GovChime
Notice ID: f263aa48c06a42e69b6957f263ec7a2dAward NoticeAwardedArchived

DNM6700-4G / 15K / 30 ATC MACHINE

Awarded on September 19, 2025. Full description on SAM.gov.

Awarded tounder SPMYM225P2537 (source: SAM.gov award notice)• $249.5K

Overview

Posted
September 24, 2025
Notice type
Award Notice
Set-aside
No Set aside used
Agency
Department of WarDEFENSE LOGISTICS AGENCY

Notice details

Office
DLA MARITIME.DLA MARITIME SHIPYARDS.DLA MARITIME - PUGET SOUND
Place of performance
Bremerton, Washington, 98314
Last updated
Nov 7, 2026
First published
Last updated on SAM.gov
Award date
Sep 19, 2025
Award amount (SAM.gov award notice)
$249.5K

Identifiers

Solicitation number
SPMYM225Q2494
Notice ID
f263aa48c06a42e69b6957f263ec7a2d
Award number (PIID)
SPMYM225P2537

Description

THIS SOLICITATION AND ANY SUBSEQUENT AMENDMENTS WILL BE POSTED TO THE SAM WEBSITE: SAM.GOV ELECTRONIC SUBMISSION OF QUOTES IS AVAILABLE THROUGH THE SAM WEBSITE. If choosing to quote, please complete and return the solicitation packet to me by the closing date to be considered. IN ORDER TO BE DEEMED RESPONSIVE, THE SOLICITATION MUST BE COMPLETED IN ITS ENTIRETY, AND MUST INCLUDE THE FOLLOWING: 1. Fill out box 17A, then Read box 28 and sign page 1 boxes 30 a, b, and c. 2. Provide your cage code. 3. Please quote FOB Destination Bremerton, WA. 4. Annotate the lead time. 5. Annotate the name of the manufacturer, and the products country of manufacturing. 6. Return this information with your quote. In order to be considered for award, if the contractor (awardee) is required to implement NIST SP 800-171, the contractor (awardee) shall have a current assessment as detailed in DFARS 252.204-7019 (I.E., not more than 3 years old unless a lesser time is specified in the solicitation) **Items deemed to be Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 requirement. Must identify and provide information to contracting officer on bid during solicitation period** FOR YOUR BID TO BE DEEMED RESPONSIVE, A SIGNED AND COMPLETED SOLICITATION MUST BE SUBMITTED VIA EMAIL OR FAX. ENSURE YOU CHECK APPLICABLE BOXES IN CLAUSE 52.204-24 (2)(d) (1) and (2). EMAIL: jack.edwards@dla.mil FAX: 360-476-4121

Full description on SAM.gov

Award Overview

Award Number

SPMYM225P2537

Award Amount (SAM.gov award notice)

$249.5K

Award Date

Sep 19, 2025

Awardee

Awardee UEI

VJKYDPE4L2V5

Awardee CAGE Code

0A316

Awardee Address

Santa Fe Springs, CA 90670, UNITED STATES

Original Solicitation

Notice ID: f263aa48c06a42e69b6957f263ec7a2d

Posted Date: Sep 24, 2025

Original Response Deadline: Not specified

More From This Vendor

Top 5 most recent

4
  • SPMYM226P7723
    ELLISON TECHNOLOGIES INC
    Department of DefenseNAICS 333517
    $350.0KSigned Jul 22, 2026
  • FA857125P0047
    ELLISON TECHNOLOGIES INC
    Department of DefenseNAICS 333517
    $433.1KSigned Jun 11, 2025
  • FA857125P0047
    ELLISON TECHNOLOGIES INC
    Department of DefenseNAICS 333517
    $382.9KSigned Feb 7, 2025
  • W519TC25P2076
    ELLISON TECHNOLOGIES INC
    Department of DefenseNAICS 333517
    $51.8KSigned Nov 26, 2024

Contacts

Contracting Officer

Primary Contact

JACK EDWARDS
Fax: 3604764121

Documents

Files (5)

  • SOW -REVISED.pdf

    156 KBAdded in Solicitation version 5Posted
    Download
  • AMENDED SOLICITATION SPMYM225Q2494.pdf

    379 KBAdded in Solicitation version 2Posted
    Download
  • SOLICITATION SPMYM225Q2494.pdf

    1.1 MBAdded in Solicitation version 1Posted
    Download
  • 51492005 SS _Redacted.pdf

    107 KBAdded in Award Notice version 5Posted
    Download
  • 51492005 SOW UU.pdf

    302 KBAdded in Solicitation version 1Posted
    Download

Lifecycle

  1. 4
    Version 4SolicitationArchived

    DNM6700-4G / 15K / 30 ATC MACHINE

    Notice 6aa6640e318d48ef958aae623f6819fc on SAM.gov

  2. 2
    Version 2Award NoticeArchived

    Type changed from Solicitation to Award Notice

    DNM6700-4G / 15K / 30 ATC MACHINE

    Notice 1618ff99306f4830b1db9c8308bb7c65 on SAM.gov

  3. 5
    Version 5Award NoticeArchivedCurrent

    DNM6700-4G / 15K / 30 ATC MACHINE

    Notice f263aa48c06a42e69b6957f263ec7a2d on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Radial Drilling Machine
55%
Combined Synopsis04/06/2026
DLA Weapons Support (Richmond) intends to issue a Unrestricted solicitation to procure 1 each CNC Horizontal Boring and Milling Machine with contract completion required in 350 days ARO. Complete technical data package DLA-WS (Richmond) VIBB 26-40-1005 including all design, lubrication, supplies, and labor requirement will be included as a part of the solicitation. Request for Quote SPE4A8-27-Q-0019 is anticipated to be issued on December 5, 2026 and close on January 5, 2027. FOB will be at Destination/Inspection at Origin/Acceptance at Destination. The solicitation will be unrestricted with Full and Open Competition. A site visit is required. Award will be result in a Firm, Fixed Price Contract. Please email the solicitation package along with the compliance statement and descriptive literature. Email address will be listed in the solicitation. This solicitation and award will be made under FAR 13.5 procedures. A copy of the solicitation will be available via the DLA DIBBS website at https://www.dibbs.bsm.dla.mil/Solicitations/ Solicitations are in Portable Document Format (PDF). To download and view these documents, use the latest version of Adobe Acrobat Reader. This software is available free at http://www.adobe.com. A paper or e-mail copy of the solicitation may be provided to requestors on a case by case basis if access to DIBBS is not available.”
55%
Pre-Solicitation01/04/2027
DLA Weapons Support (Richmond) intends to issue an Unrestricted solicitation to procure 1 each Coordinate Measuring Machine (CMM) with contract completion required in 175 days ARO. Complete technical data package DLA-WS (Richmond) VIBB 27-40-1000 including all design, lubrication, supplies, and labor requirement will be included as a part of the solicitation. Request for Quote (RFQ) SPE4A8-27-Q-0006 is anticipated to be issued on November 19, 2026, and close on December 21, 2026. FOB will be at Destination/Inspection/Acceptance at Destination. The solicitation will be unrestricted with Full and Open Competition. A site visit is required. Award will be result in a Firm, Fixed Price Contract. Please mail the solicitation package along with the compliance statement and descriptive literature. Mail to address listed in block 9 of the first page of the solicitation. No emails please. This solicitation and award will be made under FAR 12.201-1 Simplified Procedures. A copy of the solicitation will be available via the DLA DIBBS website at https://www.dibbs.bsm.dla.mil/Solicitations/ Solicitations are in Portable Document Format (PDF). To download and view these documents, use the latest version of Adobe Acrobat Reader. This software is available free at http://www.adobe.com. A paper or e-mail copy of the solicitation may be provided to requestors on a case by case basis if access to DIBBS is not available.”
55%
Pre-Solicitation12/21/2026
The Arnold Engineering Development Complex (AEDC) at Arnold AFB in Tennessee (TN) is seeking sources interested and capable of meeting the Government’s requirement for two (2) new small CNC Vertical Milling Machines, as described in the Introduction paragraph below. CONTRACTING OFFICE ADDRESS: AFTC/PZIA (Arnold) Attn: Leslie R. McGowan 100 Kindel Drive Suite A332 Arnold AFB, TN 37389-1332 DISCLAIMER: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR QUOTATION / PROPOSAL (RFQ / RFP). THIS SOURCES SOUGHT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. INTRODUCTION: This is a Sources Sought Notice to determine the availability and technical capability of small and large businesses to meet the Government’s requirement for two (2) new small CNC Vertical Milling Machines. Refurbished or remanufactured parts are not authorized for this requirement. The technical specifications balance are provided in Attachment 1 – Technical Specifications-Small CNC Vertical Mill. The vendor shall provide all materials, labor, and equipment necessary. Delivery is required to Arnold AFB located in TN. The result of this market research will contribute to determining the method of procurement if a requirement materializes. Based on the responses to this Sources Sought Notice/Market Research efforts, the requirement may result in a sole source acquisition, it may be set-aside for small businesses (in full or in art), or may be procured through full and open competition. Provided below are the anticipated Contract Line Item Numbers (CLINs), Item Descriptions, Unit of Measure (UoM), and Estimated Quantities: CLIN ITEM DESCRIPTION UNIT QTY 0001 Small CNC Vertical Mill EA 2 NORTH AMERICAN INDSUTRY CLASSIFICATION SYSTEM (NAICS) CODE: The anticipated North American Industry Classification System Code (NAICS) for this requirement is 333517 Machine Tool Manufacturing. The anticipated Product Service Code (PSC) or this requirement is 3417, Milling Machines. Submission Details: Responses should include: Company Information: Name, address, telephone number point of contact names, an e-mail address. Business size. State whether your firm is a large business, small business, small disadvantaged business (SDB), 8(a)-certified small business, historically underutilized business zone (HUBZone) small business, veteran-owned small business (VOSB), service-disabled veteran owned small business (SDVOSB), or woman-owned small business (WOSB) based upon NAICS code 333517. Commercial and Government Entity (CAGE) Code. SAM.gov Unique Entity ID (UEI). Provide any feedback regarding Attachment 1 – Technical Specifications-Small CNC Vertical Mill. Contract vehicles that would be available to the Government for the procurement of the product, to include ENCORE II, General Service Administration (GSA), GSA MOBIS, NIH, NASA SEWP, Federal Supply Schedules (FSS), or any other Government Agency contract vehicle. (This information is for market research only and does not preclude your company from responding to this notice.) Interested businesses should submit brief capabilities as it relates to supporting the above requirement. To assist with budgetary estimates, please provide a total estimated price to meet this contemplated acquisition. The vendor’s response to this Sources Sought shall be electronically submitted to the Contract Specialist, Leslie R. McGowan, via email, and the Contracting Officer, Ms. Erica A. Anglin: Emails: leslie.mcgowan@us.af.mil and erica.anglin@us.af.mil. Email Subject Line Reference: Sources Sought – Small CNC Vertical Mill Small CNC Vertical Mill Response Date: 6 November 2026, 10:00 AM CST DO NOT SUBMIT CLASSIFIED MATERIAL. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from release outside the Government and technical team. Attachment(s): Attachment 1 – Technical Specifications- Small CNC Vertical Mill
52%
Market Research11/06/2027
River Project Office Horizontal Boring and Milling Machine
52%
AwardedOpen

Additional Details

Solicitation Number

SPMYM225Q2494

Archive Date

Oct 4, 2025

Office Address

BREMERTON, WA, 98314-5000