE has already been registered on DIBBS, the name and email address of the person designated as your super user will be provided. * The representative who starts the DIBBS registration process has the option to accept their CCR registration POC as the DIBBS super user, or they can designate themselves or another person to act as the super user for the CAGE. * The super user acts as the account administrator for a CAGE. They can add up to ninety-eight (98) additional users, provide user IDs and passwords, modify existing users, and control the login status of each user for their CAGEs through My Account (Account Maintenance). Specifications, patterns, drawings or other applicable documents, can be obtained by contacting Nicholas DiNofa by e-mail at Nicholas.dinofa@dla.mil.
-Solicitation11/06/2026
Proposed procurement for NSN 1730016469037 COVER,AIRCRAFT ENGINE: Line 0001 Qty 63 UI EA Deliver To: DLA DISTRIBUTION DEPOT OKLAHOMA By: 0112 DAYS ADO This is a source controlled drawing item. Approved source is 1LE67 KC-135-166. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. The items furnished must meet the requirements of the drawing cited in the solicitation. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis10/13/2026
Proposed procurement for NSN 4210015035217 CYLINDER,FIRE EXTINGUI: Line 0001 Qty 67 UI EA Deliver To: DLA DISTRIBUTION ANNISTON By: 0276 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: DLA DISTRIBUTION ANNISTON By: 0090 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis11/20/2026
Proposed procurement for NSN 8455008172219 DECORATION SET,INDI: Line 0001 Qty 16000 UI SE Deliver To: ARIZONA INDUSTRIES FOR THE BLIND By: 0120 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically.
-Combined Synopsis11/06/2026

Additional Details

Solicitation Number

SPE8E622R0002

Archive Date

May 14, 2022

Office Address

PHILADELPHIA, PA, 19111-5096