GovChime
Notice ID: b465171c7008cb8b757d18e7e5e25d90Combined Synopsis/Solicitation

Cloth, Laminate

Archived on July 3, 2019. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
6:59 AM UTC+02:00
Posted
March 22, 2012
Notice type
Combined Synopsis/Solicitation
NAICS
313312: Classification Not Available

Notice details

PSC
83: TEXTILE/LEATHER/FUR; TENT; FLAG
Last updated
Dec 2, 2025

Identifiers

Solicitation number
SPM1C112Q0293
Notice ID
b465171c7008cb8b757d18e7e5e25d90

Description

SECTION B PR: 0045041540 PGC: 11276 ITEM DESCRIPTION: CLOTH, LAMINATED, PLASTIC VINYL CHLORIDE BASIC, 54 INCH WIDTH TYPE II, CLASS 2, FORM 1, FIRE AND WEATHER RESISTANT, WATERPROOF, 9.0 TO 11.0 OZ/SQ. YD. FED STD 595 SHADE GREEN 24108, BOTH SIDES. . ADDITIONAL INFORMATION FOR A-A-55308: . NO ADDITIONAL INFORMATION FOLLOWS. . STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS IDENTIFIED AS ROLL #3746. FOLIAGE GREEN 504 IS TO BE USED AS SPECIFIED BY CONTRACT. THIS APPLIES TO TYPE II, CLASS 1 ONLY. ADDITIONAL INFORMATION FOR L-P-375: . CANCELLED AND SUPERSEDED BY ASTM-D1593. (Ref. T0531) . ADDITIONAL INFORMATION FOR PPP-P-1136: . PPP-P-1136 HAS BEEN CANCELLED. USE ASTM-D-3951- STANDARD PRACTICE FOR COMMERCIAL PACKAGING. COPIES MAY BE OBTAINED FROM THE AMERICAN SOCIETY FOR TESTING AND MATERIALS, 100 HARBOR DRIVE, WEST CONSHOHOCKEN, PA. 19428. ADDITIONAL INFORMATION FOR MIL-P-43334: . NO ADDITIONAL INFORMATION FOLLOWS. . ADDITIONAL INFORMATION FOR FED-STD-191: FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW DESIGN. WHEN NOT USING FED-STD-191, SEE INTERIM CHANGES TO END ITEM SPECIFICATION FOR REPLACEMENT ASTM. INTERIM CHANGES TO FED-STD-191A: TEST METHOD 5202, PARA. 5.3, DELETE FIRST SENTENCE AND SUBSTITUTE: 'THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE OF THE VISE, SUCH THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND ONE INCH OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF THE VISE), AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE'. TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING. PAGE 1, PARA 4.1.2,LINE 4: DELETE 'B-97' AND SUBSTITUTE 'B-91'. THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONE DEPLETING SUBSTANCES: 1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540, AND 1550. PARA 5.1 OF THESE TEST METHODS REQUIRE THE USE OF 1,1,1- TRICHLOROETHANE, ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN OZONE DEPLETING SUBSTANCE (METHYL CHLOROFORM) AND IS THEREFORE PROHIBITED. THE USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS ARE IN BASIC OR ANY REFERENCED DOCUMENT. METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD. PAGE 2, PARA. 5.3 DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE FOLLOWING: 'THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH THE OUTER EDGE OF THE VISE, SUCH THAT 1' OF THE SPECIMEN LIES WITHIN THE CLAMP AND 1' OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (INNER FACE OF THE VISE) AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE.' METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR TEXTILE MATERIALS, PAGE 5, PARA. 5.2.2, LINE 8: DELETE SENTENCE BEGINNING WITH 'THE SPECIMENS AND BALLAST' IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: 'THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG. F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF 'HIGH' ON THE TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 45-60 MINUTES OR UNTILSAMPLES ARE DRY IN A ROTATING TUMBLE DRYER.' PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE BEGINNING WITH 'THE SPECIMENS AND BALLAST' IN ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING: 'THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG. F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF 'HIGH' ON THE TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40 MINUTES OR UNTIL SAMPLES ARE DRY.' METHOD 5931, ELECTROSTATIC DECAY OF FABRICS; DETERMINATION OF PAGE 1, PARA. 3: AFTER NUMBER OF DETERMINATIONS ADD 'PER SAMPLE UNIT'. PAGE 1, PARA. 4: DELETE 'APPARTUS' AND SUBSTITUTE 'APPARATUS'. PAGE 1, PARA. 5.1, LINE 3: AFTER 'AT' DELETE'APPROXIMATELY'. PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER 'OF' ADD '+-'. LINE 6: AFTER 'TO' ADD '+-'. PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:'5.3 MOUNT A SPECIMEN TIGHTLY ACROSS THE ELECTRODES, CENTERING IT OVER THE SENSOR OPENING. THE SURFACE OF THE TEST SPECIMEN (BACK OR FRONT) SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE RESIDUAL CHARGE LEVEL ON THE SAMPLE AS SEEN BY THE SENSOR, INCLUDING POLARITY. NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS +500 VOLTS YIELD THE BEST RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR A PERIOD OF 20 SECS. AT THE END OF THE 20 SECOND PERIOD, THE HIGH VOLTAGE (5000 VOLTS) SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY GROUNDED. THE VOLTAGE BEHAVIOR OF THE SPECIMEN WITH RESPECT TO TIME SHALL BE PLOTTED ON THE RECORDER. NOTE: IN SOME CASES, THE TEST EQUIPMENT WILL DISPLAY VOLTAGE AND DECAY TIME INFORMATION AND A CHART RECORDER IS NOT NECESSARY.' PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGINNING WITH 'IF THE SPECIMEN DID' IN ITS ENTIRETY. PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: 'RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING POLARITY) AND DECAY TIME TO 10% OF THE MAXIMUM VOLTAGE LEVEL ACHIEVED.' PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING PRIOR TO 1ST SENTENCE: 'REVERSE VOLTAGE POLARITY REPEAT MEASUREMENT, ANDRECORD RESULTS.' PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: 'THE AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE SHALL BE INCLUDED FOR EACH OF THE WARP & FILLING DIRECTIONS, AS WELL AS THE OVERALL AVERAGE, FOR EACHFABRIC TESTED. THESE WILL BE OBTAINED BY AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF) TOGETHER FOR BOTH VOLTAGEPOLARITIES. UNLESS OTHERWISE STATED IN THE REQUIREMENTS DOCUMENT, THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THEAVERAGE MAXIMUM VOLTAGE IN BOTH THE WARP AND FILLING DIRECTIONS IS LESS THAN 4000 VOLTS, AND THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS GREATER THAN 0.5 SECONDS IN BOTH THE WARP AND FILLING DIRECTIONS. IT SHALL BE INDICATED WHETHER THE FABRIC ISACCEPTABLE OR NON-ACCEPTABLE.' PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE 406C AND SUBSTITUTE WITH '406D'. AFTER PARA. 7.1, ADD THE FOLLOWING: '7.2 NOTE: IF THE MODEL 406D STATIC DECAY METER, OR EQUIVALENT, IS USED, A CHART RECORDER ISNOT MANDATORY FOR THE TEST.' DEPARTMENT OF DEFENSE INDEX OF SPECIFICATIONS AND STANDARDS. PART I AND II, JULY 2000 AND SUPPLEMENT, MARCH 2000 ADDITIONAL INFORMATION FOR FED-STD-595C: COPIES OF FED-STD-595 CAN BE OBTAINED FROM: GENERAL SERVICES ADMINISTRATION - FEDERAL SUPPLY SERVICE BUREAU SPECIFICATION SECTION, SUITE 8100 470 EAST L'ENFANT PLAZA, SW WASHINGTON, DC 20407 PHONE (202) 619-8925. ADDITIONAL INFORMATION FOR FED-STD-601: . NO ADDITIONAL INFORMATION FOLLOWS. (Ref. T0214) . INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2 STANDARD INSPECTION. ADDITIONAL INFORMATION FOR MIL-STD-105E: NOTE: MIL-STD-105 HAS BEEN CANCELLED AND REPLACED BY THE FOLLOWING: 'AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) ANSI/ASQC Z1.4 - SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES'. APPLICATION FOR COPIES SHOULD BE OBTAINED FROM: AMERICAN SOCIETY FOR QUALITY CONTROL 611 EAST WISCONSIN AVE MILWAUKEE, WI 53202 ADDITIONAL INFORMATION FOR MIL-STD-1487: NO ADDITIONAL INFORMATION FOLLOWS. (Ref. - T0338 - 04/10/07) ADDITIONAL INFORMATION FOR MIL-I-45208: NOTE: MIL-I-45208 HAS BEEN CANCELLED AND REPLACED BY THE FOLLOWING: INTERNATIONAL STANDARDS ISO 9001:2000 OR AMERICAN SOCIETY FOR QUALITY ASQ 2003 VERSION. HIGHER LEVEL INSPECTION SYSTEM: THE INSPECTION SYSTEM(S) MUST BE SUBMITTED WITH YOUR BID PROPOSAL FOR EVALUATION AND APPROVAL BY DLA TROOP SUPPORT'S CONTRACTING OFFICER. INSPECTION SYSTEM(S) COMPLIANT/BUT ARE NOT LIMITED TO THE INTERNATIONAL STANDARDS ISO 9002 OR ASQ 2003 MAY BE UTILIZED IF TAILORED TO THE SPECIFIC QUALITY ASSURANCE REQUIREMENTS IN THIS SOLICITATION. MIL-STD-129P, WITH CHANGE 4 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR SHIPMENT AND STORAGE - DATED 19 SEPTEMBER 2007 INTERIM CHANGES: OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C &T) DIRECTORATE: THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT. IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS 'PACKING LIST HERE' SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER. MIL-STD-147 IS HEREBY REINSTATED AS FOLLOWS: MIL-STD-147E DEPARTMENT OF DEFENSE 16 MAY 2008 STANDARD PRACTICE PALLETIZED UNIT LOADS STANDARDS (COMMERCIAL) ASME-MH1 American Society of Mechanical Engineers (ASME) Pallets, Slip Sheets, and Other Bases For Unit Loads, for construction of pallets. ADDITIONAL INFORMATION FOR ASTM D3951-90: NO ADDITIONAL INFORMATION FOLLOWS. (Ref. T0356 - 7/12/06) 252.211-7006 - RADIO FREQUENCY IDENTIFICATION (RFI) Required (ref. T8379; Nov. 08, 2006) ADDITIONAL INFORMATION FOR MIL-STD-2073-1: NO ADDITIONAL INFORMATION FOLLOWS MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. Packaging examination. The fully packaged end item shall be examined for the defects listed below. The lot size shall be expressed in units of shipping containers. The sample unit shall be one shipping container fully packaged. The Inspection level shall be S-2 and the AQL, expressed in terms of defects per hundred units, shall be 2.5. Examine Defect Marking Omitted; incorrect; illegible, of (exterior) improper size, location, sequence & Unit Pack, or method of application. Materials Any component missing, damaged or not as specified. Workmanship Inadequate application of components, such as: incomplete closure of container flaps, loose strapping, improper taping, or inadequate stapling. Bulged or distorted container. Contents Number of intermediate containers per shipping container is more or less than required. Number of items per container is more or less than required. Palletization examination. The fully packaged and palletized end items shall be examined for the defects listed below. The lot size shall be expressed in units of palletized unit loads. The sample unit shall be one palletized unit load, fully packaged. The Inspection level shall be S-1 and the AQL, expressed in terms of defects per hundred units, shall be 6.5. Examine Defect Finished Length, width or height exceeds Dimensions specified maximum requirement. Palleti- Pallet pattern not as specified. zation Interlocking of loads not as specified. Load not bonded with required straps as specified. Weight Exceeds maximum load limits. Marking Omitted; incorrect; illegible; of improper size, location, sequence or method of appli- cation. PRES/PACK C/C TO ASTM-D-3951 ROLLS OF CLOTH SHALL BE PACKAGED/ PACKED IAW ASTM 3951. ANY ACCEPTABLE COMMERCIAL PACKAGING/PACKING MAY BE USED PROVIDED THAT IT AFFORDS ADEQUATE PROTECTION AGAINST PHYSICAL DAMAGE DURING SHIPMENT FROM THE SUPPLY SOURCE TO THE RECIEVING ACTIVITY. THE SUPPLIER MAY USE HIS STANDARD PRACTICE WHEN IT MEETS THIS REQUIREMENT. PKG / PACKING ANY ACCEPTABLE COMMERCIAL PACKAGING/PACKING MAY BE USED PROVIDED THAT IT AFFORDS ADEQUATE PROTECTION AGAINST PHYSICAL DAMAGE DURING SHIPMENT FROM THE SUPPLY SOURCE TO THE RECIEVING ACTIVITY. THE SUPPLIER MAY USE HIS STANDARD PRACTICE WHEN IT MEETS THIS REQUIREMENT. IF PALLETIZING, COMMERCIAL PALLETIZATION ON PALLETS OTHER THAN 40X48 IS ACCEPTABLE PROVIDED PALLETS ARE TREATED AS SPECIFIED. I/A/W A-A-55308 BASIC DTD 2006 OCT 03 AMEND NR TYPE NUMBER: I/A/W STD NR FED-STD-191A(6) NOT 7 REFNO DTD 2006 OCT 03 AMEND NR A TYPE NUMBER: I/A/W STD NR FED-STD-595C(1) REFNO DTD 2006 OCT 03 AMEND NR C TYPE NUMBER: I/A/W STD NR FED-STD-601(7) REFNO DTD 2006 OCT 03 AMEND NR TYPE NUMBER: I/A/W SPEC NR L-P-375D NOT 1 REFNO DTD 2006 OCT 03 AMEND NR D TYPE NUMBER: I/A/W SPEC NR MIL-P-43334C REFNO DTD 2006 OCT 03 AMEND NR C TYPE NUMBER: I/A/W STD NR MIL-STD-105E NOT 3 REFNO DTD 2006 OCT 03 AMEND NR E TYPE NUMBER: I/A/W STD NR MIL-STD-129P(4) REFNO DTD 2006 OCT 03 AMEND NR P TYPE NUMBER: I/A/W STD NR MIL-STD-147E REFNO DTD 2006 OCT 03 AMEND NR E TYPE NUMBER: I/A/W STD NR MIL-STD-1487 NOT 2 REFNO DTD 2006 OCT 03 AMEND NR TYPE NUMBER: I/A/W STD NR MIL-STD-2073-1E(1) REFNO DTD 2006 OCT 03 AMEND NR E TYPE NUMBER: I/A/W SPEC NR PPP-P-1136D NOT 1 REFNO DTD 2006 OCT 03 AMEND NR D TYPE NUMBER: CLIN PR PRLI U/I QUANTITY UNIT PRICE TOTAL PRICE 0001 0045041540 0001 YD 16600 $ $ NSN UPC SIZE PGC 8305003518346 718020224329 N/A 11276 DELIVER FOB: See Clause QTY VARIANCE: PLUS 5% MINUS 5% INSP/ACCEP POINT: See Clause PREP FOR DELIVERY: PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP = 001: PRES MTHD = 10: CLNG/DRY = 0: PRESV MAT = 00: WRAP MAT = 00: CUSH/DUNN MAT = 00: CUSH/DUNN THKNESS = 0: UNIT CONT = ZZ: OPI = O: PACK CODE = : PACKING LEVEL = B: MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE: 00 - 00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED 8183 SUPPLEMENTAL INSTRUCTIONS PRES/PACK C/C TO ASTM-D-3951 ASTM-D-5118. PRES/PACK C/C TO ASTM-D-3951 ROLLS OF CLOTH SHALL BE PACKAGED/ PACKED IAW ASTM 3951. ANY ACCEPTABLE COMMERCIAL PACKAGING/PACKING MAY BE USED PROVIDED THAT IT AFFORDS ADEQUATE PROTECTION AGAINST PHYSICAL DAMAGE DURING SHIPMENT FROM THE SUPPLY SOURCE TO THE RECIEVING ACTIVITY. THE SUPPLIER MAY USE HIS STANDARD PRACTICE WHEN IT MEETS THIS REQUIREMENT. PKG / PACKING ANY ACCEPTABLE COMMERCIAL PACKAGING/PACKING MAY BE USED PROVIDED THAT IT AFFORDS ADEQUATE PROTECTION AGAINST PHYSICAL DAMAGE DURING SHIPMENT FROM THE SUPPLY SOURCE TO THE RECIEVING ACTIVITY. THE SUPPLIER MAY USE HIS STANDARD PRACTICE WHEN IT MEETS THIS REQUIREMENT. IF PALLETIZING, COMMERCIAL PALLETIZATION ON PALLETS OTHER THAN 40X48 IS ACCEPTABLE PROVIDED PALLETS ARE TREATED AS SPECIFIED. . For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is not required as part of the Military Shipping Label and may be left blank. If there are inconsistencies between the schedule and MIL-STD-129P, the schedule takes precedence. PARCEL POST ADDRESS: SW3121 DLA DISTRIBUTION ALBANY TRANSPORTATION OFFICER 814 RADFORD BLVD BLDG 1221 DOOR 20 ALBANY GA 31704-1128 US FREIGHT SHIPPING ADDRESS SW3121 DLA DISTRIBUTION ALBANY DDAG-T MCLB BLDG 1221 DOOR 20 814 RADFORD BLVD ALBANY GA 31704-1128 US * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * CLIN PR PRLI U/I QUANTITY UNIT PRICE TOTAL PRICE 0002 0045041540 0002 YD 16600 $ $ NSN UPC SIZE PGC 8305003518346 718020224329 N/A 11276 DELIVER FOB: See Clause QTY VARIANCE: PLUS 5% MINUS 5% INSP/ACCEP POINT: See Clause PREP FOR DELIVERY: PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 MIL-STD-2073 PACKAGING DATA SAME AS PRIOR LINE PARCEL POST ADDRESS: SW3121 DLA DISTRIBUTION ALBANY TRANSPORTATION OFFICER 814 RADFORD BLVD BLDG 1221 DOOR 20 ALBANY GA 31704-1128 US FREIGHT SHIPPING ADDRESS SW3121 DLA DISTRIBUTION ALBANY DDAG-T MCLB BLDG 1221 DOOR 20 814 RADFORD BLVD ALBANY GA 31704-1128 US * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * CLIN PR PRLI U/I QUANTITY UNIT PRICE TOTAL PRICE 0003 0045041540 0003 YD 16600 $ $ NSN UPC SIZE PGC 8305003518346 718020224329 N/A 11276 DELIVER FOB: See Clause QTY VARIANCE: PLUS 5% MINUS 5% INSP/ACCEP POINT: See Clause PREP FOR DELIVERY: PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 MIL-STD-2073 PACKAGING DATA SAME AS PRIOR LINE PARCEL POST ADDRESS: SW3121 DLA DISTRIBUTION ALBANY TRANSPORTATION OFFICER 814 RADFORD BLVD BLDG 1221 DOOR 20 ALBANY GA 31704-1128 US FREIGHT SHIPPING ADDRESS SW3121 DLA DISTRIBUTION ALBANY DDAG-T MCLB BLDG 1221 DOOR 20 814 RADFORD BLVD ALBANY GA 31704-1128 US * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * A00E01 CAUTION NOTICE - C&T ELECTRONIC INVOICING (OCT 2007) DLA TROOP SUPPORT The Directorate of Clothing and Textiles (C&T) requires electronic invoicing on all contracts unless another method is mutually agreed to by the Contractor, the Contracting Officer, the contract administration office, and the payment office. UTILIZATION OF WIDE AREA WORKFLOW - RECEIPTS AND ACCEPTANCE (WAWF-RA) IN CONJUNCTION WITH DFARS 252.232-7003, Electronic Submission of Payment Requests. The Directorate of Clothing and Textiles utilizes VIM-ASAP, which is short for DLA Virtual Item Manager ARN Supply-Chain Automated Processing, to transmit data to WAWF-RA. VIM-ASAP is the only authorized method to electronically process requests for payment to WAWF-RA for the Directorate of Clothing and Textiles. VIM-ASAP will give you visibility of contract information, track production status and print labels. VIM-ASAP pre-populates contract data on your invoices, such as unit price, contract numbers, item numbers, addresses, and many other fields that will save you labor and time. Advanced Shipment Notifications (ASNs) associated with DFARS clause 252.211-7006, Radio Frequency Identification are sent via VIM-ASAP to WAWF-RA processes. Please contact the VIM-ASAP help desk at 888-940-7348 to get started today! For questions about invoice preparation, just call the DFAS Customer Service Resource Center at 1-800-756-4571, or Check out these resources: http://www.dfas.mil/contractorpay.html ...under the 'Contractor/Vendor Pay' link. http://www.dfas.mil/ ... information regarding bill paying process and additional points of contact. A00E02 CAUTION NOTICE - STOP SHIPMENT DELAYS AND REJECTIONS! (OCT 2010) DLA TROOP SUPPORT For deliveries to New Cumberland DDC depot or the 3PL-Third Party Logistics locations (Travis Industries for the Blind, LA3P, Peckham Vocational Industries), ensure your Government or Commercial Bills of Lading are correctly annotated with the following information in the description of articles: Weight Pieces National Stock Number(s) (NSNs) Contract Number For New Cumberland only, also include: Door #s 113-134 - Mission Delivery (storage) -- or -- Door #s 135-168 - Container Consolidation Point (CCP) Delivery(OCONUS) (whichever applies to your freight) For the 3PL sites only, also include: Shipment number Delivery appointments are required for these locations. Your truckers/dispatchers/brokers/etc. should have the above information readily available when calling to schedule delivery appointments as follows: New Cumberland DDC - 717.770.6969 Travis Association for the Blind - 512.615.4701 LA3P - 706.693.1918 Peckham Vocational Industries - 517.316.4110 A00E03 CAUTION NOTICE - Small Business Set-Aside & FPI (OCT 2010) DLA TROOP SUPPORT (C&T) This solicitation has been issued pursuant to Section 827 of the FY 2008 DoD Authorization Act, specifically, DFARS 208.602(a)(ii). A timely offer from the Federal Prison Industries (FPI) will be considered for award in accordance with the specifications and evaluation factors delineated in this solicitation. If this solicitation is set-aside for small business participation and is being issued pursuant to DLAD 8.602(a)(ii)(90) and 19.502-1(b)(90). See provision 52.219-9001, Set-Asides of Acquisitions of Items Listed in the Schedule of Products Made in Federal Penal and Correctional Institutions, for additional information. A00E04 NOTICE TO CONSIGNEE (MAR 2004) DLA TROOP SUPPORT This contract/order contains the clause at 52.213-1, Fast Payment Procedure. The contractor shall mark outer shipping containers 'FAST PAY'. CONSIGNEE'S NOTIFICATION TO PURCHASING ACTIVITY OF NONRECEIPT, DAMAGE, OR NONCONFORMANCE The consignee shall notify the purchasing office promptly after the specified date of delivery of supplies not received, damaged in transit, or not conforming to specifications of the purchase order. Unless extenuating circumstances exist, the notification should be made not later than 60 days after the specified date of delivery. A00E29 CAUTION - CONTRACTOR CODE OF BUSINESS ETHICS (DEC 2010) DLA TROOP SUPPORT FAR Part 3.1002(a) requires all government contractors to conduct themselves with the highest degree of integrity and honesty. Contractors should have a written code of business ethics and conduct. To promote compliance with such code of business ethics and conduct, contractors should have an employee business ethics and compliance training program that facilitates timely discovery and disclosure of improper conduct in connection with government contracts and ensures corrective measures are promptly instituted and carried out. A contractor may be suspended and/or debarred for knowing failure by a principal to timely disclose to the government, in connection with the award, performance, or closeout of a government contract performed by the contractor or a subcontract awarded there under, credible evidence of a violation of federal criminal law involving fraud, conflict of interest, bribery, or gratuity violations found in title 18 of the United States Code or a violation of the False Claims Act. (31 U.S.C. 3729-3733) If this solicitation or contract includes FAR clause 52.203-13 - CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT; contained elsewhere in the solicitation or contract, the contractor shall comply with the terms of the clause and have a written code of business ethics and conduct; exercise due diligence to prevent and detect criminal conduct; promote ethical conduct and a commitment to compliance with the law within their organization; and timely report any violations of federal criminal law involving fraud, conflict of interest, bribery or gratuity violations found in title 18 of the United States Code or any violations of the False Claims Act. (31 U.S.C. 3729-3733) SECTION D D11B03 252.211-7006 PASSIVE RADIO FREQUENCY IDENTIFICATION (SEP 2011) DFARS (a) Definitions. As used in this clause- 'Advance shipment notice' means an electronic notification used to list the contents of a shipment of goods as well as additional information relating to the shipment, such as passive radio frequency identification (RFID) or item unique identification (IUID) information, order information, product description, physical characteristics, type of packaging, marking, carrier information, and configuration of goods within the transportation equipment. 'Bulk commodities' means the following commodities, when shipped in rail tank cars, tanker trucks, trailers, other bulk wheeled conveyances, or pipelines: (1) Sand. (2) Gravel. (3) Bulk liquids (water, chemicals, or petroleum products). (4) Ready-mix concrete or similar construction materials. (5) Coal or combustibles such as firewood. (6) Agricultural products such as seeds, grains, or animal feed. 'Case' means either a MIL-STD-129 defined exterior container within a palletized unit load or a MIL-STD-129 defined individual shipping container. 'Electronic Product Code: (EPC)' means an identification scheme for universally identifying physical objects via RFID tags and other means. The standardized EPC data consists of an EPC (or EPC identifier) that uniquely identifies an individual object, as well as an optional filter value when judged to be necessary to enable effective and efficient reading of the EPC tags. In addition to this standardized data, certain classes of EPC tags will allow user-defined data. The EPC tag data standards will define the length and position of this data, without defining its content. 'EPCglobal:' means a subscriber-driven organization comprised of industry leaders and organizations focused on creating global standards for the adoption of passive RFID technology. 'Exterior container' means a MIL-STD-129 defined container, bundle, or assembly that is sufficient by reason of material, design, and construction to protect unit packs and intermediate containers and their contents during shipment and storage. It can be a unit pack or a container with a combination of unit packs or intermediate containers. An exterior container may or may not be used as a shipping container. 'Palletized unit load' means a MIL-STD-129 defined quantity of items, packed or unpacked, arranged on a pallet in a specified manner and secured, strapped, or fastened on the pallet so that the whole palletized load is handled as a single unit. A palletized or skidded load is not considered to be a shipping container. A loaded 463L System pallet is not considered to be a palletized unit load. Refer to the Defense Transportation Regulation, DoD 4500.9-R, Part II, Chapter 203, for marking of 463L System pallets. 'Passive RFID tag' means a tag that reflects energy from the reader/interrogator or that receives and temporarily stores a small amount of energy from the reader/interrogator signal in order to generate the tag response. The only acceptable tags are EPC Class 1 passive RFID tags that meet the EPCglobal Class 1 Generation 2 standard. 'Radio frequency identification (RFID)' means an automatic identification and data capture technology comprising one or more reader/interrogators and one or more radio frequency transponders in which data transfer is achieved by means of suitably modulated inductive or radiating electromagnetic carriers. 'Shipping container' means a MIL-STD-129 defined exterior container that meets carrier regulations and is of sufficient strength, by reason of material, design, and construction, to be shipped safely without further packing (e.g., wooden boxes or crates, fiber and metal drums, and corrugated and solid fiberboard boxes). (b)(1) Except as provided in paragraph (b)(2) of this clause, the Contractor shall affix passive RFID tags, at the case- and palletized-unit-load packaging levels, for shipments of items that- (i) Are in any of the following classes of supply, as defined in DoD 4140.1-R, DoD Supply Chain Materiel Management Regulation, AP1.1.11: (A) Subclass of Class I - Packaged operational rations. (B) Class II - Clothing, individual equipment, tentage, organizational tool kits, hand tools, and administrative and housekeeping supplies and equipment. (C) Class III - Packaged petroleum, lubricants, oils, preservatives, chemicals, and additives. (D) Class IV - Construction and barrier materials. (E) Class VI - Personal demand items (non-military sales items). (F) Subclass of Class VIII - Medical materials (excluding pharmaceuticals, biologicals, and reagents - suppliers should limit the mixing of excluded and non-excluded materials). (G) Class IX - Repair parts and components including kits, assemblies and subassemblies, reparable and consumable items required for maintenance support of all equipment, excluding medical-peculiar repair parts; and (ii) Are being shipped to one of the locations listed at http://www.acq.osd.mil/log/rfid/ or to - (B) The following location(s) deemed necessary by the requiring activity: Contract Line, Subline, or Exhibit Line Location City State DoDACC Item Number Name (2) The following are excluded from the requirements of paragraph (b)(1) of this clause: (i) Shipments of bulk commodities. (ii) Shipments to locations other than Defense Distribution Depots when the contract includes the clause at FAR 52.213-1, Fast Payment Procedures. (c) The Contractor shall- (1) Ensure that the data encoded on each passive RFID tag are globally unique (i.e., the tag ID is never repeated across two or more RFID tags and conforms to the requirements in paragraph (d) of this clause; (2) Use passive tags that are readable; and (3) Ensure that the passive tag is affixed at the appropriate location on the specific level of packaging, in accordance with MIL-STD-129 (Section 4.9.2) tag placement specifications. (d) Data syntax and standards. The Contractor shall encode an approved RFID tag using the instructions provided in the EPC: Tag Data Standards in effect at the time of contract award. The EPC: Tag Data Standards are available at http://www.epcglobalinc.org/standards/. (1) If the Contractor is an EPCglobal: subscriber and possesses a unique EPC: company prefix, the Contractor may use any of the identifiers and encoding instructions described in the most recent EPC: Tag Data Standards document to encode tags. (2) If the Contractor chooses to employ the DoD identifier Type, the Contractor shall use its previously assigned Commercial and Government Entity (CAGE) Code and shall encode the tags in accordance with the tag identity type details located at http://www.acq.osd.mil/log/rfid/tag_data.htm. If the Contractor uses a third party packaging house to encode its tags, the CAGE code of the third-party packaging house is acceptable. (3) Regardless of the selected encoding scheme, the Contractor with which the Department holds the contract is responsible for ensuring that the tag ID encoded on each passive RFIS tag is globally unique, per the requirements in paragraph (c)(1). (e) Advance shipment notice. The Contractor shall use Wide Area WorkFlow (WAWF), as required by DFARS 252.232-7003, Electronic Submission of Payment Requests, to electronically submit advance shipment notice(s) with the RFID tag IDs (specified in paragraph (d) of this clause) in advance of the shipment in accordance with the procedures at https://wawf.eb.mil/ D11C02 52.211-9010 SHIPPING LABEL REQUIREMENTS - MILITARY STANDARD (MIL-STD) 129P (NOV 2011) DLAD D11C03 52.211-9010 SHIPPING LABEL REQUIREMENTS - MILITARY STANDARD (MIL-STD) 129P (NOV 2011) ALT I (AUG 2005) D11C08 52.211-9033 PACKAGING AND MARKING REQUIREMENTS (APR 2008) DLAD D47C01 52.247-9012 REQUIREMENTS FOR TREATMENT OF WOOD PACKAGING MATERIAL (WPM) (FEB 2007) DLAD (a) THIS CLAUSE ONLY APPLIES WHEN WOOD PACKAGING MATERIAL (WPM) WILL BE USED TO MAKE SHIPMENTS UNDER THIS CONTRACT AND/OR WHEN WPM IS BEING ACQUIRED UNDER THIS CONTRACT. (b) Definition. Wood packaging material (WPM) means wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. The definition excludes materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). (c) All Wood Packaging Material (WPM) used to make shipments under DOD contracts and/or acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, 'Guidelines for Regulating Wood Packaging Materials in International Trade.' DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo. (1) All WPM shall comply with the official quality control program for heat treatment (HT) or kiln dried heat treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/). (2) All WPM shall include certification/quality markings in ac...

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Andrew Chmielewski
Fax: 215.737.2136

Documents

No documents available.

Lifecycle

Solicitation:SPM1C112Q0293
  1. Combined Synopsis
  1. Combined SynopsisCurrentMar 22, 2012

    Cloth, Laminate

    Notice b465171c7008cb8b757d18e7e5e25d90 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

SPM1C112Q0293

Archive Date

Jul 3, 2019