10--Mortar Weapons Component IDIQ - Part 2 DRAFT Sections A - K
Overview
- Response deadline
- 7:00 AM UTC+02:00
- Posted
- July 15, 2015
- Notice type
- Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W6QK ACC-PICA
- Place of performance
- ACC - New Jersey Center for Contracting and Commerce, Building 10 Phipps RD Picatinny Arsenal NJ 07806-5000 US
- PSC
- 10: WEAPONS
- Last updated
- Dec 5, 2025
Identifiers
- Solicitation number
- W15QKN15R0014
- Notice ID
- 8bc9ecb0a206d0a0291c9009b0b6d7dc
Description
The Mortar Weapon Component Request for Proposal (RFP), W15QKN-15-R-0014, shall be released in three (3) Parts. The Part 2 release is as follows: 1) Part 2 will consist of DRAFT versions of all Sections A through K of the uniform contract format. This includes Sections B and C, which remain unchanged from Part 1 released on 11 February 2015. All attachments found under Section J of the DRAFT Part 2 Section A through K are attached in this Federal Business Opportunities (FBO) announcement. Part 2 will provide offerors with an opportunity to review and become familiar with all necessary Clauses, Provisions, and Attachments to be included in Sections A through K. 2) To obtain a copy of the Technical Data Package (TDP), offerors will be required to submit the following forms: Military Critical Technical Data Agreement (DD Form 2345) (Attachment 0005), Non-Disclosure Agreement (NDA) (Attachment 0003), an AMSTA-AR 1350 (Attachment 0004), and the SF-LLL (Attachment 0008), which are attached in this Federal Business Opportunities (FBO) announcement. These forms and documents can be sent via e-mail to the Point of Contract/Contract Specialist listed in Section A. Once completed and returned, it will then be determined by the Government to give access for the Technical Data Packages (TDPs) in DRAFT form to the offerors. The DRAFT TDPs will be located under the (Packages) tab of this FBO announcement. Note: Please be advised that the Technical Data Packages (TDP) for the M252 81mm BII and M252 81mm DS Tools are now available for release at this time. 3) Part 3 is still expected to be released within approximately 30 calendar days (if not sooner) and will constitute the complete and final version of the RFP. Part 3 will include Sections L and M, which shall provide all necessary instructions for submitting a proposal to the Government and information as to how that proposal will be evaluated. Again, following the release of Part 3, the Government reserves the right to cancel, edit, or amend any RFP Section prior to the final date for submission of proposals. The Government is not soliciting any proposal submissions in response to the DRAFT Sections of the RFP that will be released with Parts 1 and 2. The final date for submission of proposals will be included in the Final RFP released as Part 3. The Point of Contact for this notification and any questions may be directed to Mr. Thomas Howes via E-mail ONLY: thomas.d.howes2.civ@mail.mil. TELEPHONE INQUIRIES WILL NOT BE ACCEPTED.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Thomas Howes, 973-724-2962 ACC - New Jersey
Documents
No documents available.
Lifecycle
Solicitation:
W15QKN15R0014- Pre-Solicitation
- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- 35×Pre-SolicitationFeb 11, 2015
10--Mortar Weapons Component IDIQ - Part 2 DRAFT Sections A - K
- SolicitationCurrentJul 15, 2015
10--Mortar Weapons Component IDIQ - Part 2 DRAFT Sections A - K
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Additional Details
Solicitation Number
W15QKN15R0014
Archive Date
Jul 10, 2019