GovChime
Notice ID: d202290d65b344b0974ef8b770e06ba0Award NoticeAwardedArchived

5.56mm M1042 Loose and M1071 Linked Marking Ammunition for Use in Close Combat Mission Capability Kit

Awarded on August 25, 2026. Full description on SAM.gov.

Awarded tounder W15QKN-26-D-A102 (source: SAM.gov award notice)• $257.4M

Overview

Posted
August 25, 2026
Notice type
Award Notice
Set-aside
No Set aside used
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.ACC-CTRS.ACC-NJ.W6QK ACC-RI-PICATINNY
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov
Award date
Aug 25, 2026
Award amount (SAM.gov award notice)
$257.4M

Identifiers

Solicitation number
W15QKN-26-D-A102
Notice ID
d202290d65b344b0974ef8b770e06ba0
Award number (PIID)
W15QKN-26-D-A102

Description

This contract was awarded under Title 10 United States Code (U.S.C.) Section 3204(a)(1); as implemented in FAR 6.103-1 Only one responsible source and no other supplies or services will satisfy agency requirements.

Full description on SAM.gov

Award Overview

Award Number

W15QKN-26-D-A102

Award Amount (SAM.gov award notice)

$257.4M

Award Date

Aug 25, 2026

Awardee

Awardee UEI

SYQ8B2BGCFK5

Awardee CAGE Code

KE396

Awardee Address

Bury St Edmunds, IP28 7AS, UNITED KINGDOM

Original Solicitation

Notice ID: d202290d65b344b0974ef8b770e06ba0

Posted Date: Aug 25, 2026

Original Response Deadline: Not specified

Contract Details

Contract data not yet available

Contract details typically appear within 2-4 weeks after award; DoD awards are published about 90 days after signature.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (16)

  • JA_5.56mm CCMCK_20260305_W15QKN-26-R-A010- REDACTED_Redacted_Page_16.jpg

    190 KBAdded in Award Notice version 4Posted
    Download
  • JA_5.56mm CCMCK_20260305_W15QKN-26-R-A010 - REDACTED_Redacted_Page_08.jpg

    395 KBAdded in Award Notice version 4Posted
    Download
  • JA_5.56mm CCMCK_20260305_W15QKN-26-R-A010- REDACTED_Redacted_Page_15.jpg

    144 KBAdded in Award Notice version 4Posted
    Download
  • JA_5.56mm CCMCK_20260305_W15QKN-26-R-A010- REDACTED_Redacted_Page_09.jpg

    244 KBAdded in Award Notice version 4Posted
    Download
  • JA_5.56mm CCMCK_20260305_W15QKN-26-R-A010- REDACTED_Redacted_Page_13.jpg

    83 KBAdded in Award Notice version 4Posted
    Download
  • JA_5.56mm CCMCK_20260305_W15QKN-26-R-A010- REDACTED_Redacted_Page_02.jpg

    144 KBAdded in Award Notice version 4Posted
    Download
  • JA_5.56mm CCMCK_20260305_W15QKN-26-R-A010- REDACTED_Redacted_Page_10.jpg

    207 KBAdded in Award Notice version 4Posted
    Download
  • JA_5.56mm CCMCK_20260305_W15QKN-26-R-A010- REDACTED_Redacted_Page_14.jpg

    59 KBAdded in Award Notice version 4Posted
    Download
  • JA_5.56mm CCMCK_20260305_W15QKN-26-R-A010- REDACTED_Redacted_Page_07.jpg

    257 KBAdded in Award Notice version 4Posted
    Download
  • JA_5.56mm CCMCK_20260305_W15QKN-26-R-A010- REDACTED_Redacted_Page_11.jpg

    175 KBAdded in Award Notice version 4Posted
    Download
  • JA_5.56mm CCMCK_20260305_W15QKN-26-R-A010- REDACTED_Redacted_Page_06.jpg

    91 KBAdded in Award Notice version 4Posted
    Download
  • JA_5.56mm CCMCK_20260305_W15QKN-26-R-A010- REDACTED_Redacted_Page_12.jpg

    57 KBAdded in Award Notice version 4Posted
    Download
  • JA_5.56mm CCMCK_20260305_W15QKN-26-R-A010- REDACTED_Redacted_Page_04.jpg

    51 KBAdded in Award Notice version 4Posted
    Download
  • JA_5.56mm CCMCK_20260305_W15QKN-26-R-A010- REDACTED_Redacted_Page_05.jpg

    237 KBAdded in Award Notice version 4Posted
    Download
  • JA_5.56mm CCMCK_20260305_W15QKN-26-R-A010- REDACTED_Redacted_Page_03.jpg

    98 KBAdded in Award Notice version 4Posted
    Download
  • JA_5.56mm CCMCK_20260305_W15QKN-26-R-A010- REDACTED_Redacted_Page_01.jpg

    53 KBAdded in Award Notice version 4Posted
    Download

Lifecycle

  1. 1
    Version 1Solicitation

    5.56mm M1042 Loose and M1071 Linked Marking Ammunition for Use in Close Combat Mission Capability Kit

    Notice ae995a4c55ce4afa81bf9361cbdec09c on SAM.gov

  2. 4
    Version 4Award NoticeArchivedCurrent

    Type changed from Solicitation to Award Notice

    5.56mm M1042 Loose and M1071 Linked Marking Ammunition for Use in Close Combat Mission Capability Kit

    Notice d202290d65b344b0974ef8b770e06ba0 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
***Amendment 0001*** Industry Question One, The listing says, The estimated quantity to be purchased is approximately 6.3 million M1162 and M1163 cartridges. Is that:6.3 million M1162 and M1163, each, per year? 6.3 million total M1162 and M1163 per year? 6.3 million M1162 and M1163, each, through the life of the contract? 6.3 million, M1162 and M1163 total through the life of the contract? Government Response: The estimated quantity to be purchased based on the current budget is approximately 6.3 million for both M1162 and M1163 cartridges, however please note the capacity requirements under paragraph 6 of the submission information. Any resulting RFP will include comparable quantities in order to allow the Army to surge production in the event of a conflict. (End Amendment One)..................... 300 and .338 Norma Magnum (NM)Market Survey DESCRIPTION: The United States (U.S.) Army Contracting Command, New Jersey (ACC-NJ) on behalf of the Project Manager for Maneuver Ammunition Systems (PM MAS) is seeking to identify potential sources for the manufacture and delivery of.300 Norma Magnum (NM), M1163, Ball Ammunition, Department of Defense Identification Code (DODIC): AC33 and .338 NM, M1162, Armor Piercing (AP) Ammunition, DODIC: AC32. Each DODIC will be fired from the Mk22 Precision Sniper Rifle. SPECIFICATIONS: The .300 NM Ball and the .338 NM AP cartridges will be procured to a U.S. Government Owned Technical Data Package (TDP). In addition, the cartridges must meet the requirements included in the Detailed Specifications for M1162 (MIL-DTL-32619) and M1163 (MIL-DTL-32618). TDP Upper-level drawings and Detailed Specifications may be provided upon request. The TDP Upper-level drawings are Distribution Statement A. Distribution A means distribution is authorized for public release. The Detailed Specifications are Distribution Statement D. Distribution D means distribution is authorized to the Department of Defense (DoD) and U.S. DoD contractors only (Critical Technology). The TDP and Detailed Specifications contain technical data whose export is restricted by the Arms Export Control Act (Sec 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate only in accordance with provisions of DoD Directive 5230.25 and DoD Instruction 2040.02. PLANNED ACQUISITION: The U.S. Government is contemplating award of a single Firm Fixed Price Indefinite Delivery Indefinite Quantity contract to fulfill Fiscal Year (FY) 27-32 requirements. The estimated quantity to be purchased is approximately 6.3 million M1162 and M1163 cartridges. Initial delivery is required 540 calendar days after award if First Article Test (FAT) is required, and 270 calendar days after award if FAT is not required. Sources interested in supplying this precision ammunition should adequately describe their experience in small caliber production and testing, annual production capacity, and ability to build to the Detailed Specifications: MIL-DTL-32619 and MIL-DTL-32618, and their respective TDPs. SUBMISSION INFORMATION: Responses shall be submitted electronically via e-mail to: david.e.schutzer.civ@army.mil, no later than 3:00pm Eastern on 17 February 2025. Offerors are instructed to include .300 and .338 NM as the subject of their response. Interested companies should respond by providing the U.S. Government the following information:1) Name of company and Commercial and Government Entity (CAGE) Code;(2) Point of Contact name, telephone number and e-mail address;(3) Company address;(4) Business type/size information; If a small business, please indicate any applicable socio-economic status such as: Small Disadvantaged Business (SDB), Service Disabled Veteran-Owned Small Business (SDVOSB), 8(a), HUB Zone, etc.(5) Identification of interest in this opportunity as a prime or subcontractor;(6) (a) A detailed description of the companys manufacturing, inspection, and testing capabilities, facilities, production equipment and status, personnel, and past commercial and United States Government manufacturing experience with .300 and .338 NM or similar precision cartridges; (b) a timeline to begin production, not to exceed 180 calendar days after contract award; (c) monthly and annual production capacities with assumptions about number of shifts and any other production factors that may affect monthly capacities with evidence of proven monthly production quantities of 170,000 each M1163 cartridges and 40,000 each M1162 cartridges; (d) minimum order quantity required (if applicable); (e) manufacturing lead time for each item listed (schedule shall include testing against MIL-DTL-32619 and MIL-DTL-32618, if not already performed); (f) a brief summary of possible partnering/teaming arrangements; (g) sketches, drawings, specifications, brochures and current estimated unit cost per million; (h) sources shall submit an outline of their plans and schedule to verify the design in addition to any contractor performed testing results and data to support claims that the design will conform to MIL-DTL-32619 and MIL-DTL-32618 requirements. Please identify any Proprietary information submitted. A respondent to this survey must have the majority of the skills and facilities that are required to manufacture this item. If a respondent does not have these resources (technical, manufacturing, personnel, etc.) available, then it must demonstrate its ability to obtain them in a reasonable time period. If a respondent chooses to utilize the services of sub-tier vendors or subcontractors, those vendors or subcontractors must also meet the same criteria as the prime contractor. The Upper-level drawing can be provided upon request to the Point of Contact listed above. Detailed Specification requests shall be submitted in writing using AMSTA-AR Form 1350 Technical Data Request Questionnaire (attached) along with a signed DD 2345 Military Critical Technical Data Agreement form and a fully executed Non-Disclosure and Non-Use Agreement (attached). Offerors must be registered with the U.S./Canada Joint Certification Office to obtain a copy of the Detailed Specifications. (See www.dlis.dla.mil/jcp/ for instructions and information). Offerors should submit their certification via DD Form 2345 or register immediately. To provide the data to foreign subcontractors, offerors must apply for an export license. An offerors delay in applying for DD 2345 certification or an export license will not be a basis to extend the closing date of any future request for proposal. Offerors must be able to receive, handle, and properly store Controlled Unclassified Information (CUI). DISCLAIMER: This market survey is for information and planning purposes only. The Government does not intend to award a contract based on this market survey. Participation in this effort is strictly voluntary and any of the information stated above is subject to change. The Government reserves the right to use any non-proprietary information in any resultant solicitation(s). Proprietary information should be marked as such. Please be advised that the Government will not pay for any information submitted under this announcement and that all information is to be submitted at no cost or obligation to the Government. The Government reserves the right to reject, in whole or in part, any private sector input as a result of this market survey. THIS IS NOT A SOLICITATION AND DOES NOT OBLIGATE THE GOVERNMENT TO ISSUE A SOLICITATION.
-Market Research02/17/2026
SOURCES SOUGHT NOTICE/ REQUEST FOR INFORMATION Devens MA- Devens RFTA- Graded Road Base/ Screened Loam/ Trap Stone- Supply This Request for Information (RFI) is issued solely for information and planning purposes and shall not be misconstrued as a Request for Quote (RFQ) nor does it constitute a commitment by the Government. All information submitted in response to this announcement is voluntary; the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government. Not responding to this RFI does not preclude participation in any future RFQ, if any is issued. The U.S. Army Contracting Command – Rock Island- Fort Dix- is seeking potential sources for a 12-month Blanket Purchase Agreement (BPA) to provide on-call delivery of Bulk ITAM Materials (Graded Road Base, Screened Loam, and Trap Stone) to South Post Fort Devens, MA (DRFTA). Additional details of this project can be found in the draft Materials List, Performance Work Statement (PWS), and technical specifications which are also attached. Responses should address the following items: (1) Address any concerns or unclear information within the bulk materials delivery requirement, including the standard three (3) business days delivery notice. (2) Provide a capability statement for the particulars of this effort, including confirmation of capability to supply all three (3) materials- not necessarily all at once- in the estimated quantities and in strict accordance with MassDOT Standard Specifications Division III (M2.01.7): - 3/4" Graded Road Base (Estimated 2,500 Tons) - Screened Loam, screened to 1/2" maximum particle size (Estimated 500 Cubic Yards) - 1-1/2" Trap Stone (Estimated 500 Tons) (3) Confirm that certified scale weight slips (scale tickets) will accompany each truckload at the time of delivery to verify weight, and that delivery drivers can comply with the South Post access requirement to check in daily at Range Control (1 Jackson Road, Lancaster, MA) prior to starting deliveries. (4) Provide your organization's name, address, email address, website address, phone number, and a good point of contact to reach. (5) Provide a statement indicating your company profile (office/quarry location(s), CAGE Code, UEI, etc.) and current business size/socioeconomic status (SDVOSB, 8a, WOSB, HubZone, etc.) under NAICS Code 212321 "Construction Sand and Gravel Mining" (500-employee size standard). Please include a few brief examples of similar bulk aggregate deliveries your company has performed in the past for federal, state, or municipal activities. Responses to this RFI shall be submitted by email directly to Contract Specialist, Michael Romano at michael.romano2.civ@army.mil. Questions shall be submitted in writing via email. Any questions may be directed to Michael Romano, the point of contact listed above.
-Market Research11/16/2027
The US Army Corps of Engineers, New York District (NYD) intends to issue a solicitation package seeking to award one Indefinite Delivery Indefinite Quantity (IDIQ) contract for the Chemical Testing of Dredged Material. The IDIQ contract would include the sampling and testing of dredged material proposed for placement at the Historic Area Remediation Site (HARS). HARS sampling and testing would adhere to the procedures, and their subsequent updates, as described in: 2016 US Army Corps of Engineers New York District/EPA Region 2 Guidance for Performing Tests on Dredged Material Proposed for Ocean Disposal (a.k.a. Regional Testing Manual) (http://www.nan.usace.army.mil/Portals/37/docs/regulatory/Formdoc/FINAL_NYD-R2_REGIONAL_TESTINGMANUAL-APRIL%202016.pdf) 1991 EPA/USACE, Evaluation of Dredged Material Proposed for Ocean Disposal (a.k.a. the Green Book) (https://www.epa.gov/sites/production/files/2015-10/documents/green_book.pdf). The IDIQ contract would also include the sampling and testing of dredged material proposed for upland placement. “Upland” sampling and testing would adhere to the procedures, and their subsequent updates, as described in: New Jersey Department of Environmental Protection (NJDEP) New Jersey Administrative Code (NJAC), Title 7, Chapters 9 and 26 (a.k.a. ‘NJAC 7’) (https://dep.nj.gov/rules/current-rules-and-regulations/) New York State Department of Environmental Conservation (NYSDEC) manual, entitled “Technical & Operational Guidance Series (TOGS) 5.1.9 In-Water and Riparian Management of Sediment and Dredged Material” (November 2004) (a.k.a. ‘TOGS 5.1.9’) (https://www.dec.ny.gov/docs/water_pdf/togs519.pdf) New York State Department of Environmental Conservation, New York Codes, Rules and Regulations (NYCRR), Title 6, Part 375 (December 2025) (a.k.a. ‘6 NYCRR Part 375’) (https://dec.ny.gov/sites/default/files/2025-12/6nycrrpart375final.pdf). Other state procedures may also be requested and would be coordinated between NYD and the contractor to determine capabilities. Additional work under this contract will include analyses of sediment, tissue, and water and may include environmental DNA/metagenomic analyses related to HARS monitoring in accordance with the following document and any subsequent updates: U.S. Army Corps of Engineers (USACE) New York District and Environmental Protection Agency (EPA) Region 2, Site Management and Monitoring Plan for Historic Area Remediation Site (HARS) (July 2020). Task orders would include all or some of the following: sediment and water collection (on Contractor-supplied ship) handling, processing and shipping of samples physical and chemical analyses quality assurance (QA) and quality control (QC) procedures, and necessary corrective actions. For each task order, the contractor would provide reports containing the sampling logs, all testing results and QA/QC information in the format required by NYD, EPA – Region 2, and/or state agencies. In addition to sampling and testing for ocean placement, NYD also requires that contractors be capable of performing testing procedures such as the Synthetic Precipitation Leaching Procedure (SPLP), the Toxicity Characteristic Leaching Procedure (TCLP), and the Modified Elutriate Test (MET), which are required for upland placement of dredged material in the states of New York and New Jersey. Prior to sampling and testing, a Work/Quality Assurance (QA) Plan and an Accident Prevention Plan (APP) would need to be prepared by the contractor and approved by NYD. A Work/QA Plan must include: descriptions of all technical procedures for field sampling, laboratory analyses (e.g. biological, physical) for HARS and upland testing, data reduction and validation, and reporting clearly written standard operating procedures (SOP) for all field, experimental and analytical procedures clearly defined QA objectives that are consistent with the regulations (e.g. Regional Testing Manual, Green Book, NJAC 7, TOGS 5.1.9, and 6 NYCRR Part 375) and if applicable, permit application mechanisms for conducting performance and systems audits during the course of the field laboratory work procedures for detecting problems with sampling and analytical work, and implementation of corrective actions in a timely manner. All sampling would be performed within the Port of New York & New Jersey, all Federal Navigation Channels within New York District, the length of the Hudson River, in the Atlantic Ocean at the Historic Area Remediation Site and its Mud Dump Reference Site. “New Work or Harbor Deepening” projects may be proposed and coordinated between NYD and the contractor. A detailed description of work required for these contracts will be provided in its entirety upon issuance of the complete solicitation. Prior to issuance of the solicitation, it is highly recommended that interested parties read the required regulations (e.g. Regional Testing Manual, Green Book, NJAC 7, TOGS 5.1.9, and 6 NYCRR Part 375) in order to obtain a thorough understanding of the work required by the NYD and EPA – Region 2 dredged material testing program. The Period of Performance will be five (5) years from the issuance of the Notice to Proceed (NTP). The contract magnitude will be up to $10,000,000.00 for five (5) years – up to $2,000,000.00 each year. One contract will be awarded on an Unrestricted Full and Open Competition basis to the lowest bidder who has, within the last 18 months, demonstrated their capability of performing the program’s work to EPA – Region 2. A bidder can prove their capability through one of the following: the bidder has received, within the last 18 months from EPA – Region 2, documentation stating that the laboratory has submitted data that is fully acceptable or acceptable with qualification; or the bidder has satisfied the Demonstration of Capability (DOC) requirements for the NYD and EPA – Region 2 dredged material testing program. The North American Industry Classification System (NAICS) code is 541380. The business size standard is $25,500,000.
-Pre-Solicitation11/23/2026
The U.S. Army Contracting Command - Rock Island, Rock Island, Illinois, has awarded 11 Indefinite-Delivery, Indefinite-Quantity Multiple-Award Task Order Contracts (MATOCs) resulting from Solicitation W519TC26RA020 (including Amendments 0001 through 0007). Under this five-year (1,826 calendar days) base ordering period MATOC, the awarded contractors will compete for task orders to execute design, build, facility modernization, and commissioning projects in support of the seven (7) Government-Owned, Contractor-Operated Army Ammunition Plants: Holston Army Ammunition Plant (Kingsport, TN); Iowa Army Ammunition Plant (Middletown, IA); Lake City Army Ammunition Plant (Independence, MO); Milan Army Ammunition Plant (Milan, TN); Quad City Cartridge Case Facility (Rock Island, IL); Radford Army Ammunition Plant (Radford, VA); and Scranton Army Ammunition Plant (Scranton, PA). Summary of all 11 MATOC pool awardees from the above-referenced solicitation: Note: Each contract award under this MATOC pool is publicized via a separate SAM.gov Award Notice; the complete list of awarded contractors is provided below in the attachment section of this Award Notice. Actual places of performance under this Multiple Award Task Order Contract (MATOC) will be designated on a task-order-by-task-order basis as requirements arise.
-AwardedOpen
The U.S. Army Contracting Command - Rock Island, Rock Island, Illinois, has awarded 11 Indefinite-Delivery, Indefinite-Quantity Multiple-Award Task Order Contracts (MATOCs) resulting from Solicitation W519TC26RA020 (including Amendments 0001 through 0007). Under this five-year (1,826 calendar days) base ordering period MATOC, the awarded contractors will compete for task orders to execute design, build, facility modernization, and commissioning projects in support of the seven (7) Government-Owned, Contractor-Operated Army Ammunition Plants: Holston Army Ammunition Plant (Kingsport, TN); Iowa Army Ammunition Plant (Middletown, IA); Lake City Army Ammunition Plant (Independence, MO); Milan Army Ammunition Plant (Milan, TN); Quad City Cartridge Case Facility (Rock Island, IL); Radford Army Ammunition Plant (Radford, VA); and Scranton Army Ammunition Plant (Scranton, PA). Summary of all 11 MATOC pool awardees from the above-referenced solicitation: Note: Each contract award under this MATOC pool is publicized via a separate SAM.gov Award Notice; the complete list of awarded contractors is provided below in the attachment section of this Award Notice. Actual places of performance under this Multiple Award Task Order Contract (MATOC) will be designated on a task-order-by-task-order basis as requirements arise.
-AwardedOpen

Additional Details

Solicitation Number

W15QKN-26-D-A102

Archive Date

Sep 9, 2026

Place of Performance Country

UNITED KINGDOM

Office Address

PICATINNY ARSENAL, NJ, 07806-5000