Manufacture of M776 155mm Cannon Tubes
Archived on January 29, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM EST
- Posted
- December 15, 2025
- Notice type
- Sources Sought
- NAICS
- 332111: Iron and Steel Forging
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- AMC.ACC.ACC-CTRS.ACC-NJ.W6QK ACC-PICA
- Last updated
- Nov 5, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- W15QKN-26-X-1B03
- Notice ID
- 1864ee3b4f3c4586ae46092e03287c7d
Description
Purpose: The Army Contracting Command (ACC) New Jersey, Picatinny Arsenal, NJ 07806-5000 is conducting a Market Survey on behalf of the Joint Program Executive Office Armaments and Ammunition (JPEO A&A), the Project Manager Combat Ammunition Systems (PM CAS) has a need to identify potential sources capable of manufacturing the M776 155mm cannon tube domestically in the specific quantities and lead time as annotated below. The purpose of this market research is to obtain current information on the capability of additional sources to manufacture M776 155mm Cannon Tubes.
Description: The 155mm M776 Cannon tube is a component of the 155mm M777A2 Towed Howitzer, which is a direct-support cannon fire support system for the Army and must be built to the United States Technical Data specifications. This Sources Sought is for planning purposes only and shall not be construed as a solicitation or an obligation on the part of the US Government.
All interested vendors are requested to provide a written response summarizing the following information:
1. Name of company, address, telephone number, email address, technical point of contact, CAGE code and business size information (please specify as either a Large Business, Foreign-Owned Business, Small Business, Small Disadvantaged Business, 8(a) concern, Woman-Owned Small Business, Historically Underutilized Business Zone concern, Veteran-Owned Small Business, or Service-Disabled Small Business).
2. A description of the vendor’s manufacturing experience of the M776 Cannon Tube or similar products within the last ten (10) years to include past performance.
3. A description of the vendor’s existing 155mm cannon production process to include all major manufacturing stages and the operations/equipment utilized for each.
4. A description of the vendors current maximum monthly capacity to produce 155mm cannon tubes.
5. A description of the vendors capability and projected available capacity to produce 155mm cannon tubes no later than (NLT) 36 months from the date of this sources sought. However, the USG has a need for an additional cannon source as soon as possible and schedule will be a factor into the overall risk rating.
6. A description of the domestic facilities, equipment, machines and tooling required (if any) to increase the available capacity to produce 155mm cannon tubes to 10 tubes per month NLT 36 months from the date of this sources sought. Description should include NOT-TO-EXCEED ROM for all required purchases and include NOT-TO-EXCEED ROM for initial production quantity of 40 cannon tubes.
7. A detailed description of the vendor’s cannon tube source material grade, vendor(s) and processing (i.e. steel making, forging/preforms, guide bore, heat treat…etc).
8. A detailed description of the vendors bore and outside diameter cold working capabilities to include autofrettage.
9. A detailed description of the vendor’s turning boring and milling capabilities along with the size capacity or each (length, weight, outer/inner diameters).
10. A detailed description of the vendor’s rifling capabilities to include a general description of the rifling configuration (i.e. number of lands, grooves & twist).
11. A detailed description of the vendor or subcontractor coating capabilities for chrome bore coatings on a steel tube up to 30 ft long and up to 5000 pounds in weight.
12. A detailed description of the vendor’s OD protective coating and painting capabilities.
All companies interested in this notice must be registered in System for Award Management (SAM).
This market survey is for informational and planning purposes and shall NOT be construed as a Request for Proposal (RFP). Technical Data may be provided upon request for information only. To receive the technical data, contractors are required to submit a signed and completed DD Form 2345-Militarily Critical Technical Data Agreement; AMSTA-AR Form 1350-Technical Data Request Questionnaire; and Non-Disclosure Agreement (NDA).
If the Technical Data for this effort is provided, a Certificate of Destruction form shall be completed and submitted by any contractor in receipt of the Technical Data, upon this source sought notice closing.
All information is to be submitted at no cost or obligation to the Government. If a formal solicitation is generated at a later date, a solicitation notice will be published. Please identify any proprietary information submitted. All information provided will not be returned and will be held in confidential status.
All market information sought in this notification must be provided within 30 days of this notice by electronic mail only at no cost to the Government. The points of contact for this requirement are Megan Ross via email megan.j.ross.civ@army.mil and/or Peter Snedeker peter.t.snedeker.civ@army.mil, ACC-NJ (Division: CCNJ-IC), Bldg.10, Picatinny Arsenal, NJ 07806-5000. All inquiries shall be made via email only. Telephone inquiries will not be accepted.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
- 3Version 3Sources SoughtArchivedCurrent
Manufacture of M776 155mm Cannon Tubes
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This contract or purchase order is hereby modified in accordance with DoD Class Deviation 2025-O0003, Restoring Merit-Based Opportunity in Federal Contracts, which implements Executive Order (E.O.) 14173, Ending Illegal Discrimination and Restoring Merit-Based Opportunity, and E.O. 14168, Defending Women from Gender Ideology Extremism and Restoring Biological Truth to the Federal Government and in accordance with Class Deviation 2025-O0004, Revocation of Executive Order on Sustainability which implements section 2(rr) of E.O. 14148, Initial Rescissions of Harmful Executive Orders and Actions, of January 20, 2025 (see 90 FR 8237), which revoked E.O. 14057, Catalyzing Clean Energy Industries and Jobs Through Federal Sustainability, of December 8, 2021. | 56% | Awarded | Open |
Red River Army Depot Rubber Products has a requirement to purchase T-142 Track Shoe Block P/N: 11645128 Rev C in the following estimated quantities per fiscal year: FY26 – 24,000 each Receive 2,400 Shoe blocks by November 2nd. Receive 3,600 Shoe blocks by December 2nd. Receive 3,600 Shoe blocks by January 5th. Receive 3,600 Shoe blocks by February 2nd. Receive 3,600 Shoe blocks by March 2nd. Receive 3,600 Shoe blocks by April 2nd. Receive 3,600 Shoe blocks by May 2nd. T-142 Track Shoe Block, part number 11645128 Rev C, produced to the specifications of drawing 11645128 Rev C, in accordance with Quality Assurance Requirement (QAP) 11645128, accompanied with a Certificate of Conformance (CoC). Early delivery is acceptable at no additional cost to the Government. | 54% | Pre-Solicitation | 04/14/2029 |
**SOLICITATION HAS BEEN UPDATED ON 11/4/2026- PLEASE SEE ATTACHED AMENDMENT TITLED W911PT27QA009-0001. THE RESPONSE DATE WAS EXTENDED TO 11-18-2026 AT 4:00PM EASTERN. THE QUANTITY WAS ALSO UPDATED AND INCREASED TO A TOTAL OF 113 EACH.** *MUST HAVE ACTIVE SAM AND BE CERTIFIED IN THE JOINT CERTIFICATION PROGRAM TO RETREIVE DRAWINGS* **DRAWINGS MUST BE REQUESTED THROUGH THE SAM SITE, JCP CERTIFICATIONS WILL BE VALIDATED PRIOR TO RELEASING DRAWINGS. YOU MUST ALSO BE ACTIVE ON THE SAM.GOV WEBSITE TO BE ELIGIBLE FOR AWARD* EMAIL ANY QUESTIONS- NO PHONE INQUIRIES. 113 EACH (FIRST ARTICLE REQUIRED OR WAIVED): Breechblock Forging (Rough Machined), per drawing number 12591138, Rev B, for 105mm M20. To include contract data prepared and delivered in accordance with CONTRACT DATA REQUIREMENTS LIST (DD FORM 1423) which is attached hereto as EXHIBIT A; along with general data drawings attachment A. EMAIL ANY QUESTIONS- NO PHONE INQUIRIES. | 54% | Solicitation | 11/18/2026 |
The U.S. Army Contracting Command - New Jersey, on behalf of the office of the Project Manager, Combat Ammunition Systems (PM CAS), intends to issue a Request for Proposal (RFP) for Primer Feed Mechanisms (PFMs) in support of the M777A2 155mm Howitzer. The PFM Assembly consists of three assemblies: (1) Body Assembly, (2) Tray Assembly, and (3) Magazine Assembly, and each assembly consists of several sub-assemblies. In addition to the PFM Assembly, the Dog Coupler Assembly (legacy), Reinforced Dog Coupler Assembly, Magazine Primer Stop, Injector Arm Assembly, Firing Pin, Cross Pin, and Inert Primers are considered down parts to the overarching PFM assemblies.Specifications: The contractor shall manufacture, test, and deliver Primer Feed Mechanism (PFM) assemblies and associated components for the M777A2 Lightweight 155mm Howitzer to support U.S. or Foreign Military Sales customers. Specific detailed packaging instructions will be included on the delivery order on a case-by-case basis.Planned Acquisition: The Government intends to award a single, five-year Indefinite Delivery Indefinite Quantity (IDIQ) contract with Firm Fixed Price (FFP) delivery orders with five one-year Ordering Periods (OPs) from Fiscal Year (FY) 27-32. The production contract award will be based upon Full and Open Competition as a 100% Small Business Set Aside, in accordance with FAR 19.5.The following Ordering Periods are anticipated:OP 1: 12 months from date of awardOP 2: 12 months from the end of OP 1OP 3: 12 months from the end of OP 2OP 4: 12 months from the end of OP 3OP 5: 12 months from the end of OP 4. **This Solicitation has been re-opened with Amendment 0006. Please refer to the Amendment for further information.** | 47% | Solicitation | 12/11/2026 |
68 Each - STOP, INTERLOCKING PER DRAWING 11580157 REV BTo include contract data prepared and delivered in accordance with CONTRACT DATA REQUIREMENTS LIST (DD FORM 1423) which is attached hereto as EXHIBIT A. Along with General Data Drawings ATTACHMENT A.**INSPECTION REQUIRED** | 44% | Solicitation | 11/25/2026 |
Additional Details
Solicitation Number
W15QKN-26-X-1B03
Archive Date
Jan 29, 2026
Office Address
PICATINNY ARSENAL, NJ, 07806-5000