GovChime
Notice ID: a8509a4fb53744a9944b6742c1bcb77aCombined Synopsis/SolicitationCancelled on SAM.gov

GRIT, ABRASIVE, ALUM OXIDE

Cancelled on SAM.gov (notice posted January 7, 2026). Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM HST
Posted
January 7, 2026
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
327910: Abrasive Product Manufacturing
Agency
Department of WarDEFENSE LOGISTICS AGENCY

Notice details

Office
DLA MARITIME.DLA MARITIME SHIPYARDS.DLA MARITIME - PEARL HARBOR
Place of performance
JBPHH, Hawaii, 96860
Last updated
Nov 5, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
SPMYM4-26-Q-3124
Notice ID
a8509a4fb53744a9944b6742c1bcb77a

Description

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, using Simplified Acquisition Procedures found at (FAR 13), as supplemented with the additional information included in this notice.  This announcement constitutes the only solicitation; a written solicitation will not be issued.  PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov. The RFQ number is (SPMYM426Q3124 

). This solicitation documents and incorporates provisions and clauses in effect through FAC 2025-06 October 1, 2025, and DFARS Change Notice 20251110. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions.  The clauses may be accessed in full text at these address(s):
https://www.ecfr.gov
https://www.acquisition.gov/content/list-sections-affected
http://www.acq.osd.mil/dpap/dars/change_notices.html

The FSC Code is (5350) and the NAICS code is (327910). The Small Business Standard is 900 employees. This requirement is 100% Small Business Set-Aside.

Evaluation criteria is Lowest Price Technically Acceptable (LPTA). PPIRS will be used to determine vendor responsibility.  Potential contractors will be screened for responsibility in accordance with FAR 9.104. 

This requirement is brand name mandatory to Washington Mills Tonawanda due to safety environmental health approval for this item to be used at the shipyard per local and NAVSEA instructions.  Quotations received that represent a different manufacturer will not be considered for award.

Offerors are required to submit descriptive literature to show how their quotation meets the required specifications.  A technical spec sheet and proof of traceability are required to be sent with quote. Failure to provide this information may result in your quotation being determined technically unacceptable. Only one quote per vendor may be sent.

DLA Weapons Support, Pearl Harbor requests responses from qualified sources capable of providing: Interested parties must fill out the required request for quote saved in the attachment section. It is titled, “SPMYM426Q3124”.

ITEM DESCRIPTION                                    QTY        U/I      

0001    GRIT, ABRASIVE BLAST               100         BG

ALUMINUM OXIDE, COARSE SPEICAL #24 GRIT SIZE, CID A-A-59316 TYPE-1, VIRGIN MATERIAL ONLY, 1-TON/2000# BAG(BG), WASHINGTON MILLS BLASTITE

*HMAUL SDS & COC REQUIRED*

CID/SPECIFICATION ORDERING DATA:

(A)ABRASIVE MATERIALS; FOR BLASTING, CID A-A-59316 DTD 3FEB99 WITH VALID

NOTICE-3 DTD 21NOV21

(B)TYPE-1 ALOX, GRADE-SPECIAL COURSE 24 GRIT SIZE

(C/D)QTY/PRESERVATION/PKG/MARKING AS SPECIFIED IN THE DESCRIPTION & THE BELOW  DETAILED INSTRUCTIONS

**ADDITIONAL REQUIREMENT: CERTIFICATE OF CONFORMANCE (COC) TO BE PROVIDED WITH SHIPMENT**

ALUMINUM OXIDE, SIZE #24 (NO SUBSTITUTION ALLOWED)

UNIT OF ISSUE = 1 TON BAG (2000 LBS.)

EACH SACK SHALL BE MARKING WITH THE FOLLOWING INFO:

1)           STOCK NUMBER: 5350-HM-CN0-9875

2)           BATCH OR LOT NUMBER (BATCH/LOT NUMBER(S) ON COC MUST MATCH THOSE ON THE BAGS)

PREPARATION FOR DELIVERY.

ABRASIVE BLASTING MEDIA SHALL BE SHIPPED IN BULK COMMODITY SHIPPING BAGS  WITH A 5:1 SAFETY FACTOR RATING, CONSTRUCTED OF WOVEN POLYPROPYLENE; DENIER NOT LESS THAN 1400 IN WARP & 1200 IN WEFT; COUNT NOT LESS THAN 16X14 YARDS PER INCH; WITH DOUBLE STRENGTH SIDEWALLS; SINGLE POLY TOP AND BOTTOM.  FABRIC IS TO BE TREATED FOR ULTRAVIOLET LIGHT PROTECTION TO RETAIN 75% STRENGTH AFTER 1200 HOURS IN A WEATHEROMETER.  MATERIAL MUST HAVE A BURST TEST OF NOT LESS THAN 450 LBS PER INCH.  BAG WILL BE EQUIPPED WITH A SLING WITH 4 OR MORE PICKUP POINTS AND 4 OR MORE LIFT STRAPS THAT CRADLE THE BOTTOM OF THE BAG TO PROVIDE A METHOD OF HANDLING. REINFORCED STRAP 1-1/2” OR WIDER IS TO BE SEWN AROUND THE TOP PERIMETER OF BAG AND IS INCLUDED AS AN INTEGRAL PART OF THE SLING.  SLING WILL BE CONSTRUCTED OF 2” OR WIDER POLYESTER WEBBING WITH BREAK STRENGTH OF NOT LESS THAN 2000 LBS.  TOP CLOSURE SHALL CONSIST OF A NYLON TENSION FASTENER OR PLASTIC COATED WIRETIE.  BOTTOM DISCHARGE SHALL CONSIST OF A 10”DIAMETER X 20”LONG CONCENTRIC SPOUT CLOSED WITH NYLON TENSION FASTENER OR PLASTIC COATED WIRE TIE.  A 3.5MIL POLYESTER LINER/MOISTURE BARRIER SHALL BE INSERTED & TIED OFF THROUGH BOTTOM OF DISCHARGE SPOUT.  TUCKED/FOLDED DISCHARGE SPOUT SHALL BE COVERED BY A WOVEN POLYPROPYLENE FLAP BARRICADE SECURED WITH A 1/8” BRAIDED POLYPROPYLENE DRAW STRING.  NET WEIGHT OF LOAD MUST NOT EXCEED 2000 LBS.  BAGS SHALL BE PALLETIZED IAW MIL-STD-147 (LATEST REVISION), WITHOUT STRAPPING.  FIBERBOARD OR PLYWOOD SHALL BE PLACED BETWEEN THE BAG & PALLET TO PREVENT FABRIC FROM SAGGING & PUNCTURE BY THE FORKLIFT.

NOTE: OFFEROR MUST COMPLETE THE ATTACHED PROVISIONS 52.204-24, 52.204-26, 252.204-7016, AND 252.204-7019 AND INCLUDE THE COMPLETED PROVISIONS WITH

THEIR QUOTE.

FAR CLAUSES AND PROVISIONS

52.204-7, System for Award Maintenance

52.204-9, Personal Identity Verification of Contractor Personnel

52.204-13, SAM Maintenance

52.204-19, Incorporation by Reference of Representations and Certifications

52.204-24* See Attachment for this provision

52.204-26* See Attachment for this provision

52.204-29 FASCSA Representation* See Attachment for this provision

52.211-14, Notice of Priority Rating

52.211-15, Defense Priority And Allocation Requirements

52.211-16, Variation in Quantity

52.211-17, Delivery of Excess Quantities

52.212-1, Instructions to Offerors - Commercial Products and Commercial Services

52.212-2 Evaluation—Commercial Products and Commercial Services* see addendum

52.212-3, Offeror Reps and Certs - Commercial Products and Commercial Services

52.212-4, Contract Terms and Conditions – Commercial Items

52.219-1 Alt 1 Small Business Program Representations

52.223-22, Sustainable Products and Services (DEVIATION 2025-O0004) in lieu of clause at FAR 52.223-23.

52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relation to Iran-Reps and Certs

52.232-18 Availability of Funds *See Attachment for Full Text

52.232-39, Unenforceability of Unauthorized Obligations

52.233-2 Service of Protest

52.242-13 Bankruptcy

52.242-15 Stop Work Order

52.243-1, Changes Fixed Price

52.246-1, Contractor Inspection Requirements

52.247-34, F.O.B-Destination

52.252-1 Solicitation Provisions Incorporated by Reference

52.252-2 Clauses Incorporated by Reference

52.253-1, Computer Generated Forms

52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services. (DEVIATION 2025-O0003 and 2025-O0004) including all base terms, conditions, and clauses outlined within the clause, plus the following clauses that have been specifically selected (checked off within the clause) for this procurement:

52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements

52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities

52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

52.209-10, Prohibition on Contracting with Inverted Domestic Corporations

52.232-40 Providing Accelerated Payments to Small Business Subcontractors

52.233-3, Protest After Award

52.233-4, Applicable Law for Breach of Contract Claim

52.204-10 Reporting Executive Compensation

52.204-27 Prohibition on a ByteDance Covered Application

52.204-30 FASCSA Federal Acquisition Supply Chain Security Act Orders-Prohibition

52.219-6 Notice of Total Small Business Set-Aside

52.219-28 Post-Award Small Business Program Representation

52.222-3 Convict Labor

52.222-19 Child Labor

52.222-50 Combating Trafficking in Persons

52.223-11 Ozone Depleting Substances

52.225-1 Buy American-Supplies

52.225-13 Restriction on Certain Foreign Purchases

52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving

52.232-33 Payment by EFT-SAM

52.232-36 Payment by Third Party

52.247-64 Preference for Privately Owned US-Flag Commercial Vessels

DFARS CLAUSES AND PROVISIONS

252.203-7000 Requirements Relating to Compensation of Former DoD Officials,

252.203-7002, Requirement to Inform Employees of Whistleblower Rights

252.203-7005 Representation Relating to Compensation of Former DoD Officials

252.204-7003. Control of Government Personnel Work Product

252.204-7004 Antiterrorism Awareness Training for Contractors.

252.204-7008 Compliance With Safeguarding Covered Defense Information Controls

252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information

252.204-7015, Disclosure of Information to Litigation Support Contractors

252.204-7016, * See Attachment for this provision.

252-204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation

252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

252.204-7024 Notice on the Use of the Supplier Performance Risk System

252.209-7999, Representation by Corporations regarding an Unpaid Delinquent Tax Liability

252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations.

252.223-7001, Hazard Warning Labels

252.223-7006, Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.

252.223-7008  Prohibition of Hexavalent Chromium

252.223-7006, Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.

252.223-7008  Prohibition of Hexavalent Chromium

252.225-7001 Buy American and Balance of Payments Program

252.225-7002 Qualifying Country Sources as Subcontractors

252.225-7013 Duty-Free Entry (NOV 2023)

252.225-7048, Export Controlled Items

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region - Representation

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region

252.231-7000, Supplemental Cost Principles.

252.232-7003, Electronic Submission of Payment Requests

252.232-7006, Wide Area Workflow Payment Instructions *See Attachment for Full Text

252.232-7010, Levies on Contract Payments

252.232-7998 Obligations in Advance of Fiscal Year 2026 Funding (DEVIATION 2026-O0001) *See Attachment for Full Text

252.243-7001, Pricing of Contract Modifications

252.243-7002, Requests for Equitable Adjustment

252.244-7000, Subcontracts for Commercial Items

252.246-7008, Sources of Electronic Parts

252.247-7023, Transportation of Supplies By Sea

Note: Vendor shall list the country of origin for each line item.

DLAD CLAUSES AND PROVISIONS (See Attachment for Full Text)

5452.233-9001, Disputes:  Agreement to Use Alternative Disputes Resolution

DLA PROCUREMENT NOTES (See Attachment for Full Text)

C01 Superseded Part Numbered Items (SEP 2016)

C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016)

C03 Contractor Retention of Supply Chain Traceability Documentation (MAR 2023)

C04 Unused Former Government Surplus Property (DEC 2016)

C14 Repackaging or Relabeling to Correct Deficiencies (AUG 2017)

C20 Vendor Shipment Module (VSM) (AUG 2017)

E05 Product Verification Testing (JUN 2018)

H02 Component Qualified Products List (QPL)/Qualified Manufacturers List (QML) (SEP 2016)

L06 Agency Protests (DEC 2016)

L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations

L31 Additive Manufacturing (JUN 2018)

M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016)

LOCAL CLAUSES (See Attachment for Full Text):

YM4 E7F754 CERTIFICATIONS REQUIRED WITH DELIVERY OF MATERIAL

YM4 C7F765 TRACEABLE OBJECTIVE QUALITY EVIDENCE (OQE)

YM4 C7F758 MERCURY EXCLUSION CLAUSE FOR MERCURY FREE PROCUREMENT

YM4 C7F762 HAZARDOUS MATERIAL

YM4 L001 EUROPEAN UNION RESTRICTIONS REGARDING NONMANUFACTURED WOOD PACKAGING AND PALLETS

YM4 L003 UNIT PRICES

YM4 L331 REVIEW OF AGENCY PROTESTS

Quoters are reminded to include a completed copy of 52.212-3 and ALT I if not updated in SAM.gov.

This announcement will close (01/07/2026 12:00 PM HST).  The Point of Contact for this solicitation is Leo Li who can be reached at leo.y.li.civ@us.navy.mil All responsible sources may submit a quote which shall be considered by the agency.  

System for Award Management (SAM).  Quoters must be registered in the SAM database to be considered for award.  Registration is free and can be completed online at http://www.sam.gov/.

If not the actual manufacturer – Manufacturer’s Name, Location, and Business Size must be provided.

Please submit quotations via email at leo.y.li.civ@us.navy.mil

All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC)* or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, PayPal, etc.) Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.

*If selecting GCPC as the preferred method of payment, please be advised that per DFARS 232.7002, a receiving report MUST be entered into WAWF.

******* END OF COMBINED SYNOPSIS/SOLICITATION *******

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Documents

Files (4)

  • Clauses Full Text Provisions and Clause.docx

    60 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download
  • SPMYM426Q3124.pdf

    1.0 MBAdded in Combined Synopsis/Solicitation version 1Posted
    Download
  • BRAND NAME.pdf

    490 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download
  • COMBINED SYNOPSIS SPMYM4-26-Q-3124.pdf

    78 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Combined Synopsis/SolicitationArchived

    GRIT, ABRASIVE, ALUM OXIDE

    Notice bed0acc5bf4c4c51b9aca6a20eadbd8f on SAM.gov

  2. 2
    Version 2Combined Synopsis/SolicitationCancelledArchivedCurrent

    GRIT, ABRASIVE, ALUM OXIDE

    Notice a8509a4fb53744a9944b6742c1bcb77a on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov. The RFQ number is SPMYM327Q1101. This solicitation documents and incorporates provisions and clauses in effect through FAC 2026-01 and DFARS Change Notice 20260702. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at this address: https://www.ecfr.gov, https://www.acquisition.gov/content/list-sections-affected, and http://www.acq.osd.mil/dpap/dars/change_notices.html The FSC Code is 5350 and the NAICS code is 327910. The Small Business Standard is 900. This requirement is being processed utilizing 100% Small Business Set Aside. Evaluation criteria is Lowest Price Technically Acceptable (LPTA). SPRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104. Offerors are required to submit descriptive literature to show how their quotation meets the required specifications. Failure to provide this information may result in your quotation being determined technically unacceptable. The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing: SEE ATTACHED RFQ. NOTE: OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 252.204-7016 AND INCLUDE THE COMPLETED PROVISIONS WITH THEIR OFFER. FAR CLAUSES AND PROVISIONS Clause/Provision Title 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements 52.204-7 System for Award Management 52.204-13 System for Award Management Maintenance 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law 52.211-14 Notice of Priority Rating for National Defense, Emergency Preparedness, and Energy Program Use. 52.211-15 Defense Priority and Allocation Requirements 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services 52.212-4 Contract Terms and Conditions—Commercial Products and Commercial Services 52.219-6 Notice of Total Small Business Set-Aside 52.219-28 Post-Award Small Business Program Representation 52.222-3 Convict Labor 52.222-19 Child Labor—Cooperation with Authorities and Remedies 52.222-36 Equal Opportunity for Workers with Disabilities 52.222-50 Combating Trafficking in Persons 52.222-90 Addressing DEI Discrimination by Federal Contractors 52.223-3 Hazardous Material Identification & Material Safety Data 52.223-11 Ozone-Depleting Substances 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving 52.232-33 Payment by Electronic Funds Transfer—System for Award Management 52.232-39 Unenforceability of Unauthorized Obligations 52.232-40 Providing Accelerated Payments to Small Business Subcontractors 52.233-3 Protest after Award 52.233-4 Applicable Law for Breach of Contract Claim 52.240-90 Security Prohibitions and Exclusions Representations and Certifications **See attached clauses and provisions for full text** 52.240-91 Security Prohibitions and Exclusions **See attached clauses and provisions for full text** 52.240-91 Alt 1 Security Prohibitions and Exclusions (Alt I) 52.240-93 Basic Safeguarding of Covered Contractor Information Systems **See attached clauses and provisions for full text** 52.242-15 Stop-Work Order 52.243-1 Changes—Fixed Price 52.246-1 Contractor Inspection Requirements 52.247-34 F.o.b. Destination 52.252-1 Solicitation Provisions Incorporated by Reference **See attached clauses and provisions for full text** 52.252-2 Clauses Incorporated by Reference **See attached clauses and provisions for full text** 52.252-5 Authorized Deviations in Provisions **See attached clauses and provisions for full text** 52.252-6 Authorized Deviations in Clauses **See attached clauses and provisions for full text** 52.253-1 Computer Generated Forms DFARS CLAUSES AND PROVISIONS Clause/Provision Title 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 252.203-7002 Requirement to Inform Employees of Whistleblower Rights 252.203-7005 Representation Relating to Compensation of Former DoD Officials 252.204-7003 Control of Government Personnel Work Product 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support 252.204-7016 Covered Defense Telecommunications Equipment or Services--Representation 252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services--Representation 252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services 252.204-7022 Expediting Contract Closeout 252.204-7024 Notice on the use of the Supplier Performance Risk System 252.215-7013 Supplies and Services Provided by Nontraditional Defense Contractors 252.223-7001 Hazard Warning Labels 252.223-7008 Prohibition of Hexavalent Chromium 252.225-7000 Buy American--Balance of Payments Program Certificate—Basic 252.225-7001 Buy American and Balance of Payments Program—Basic 252.225-7002 Qualifying Country Sources as Subcontractors 252.225-7012 Preference for Certain Domestic Commodities 252.225-7020 Trade Agreements Certificate—Basic 252.225-7048 Export-Controlled Items 252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region–Representation 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region 252.231-7000 Supplemental Cost Principles 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports 252.232-7006 Wide Area WorkFlow Payment Instructions **See attached clauses and provisions for full text** 252.232-7010 Levies on Contract Payments 252.243-7001 Pricing of Contract Modifications 252.244-7000 Subcontracts for Commercial Products or Commercial Services 252.247-7023 Transportation of Supplies by Sea--Basic 5452.233-9001 Disputes: Agreement To Use Alternative Dispute Resolution (ADR) **See attached clauses and provisions for full text** DLA PROCUREMENT NOTES (See Attachment for Full Text) C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) C03 Contractor Retention of Supply Chain Traceability Documentation (JUN 2023) C04 Unused Former Government Surplus Property (SEP 2021) C14 Repackaging or Relabeling to Correct Deficiencies (MAY 2020) C20 Vendor Shipment Module (VSM) (MAY 2026) E05 Product Verification Testing (MAY 2020) H10 Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (MAY 2024) L06 Agency Protests (DEC 2016) L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations (JUN 2024) L09 Reverse Auction (OCT 2016) L10 Competing Individual Delivery Orders Through Reverse Auctions (OCT 2016) L31 Additive Manufacturing (JUN 2018) M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016) LOCAL CLAUSES (See Attachment for Full Text) YM3 A1: Additional Information YM3 A3: Government Purchase Card Method of Payment Additional Info (When GCPC Payment) YM3 C500: Mercury Control (Supplies) YM3 C528: Specification Changes YM3 D2.2: Marking of Shipments YM3 D4: Preparation for Delivery YM3 D8: Prohibited Packing Materials YM3 D10: Hazardous Material Marking YM3 E2: Inspection and Acceptance (Destination) YM3 E4: Disposition of Nonconforming Material YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard YM3 M8: Single Award for All Items (All or none procurements) This announcement will close 10 November 2026. The Point of Contact for this solicitation is Stephen Smith who can be reached at stephen.p.smith161.civ@us.navy.mil. All responsible sources may submit a quote which shall be considered by the agency. System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/. If not the actual manufacturer the manufacturer’s name, location, and business size must be provided. Please submit quotes via email to: stephen.p.smith161.civ@us.navy.mil, and PNSYSupplyQuotations@us.navy.mil All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC)* or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, Paypal, etc.) Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. *If selecting GCPC as the preferred method of payment, please be advised that per DFARS 232.7002, a receiving report MUST be entered into WAWF.
77%
Combined Synopsis11/10/2026
NEW REQUIREMENT ABRASIVE BLAST MEDIA
68%
Solicitation11/18/2026
This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in FAR Subpart 12.6, as a supplemented with additional information included in the notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will NOT be issued. This is Request for Quote (RFQ) using FAR Part 12, Acquisition of Commercial Items; the Solicitation Number is W519TC-27-Q-GRIT. The solicitation and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01. The North America Industry Classification System (NAICS) Code 327910 Abrasive Product Manufacturing; the small business size standard is 900 employees. This Product Service Code is 5350 Abrasive Materials. Offerors must be registered within the System for Award Management (SAM) databased at time of response to this solicitation. The website for SAM is https://www.sam.gov/. Addendum to 52.212-1 Description of Requirement Item: Steel Grit Size 40 Quantity: 120,000 lbs. The requirement is for the procurement of premium high-carbon cast steel blasting grit conforming to rigid engineering, physical, and metallurgical baselines. Material Specification: High-Carbon Cast Steel Grit conforming to SAE J1993 HCS G40H. Sizing Profile: G40 Sizing (per SAE J444). Hardness Standard: 60 HRC Minimum (Tempered Martensite Microstructure) Particle Shape Standard: Angular, with no more than 5% round or half-round Physical Density: 7.8g/cm (guaranteed solid cast steel density free of gas pockets and casting voids) Delivery Schedule: Initial delivery November 2026 followed by two additional deliveries. Each delivery will deliver 40,000 lbs. of steel grit. For a final total of 120,0000 lbs. Delivery Address: Building 8 1 C. Tree Road McAlester OK, 74501 A CERTIFICATE OF ANALYSIS is required for every delivery and must include the following: STATEMENT THAT PRODUCT MEETS SAE SPECIFICATION J1993 MANUFACTURER NAME, PRODUCT NAME/DESCRIPTION, SPECIFICATION, LOT/BATCH NUMBER, MANUFACTURE/EXPIRATION DATE, ANALYTICAL DATA, STATEMENT OF NO CHANGE IN MATERIALS OR PROCESSES, AND SIGNATURE OF AUTHORIZED REPRESENTATIVE. PACKAGING AND PACKING Must be shipped in 50lb Bags PACKAGING LABELS WILL INCLUDE: MANUFACTURER NAME, PRODUCT NAME/DESCRIPTION, LOT/BATCH NUMBER AND MANUFACTURE/EXPIRATION DATE TYPE OF ACQUISTION AND CONTRACT This Request for Quote, and any ultimate Award is limited to Ervin Industries, Inc. in accordance with the Synopsis associated with this Solicitation. BASIS FOR AWARD The Government intends to make an award after determination that the price is reasonable, and the offeror is responsible. Price Analysis shall be used to determine price reasonableness; additional methods of price analysis may be used as determined by the contracting officer. These methods of evaluation may include information/input from sources such as (but not limited to) other Governmental agencies and personnel. The Government reserves the right to require the submission of any data (I.e. Data other Than Certified Cost or Pricing Data necessary to validate the reasonableness of an offer. QUOTE/PROPOSAL SUBMISSION REQUIREMENTS Offerors shall submit the following in response to this solicitation: Price – Offerors must submit Completed Pricing Sheet at Attachment 02. All yellow-highlighted sections shall be completed. Prices shall be stated in 2 decimal places. LISTING OF ATTACHMENTS Attachment 01- LSJ Redacted Attachment 02- Pricing Sheet Attachment 03- Provisions and Clauses Attachment 04- Purchase Description DEADLINE FOR SUBMISSION Offers are due on November 4, 2026 no later than 12:00pm Central Time. Offer shall be submitted in the following way: Electronically via email to the Contracting Officer, darla.a.lott.civ@army.mil and Contract Specialist, andrea.garcia63.civ@army.mil . Offerors shall include: “W519TC-26-Q-GRIT - Response – [Insert Offeror’s Name]” within the Subject line. QUESTIONS Questions shall be submitted in the same manner as Offer, electronically via email to the Contract Specialist and Contracting Officer. “W519TC-26-Q-GRIT - Questions– [Insert Contractor's Name]” within the Subject line. **Note: Interested offerors must submit any questions concerning this solicitation at the earliest time possible, to enable the Buyer to respond. Questions not received within a reasonable time prior to close of the solicitation may not be considered.
65%
Combined Synopsis11/04/2026
This is a COMBINED SYNOPSIS/SOLICITATION for commercial products or commercial services prepared in accordance with the information in FAR part 12, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. Paper copies of this solicitation will not be available. This combined synopsis/solicitation SHALL be posted to SAM.gov. Solicitation number SPMYM327Q3100 is issued as a Request for Quotation (RFQ). This solicitation documents and incorporates provisions and clauses in effect through FAC 2026-01 and DFARS Change Notice 2026-0702. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.ecfr.gov and https://www.acquisition.gov/content/list-sections-affected and http://www.acq.osd.mil/dpap/dars/change_notices.html. The FSC Code is 5350 and the NAICS code is 327992. The Small Business Standard is 600. This is a 100% Small Business Set Aside solicitation. Evaluation criteria is Lowest Price Technically Acceptable (LPTA). SPRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104. This requirement is restricted to QPL sources. Quotations received that represent a different manufacturer will not be considered for award. Offerors are required to submit descriptive literature to show how their quotation meets the required specifications. Failure to provide this information may result in your quotation being determined technically unacceptable. The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing: CLIN 0001: GRIT Super Sacks, iaw attached RFQ. CLIN 0002: DELIVERY of Grit, iaw attached RFQ. CLIN 0003: DATA, iaw attached RFQ. NOTE: OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 252.204-7016 AND INCLUDE THE COMPLETED PROVISIONS WITH THEIR OFFER. FAR CLAUSES AND PROVISIONS: Responsibility and Inspection: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. The following FAR provisions (P) and clauses (C) are applicable to this procurement: 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation. 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements 52.204-7 (P), System for Award Maintenance 52.204-10 Reporting Executive Compensation 52.204-13, SAM Maintenance 52.204-19, Incorporation by Reference of Representations and Certifications 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations-Representation. 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Lawa 52.211-14 (P), Notice of Priority Rating. Rated DO. 52.211-15, Defense Priority And Allocation Requirements 52.212-1 (P), Instructions to Offerors - Commercial Items; 52.212-2 Evaluation—Commercial Products and Commercial Services: Lowest Priced Technically Acceptable (LPTA). Period of Performance (POP) will be awarded as: not to exceed one year. Evaluation will also include a six-month extension of the contract end date under FAR 52.217-8. 52.212-4, Contract Terms and Conditions – Commercial Items 52.217-5 Evaluation of Options (P) 52.217-8 Options to Extend Services 52.219-1 (P), Small Business Program Representations 52.219-6 Notice of Total Small Business Set-Aside 52.219-28 Post-Award Small Business Program Representation 52.222-3 Convict Labor 52.222-19 Child Labor 52.222-36 Equal Opportunity for Workers with Disabilities 52.222-50 Combating Trafficking in Persons 52.222-90 Addressing DEI Discrimination by Federal Contractors 52.223-3, Hazardous Material Identification and Material Safety Data 52.223-11 Ozone Depleting Substances 52.223-23 Sustainable Products and Services 52.226-8 Encouraging Contractors to Ban Text Messaging While Driving 52.232-33 Payment by EFT-SAM 52.232-36 Payment by Third Party 52.232-39, Unenforceability of Unauthorized Obligations 52.232-40 Providing Accelerated Payments to Small Business Subcontractors 52.233-3, Protest After Award 52.233-4, Applicable Law for Breach of Contract Claim 52.240-90 (P) Security Prohibitions and Exclusions Representations and Certifications. (See Attachment) 52.240-91 Security Prohibitions and Exclusions. (See Attachment) 52.240-93 Basic Safeguarding of Covered Contractor Information Systems. (See Attachment) 52.242-15, Stop Work Order 52.242-17 Government Delay of Work 52.243-1, Changes Fixed Price 52.244-6 DEV Subcontracts for Commercial Products and Commercial Services 52.246-1, Contractor Inspection Requirements 52.247-34, F.O.B-Destination 52.252-1 (P), Solicitation Provisions Incorporated by Reference 52.252-2, Clauses Incorporated by Reference 52.252-5 Authorized Deviations in Provisions 52.252-6 Authorized Deviations in Clauses 52.253-1, Computer Generated Forms DFARS CLAUSES AND PROVISIONS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials, 252.203-7002, Requirement to Inform Employees of Whistleblower Rights 252.203-7005 (P), Representation Relating to Compensation of Former DoD Officials 252.204-7003. Control of Government Personnel Work Product 252.204-7009 Limitations on the Use or Disclosure of Third- Party Contractor Reported Cyber Incident Information 252.204-7015, Disclosure of Information to Litigation Support Contractors 252.204-7016 (P), * See Attachment for this provision. 252-204-7017 (P), Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services. 252.204-7022 Expediting Contract Closeout 252.204-7024 (P), Notice on the Use of the Supplier Performance Risk System 252.211-7003, Item Unique Identification and Valuation Para (c)(i): Exempted from IUID by Military Service Customer. Supplier should check IUID exemption box in WAWF. 252.215-7013 Supplies and Services Provided by Nontraditional Defense Contractors. 252.223-7001, Hazard Warning Labels 252.223-7008 Prohibition of Hexavalent Chromium 252.225-7000 Buy American--Balance of Payments Program Certificate—Basic 252.225-7001 Buy American and Balance of Payments Program 252.225-7002 Qualifying Country Sources as Subcontractors 252.225-7012 Preference for Certain Domestic Commodities. 252.225-7048, Export Controlled Items 252.225-7055 (P) Representation Regarding Business Operations with the Maduro Regime 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. 252.225-7059 (P), Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region - Representation 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region 252.231-7000, Supplemental Cost Principles. 252.232-7003, Electronic Submission of Payment Requests (for WAWF, DATA, CRCARD) 252.232-7006, Wide Area Workflow Payment Instructions (Mandatory SAT, DATA, CARD) 252.232-7010, Levies on Contract Payments 252.243-7001, Pricing of Contract Modifications 252.244-7000, Subcontracts for Commercial Items 252.247-7023, Transportation of Supplies By Sea Note: Vendor shall list the country of origin for each line item. DLAD CLAUSES AND PROVISIONS (See Attachment for Full Text) 5452.233-9001, Disputes: Agreement to Use Alternative Disputes Resolution DLA PROCUREMENT NOTES (See Attachment for Full Text) C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) C03 Contractor Retention of Supply Chain Traceability Documentation (JUN 2023) C04 Unused Former Government Surplus Property (SEP 2021) C14 Repackaging or Relabeling to Correct Deficiencies (MAY 2020) C20 Vendor Shipment Module (VSM) (MAY 2026) E05 Product Verification Testing (MAY 2026) H10 Exceptions to Requirement for All Sources of Supply to Have DLA Controlling Authority Approval to Access DLA Controlled Technical Data or Information for Contract Performance (MAY 2024). L06 Agency Protests (DEC 2016) L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations (JUN 2024) L31 Additive Manufacturing (JUN 2018) M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016) LOCAL CLAUSES (See Attachment for Full Text): YM3 A1: Additional Information YM3 A3: Government Purchase Card Method of Payment Additional Info YM3 C500: Mercury Control (Supplies) YM3 C501: Correction of Certifications YM3 C506: Qualified Products for Award (QPL Items: 22262) YM3 C528: Specification Changes YM3 D2: Marking of Shipments YM3 D4: Preparation for Delivery (Commercially Packaged Items) YM3 D8: Prohibited Packing Materials YM3 E2: Inspection and Acceptance (Destination) YM3 E4: Disposition of Nonconforming Material YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard YM3 M8: Single Award for All Items This announcement will close at 03:00 PM EST local time on 5 November 2026. POC for this solicitation is Emily Kritzman who can be reached by email (below). METHOD OF SUBMISSION: Offers shall be emailed. Please submit quotations via email at Emily.K.Kritzman.civ@us.navy.mil and PNSYsupplyquotations@us.navy.mil All responsible sources may submit a quote which shall be considered by the agency. System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/. If not the actual manufacturer – Manufacturer’s Name, Location, and Business Size must be provided; traceability documentation demonstrating communication with source and verification of part numbers and/or specifications must also be provided. All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC)* or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, Paypal, etc.). Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. *If selecting GCPC as the preferred method of payment, please be advised that per DFARS 232.7002, a receiving report MUST be entered into WAWF. ******* END OF COMBINED SYNOPSIS/SOLICITATION ********
60%
Combined Synopsis11/05/2026
Solicitation for stainless steel cut wire for shot blasting in accordance with the Society of Automotive (SAE) Standards. The requirement is for cut wire only. No rounded or conditioning allowed. The contractor will be responsible for shipping to Anniston Army Depot.
59%
AwardedOpen

Additional Details

Solicitation Number

SPMYM4-26-Q-3124

Archive Date

Jan 7, 2026

Office Address

PEARL HARBOR, HI, 96860-5033