Market Survey for Procurement of Spares in Support of the ASN-128 Doppler Navigation System
Archived on February 14, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM EST
- Posted
- January 13, 2026
- Notice type
- Sources Sought
- Set-aside
- No Set aside used
- NAICS
- 334418: Printed Circuit Assembly (Electronic Assembly) Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- AMC.ACC.ACC-CTRS.ACC-APG.W6QK ACC-APG
- Place of performance
- Wayne, New Jersey, 07470
- Last updated
- Nov 4, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- W15P7T-26-RFI-Spares_ASN-128_Doppler_Navigation_System
- Notice ID
- 7a388ff88a4d44ad99a978c78ca4e5cb
Description
The Army Contracting Command - Aberdeen, on behalf of the Army Integrated Logistics Supply Center (ILSC) – Supply Chain Management Directorate (SCMD) – Strategic Sourcing Directorate (SSD), intends to acquire Parts to support the ASN-128 Doppler Navigation System.
Requirements Description:
The items to be procured are repairs for the ASN-128 Doppler. BAE Systems is the original developer and integrator of the Doppler Navigation System. The Government does not possess specifications or detailed drawings for the referenced system. The parts include electronic components that must interface with the current system configurations. Please note that this is not a Request for Proposal. This notice is provided for planning purposes and is not to be construed as a commitment by the U.S. Government.
The Government does not possess the technical data package (TDP) for the parts.
The intent is to receive Increment 7 pricing for the NIINs provided. This follows expiring Increment 6 pricing. This is the first acquisition to procure spare parts for this system.
The following additional NAICS apply:
334418
Items and/or Services to Be Procured:
NSN: 5998-01-135-2366
NOMENCLATURE: CIRCUIT CARD ASSEMB
PART NUMBER: SM-D-858968
CAGE: 80063
NSN: 5998-01-530-4534
NOMENCLATURE: CIRCUIT CARD ASSEMB
PART NUMBER: H585A039-02
CAGE: 0D0D0
NSN: 5895-01-064-1841
NOMENCLATURE: CONVERTER,SIGNAL DA
PART NUMBER: SM-D-858425
CAGE: 88818
Requested Response Information:
We request that sources who can manufacture the listed parts or services to submit information to show their capability to manufacture the same part. At a minimum the support information you submit should include, but is not limited to, the following types of documentation: Questionnaire, drawings, test results, information on previous Government and commercial contracts, data rights, etc.
In your response, please include your company name, CAGE code, and a technical point of contract with email address and telephone number.
Notice, Response Due Date, and Points of Contact:
This is NOT a Request for Quote or Proposal. The Government does not intend to award a contract on the basis of this SSA or reimburse any costs associated with the preparation of responses to this SSA. This Sources sought announcement (SSA) is for planning and market research purposes only and shall not be construed as a commitment by the Government. The information gathered from this announcement will be used to determine if responsible sources exist, and to assist in determining if this effort can be competitive and/or set aside for Small Business. Furthermore, the Government will use the information, in part, to determine the best acquisition strategy for a potential procurement action and/or to assist in making acquisition strategy decisions in the future.
This is a sources-sought announcement only for informational and planning purposes and does not constitute a solicitation. This Request for Information (RFI) is being issued to accomplish market research and support planning for the below listed requirements. The Government will not pay for any information or reimburse any costs incurred in responding to this RFI. No solicitation is being issued at this time. All information submitted in response to this announcement is voluntary. Not responding to this RFI does not preclude participation in any future RFP, if any is issued. If a solicitation is released, it will be synopsized on the SAM.gov site. It is the responsibility of the potential offerors to monitor this site for additional information pertaining to this requirement.
All SSA responses should be emailed to the Points of Contact at the email addresses listed below. No phone inquiries will be accepted, either as a response to this action or for information requests. All requests for information must be submitted via email to the Technical Point of Contact and the ACC Aberdeen Small Business Office.
Please submit responses by 1/30/2026
Technical Point of Contact: mark.w.colangelo.ctr@army.mil
Secondary Point of Contact: acia.c.sands.civ@army.mil
ACC Aberdeen Small Business: usarmy.apg.cecom.mbx.small-business-outreach@army.mil
Contractor Questionnaire
Please complete the following questions. If a question does not apply, please enter N/A or non-applicable.
- Provide a brief summary of your company and its core competencies.
2. Please provide the following Point of Contact information on all responses:
Company:
Address:
Point of Contact:
Phone Number:
Fax Numbers:
Email Address:
CAGE Code:
DUNS Number:
3. Describe your Company's past performance in the manufacturing and/or supplying of the listed items in the past. Provide Contract Number, Point of Contact (POC), e-mail address, phone number, and a brief description of your direct support of the effort.
4. Describe the qualifications of your engineering staff who have experience in the design and production of supplies similar in complexity and technology to power supplies, circuit cards, data processors, and other electronic items.
5. Describe your company's experience in identifying the test equipment for components similar in complexity and technology to what is used in the listed items to include power supplies, circuit cards, data processors, and other electronic items..
6. Describe your company's experience and process for managing obsolescence issues.
7. Does your company maintain a Program and Assessment Tool to monitor and analyze the availability of components to allow clear and precise tracking of all obsolescence issues? If so, please elaborate on the Program and Assessment tool(s).
8. Describe your company's experience in identifying alternatives for unavailable or obsolete materials or components to mitigate obsolescence issues.
9. Discuss your company's capability to meet US Government delivery requirements for this specific product.
10. The Government prefers Long Term. Can your company meet the Government preference. If not, please describe what you are willing to provide.
11. The Government prefers IDIQ. Can your company meet the Government preference. If not, please describe what you are willing to provide or what you would prefer to provide. Please explain.
12. Do you have product(s) or keep products in stock?
13. Are there any vendors in your supply chain that you are concerned would prevent you from meeting the Government delivery schedule? – If so, please describe the company and what steps you are taking or have taken to mitigate. If it is a Government-directed source, please describe any other vendors that may have the capability to meet the delivery schedule.
14. The Government is considering requesting range pricing for the following NIINs for a quantity range. Can you provide input on these ranges/are there any quantity price break points the government should know about?
15. What is the production lead time for this part?
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
- 3Version 3Sources SoughtArchivedCurrent
Market Survey for Procurement of Spares in Support of the ASN-128 Doppler Navigation System
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This is a combined synopsis/solicitation for commercial products prepared in accordance with FAR Part 12, as revised by the Revolutionary Federal Acquisition Regulation Overhaul (RFO), and applicable Defense FAR Supplement (DFARS) class deviations. This announcement constitutes the only solicitation. Quotations are requested, and a separate written solicitation will not be issued. Solicitation PANERD-27-P-0000-028101 is issued as a Request for Quotation (RFQ) for brand-name WaterLinked Sonar Systems and Doppler Velocity Logs (DVL). This acquisition is a 100% small business set-aside. Only eligible small business concerns under the assigned NAICS code and size standard will be considered for award. The Government intends to issue one firm-fixed-price purchase order for the complete requirement. See the attachment for additional details. | 51% | Combined Synopsis | 11/20/2026 |
The United States Government is conducting market research to identify potential sources that may posess the expertise, capabilities, and experience to meet the requirements for qualification and production of S-Band Radio Frequency Calibration Backplane Assemblies. Security Requirements: The level of security clearance and amount of foreign participation in this requirement has not been determined; however, the Contractor should anticipate working with teams consisting of military, civilian, national partners, and contract personnel from various services and agencies. DISCLAIMER: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP), REQUEST FOR QUOTE (RFQ) OR AN INVITATION FOR BID (IFB). IN ACCORDANCE WITH FAR 15.201(e), THIS NOTICE DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT.NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. THE GOVERNMENT MAY USE THE INFORMATION OBTAINED FROM RESPONSES TO THIS NOTICE IN DETERMINING ITS ACQUISITION APPROACH. THE ISSUANCE OF THIS NOTICE DOES NOT RESTRICT THE GOVERNMENT ACQUISTION APPROACH. The documents below contain a description of the RFCBA requirements, technical data package, and a Contractor Capability Survey. The Survey allows Contractors to provide their company's capability. Attention Small Business Respondents who are interested in participation for this effort: 1. No set aside decision has been made; however, the USG will determine the final strategy after thorough analysis of the small business responses and other market research available, considering the demonstrated interest and capability. Please ensure that you provide a thorough response to each question. If you company does not currently possess the full capability required to fulfill the entire requirment, what teaming/partnership/joint venture/subctonracting arrangements do you have in place to fulfill the Government's needs? Provide evidence of this arrangement e.g. emails, letter, etcl. that demonstrate a united response to this Sources Sought is highly encouraged, but not required. The evidence should state the type of arrangement and the role each member will fulfill. If you are only interested in being a subcontractor to the future awardee, state the portion of the work your organization has capability of fulfilling. 2. Identify any areas of work that your organization believes should be broken out exclusively for Small Businesses. Both Large and Small Businesses are encouraged to participate in this Market Research. Joint Ventures or Teaming Arrangements are encouraged. Questions relative to this market survey should be addressed to Brandon Jones, Contracting Officer, AFLCMC/ESGK-R (brandon.jones.96@us.af.mil) and Elizabeth Fuller (elizabeth.fuller.2@us.af.mil), Lead System Engineer, and Robert Cowden (robert.cowden.ctr@us.af.mil). Contract or Acquisition Specific questions shall be soley directed to the Contracting Officers. All questions shall be submitted in writing. Responses shall be received no later than the date identified in this posting. | 51% | Market Research | 11/30/2026 |
The United States Government is conducting market research to identify potential sources that may possess the expertise, capabilities, and experience to meet the requirements for qualification and production of S-Band Radio Frequency Power 18:1 Divider/Combiner (RFPDC). Security Requirements: The level of security clearance and amount of foreign participation in this requirement has not been determined; however, the Contractor should anticipate working with teams consisting of military, civilian, national partners, and contract personnel from various services and agencies. DISCLAIMER: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP), REQUEST FOR QUOTE (RFQ) OR AN INVITATION FOR BID (IFB). IN ACCORDANCE WITH FAR 15.201(e), THIS NOTICE DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT.NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. THE GOVERNMENT MAY USE THE INFORMATION OBTAINED FROM RESPONSES TO THIS NOTICE IN DETERMINING ITS ACQUISITION APPROACH. THE ISSUANCE OF THIS NOTICE DOES NOT RESTRICT THE GOVERNMENT ACQUISTION APPROACH. The documents below contain a description of the Radio Frequency Power 18:1 Divider/Combiner (RFPDC) requirements, technical data package, and a Contractor Capability Survey. The Survey allows Contractors to provide their company's capability. Attention Small Business Respondents who are interested in participation for this effort: 1. No set aside decision has been made; however, the USG will determine the final strategy after thorough analysis of the small business responses and other market research available, considering the demonstrated interest and capability. Please ensure that you provide a thorough response to each question. If you company does not currently possess the full capability required to fulfill the entire requirment, what teaming/partnership/joint venture/subctonracting arrangements do you have in place to fulfill the Government's needs? Provide evidence of this arrangement e.g. emails, letter, etcl. that demonstrate a united response to this Sources Sought is highly encouraged, but not required. The evidence should state the type of arrangement and the role each member will fulfill. If you are only interested in being a subcontractor to the future awardee, state the portion of the work your organization has capability of fulfilling. 2. Identify any areas of work that your organization believes should be broken out exclusively for Small Businesses. Both Large and Small Businesses are encouraged to participate in this Market Research. Joint Ventures or Teaming Arrangements are encouraged. Questions relative to this market survey should be addressed to Brandon Jones, Contracting Officer, AFLCMC/ESGK-R (brandon.jones.96@us.af.mil) and Elizabeth Fuller (elizabeth.fuller.2@us.af.mil), Lead System Engineer, and Robert Cowden (robert.cowden.ctr@us.af.mil). Contract or Acquisition Specific questions shall be soley directed to the Contracting Officers. All questions shall be submitted in writing. Responses shall be received no later than the date identified in th | 51% | Market Research | 11/30/2026 |
The United States Government is conducting market research to identify potential sources that may possess the expertise, capabilities, and experience to meet the requirements for qualification and production of X-Band Digital Backplane Aseembly. Security Requirements: The level of security clearance and amount of foreign participation in this requirement has not been determined; however, the Contractor should anticipate working with teams consisting of military, civilian, national partners, and contract personnel from various services and agencies. DISCLAIMER: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP), REQUEST FOR QUOTE (RFQ) OR AN INVITATION FOR BID (IFB). IN ACCORDANCE WITH FAR 15.201(e), THIS NOTICE DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT.NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. THE GOVERNMENT MAY USE THE INFORMATION OBTAINED FROM RESPONSES TO THIS NOTICE IN DETERMINING ITS ACQUISITION APPROACH. THE ISSUANCE OF THIS NOTICE DOES NOT RESTRICT THE GOVERNMENT ACQUISTION APPROACH. The documents below contain a description of the DPA requirements, technical data package, and a Contractor Capability Survey. The Survey allows Contractors to provide their company's capability. Attention Small Business Respondents who are interested in participation for this effort: 1. No set aside decision has been made; however, the USG will determine the final strategy after thorough analysis of the small business responses and other market research available, considering the demonstrated interest and capability. Please ensure that you provide a thorough response to each question. If you company does not currently possess the full capability required to fulfill the entire requirment, what teaming/partnership/joint venture/subctonracting arrangements do you have in place to fulfill the Government's needs? Provide evidence of this arrangement e.g. emails, letter, etcl. that demonstrate a united response to this Sources Sought is highly encouraged, but not required. The evidence should state the type of arrangement and the role each member will fulfill. If you are only interested in being a subcontractor to the future awardee, state the portion of the work your organization has capability of fulfilling. 2. Identify any areas of work that your organization believes should be broken out exclusively for Small Businesses. Both Large and Small Businesses are encouraged to participate in this Market Research. Joint Ventures or Teaming Arrangements are encouraged. Questions relative to this market survey should be addressed to Brandon Jones, Contracting Officer, AFLCMC/ESGK-R (brandon.jones.96@us.af.mil) and Elizabeth Fuller (elizabeth.fuller.2@us.af.mil), Lead System Engineer, and Robert Cowden (robert.cowden.ctr@us.af.mil). Contract or Acquisition Specific questions shall be soley directed to the Contracting Officers. All questions shall be submitted in writing. Responses shall be received no later than the date identified in this posting. | 51% | Market Research | 11/30/2026 |
Controller and GPS for Uncrewed Aircraft Systems. A specifications document or datasheet is required with all quotes. | 47% | Combined Synopsis | 09/17/2026 |
Additional Details
Solicitation Number
W15P7T-26-RFI-Spares_ASN-128_Doppler_Navigation_System
Archive Date
Feb 14, 2026
Office Address
ABERDEEN PROVING GROU, MD, 21005-1846