Notice ID: e676f3f9756241a89a9b4645e52bf805Combined Synopsis/Solicitation
TOOLS
Archived on July 20, 2023. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 11:59 PM UTC−04:00
- Posted
- June 30, 2023
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 332510: Hardware Manufacturing
- Agency
- Department of WarDEFENSE LOGISTICS AGENCY
Notice details
- Office
- DLA MARITIME - NORFOLK
- Place of performance
- Portsmouth, VA, 23709
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- SPMYM123Q0073
- Notice ID
- e676f3f9756241a89a9b4645e52bf805
Description
SYNOPSIS: The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract as Brand Name Specific with Lowest Price Technically Acceptable (LPTA) Evaluation Factors for the item listed below. The required item is for commercial item prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice. The Contract Line Item (CLIN) is as follows: -CLIN 0001 QTY = 1 EA MATERIAL: SHELL MILL HOLDER DESCRIPTION: BCV40-SMC1 .000-2 1 0 SHELL MILL HOLDER, BIG-PLUS CAT40X01XL2.0 -CLIN 0002 QTY = 2 EA MATERIAL: HI-POWER MILL CHUCK DESCRIPTION: BIG BCV40-HMC.500J-2.5 HI-POWER MILL CHUCK FOR HEAVY DUTY END MILLING -CLIN 0003 QTY = 1 EA MATERIAL: FK WRENCH DESCRIPTION: FK31-33 FK WRENCH, 031-33MM -CLIN 0004 QTY = 11 EA MATERIAL: MILLING CHUCKS - MEG DESCRIPTION: BCV40-MEGA 13E-3NL CLAMPING RANGE: 0.125"-.500" (03-12MM) EXCLUSIVELY FOR HIGH SPEED FINISH END MILLING MEGA E NUT IS INCLUDED, COLLET, WRENCH AND ADJUSTING SCREW MUST BE ORDERED SEPARATELY -CLIN 0005 QTY = 1 EA MATERIAL: WRENCH 42MM DESCRIPTION: MGR42 THE ONE-DIRECTION CLUTCH SYSTEM ALLOWS NUTS TO BE TIGHTENED UNIFORMLY AROUND THE WHOLE CIRCUMFERENCE. IT ELIMINATES THE RISK OF THE WRENCH COMING OFF DURING WORK. -CLIN 0006 QTY = 11 EA MATERIAL: ADJUSTING SCREW DESCRIPTION: NBA13B USE TO ADJUST THE PROJECTION LENGTH OF TOOLS. / USE TO ADJUST THE PROJECTION LENGTH OF ENDMILLS. -CLIN 0007 QTY = 2 EA MATERIAL: MEGA E COLLET .125 DESCRIPTION: MEC13-1/8AA USE THE GRIP SHANK FOR ITEMS WITHIN H7 TOLERANCE. -CLIN 0008 QTY = 1 EA MATERIAL: MEGA E COLLET .137 DESCRIPTION: MEC13-3/16AA USE THE GRIP SHANK FOR ITEMS WITHIN H7 TOLERANCE. -CLIN 0009 QTY = 2 EA MATERIAL: MEGA E COLLET .250 DESCRIPTION: MEC13-1/4AA USE THE GRIP SHANK FOR ITEMS WITHIN H7 TOLERANCE. -CLIN 0010 QTY = 3 EA MATERIAL: MEGA E COLLET .375 DESCRIPTION: MEC13-3/8AA USE THE GRIP SHANK FOR ITEMS WITHIN H7 TOLERANCE. -CLIN 0011 QTY = 3 EA MATERIAL: MEGA E COLLET .500 DESCRIPTION: MEC13-1/2AA USE THE GRIP SHANK FOR ITEMS WITHIN H7 TOLERANCE. -CLIN 0012 QTY = 2 EA MATERIAL: MEGA E PERFECT SEAL DESCRIPTION: EPS13-04 A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0013 QTY = 1 EA MATERIAL: MEGA E PERFECT SEAL DESCRIPTION: EPS13-05 MEGA E PERFECT SEAL, EPS (EPS13-05) A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0014 QTY = 2 EA MATERIAL: MEGA E PERFECT SEAL DESCRIPTION: EPS13-07 MEGA E PERFECT SEAL, EPS (EPS13-07) A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0015 QTY = 3 EA MATERIAL: MEGA E PERFECT SEAL DESCRIPTION: EPS13-10 MEGA E PERFECT SEAL, EPS (EPS13-10) A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0016 QTY = 3 EA MATERIAL: MEGA E PERFECT SEAL DESCRIPTION: EPS13-13 MEGA E PERFECT SEAL, EPS (EPS13-13) A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE -CLIN 0017 QTY = 10 EA MATERIAL: MILLING CHUCKS - MEG DESCRIPTION: BCV40-MEGA 16N-2.5 MILLING CHUCKS - MEGA NEW BABY CHUCK AND NUT SET, ADJUSTABLE SCREW (BCV40-MEGA16N-2.5) CLAMPING RANGE: 0.010"-1.000" FOR DRILLS, REAMERS, TAPS & FINISHING END MILLS MEGA NEW BABY NUT IS INCLUDED, COLLET, WRENCH AND ADJUSTING SCREW MUST BE ORDERED SEPARATELY -CLIN 0018 QTY = 10 EA MATERIAL: ADJUSTMENT SCREW, NB DESCRIPTION: NBA16B USE TO ADJUST THE PROJECTION LENGTH OF TOOLS. / USE TO ADJUST THE PROJECTION LENGTH OF ENDMILLS. -CLIN 0019 QTY = 1 EA MATERIAL: BABY CHUCK AND NUT DESCRIPTION: BCV40-MEGA20N-2.5 MEGA NEW BABY CHUCK AND NUT SET, ADJUSTABLE SCREW (BCV40-MEGA20N-2.5) CLAMPING RANGE: 0.010"-1.000" FOR DRILLS, REAMERS, TAPS & FINISHING END MILLS -CLIN 0020 QTY = 1 EA MATERIAL: ADJUSTMENT SCREW DESCRIPTION: NBA20B ADJUSTMENT SCREW (NBA20B) TO BE USED FOR ADJUSTING PROTRUSION LENGTH -CLIN 0021 QTY = 1 EA MATERIAL: MEGA WRENCH DESCRIPTION: MGR46 MEGA WRENCH (MEGA CHUCK SERIES) (MGR46) THE ONE-DIRECTION CLUTCH SYSTEM ALLOWS NUTS TO BE TIGHTENED UNIFORMLY AROUND THE WHOLE CIRCUMFERENCE. IT ELIMINATES THE RISK OF THE WRENCH COMING OFF DURING WORK. -CLIN 0022 QTY = 1 EA MATERIAL: TOOL HOLDER STARTER DESCRIPTION: SNBC16 COLLET CHUCKS, MILLING CHUCK & INDEXABLE END MILL -CLIN 0023 QTY = 1 EA MATERIAL: HIGH PRECISION, MEGA DESCRIPTION: NBC20-19AA HIGH PRECISION, MEGA13N/16N/20N (NBC20-19.0-AA) THE WORLD-CLASS RUNOUT ACCURACY OF 1 lM AT THE NOSE DEMONSTRATES AN OUTSTANDING POWER EVEN AT SUPER HIGH SPEED ROTATION. -CLIN 0024 QTY = 2 EA MATERIAL: MEGA PERFECT SEAL, M DESCRIPTION: MPS16-03035 MEGA PERFECT SEAL, MPS (MPS16-03035) NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0025 QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M DESCRIPTION: MPS16-0304 MEGA PERFECT SEAL, MPS MPS16-0304 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0026 QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M DESCRIPTION: MPS16-0405 MEGA PERFECT SEAL, MPS MPS16-0405 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0027 QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M DESCRIPTION: MPS16-0506 MEGA PERFECT SEAL, MPS MPS16-0506 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0028 QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M DESCRIPTION: MPS16-06065 MEGA PERFECT SEAL, MPS MPS16-06065 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0029 QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M DESCRIPTION: MPS16-0708 MEGA PERFECT SEAL, MPS MPS16-0708 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0030 QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M DESCRIPTION: MPS16-09095 MEGA PERFECT SEAL, MPS MPS16-09095 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0031 QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M DESCRIPTION: MPS16-1011 MEGA PERFECT SEAL, MPS MPS16-1011 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0032 QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M DESCRIPTION: MPS16-11115 MEGA PERFECT SEAL, MPS MPS16-11115 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0033 QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M DESCRIPTION: MPS16-1213 MEGA PERFECT SEAL, MPS MPS16-1213 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0034 QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M DESCRIPTION: MPS16-1415 MEGA PERFECT SEAL, MPS MPS16-1415 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0035 QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M DESCRIPTION: MPS16-1516 MEGA PERFECT SEAL, MPS MPS16-1516 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0036 QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M DESCRIPTION: MPS20-1819 MEGA PERFECT SEAL, MPS MPS20-1819 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0037 QTY = 1 EA MATERIAL: SYNCH RO SHANK DESCRIPTION: BCV40-MGT6-3.25 MEGA SYNCHRO TAPPING HOLDER BCV40XMGT6XL3.25 -CLIN 0038 QTY = 1 EA MATERIAL: SYNCHRO TAPPING HOLD DESCRIPTION: BCV40-MGT12-3.25 MEGA SYNCHRO TAPPING HOLDER BCV40XMGT12XL3.25 -CLIN 0039 QTY = 1 EA MATERIAL: SYNCHRO TAPPING ADAP DESCRIPTION: MGT6-NO.6-3 SYNCHRO TAPPING ADAPTER -CLIN 0040 QTY = 1 EA MATERIAL: SYNCHRO TAPPING ADAP DESCRIPTION: MGT6-NO.8-3 SYNCHRO TAPPING ADAPTER -CLIN 0041 QTY = 1 EA MATERIAL: SYNCHRO TAPPING ADAP DESCRIPTION: MGT6-NO.10-3 SYNCHRO TAPPING ADAPTER -CLIN 0042 QTY = 1 EA MATERIAL: SYNCHRO TAPPING ADAP DESCRIPTION: MGT12-AU1/4-3 SYNCHRO TAPPING ADAPTER -CLIN 0043 QTY = 1 EA MATERIAL: TORQUE FIT BASE DESCRIPTION: TF-40 TORQUE FIT BASE -CLIN 0044 QTY = 1 EA MATERIAL: TOOLING MATE ADAPTER DESCRIPTION: TMA40-40 AN ADAPTER FOR TOOLING MATE The requirement will be solicited as a total small business set aside. The NAICS code applicable to this procurement is 332510 Hardware Manufacturing with a size standard of 750 employees. The Product Service Code is 5340. The solicitation document incorporates provisions and clauses in effect through FAC 2023-01 and DFARS Change Notice 10/28/2022. The anticipated delivery date for this acquisition is 31 JULY 2023. The solicitation, any documents related to this procurement, and all amendments issued will be in electronic form only. THE SOLICITATION IS NOT YET AVAILABLE. Quotes will be due by 12:00 PM EST on 14 FEB 2023. Responses to the solicitation notice shall be emailed to the attention of Jorge Arcelay at Jorge.Arcelay@dla.mil. Please make sure that the solicitation number (SPMYM123Q0073) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues. Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.SAM.gov (Contracting Opportunities). The Government is not responsible for inability of the Offeror's to access solicitation documents posted. Prospective Offeror's should also register at on the interested vendor list under SPMYM123Q0073. No telephone or FAX requests will be accepted, and no hardcopy solicitation/amendment will be mailed or faxed. All responsible sources may submit a proposal which may be considered by the Government. By submitting a quote, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. All questions shall be submitted in accordance with the solicitation, dates and procedures. Please direct all questions regarding this requirement to Jorge Arcelay at Jorge.Arcelay@dla.mil.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
SPMYM123Q0073- Combined Synopsis
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
DLA Aviation is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for CB ROTATING ASSY NSN 5340-01-493-6091. The result of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 332510. THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred. If your organization has the potential capacity to perform these contract services, please provide the following information: 1) Organization name, address, email address, Web site address, telephone number, and size and type of ownership for the organization; and 2) Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements. The government will evaluate market information to ascertain potential market capacity to 1) provide services consistent in scope and scale with those described in this notice and otherwise anticipated; 2) secure and apply the full range of corporate financial, human capital, and technical bad project management plan that includes: compliance with tight program schedules; cost containment; meeting and tracking performance; hiring and retention of key personnel and risk mitigation; and 4) provide services under a performance based service acquisition contract. BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET RESEARCH, THIS REQUIREMENT MAY BE SET-ASIDE FOR SMALL BUSINESSES OR PROCURED THROUGH FULL AND OPEN COMPETITION, and multiple awards MAY be made. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions. Submission Instructions: Interested parties who consider themselves qualified to perform the above-listed services are invited to submit a response to this Sources Sought Notice by close of business November 18, 2026. All responses under this Sources Sought Notice can be emailed to LaToya Green at latoya.green@dla.mil. If you have any questions concerning this opportunity, please contact: LaToya Green at (445) 737-4267, email at latoya.green@dla.mil. APPENDIX 1: Purpose and Objectives DLA-Aviation can only receive Source Approval Requests (SAR) through DoDSafe link due to internet/web safety concerns. To submit your SAR please send an email to: dlaavnsmallbus@dla.mil, subject line "Request a SAR drop off". Include CAGE code, the NSN and the email address where you want to receive the DoDSafe link. After your email is received, a DoDSafe drop off will be returned, where you can download your SAR file. The specific requirement for this effort is below: Part Number: 6511E90FN21, 6D59567-001 Nomenclature: CB ROTATING ASSY NSN: 5340-01-493-6091 Estimated Requirement: 12 each | 69% | Market Research | 11/18/2026 |
Purchase Request: 7014870398, NSN 5340-01-484-0048, RETAINER,HELICAL COMPRESSION SPRING, Part Number: 5D87604-002. Specifications, plans or drawings relating to the procurement described are not available and cannot be furnished by the Government. DLA Aviation does not currently have an approved technical data package for this item, therefore, please do not submit requests. Approved sources for this item are Northrop Grumman Systems Corporation CAGE 90099. Any manufacturer, other than the approved source, who would like to submit a proposal on this item, must submit a complete source approval package (SAR). This solicitation will result in a firm-fixed price contract. This requirement is for 25 each. The required delivery is 319 days ARO to NEW CUMBERLAND PA (line 0001). This is an Unrestricted Acquisition. FOB Origin, Inspection and Acceptance at Origin applies. This is not a Critical Safety Item. Supplier Performance Risk System (SPRS) applies. The final contract award decision may be based upon a combination of price, past performance and other evaluation factors as described in the solicitation. All responsible sources may submit an offer that will be considered. A copy of this solicitation will also be available to requesters by contacting the buyer directly. The estimated solicitation issue date is 10/06/2026. The anticipated closing date is 11/05/2026. Solicitation SPE4A627R0037 supersedes solicitation SPE4A626R0308. | 69% | Pre-Solicitation | 11/05/2026 |
THIS SOLICITATION AND ANY SUBSEQUENT AMENDMENTS WILL BE POSTED TO THE SAM WEBSITE: SAM.GOV ELECTRONIC SUBMISSION OF QUOTES IS AVAILABLE THROUGH THE SAM WEBSITE. To be considered for award, if the contractor (awardee) is required to implement NIST SP 800-171, the contractor (awardee) shall have a current assessment as detailed in DFARS 252.204-7019 (I.E., not more than 3 years old unless a lesser time is specified in the solicitation) **Items deemed to be Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 requirement. Must identify and provide information to contracting officer on bid during solicitation period** Please read the contract in its entirety. If you are able to provide a quote be sure to provide the following information in the sections provided below: Page 1 BLK 17a. Provide Contractor's info and cage code. Section A. A1 – 1. Enter The Contractor's POC Section B. – Enter your Quote and any other info we should know. Please quote FOB Destination BREMERTON, WA. Section B. K21 – Check the appropriate box and provide the Manufacturer’s Name, Address and the Country of Manufacturing Section F. – Provide the Lead Time and/or Delivery Date. Section K. - 52.204-24 (d)(1) and (2) Check the applicable boxes Section K. - 52.209-11 (b)(1) and (2) Check the applicable boxes Page 1 - Read box 28 and sign boxes 30 a, b, and c. Return the signed and filled out solicitation with your quote by 11/4/2026 by 2:00 pm FOR YOUR BID TO BE DEEMED RESPONSIVE A SIGNED AND COMPLETED SOLICITATION MUST BE SUBMITTED VIA EMAIL. EMAIL: karl.lindley@dla.mil Please be advised that all communications regarding this requirement are governed by the Procurement Integrity Act. In accordance with FAR 3.104, no proprietary bid information, pricing data, or source selection-sensitive metrics may be exchanged or solicited outside of authorized contracting channels. Thank you for your cooperation in maintaining a fair and ethical procurement process." | 67% | Solicitation | 11/04/2026 |
The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing straps IAW attached documents (Notes: Vendor shall list the country of origin for each line item & If not the actual manufacturer- Manufacturer's Name, Location, and Business Size must be provided) . *Referenced drawing will be provided with submission of attached security agreement AND active DD 2345 (Military Critical Tech Data Agreement)* NOTE: OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 52.204-24, 52.204-26, 2S2.204-7016, AND 252.204-7019AND INCLUDE THE COMPLETED PROVISIONS WITH THEIR OFFER. This announcement will close 11/02/2026 at 10:00 AM EST. All responsible sources may submit a quote which shall be considered by the agency. Please submit quotations via email at robert.s.dowdle.civ@us.navy.mil & also to: PNSYSupplyQuotations@us.navy.mil All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC) or Wide Area Workflow (WAWF). Please note that the Government's terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. | 67% | Combined Synopsis | 11/02/2026 |
Portsmouth Naval Shipyard has a requirement for 14" Handwheels. For additional information and details regarding the requirement, please refer to the Combined Synopsis Solicitation and RFQ forms in the Attachments section. | 67% | Combined Synopsis | 11/03/2026 |
Additional Details
Solicitation Number
SPMYM123Q0073
Archive Date
Jul 20, 2023
Office Address
PORTSMOUTH, VA, 23709-5000