GovChime
Notice ID: 75f60e749b6541f9b1d4ae2c0daff518Presolicitation

SPRRA127RA008/ MOTOR-PUMP, HYDRAU

Active, responses due . Full description on SAM.gov.

Overview

Response deadline
4:30 PM CST
Posted
November 5, 2026
Notice type
Presolicitation
Set-aside
No Set aside used
NAICS
336413: Other Aircraft Parts and Auxiliary Equipment Manufacturing
Agency
Department of WarDEFENSE LOGISTICS AGENCY

Notice details

Office
DLA AVIATION.DLA AVIATION HUNTSVILLE.DLA AVIATION AT HUNTSVILLE, AL
Place of performance
0, Oklahoma, 73145
Last updated
Nov 5, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
SPRRA127RA008
Notice ID
75f60e749b6541f9b1d4ae2c0daff518

Description

Class Code: 16
NAICS Code: 336413
Subject: MOTOR-PUMP,HYDRAU
Solicitation Number: SPRRA127RA008
Set Aside Code: N/A

Description:
No telephone requests will be accepted. Direct your requests and communication to: ATTN: DLA-AHAA, Jessica Coleman,
Contract Specialist, via e-mail: jessica.coleman@dla.mil. For request for solicitation, provide your name, the company name and
Cage Code and a telephone number.


PRON: W58H0Z0098743768. The Government proposes to acquire on a Firm Fixed Price contract a quantity of 140 each of a
MOTOR-PUMP,HYDRAULI; NSN: 1650-01-119-7429; Part Number: 145HS520-6 applicable to the CHINOOK.


Production Lead Time (PLT) without First Article Testing is 140 each, 540 Days After Contract Award (DACA) with deliveries to
TINKER AFB, OK, 73145-8000.


This item is restricted to the following:
THE BOEING COMPANY, CAGE CODE: 77272
BOEING DISTRIBUTION SERVICES, INC., CAGE CODE: 2V484
EATON AEROSPACE LLC, CAGE CODE: 62983
JAMAICA BEARINGS CO INC, CAGE CODE: 04836


The rights to use the data needed to purchase this part from additional source(s) are not owned by the Government and cannot
be purchased, developed, or otherwise obtained. It is uneconomical to reverse engineer this part.


All offerors must meet prequalification requirements in order to be eligible for award. Firms that recognize and can produce the
required item described above are encouraged to identify themselves. Firms are encouraged to seek source approval in order to
compete for future solicitations by visiting AvMC's public website:
https://amrdec.army.afpims.mil/Directorates/STI/


All responsible sources may submit an offer, which shall be considered by the Agency. The closing date annotated is an
estimated date and may be adjusted dependent upon the date of release for solicitation; however, the solicitation will not close
prior to the date stated above. Foreign Firms are reminded that all requests for solicitation must be processed through their
respective embassies.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

No documents available.

Lifecycle

  1. 3
    Version 3Sources SoughtArchived

    SPRRA127RA008/ MOTOR-PUMP, HYDRAU

    Notice 4e174ae4e9ae4f398a24def18c68c54c on SAM.gov

  2. 4
    Version 4PresolicitationCurrent

    Type changed from Sources Sought to Presolicitation

    SPRRA127RA008/ MOTOR-PUMP, HYDRAU

    Notice 75f60e749b6541f9b1d4ae2c0daff518 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Class Code: 16 NAICS Code: 336413 Subject: PUMP,AXIAL PISTONS Solicitation Number: SPRRA127RA007 Set Aside Code: N/A Description: No telephone requests will be accepted. Direct your requests and communication to: ATTN: DLA-AHBA, Jessica Coleman, Contract Specialist, via e-mail: jessica.coleman@dla.mil. For request for solicitation, provide your name, the company name and Cage Code and a telephone number. PRON: W58H0Z0098627643. The Government proposes to acquire on a Firm Fixed Price contract a quantity of 100 each of a PUMP,AXIAL PISTONS; NSN: 1650-01-516-6740; Part Number: 145HS100-5 applicable to the CHINOOK. Production Lead Time (PLT) without First Article Testing is 100 each, 1290 Days After Contract Award (DACA) with deliveries to TINKER AFB, OK, 73145-8000. This item is restricted to the following: THE BOEING COMPANY, CAGE CODE: 77272 BOEING DISTRIBUTION SERVICES, INC., CAGE CODE: 2V484 EATON AEROSPACE LLC, CAGE CODE: 62983 JAMAICA BEARINGS CO INC, CAGE CODE: 04836 The rights to use the data needed to purchase this part from additional source(s) are not owned by the Government and cannot be purchased, developed, or otherwise obtained. It is uneconomical to reverse engineer this part. All offerors must meet prequalification requirements in order to be eligible for award. Firms that recognize and can produce the required item described above are encouraged to identify themselves. Firms are encouraged to seek source approval in order to compete for future solicitations by visiting AvMC's public website: https://amrdec.army.afpims.mil/Directorates/STI/ All responsible sources may submit an offer, which shall be considered by the Agency. The closing date annotated is an estimated date and may be adjusted dependent upon the date of release for solicitation; however, the solicitation will not close prior to the date stated above. Foreign Firms are reminded that all requests for solicitation must be processed through their respective embassies.
-Pre-Solicitation11/20/2026
-Pre-Solicitation11/19/2026
Synopsis PR: FD2030-25-00800 1. Estimated issue date and estimated closing/response date: Issue: October 5, 2026 Closes: November 4, 2026 2. RFP# SPRTA1-27-R-0001 Request for Proposal 3. Service/Spare/Repair/OH: Spares 4. AMC: 1/C 5. Nomenclature/Noun: Cylinder, Assembly, A 6. NSN: 1650-00-741-3109 7. PN: 3-43260-505 8. History: No recent DLA procurement history 9. Description/Function: Cylinder, Assembly, A. DIMENSIONS, 27.0 INCH (L) BY 10.0 INCH (W) BY 9.3 INCH (H). 11.0 POUNDS (WEIGHT). MATERIAL CONTENT, Metal Alloy. Applies mechanical inputs to the rudder actuator to obtain flight control corrections. APPL. TO T-38. 10. Total Line Item Quantity: 0001AA Bid A (First Article Required) 2 each Cylinder, Assembly, A (FA) 0001AB Bid A (First Article Required) 1 lot FA Test Report 0001AC Bid A (First Article Required) 1 lot Certification of Material 0001AD Bid A (First Article Required) 1 lot Certificate of Compliance 0001AE Bid A (First Article Required) 6-38; 23 each Cylinder, Assembly, A (Production) 0002 Bid B (If First Article Waived) 6-38; 25 each Cylinder, Assembly, A (Production, No FA) 11. Application (Engine or Aircraft): T-38 12. Destination: SW3210, Hill AFB, UT 13. Required Delivery: On or Before 31 December 2027 14. Qualification Requirements: Contractor must be an approved source. 15. Export Control Requirements: Yes 16. UID: UID requirements will apply. 17. Qualified Sources: Northrop Grumman Systems Corporation (CAGE 76823) Thomas Instrument (CAGE 5H860) 18. Set-aside: This acquisition will not be set aside. 19. Surplus: Surplus is not authorized. 20. Mandatory Language: The Government does not own the data or the rights to the data needed to manufacture this item. Firms interested in participating in this procurement are encouraged to contact the OEM to inquire about the data or rights to the data. In accordance with FAR 5.207(c) (16) (i), all responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. Foreign owned firms are advised to contact the contracting officer or program manager before submitting a proposal to determine whether there are restrictions on receiving an award. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contract with the firms(s) listed. This acquisition involves technology that has a military or space application. The extent of foreign participation has not yet been determined. Nothing in this notice contradicts other restrictions, identified in the synopsis notice or solicitation, regarding eligible sources (e.g., if this is a small business set aside, foreign sources may not participate as potential prime contractors but could, if otherwise eligible, participate as subcontractors). Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer Electronic procedures will be used for this solicitation. Hardcopies of the solicitation will not be sent from this office. The solicitation will be available for download only at www.sam.gov. Authority: 10 U.S.C. 2304(c) (1), Justification: supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. This notice of intent is not a request for competition. However, all proposals received within 45 days (30 days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and past performance factors as detailed in the solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 385-591-1672. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Request for written quotation will be issued. Only written or faxed request received directly from the requestors are acceptable. The anticipated award date will be 90 days after the issuance of this notice. 21. Buyer name and email address: Questions concerning this synopsis or subsequent solicitation can be directed to the buyer Chrissy Turnage at christine.turnage@us.af.mil.
-Solicitation12/04/2026
NSN: 1650-00-130-9347HS PN: 696106 NOUN: CYLINDER BLOCK, HYDR QTY: Est: 130 EA (Min: 33 EA, Max: 195 EA) OEM: Hamilton Sundstrand (CAGE: 99167)
-Solicitation11/30/2026
Synopsis PR: FD2030-26-00083 1. Estimated issue date and estimated closing/response date: Issue: February 17, 2026 Closes: March 19, 2026 2. RFP# SPRTA1-26-R-0037 Request for Proposal 3. Service/Spare/Repair/OH: Spares 4. AMC: 1/C 5. Nomenclature/Noun: Servovalve, Hydraulic 6. NSN: 1650-00-609-8372 7. PN: 5-97213-2 8. History: 13 Mar 1996, 5 each 6 Feb 1996, 49 each, Downey Manufacturing Inc, (98315) 9. Description/Function: Servovalve, Hydraulic. DIMENSIONS, 11.0 INCH (L) BY 5.0 INCH (W) BY 5.0 INCH (H). Weight: 5.45 pounds (LBS). MATERIAL CONTENT, STEEL,ALUMINUM,TEFLON,AND SYNTHETIC RUBBER. DIRECT SHYDRAULIC PRESSURE NECESSARY TO LOWER OR RAISE FLAPS AND SPOILERS INSTALLED AS PART OF AIRPLANE WING ASSEMBLIES. AIRCRAFT: C/KC135 10. Total Line Item Quantity: 0001 0002 0003 0004 0005 0006 7-39; 26 each 2 each 1 each 1 lot 1 lot 1 lot Servovalve, Hydraulic Servovalve, Hydraulic (FA) Servovalve, Hydraulic (FA expended) FA Test Report Material of Certification Certificate of Compliance 11. Application (Engine or Aircraft): KC-135 12. Destination: 0001 0002 0003 0004 0005 0006 SW3210 FY2303 N/A FA8111 FA8111 FA8111 13. Required Delivery: 0001 0002 0003 0004 0005 0006 7-39; 26 each 2 each 1 each 1 lot 1 lot 1 lot On or Before 01 AUG 2027 On or Before 01 FEB 2027 IAW DD Form 1423-1 (CDRL) and Form 260 IAW DD Form 1423-1 (CDRL) and Form 260 IAW DD Form 1423-1 (CDRL) and Form 260 IAW DD Form 1423-1 (CDRL) and Form 260 14. Qualification Requirements: Qualification requirements are set forth in JACG Aviation SAM Handbook*. Due to the complexity and criticality of this part, only actual manufacturers that have successfully completed all testing required by the original company responsible for the design, or manufacturers that have successfully completed all testing on items determined by the government to be similar in complexity and criticality, can be considered approved sources for this item. 15. Export Control Requirements: Contractors are REQUIRED to be “EXPORT CONROLLED” certified in order to receive and view drawings for this solicitation. The website for registration is https://www.dla.mil/Logistics-Operations/Services/JCP/ Engineering instructions and Engineering Data List will be available to certified contractors via www.sam.gov (Notice: FD2030-26-00083 / Special Notice / Posting Date: 22 AUG 2025) 16. UID: UID requirements will apply. 17. Qualified Sources: Sargent Controls (0FEV5) Keeley Aerospace, Ltd (3DLX9) Circor Aerospace, Inc. (50601) Parker-Hannifin Corporation (59211) Woodward HRT, Inc. (60029) Triumph Actuation Systems (61898) The Boeing Company (81205) 18. Set-aside: This acquisition will not be set aside. 19. Surplus: Surplus is not authorized. 20. Mandatory Language: The Government does not own the data or the rights to the data needed to manufacture this item. Firms interested in participating in this procurement are encouraged to contact the OEM to inquire about the data or rights to the data. In accordance with FAR 5.207(c) (16) (i), all responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. Foreign owned firms are advised to contact the contracting officer or program manager before submitting a proposal to determine whether there are restrictions on receiving an award. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contract with the firms(s) listed. This acquisition involves technology that has a military or space application. The extent of foreign participation has not yet been determined. Nothing in this notice contradicts other restrictions, identified in the synopsis notice or solicitation, regarding eligible sources (e.g., if this is a small business set aside, foreign sources may not participate as potential prime contractors but could, if otherwise eligible, participate as subcontractors). Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer Electronic procedures will be used for this solicitation. Hardcopies of the solicitation will not be sent from this office. The solicitation will be available for download only at www.sam.gov. Authority: 10 U.S.C. 2304(c) (1), Justification: supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. This notice of intent is not a request for competition. However, all proposals received within 45 days (30 days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and past performance factors as detailed in the solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 385-591-1672. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Request for written quotation will be issued. Only written or faxed request received directly from the requestors are acceptable. The anticipated award date will be 90 days after the issuance of this notice. 21. Buyer name and email address: Questions concerning this synopsis or subsequent solicitation can be directed to the buyer Chrissy Turnage at christine.turnage@us.af.mil.
-Solicitation11/30/2026

Additional Details

Solicitation Number

SPRRA127RA008

Archive Date

Dec 5, 2026

Office Address

REDSTONE ARSENAL, AL, 35898-7340