GovChime
Notice ID: 8b6b7ab209cf0fe0a12478b41ffc1102Solicitation

39--Heat Sealing Machine

Archived on January 31, 2012. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
6:00 AM UTC+01:00
Posted
January 25, 2012
Notice type
Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
333993: Packaging Machinery Manufacturing
Agency
Department of WarDEFENSE LOGISTICS AGENCY

Notice details

Office
DLA MARITIME - NORFOLK
Place of performance
Trident Facility, Kings Bay, GA 31547 US
PSC
39: MATERIALS HANDLING EQPT
Last updated
Dec 5, 2025

Identifiers

Solicitation number
SPMYM112T0025
Notice ID
8b6b7ab209cf0fe0a12478b41ffc1102

Description

The Defense Logistics Agency, DLA Maritime Norfolk, Norfolk Naval Shipyard (NNSY) Contracting Office, intends to negotiate a Firm Fixed Price contract to procure the following item. The North American Industry Classification System (NAICS) code is 333993 (Packaging Machinery Manufacturing) and the procurement will be 100% set aside for Small Business. The contract line item is follows: CLIN 0001 Heat Sealing Machine, PFAFF Model #8320-001/001 OR EQUAL with installation and setup and meeting the following salient ordering characteristics: The requested equipment must have the following dimensions: Length shall be 44 inches (1100 mm) Width shall be 28 inches (700 mm) Height shall be 56 inches (1400 mm) Must have clearance between rollers (20mm) Must have clearance width of (480 mm) The requested equipment must not weigh more than 350 lbs. (140 kg) The requested equipment must come equipped with the following wedge sizes: ¼ ?, .35 ?, ½ ?, .6 ?, ¾ ?, 1.2 ?, 1.5 ? ( 7mm, 9mm, 12mm, 15mm, 20mm, 30mm, 40mm) The requested equipment must have a sealing speed of 30FT/Minute. The requested equipment must have a maximum sealing temperature of 900 degrees F (500 degrees C) The requested equipment must have an input voltage of 230vac single phase 60 hertz, and input power not to exceed 1500 W and a hot wedge heating capacity not to exceed 1000 W The request equipment must have powered upper and lower wheels driven by belts not chains. The requested equipment must be equipped with a one touch screen with 100 percent parameter control. All parameters are to be controlled electronically, and an integrated control board must monitor heat sealing temperature, roller pressure and the motors that control the upper/lower roller. The requested equipment must be equipped with proportional valves which enable adjustment of the roller pressure. The requested equipment must be equipped with adjustable stand height, hand crank to adjust working height. Request selected manufacturer perform delivery, installation and set-up of equipment. The solicitation number is SPMYM1-12-T-0025 and a copy will be posted no later than 20JAN2012. Technical questions must be written and sent by email to kyra.fagan@navy.mil or by fax to (757) 396-9895. Alternate POC is Bonnie Parker (757) 396-0282, bonnie.parker@navy.mil. Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at either www.neco.navy.mil or www.fedbizopps.gov, as this office no longer issues hard-copy solicitations. By submitting a proposal, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency. Through its submission, the vendor acknowledges the requirement that a prospective awardee must be registered in the Central Contract Registration (CCR) database prior to award, during performance, and through final payment of any contract resulting from this solicitation, except for award to foreign vendors for work to be performed outside the United States. Lack of registration in the CCR will render the vendor ineligible for award.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Kyra Fagan (757) 396-8346 Contract Specialist's Email Address

Documents

No documents available.

Lifecycle

Solicitation:SPMYM112T0025
  1. Pre-Solicitation
  2. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. 2×
    Pre-SolicitationJan 19, 2012

    39--Heat Sealing Machine

    Notice 811b3641b08be7ea6575f8447f1ec384 on SAM.gov

  2. SolicitationCurrentJan 25, 2012

    39--Heat Sealing Machine

    Notice 8b6b7ab209cf0fe0a12478b41ffc1102 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

SPMYM112T0025

Archive Date

Jan 31, 2012