Notice ID: 74fb297b5342bf4a42345304686a1e81Award NoticeAwarded
High Gravity (High-G) Accelerometers Synopsis
Awarded on September 27, 2016. Full description on SAM.gov.
Awarded tounder W15QKN-16-D-0096 (source: SAM.gov award notice)• $7.1M
Overview
- Posted
- September 28, 2016
- Notice type
- Award Notice
- NAICS
- 334519: Other Measuring and Controlling Device Manufacturing
- Agency
- Department of War
Notice details
- Place of performance
- ACC - New Jersey Center for Contracting and Commerce, Building 10 Phipps RD Picatinny Arsenal NJ 07806-5000 US
- PSC
- 52: MEASURING TOOLS
- Last updated
- Oct 6, 2025
- Award date
- Sep 27, 2016
- Award amount (SAM.gov award notice)
- $7.1M
Identifiers
- Solicitation number
- W15QKN15R0023
- Notice ID
- 74fb297b5342bf4a42345304686a1e81
- Award number (PIID)
- W15QKN-16-D-0096
Description
This contract action was accomplished using other than competitive procedures because there is only one responsible source due to a unique capability provided, and no other supplies or services will satisfy agency requirements (FAR 6.302-1). See posted J&A for further information. The U.S. Army Contracting Command - New Jersey (ACC-NJ) , Picatinny Arsenal, New Jersey 07806-5000 awarded Contract W15QKN-16-D-0096 to Meggitt (Orange County), Inc., 14600 Myford Rd., Irvine, CA 92606-1005. Contract W15QKN-16-D-0096 is to procure High Gravity Accelerometers for all Munitions and Excalibur Testing Programs. The maximum value of this Indefinite Delivery Indefinite Quantity (IDIQ) contract is $7,125,000.00. Point of Contact (POC) for this action is Charlotte Sylvain, ACC-NJ-CA, Bldg. 10, Picatinny Arsenal, NJ 07806-5000; email charlotte.a.sylvain.civ@mail.mil.
Award Overview
Award Number
W15QKN-16-D-0096
Award Amount (SAM.gov award notice)
$7.1M
Award Date
Sep 27, 2016
Awardee
Awardee UEI
CP1LPEUC1YH5
Original Solicitation
Notice ID: 74fb297b5342bf4a42345304686a1e81
Posted Date: Sep 28, 2016
Original Response Deadline: Not specified
Task Orders Under This IDV
Top 10 by total obligated
- $736.5KSigned Sep 28, 2021
- $736.5KSigned Sep 24, 2019
- $656.6KSigned Oct 18, 2024
- $335.8KSigned Oct 12, 2021
- $335.8KSigned Apr 25, 2019
- $123.1KSigned Aug 28, 2018
- $111.8KSigned Nov 17, 2016
- $64.1KSigned Jan 16, 2018
- $43.0KSigned Jul 27, 2017
- $21.3KSigned Sep 28, 2016
More From This Vendor
Top 5 most recent
- $5.6KSigned Sep 19, 2025
Contacts
Contracting Officer
Primary Contact
Documents
Showing 1 of 1 items
Document | Source | Agency | Posted Date | File Size | Actions | |
|---|---|---|---|---|---|---|
| Solicitation | Department of War | Sep 28, 2016 | - |
Lifecycle
Solicitation:
W15QKN15R0023- Pre-Solicitation
- Solicitation
- Awarded
This opportunity has been awarded.
- 2×Pre-SolicitationJun 10, 2015
13--High Gravity (High-G) Accelerometers Synopsis
- SolicitationSep 28, 2016
13--High Gravity (High-G) Accelerometers Synopsis
- AwardedCurrentSep 28, 2016
High Gravity (High-G) Accelerometers Synopsis
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
THIS IS A NOTICE OF INTENT TO AWARD A SOLE SOURCE CONTRACT AND IS NOT A REQUEST FOR COMPETITIVE QUOTES. High Temperature Furnace and Grips The National Aeronautics and Space Administration (NASA), Glenn Research Center (GRC) has a requirement for a 1500°C high temperature furnace and fully reversed fatigue rated grips to be used for testing of metallic and composite samples on an existing MTS 810 servo-hydraulic test frame. Specifically, the furnace and grips must meet the minimum requirements: One 1500°C High Temperature Furnace and specifications consisting of the following: Three zone hybrid furnace: MoSi2 center zone and kanthal top and bottom zones Must be capable of achieving specimen temperatures from 700°C to 1500°C Must heat to 1500°C from room temperature in less than 3 hours Clamshell design that opens wide to maximize accessibility for specimen and grip installation Must easily return to test (closed) position to maintain repeatability between tests Must be designed to accommodate MTS and other high-temperature axial extensometers Must have dual extensometer ports with interchangeable inserts Must have dual thermocouple ports with interchangeable inserts Ridid column mounting design to minimize vibration induced disturbances Temperature controller Must include furnace mounting hardware to existing MTS 810 load frame with 2.5” diameter columns with a center to center column spacing of 23.5” 1500°C High Temperature Grips and specifications consisting of the following: Must be engineered to work with 1500°C furnace to enable precise control of thermal gradients Thermal shielding and integral cooling must enable grip to work at temperatures to 1500°C and reduce overall thermal gradient while protecting the grip materials from excessive temperature (over 1000°C) enabling long life performance This grip must be provided with ceramic heat shields for improved durability Allow for specimen temperatures up to 1500°C Less than 1% thermal gradient over the specimen gage length Rated at 25kN for round specimens Rated at 4-7kN for flat specimens Must maintain constant preload on specimen through test loading Must maintain accurate alignment and low bending strains Must achieve less than 5% bending strain on a representative test specimen Must include integrated grip over temperature protection Must include air colling assembly Must include water cooling assembly Must include flat specimen interfaces (includes chamber and piston rod): wedge set, high temp 0-.188 (0-4.77mm) Must include threaded round specimen interfaces (includes chamber and piston rod): ¼-28 and ½-20 threaded adapters Specimen geometry should have a max overall length of 150 mm with 28 mm threaded length at each end Must be capable of 5 Hz or more fully reversed loading Must interface with 1”-14 threads on existing MTS 810 load frame Includes one week on site installation and training. Delivery 9 months after receipt of order. NAICS is 334519. NASA intends to award a Firm-Fixed-Price sole source contract under the authority of FAR 6.302-1 – Only One Responsible Source to: MTS Systems Corporation, 14000 Technology Drive, Eden Prairie, MN 55344-2290 The Government intends to acquire a commercial item using FAR Part 12. Interested organizations may submit their capabilities statements to perform the effort electronically via email to Matthew Sivic at matthew.sivic@nasa.gov no later than 1:00 pm EST on November 22, 2026. The capabilities statement must be submitted in either Word or PDF and must contain clear and convincing evidence that competition for this requirement would be advantageous to the Government. This notice does not constitute a solicitation and any cost associated with preparation and submission of data or any other cost incurred in response to this announcement are the sole responsibility of the respondent and will not be reimbursed by the Government. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this acquisition on a competitive basis. A determination by the Government not to compete this acquisition on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the Government. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at: https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf | 62% | Special Notice | 11/22/2026 |
The Army Contracting Command – Detroit Arsenal (ACC-DTA) is issuing this Request for Quotation (RFQ) for the procurement of the Carrier Assembly Reference. This solicitation, W912CH-26-Q-A072, will result in a Firm-Fixed Price (FFP) Contract, One-Time Buy with a 100% Option for the procurement of the following: Noun: Carrier Assembly Reference NSN: 6665-01-539-5590 Quantity: 660 Each (EA) Option Quantity: 660 EA First Article Test Report: Required There is an export controlled Technical Data Package (TDP) associated with this procurement, distribution code D, limiting access to the Department of War (DoW) and U.S. DoD contractors only. Please refer to Section C for additional information. Military preservation, packing, and marking are required and shall be accomplished in accordance with Section D, all applicable requirements of MIL-STD-2073-1, and the Special Packaging Instruction (SPI). Joint Certification Program (Export Control): You must be certified under the United States/Canada Joint Certification Program (JCP) to be granted access to the TDP for this solicitation. (https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/). When requesting access to this solicitation’s TDP, please submit your firm’s approved DD2345 to the Point of Contact of this posting for review and approval. The intended solicitation, and any amendments, will be issued electronically. The Government is under no obligation and is in fact unable to maintain a mailing list. Interested parties shall periodically access SAM.gov to obtain any amendments which may be issued. Failure to obtain any amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal nonresponsive and result in the rejection of the proposal. Please submit one copy of your offer, in accordance with Section A of the solicitation, to be considered for award. Proposals are due no later than Monday December 21, 2026 at 12:00 PM Eastern Standard Time (EST). All offers submitted in response to this solicitation shall be valid for a minimum of 90 calendar days following the offer due date. NOTICE: All contractors who provide goods/services to the Department of War (DoW) must be registered in the System for Award Management (SAM). All questions pertaining to this RFQ shall be directed in writing to: Jonice Green CONTRACT SPECIALIST, ARMY CONTRACTING COMMAND - DETROIT ARSENAL E-MAIL: jonice.d.green.civ@army.mil or Eboni Albert CONTRACT SPECIALIST, ARMY CONTRACTING COMMAND - DETROIT ARSENAL E-MAIL: eboni.q.albert.civ@army.mil | 46% | Solicitation | 12/21/2026 |
Request for Preproposals for Vehicle Integrated Platform Enhanced RADIAC (VIPER): Non-GM Alternative Sensor Prototype for Tracked Tactical Ground Vehicles This requirement will be handled through the procedures established in the Broad Other Transaction Authority Announcement (BOTAA) Supporting Other Transaction Authority Agreements for Prototype Development Efforts for the JPEO CBRND – Combating Weapons of Mass Destruction (“JPEO-CBRND CWMD BOTAA-24-01”). Please review the BOTAA announcement and submission requirements in full prior to submitting a Pre-Proposal. Ensure that your submission references “CWMD BOTAA-24-01 VIPER_27-TRACK." Link to BOTAA: https://sam.gov/workspace/contract/opp/2d04622b25364669857a6a61c576ade9/view Pre-proposals are due no later than 12:00 PM EST on December 10, 2026. The full request for pre-proposals is attached to this posting. | 46% | Pre-Solicitation | 12/10/2026 |
NOTICE OF INTENT TO SOLE SOURCE AND IS RESTRICTED TO SUPER SYSTEMS INC. CAGE: 3DYS7 / UEI: TK4EB1EKHDN3 Contractor Address: 7205 Edington DR, Cincinnati, Ohio, 45249-1064, United States Requirement: MAINTENANCE - ELECTRICAL PIT FURNANCE #37 SERVICE & Parts Upgrade Purpose: To have Super Systems Incorporated provide a complete electrical controls upgrade with Super System INC. proprietary controls and software to communicate with existing SKADA Super Data System already installed in Heat Treat Forge, for recording and monitoring purposes, flow rack upgrade, and an updated electrical drawing packet for Electrical Pit Furnace. *This is a notice of intent to sole source to Super Systems INC. due to proprietary control and OEM capability, which is restricted to Super Systems INC. only.* | 46% | Special Notice | 11/10/2026 |
The Meteorology Branch at White Sands Missile Range (WSMR) requires the procurement of a Scintillometer and required supplies which are fully detailed in the attached Product Description. If you are proposing an equivalent product, please provide adequate documentation supporting the salient characteristics which meet the requirement. | 46% | Combined Synopsis | 11/03/2026 |
Additional Details
Solicitation Number
W15QKN15R0023
Archive Date
Oct 12, 2016