GovChime
Notice ID: b14440e633284e20abb9a7980100d15bSpecial NoticeArchived

Notice of Intent to Sole Source USAFA Autoclave System and Reverse Osmosis System

Archived on August 22, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
11:00 AM MDT
Posted
August 5, 2026
Notice type
Special Notice
Set-aside
No Set aside used
NAICS
339113: Surgical Appliance and Supplies Manufacturing
Agency
Department of WarDepartment of the Air Force

Notice details

Office
FA7000 10 CONS LGC
Place of performance
USAF Academy, 80840
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Notice ID
b14440e633284e20abb9a7980100d15b

Description

The United States Air Force Academy (USAFA) intends to award a sole-source, Firm-Fixed-Price contract to Getinge USA Sales, LLC (Getinge) under the simplified procedures for commercial products in accordance with RFO Part 12. The proposed North American Industry Classification System (NAICS) Code is 339113 (Surgical Appliance and Supplies Manufacturing). Requirement: The USAFA Dean of Faculty Department of Biology (DFBI) requires the lifecycle replacement of one Autoclave System and one Reverse Osmosis (RO) System for use by over 800 Cadets per year for critical daily operations, including sterilizing materials for classes and research and processing biohazardous waste. The systems must meet the following salient characteristics: Steam Sterilizer System (Autoclave) Quantity: One (1) new system Chamber volume: At least 275L Gravity Cycles: Capable of 110C – 135C temperatures Vacuum Cycles: Capable of 110C – 135C temperatures Liquid Cycles: Capable of 104C – 135C temperatures Exterior Dimensions (W x H x D): Close to 30” x 74” x 48” Configuration: Freestanding unit Utilities: Integrated electric steam generator with 480V AC, 60Hz, 3-phase electrical requirements; sterilizer control with 115V AC, 60Hz, 1-phase electrical requirements Control Interface: Touchscreen interface and a PACS 3500 Programmable Logic Controller with preprogrammed cycles Safety Features: Chamber safety interlock and steam safety valves to protect against over pressurization Reverse Osmosis (RO) Water Treatment System Quantity: One (1) new system Configuration: Wall-mounted system with associated bladder tank Utilities: 115V, 60Hz, 1-phase electrical requirements Capacity: Capability to produce up to 400 gallons per day of RO water Rough Dimensions (L x W x D): Close to 38” x 26” x 7” Filter Elements: 3 pre-filters and single membrane Bypass: Manual bypass capability Feeder: Polyphosphate feeder cartridge Removal and Installation Services Deinstallation, removal, and complete haul-away of the Department's existing Autoclave and RO systems. Turnkey installation, final utility connections, calibration, and startup testing of the new system. Justification: In accordance with RFO 12.102(a), the Government has determined that only one source is reasonably available to fulfill this requirement. Market research and responses to a prior Request for Information (RFI) confirmed that alternative manufacturer models that meet the minimum 275L chamber volume are physically too large to fit into the laboratory room’s highly restricted, pre-built spatial footprint. Getinge is the only known manufacturer whose 275L unit complies with the strict physical room dimensions. Additionally, DFBI currently has an active preventative maintenance and service contract with Getinge for other departmental laboratory autoclaves. Standardizing on Getinge equipment allows the Government to integrate this new system under the existing active maintenance contract immediately. This standardizes training for laboratory technicians and biological safety personnel, ensures immediate compatibility of replacement parts, and reduces administrative and logistical overhead by avoiding the management of multiple service contracts. To prevent unacceptable supply chain, installation, and biological safety certification risks, the Government requires this procurement to be executed directly with Getinge USA Sales, LLC to guarantee OEM-certified utility connections, check-out, and warranty integration. Disclaimer: This notice of intent is not a request for competitive quotations, and a formal solicitation will not be issued. However, any responsible source that believes it can meet these requirements may submit a capability statement. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination not to compete this action is solely within the discretion of the Government. Responses: Submit capability statements electronically to Nicole Cibula at nicole.cibula@us.af.mil and Amy Krause at amy.krause.1@us.af.mil by 11:00 AM (MDT) on 7 August 2026.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (1)

  • Autoclave and Reverse Osmosis QnA.pdf

    51 KBAdded in Sources Sought version 3Posted
    Download

Lifecycle

  1. 2
    Version 2Sources SoughtArchived

    USAFA Autoclave System and Reverse Osmosis System RFI

    Notice cfca2398b46248afa51e882733af719e on SAM.gov

  2. 5
    Version 5Special NoticeArchivedCurrent

    Type changed from Sources Sought to Special Notice

    Notice of Intent to Sole Source USAFA Autoclave System and Reverse Osmosis System

    Notice b14440e633284e20abb9a7980100d15b on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Amendment 001 to Solicitation #36C25927Q0025 (Air-powered chiropractic tables) This amendment s purpose is to list and answer the questions submitted by the questions deadline as specified in the solicitation. Questions and Answers: CLIN 0018 is listed as "Delivery," but the solicitation states freight shall be added to another line item and not be its own line item. How should offerors handle delivery/freight pricing? Freight costs may be added to the delivery line item if the offeror deems appropriate. Is any on-site installation or assembly required at the SLC or Ogden facilities, or is this delivery of the equipment only? The expectation is that the tables are pre-assembled and will be easy to place in the clinics. However, if the tables are NOT pre-assembled, the offeror should include installation/assembly fees into the delivery line item and ensure it is noted. For an "or equal" product, will an Authorized Distributor Letter from the manufacturer of the equal product we quote satisfy VAAR 852.212-71(c), or must the letter be from Hill Laboratories specifically? The Authorized Distributor Letter must be from the manufacturer of the brand the offeror is proposing. Offerors would only need to provide a letter from Hill Laboratories IF they are offering the Government the Hill Laboratories product. Installation scope: The section is titled "Delivery and Installation," but no installation tasks are listed. Should the price include inside delivery to the treatment room, uncrating, assembly, set-up/leveling, functional testing, packaging and debris removal, and staff in-service training? If so, please name the rooms and floors at each site. The expectation is for the tables to be delivered pre-assembled to the facility. The VA staff would then take possession of the items and move them to the clinic space. The Offeror should include installation/assembly costs IF the tables are not delivered pre-assembled. Delivery windows and access: Please give the allowed delivery days and hours, receiving dock or entrance, elevator access, any check-in or escort steps, and a point of contact at each site (George E. Wahlen VAMC, 500 Foothill Dr., Salt Lake City; Ogden CBOC, 2945 South Washington Blvd., Suite 1, South Ogden). Are deliveries to the 2 sites allowed on different dates? Deliveries may occur on different dates if needed. Deliveries shall be made between 0700 and 1700 Mondays through Fridays (except on Federal holidays). Required delivery date: Is there a required or target delivery date, or a maximum lead time in calendar days after award? A target delivery date is not available. Offerors are encouraged to provide the most accurate delivery lead time possible based on information currently available from the manufacturer. This is an evaluation factor so Offeror s information will be compared. Freight vs. line 0018: The RFQ says freight shall be added to another line item and not be its own line item, but line 0018 is "Delivery." Should delivery/installation be priced on line 0018, or included in line 0001 with 0018 shown as "Included with line item 0001"? Freight costs may be added to the delivery line item if the offeror deems appropriate. If the tables are not pre-assembled, the Offeror will need to include installation/assembly fees in the delivery line item total. *Be sure to make a note that installation/assembly is needed. Removal of existing tables: Is the contractor expected to remove and dispose of any existing tables at either site? If yes, how many, which models, and is there a VA disposal process? No removal or disposal services are required for this requirement. "Or equal" salient characteristics: The RFQ says "air powered - NOT pneumatic or hydraulic." Air-powered systems run on compressed air, which is usually described as pneumatic. Please clarify what this requirement excludes so that "equal" products can be judged fairly. Salient characteristics updated to: Must be air powered/pneumatic NOT hydraulic Option lines: For an "equal" product, may an option that is standard on that product be shown as "Included with line item 0001"? Must each brand-name part number (for example, AF-F15, 92CS, 97) be matched one for one? Each line item does not need to be matched one for one. However, the Offeror should ensure the components listed in the line items are included in the table. Please ensure a note is provided if the brochures/specification documents do not clearly show those items are included with the table. Height and width: Does a maximum height of exactly 29" meet the requirement, and is the 27" width (line 0017) the required width? The tables must be able to reach at least 29 but if the table is able to exceed this height (up to ~ 32 ) that would be preferred. The width dimension of the table must be between 27 and 33 Authorized distributor letter: Is the OEM letter (VAAR 852.212-71(c)) required for all offerors who are not the OEM, including authorized dealers? Must it name this solicitation, or is a general authorization letter on OEM letterhead acceptable? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Contractor access/PIV: Clauses 852.204-70/72 are included, but all risk levels are marked N/a. Please confirm that delivery and installation staff will not need a background check or PIV card, and that a visitor badge and escort is enough? The expectation is for the tables to be pre-assembled and the Offeror would only need to deliver the item to the warehouse dock/facility. No access to the facility is anticipated although the VA staff may accompany the Offeror if delivery/installation/assembly is needed. Warranty/service: Should on-site labor warranty or service be included, or only the minimum 1 year parts warranty? Minimum 1-year parts warranty; additional on-site and/or service warranty appreciated but not mandatory Page limits: The RFQ mentions page limitations but does not state any. Is there a page limit for any volume? No page limits are present for this solicitation. However, Offerors should be mindful of potential email size limitations. Option to Extend Services (52.217-8) and Service Contract Labor Standards (52.222-41/43) are included. Please confirm whether they apply to this one-time supply purchase with installation. FAR 52.217-8 was included in case an extension to the period of performance is needed. SCLS does not apply to this requirement. Deadline time zone. The RFQ states quotes are due 12:00 PM MST on 30 October 2026, while SAM.gov lists the response deadline at UTC-06:00 (MDT). Please confirm the controlling local time for submission. The deadline is 12pm MT on 10/30/2026. Delivery pricing. The instructions state freight shall be added to another line item and not be its own line item, yet the schedule includes line item 0018 "Delivery." Should delivery/freight be priced in line item 0018, or folded into line item 0001 with 0018 marked accordingly? Freight costs may be added to the delivery line item if the offeror deems appropriate. If the tables are not pre-assembled, the Offeror will need to include installation/assembly fees in the delivery line item total. *Be sure to make a note that installation/assembly is needed. Installation. Is installation/set-up of the tables required at either delivery location (Salt Lake City and Ogden), or is delivery only required? If set-up is required, will VA personnel escort access be arranged through the receiving facility? If the tables are pre-assembled, installation shall not be required. However, if assembly of the table is required, the Offeror should include those costs in their quote and should plan to be onsite to install/assemble each table. VA staff may escort visitors IF installation/assembly of the product is needed. This may be discussed during the post-award meeting. Authorized distributor letter. Must the VAAR 852.212-71(c) letter from the OEM name the offeror specifically, or is a general letter of authorization from the manufacturer sufficient? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Line item 0013 option code. Line item 0013 references option "92CSAF" (rocker foot pedal substitute for air at foot end). Please confirm this is the correct Hill Laboratories option code for the requested item. Yes, this is the correct code Installation: the delivery section is titled "Delivery and Installation" and asks for lead time "including installation, if applicable." Is any installation, assembly or setup required, or is delivery to the receiving area at each site sufficient? The station team will either expect the table to come pre-assembled OR the Offeror will need to plan to assemble the tables onsite. Any fees associated with installation/assembly should be included in the delivery line item. If the tables are already pre-assembled, then the VA staff will be able to take possession of the item upon delivery and then they will move the table to the clinic location. Authorized distributor letter (VAAR 852.212-71(c)): if the offeror is not the manufacturer, will a letter from the manufacturer authorizing the offeror to supply this specific order satisfy the requirement? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Required delivery date: is there a required delivery date or a maximum acceptable lead time after award? A target delivery date is not available. Offerors are encouraged to provide the most accurate delivery lead time possible based on information currently available from the manufacturer. This is an evaluation factor so Offeror s information will be compared. May a small-business equipment distributor registered under NAICS 423450 submit a quotation for this solicitation, which is assigned NAICS 339113? NAICS 423450 shows a size standard of 200 employees while the NAICS for this requirement, 339113, is 800 employees. Therefore, as long as the Government is able to verify the Offeror has a NAICS in which it confirms their company size is below 800 employees, the Offeror should not be considered ineligible Does the SBA nonmanufacturer rule apply to this procurement, and if so, is a waiver available? Since this requirement is set-aside for small businesses, and the requirement is not expected to exceed the Simplified Acquisition Threshold, the limitations associated with the nonmanufacturer rule shall not apply. Offerors may provide products manufactured by both small and large businesses. Would an authorized reseller offering the specified Hill Laboratories equipment qualify, provided all technical specifications and manufacturer authorization requirements are satisfied? Yes. Offerors who obtain an authorized distributor letter from Hill Laboratories may submit a quote package to include the Hill Laboratories products. Air system: The specifications require air power but exclude pneumatic systems. Is the Hill Air Flex II s compressed-air system acceptable? The previous specification had a typo the system should be air-powered/pneumatic system. Headpiece: CLIN 0004 specifies an air-activated forward/straight drop, while the salient characteristics require a manual drop. Which is required? Please also confirm the intended configuration for AF-F22 headpiece motion with AF-F27 automatic distraction. Air powered drop is required. The distraction motion required is intended to stretch the neck in a superior motion like a decompression table would do and requires a headpiece to attach to the table so this distraction therapy can be done. See example video of how this feature should operate. https://www.youtube.com/watch?v=NEYLT0R_meA Weight: Does the 300 lbs. maximum include all installed accessories? Is there an allowable tolerance for the fully configured brand-name table? The weight of the table can exceed 300lbs if needed because of other accessories. The table itself should not exceed 300 lbs. Delivery: Please confirm the required delivery timeframe and whether room placement, setup, functional testing, demonstration, and packaging removal are required at both locations. The delivery timeline will be discussed with the awarded vendor after award of contract. Offerors shall provide their best estimate of the delivery/lead time for the items within their quote package as this will be compared to other quotes. It is common for the tables to be pre-assembled so only delivery to the facility would be expected unless assembly is needed for a brand of table. Offerors should factor in the installation/assembly time and costs IF there are any. Freight pricing: Should delivery be priced under CLIN 0018 or incorporated into the equipment lines, given the instruction against a separate freight line? Offerors shall use their best judgement. It may be easiest to just include any delivery and installation/assembly costs under line item 0018 but that is not mandatory. Reseller authorization: Will an OEM letter authorizing __ to supply the specified equipment for this solicitation satisfy the authorization requirement? Yes. A letter or email from the OEM stating the offeror is authorized to provide their product to the Government is sufficient. Deadline time zone: Please confirm whether the October 23 question deadline and October 30 quote deadline are noon Denver local time (MDT) or noon MST. The deadlines are Mountain Time. We are currently in MDT but this shall change to MST on 11/1/2026. This acquisition is a Total Small Business Set-Aside under NAICS 339113. The referenced brand, Hill Laboratories, appears to be other than small. FAR 52.219-33 (Nonmanufacturer Rule) is listed in the clause matrix but is not marked applicable. Please confirm whether the Nonmanufacturer Rule applies, and if so, whether an SBA class waiver is in place that would permit a small business offeror to supply the Air Flex II or an equal product from a large manufacturer. Since this requirement is set-aside for small businesses, and the requirement is not expected to exceed the Simplified Acquisition Threshold, the limitations associated with the nonmanufacturer rule shall not apply. Offerors may provide products manufactured by both small and large businesses. **The manufacturer for the Air Flex II, Hill Laboratories, has been confirmed to be a small business per SAM.gov Reps and Certs. The Description states "Freight shall be added to another line item and not be its own line item," but Line Item 0018 is titled "Delivery" with a quantity of 2 EA. Please clarify where freight should be priced. The Offeror may add the cost of freight to the delivery line item (#0018) or to the first line item if appropriate. The salient characteristics cap the weight of the table and equipment at 300 lbs. Please confirm whether this applies to the base table only or to the fully configured table with all listed options. This applies to base table only. Please confirm that Line Item 0018, quantity 2 EA, represents one delivery to each of the two locations. Correct, the quantity of 2 is due to one table EACH needing to be delivered to two separate locations. Therefore, delivery would be completed as two jobs. For the VAAR 852.212-71(c) manufacturer authorization, is a signed letter from the OEM on its letterhead (naming __ as an authorized distributor for this solicitation) sufficient, or is a specific format required? No specific format. Just some letter/email from the OEM stating the Offeror is authorized to sell their product to the Government. If an "equal" product is offered, should the authorization letter come from that product's manufacturer? Yes. An authorization letter is only needed from the OEM of the brand product the Offeror is offering. Is a delivery lead time after award stated in days (e.g., ARO) acceptable for Volume III, or is there a required delivery date? Yes. Offerors shall indicate the estimated number of days After Receipt of Order (ARO) of the contract in which the Offeror would be able to deliver the product to the locations once they receive the awarded contract. A specific date is not needed as the Government understands that it would be difficult to calculate since we do not know the specific date in which this requirement will be awarded.
-Combined Synopsis10/30/2026
The Peterson Space Force Base (PSFB) 21st Contracting Squadron is requesting information from vendors that provide the subject brand name items. The North American Industry Classification System (NAICS) code is 334220 Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing, and the small business size standard is 1,250 Employees. This sources sought is issued for the purpose of market research in accordance with RFO Part 10. PSFB, CO is requesting information for the subject part number for Market Research Purposes. The result of this market research will contribute to determining the method of procurement.
-Market Research11/13/2026
This is a sources sought notice. The Defense Logistics Agency (DLA) Troop Support is seeking sources capable of providing Medtronic cardiovascular "procedural packages". The "procedural package" includes the cardiovascular products and ancillary accessories (such as needles for entry and guidewire) that are necessary for the physician to perform the cardiovascular surgeries. The product mix that makes up the "procedural package" varies based on the individual needs of the patient. All products must be approved by the Food and Drug Administration (FDA). The products that make up the “procedural package” must be delivered Just-In-Time (JIT), Direct Vendor Delivery (DVD) and Consignment. Under the JIT delivery method, the Medical Treatment Facility (MTF) calls the manufacturer’s field representative who carries the products into the MTF just-in-time for the surgery. The manufacturer’s sales representative may bring many sizes and types of implants and other auxiliary products to the surgery along with the instrumentation sets. Under the DVD method an order for products is placed through ECAT and the products are delivered direct to the customer via any transportation carrier. Under the consignment method, a Medical Treatment Facility (MTF) will have the products that make up the procedural package consigned to their facility. At the request of the MTF’s, the manufacturer is required to have a qualified representative on site at the MTF’s within the timeframe specified by the facility necessary to meet their requirements. The manufacturer’s representative provides technical advice and guidance to the physicians before, during and after implantation. Furthermore, technical support is available twenty-four (24) hours a day, seven (7) days a week. This is a Request For Information (RFI) and does not commit the U.S. Government to issue a solicitation, make an award or pay any costs associated with responding to this announcement. All submitted information shall remain with the U.S. Government and will not be returned. Your response to this RFI shall be submitted electronically in PDF format and emailed to kathleen.adamow-wandall@dla.mil
-Market Research11/20/2026
Procure Portable Eye Wash Stations for use onboard the USNS CODY (T-EPF 14).
-Combined Synopsis11/05/2026
-AwardedOpen

Additional Details

Solicitation Number

USAFAAutoclaveSystemandReverseOsmosisSystem

Archive Date

Aug 22, 2026

Office Address

USAF ACADEMY, CO, 80840-2303