GovChime
Notice ID: 737a0d009a27402c8e78d23a1137fccdSolicitation

MEDIUM CALIBER NON-RECURRING ENGINEERING (NRE) - AMENDMENT NO. 0001

Archived on November 25, 2020. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
4:30 PM UTC−05:00
Posted
October 29, 2020
Notice type
Solicitation
NAICS
332993: Ammunition (except Small Arms) Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W6QK ACC-PICA
Place of performance
Picatinny Arsenal, NJ, 07806
Last updated
Dec 4, 2025

Identifiers

Solicitation number
W15QKN20R0104
Notice ID
737a0d009a27402c8e78d23a1137fccd

Description

Amendment No. 0001 issued on October 28, 2020 is for the following: 1. Remove Labor Category Description "L. Clerical/Administrative" from Section B0001 Narrative. This labor category is not required and was included in the original solicitation in error. 2. Revise Section L0002 Narrative (Volume III, Paragraph 3.3, Section 3 - Subcontracts) to clarify the Government's requirement. 3. Revise an error found in the first paragraph of Attachment 0003 - Non-Disclosure and Non-Use Agreement NRE. 4. Document questions received from potential offerors and provide USG responses: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ The Army Contracting Command - New Jersey (CCNJ), on behalf of the Project Manager for Maneuver Ammunition Systems (PM-MAS), hereby issues a Request for Proposal (RFP) for Medium Caliber Non-Recurring Engineering (NRE). The purpose of the proposed requirement is for NRE Development, Manufacturing, Design and Testing Support that is interoperable with 20mm, 25mm, 30mm x 113mm, 30mm x 173mm, and 50mm weapon systems. This effort requires contractors to have the capability to manufacture and test prototype and production samples of mechanical and/or electronic components on an individual or sub-system/system basis. The Objectives are to assess enhanced lethality and accuracy technologies for legacy and future medium caliber ammunition components and improved production and manufacturing of standard cannon legacy ammunition and components, and other ammunition in the range of 20mm to 50mm. The proposed procurement action is anticipated to be awarded using Other Than Full and Open Competition in accordance with Federal Acquisition Regulation (FAR) 6.302-3, Industrial mobilization, engineering, development, or research capability; or expert services.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:W15QKN20R0104
  1. Pre-Solicitation
  2. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. Pre-SolicitationJul 1, 2020

    MEDIUM CALIBER NON-RECURRING ENGINEERING (NRE)

    Notice c29196afc7134230864916cc8ebcb944 on SAM.gov

  2. 2×
    SolicitationCurrentOct 9, 2020

    MEDIUM CALIBER NON-RECURRING ENGINEERING (NRE) - AMENDMENT NO. 0001

    Notice 737a0d009a27402c8e78d23a1137fccd on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
3-Nov-2026: Please be advised that the following has been updated/added to this notice: 1) W519TC-26-R-A061 indutsry Day Attendees List. 2) W519TC-26-R-A061 Industry Day Slides. 3) W519TC-26-R-A061 Industry Day Questions and Answers. Please review and any questions may be directed to the POCs below. 8-Sep-2026: Please be advised that the following has been updated/added to this notice: 1. Item 7 - Industry Day Registration Form - has been revised to Rev2. Please complete and submit this revision when registering for the FY27-32 120mm Tank Training Ammunition Industry Day. 2. Industry Day Information (attendance information updated): An Industry Day for the W519TC-26-R-A061 FY27-32 120MM Tank Training Ammunition program is scheduled for September 22 and 23, 2026. The in-person event will be hosted at PM-MAS, Picatinny Arsenal, Picatinny, NJ, and a Microsoft Teams link will be provided for virtual attendance. This event presents a vital opportunity for industry partners to gain a comprehensive understanding of the technical and logistical requirements for this upcoming multi-year program. In addition, details for the source selection process and timelines will also be provided. In-person attendance is strictly limited to five (5) personnel per eligible "prime" offeror team and two (2) personnel per eligible subcontractor. In order to be eligible, the offeror has to have an approved/active DD2345 to be eligible for attendance. Government representatives will host One-on-One sessions for prime offerors on September 22 and 23. These sessions are limited and will be allocated on a first-come, first-served basis. 1-Sep-2026: Please be advised that the following has been updated/added to this notice: 1) Item 7 - Industry Day Registration Form - has been revised to Rev1. Please complete and submit this revision when registering for the FY27-32 120mm Tank Training Ammunition Industry Day. 2) Item 8 - Industry Day Agenda - has been added to this notice. 3) The document "4A6A03MLM2_tdpl" found in the Draft TDP for the M1002 has been re-uploaded. The previous version of this document had issues with being opened. Original Notice: The U.S. Government (USG) is providing this draft Request for Proposal (RFP) W519TC-26-R-A061 information to give potential offerors advance notice of the upcoming Fiscal Years 2027-2032 (FY27-32) 120mm Tank Training Ammunition acquisition. A formal Request for Proposal (RFP) is anticipated to be published in the near future. Please Note: All documents within this posting are preliminary and subject to change. They are provided solely to assist potential offerors in the early planning stages of their proposal submissions. Questions and requests for clarification regarding these draft documents will be accepted until 15-Sep-2026. All inquiries should be directed to: Angela Calhoun, Contracting Officer: angela.m.calhoun.civ@army.mil and Dave Buennig, Contract Specialist: david.w.buennig.civ@army.mil The following draft documents are included in this posting: 1. Draft Technical Data Packages (TDPs) for M1002 and M865A1 Cartridges: Please follow the instructions in the Attachments section of this notice to access these documents. Note that these TDPs have been updated from the draft TDPs previously posted under Sources Sought W519TC-25-R-TANK. 2. Draft Statement of Work (SOW): Covers the FY27-32 120mm Tank Training Ammunition production. 3. Draft Supplier Table: Instructions for completion are included within the document itself. 4. Draft RFP Sections L and M: These draft sections will provide Proposal Submission Instructions, Evaluation Criteria, and Basis for Award. 5.Draft Price Matrix: Anticipated CLIN structure, quantity ranges, and pricing information. 6. Procurement Integrated Enterprise Environment (PIEE) Vendor Registration Guide: RFP W519TC-26-R-A061 is anticipated to be released through the PIEE Solicitation Module. In this guide, you will find step by step by step instructions for new users to self-register for a PIEE user account and existing users to add additional roles. Registration can be time-consuming. It is highly recommended that potential offerors begin this process as soon as possible. 7. Industry Day Information: An Industry Day for the W519TC-26-R-A061 FY27-32 120MM Tank Training Ammunition program is scheduled for September 22 and 23, 2026. The in-person event will be hosted at PM-MAS, Picatinny Arsenal, Picatinny, NJ, and a Microsoft Teams link will be provided for virtual attendance. This event presents a vital opportunity for industry partners to gain a comprehensive understanding of the technical and logistical requirements for this upcoming multi-year program. In addition, details for the source selection process and timelines will also be provided. Due to facility constraints, in-person attendance is strictly limited to five (5) personnel per eligible "prime" offeror team, inclusive of all teammates and subcontractors. In order to be eligible, the offeror has to have an approved/active DD2345 to be eligible for attendance. Government representatives will host One-on-One sessions on September 22 and 23. These sessions are limited and will be allocated on a first-come, first-served basis. Registration Instructions & Points of Contact (POC): To register for the Industry Day and request a One-on-One session, please submit your registration package via email to all of the following: Angela Calhoun, Contracting Officer: angela.m.calhoun.civ@army.mil Dave Buennig, Contract Specialist: david.w.buennig.civ@army.mil Kris Aguilar, Management Support Assistant, kristin.aguilar3.ctr@army.mil Required Registration Information: When submitting your request, you must provide the following details: Company Information: Company Name (Prime Offeror) and listed teammates/subcontractors. In Person Attendee Roster: Full Name, Job Title, Email Address, and Citizenship for each of the maximum five (5) attendees. See Registration Request Form Virtual Attendee Roster: At the request of the Prime – See Registration Request Form One-on-One Request: Please state whether your team is requesting a One-on-One session. Registration forms for the Industry Day must be completed and submitted before Noon Eastern Time 15-Sep-2026. PM-MAS will submit all Visitor Request Forms to the Picatinny Security Office for the Industry Day Event and will setup all MS Teams Virtual Links for those off-site attendees. Note: No foreign national visitor paperwork will be accepted. Foreign Nationals will NOT BE ALLOWED to participate In Person or Virtually for this Industry Day Event. 8. Picatinny Arsenal Access & Security Requirements To ensure a seamless entry process for the Industry Day, it is vital to communicate the strict security protocols of the military installation. Below are the key security details that should be added directly to the announcement. Upon entry to Picatinny Arsenal, Visitors must provide/follow the below: Primary Identification - All attendees must present a valid Common Access Card (CAC) or a REAL ID-compliant state driver's license/U.S. Passport. If a driver's license is marked "Not for Federal Identification," a secondary valid government photo ID is required. Vehicle Access - Drivers must present a valid driver's license, vehicle registration, and proof of insurance at the gate. Rental car agreements are acceptable but must be presented upon entry. Gate Processing and Vehicle Searches - Visitors without a DoD CAC card must process through the Visitor Control Center (VCC) at the Main Gate (Building 1136) for a rapid background check and pass issuance prior to driving through the main gate. Visitors must enter through the “Visitor Pass Lane Only” lane. All vehicles are subject to 100% search upon entry. Visitors will be required to provide visitor pass and valid ID to the Security Guard. Prohibited Items - Weapons, ammunition, illegal drugs, and alcohol are strictly prohibited on the installation. Note: Photography and recording devices (including professional cameras) are prohibited unless explicitly authorized. Smart Phones are allowed on Post but may not be used to photograph or record anything while on Post. Foreign National Vistors - Foreign Nationals are will not be allowed on post for this specific activity. If a Foreign National submits a registration form request for this Industry Day Event, it will be denied.
59%
Pre-Solicitation09/15/2026
This award is for a five-year Requirements production contract that allows for Firm-Fixed Price (FFP) and Cost Plus Fixed Fee (CPFF) Delivery Orders (DOs) for the 120mm, Advanced Multi-Purpose (AMP) M1147 High Explosive Multi-Purpose with Tracer (HEMP-T) Cartridges for US Army and Foreign Military Sales (FMS) customers, both known and unknown.
59%
AwardedOpen
The U.S Army Contracting Command-Rock Island at Picatinny, on behalf of the Department of War (DoW) Fuze Integrated Product Team (IPT) is seeking feedback from industry on Continental United States (CONUS) sources and information regarding the existing capability to manufacture Electronic Safe and Arm Devices (ESAD) fuzes for munitions, as well as Ignition Safety Devices (ISDs) for rocket motors. DISCLAIMER: THIS RFI IS FOR MARKET RESEARCH PURPOSES ONLY AND SHALL NOT BE CONSTRUED AS A REQUEST FOR PROPOSAL, NOR AS AN OBLIGATION ON THE PART OF THE GOVERNMENT. THE GOVERNMENT DOES NOT INTEND TO AWARD A CONTRACT ON THE BASIS OF THIS RFI OR REIMBURSE ANY CONTRACTORS FOR ANY INFORMATION OR ADMINISTRATIVE COSTS ASSOCIATED WITH RESPONDING TO THIS NOTIFICATION. PARTICIPATION IN THIS EFFORT IS STRICTLY VOLUNTARY AND ANY OF THE INFORMATION STATED ABOVE IS SUBJECT TO CHANGE. THE GOVERNMENT INTENDS TO USE THE INFORMATION RECEIVED TO DEVELOP A WHITEPAPER AND INVESTMENT STRATEGY TO SUPPORT THE SCALE-UP NECESSARY TO EXPAND AND SECURE THE DOMESTIC ELECTRONIC FUZING AND IGNITION SYSTEMS INDUSTRIAL BASE. THE GOVERNMENT RESERVES THE RIGHT TO USE ANY NON-PROPRIETARY INFORMATION IN ANY RESULTANT SOLICITATION(S). PROPRIETARY INFORMATION SHOULD BE MARKED AS SUCH. IF A FORMAL SOLICITATION IS GENERATED AT A LATER DATE, THE GOVERNMENT WILL PUBLISH A SOLICITATION NOTICE. DESCRIPTION: The Government is specifically seeking to understand the industrial base's capacity to scale production in response to emerging high-rate defense requirements. These include supporting Weaponized Unmanned Aircraft Systems (UAS) for Drone Dominance, Launched Effects (LE), Counter-UAS (cUAS) technologies, low-cost/high-rate systems, alongside the increased production demand for existing munition systems. To enable this scalability, the Government must identify critical manufacturing, testing, and component-level supply chain bottlenecks, specifically concerning high-voltage firing capacitors, solid-state high-voltage switches, and In-Line Initiators (ILI) to include Explosive Foil Initiators (EFIs) / Low Energy Exploding Foil Initiators (LEEFIs) / Exploding Foil Deflagrating Initiators (EFDIs). The PSC code is 1390 – Fuzes and Primers RESPONSE REQUIREMENTS: The U.S. Government is requesting information from all interested CONUS sources having relevant ESAD and ISD manufacturing, assembly, energetic loading/integration, and testing capabilities. Respondents shall describe their prior experience, existing facility capabilities, relevant equipment, and personnel. With respect to the Government’s interest in the above, to adequately assess capability, responses shall address the following specific requirements: Past Performance and Demonstrated Experience: Describe your company’s historical experience and proven capability in developing, manufacturing, assembling, and qualifying electronic fuzing systems (i.e. ESADs, ESAFs, etc.) and rocket motor ignition devices (ISDs, Arm & Fire Devices, etc.) over the past five (5) years. Specifically address: Deliveries and Programs: List specific types, nomenclatures, and physical form factors of ESADs and electronic ISDs delivered. Detail total annual quantities delivered, peak production rates achieved, and whether your company served as the Prime or Subcontractor. Manufacturing and Production Infrastructure: Describe demonstrated experience operating electronics manufacturing and assembly lines, including Surface Mount Technology (SMT), Printed Circuit Board (PCB) Assemblies, Electrostatic Discharge (ESD)-controlled cleanroom environments, and energetic integration bays. Qualification, Testing, and Compliance History: Detail past performance qualifying systems to military safety and performance standards. Identify major cost and schedule drivers, specifically contrasting automated versus manual testing procedures. Additionally, describe your environmental stress testing experience and how it aligns with the operational envelopes of low-cost platforms. Workforce Experience: Detail the baseline technical competencies and certifications (e.g., IPC-A-610, J-STD-001, energetic material handling) of your current workforce across touch labor, high-voltage analog electrical engineering, RF design, and test engineering. Future Capabilities, Surge Capacity, and Scalability: Detail your facility’s ability to scale manufacturing throughput, adopt automated production/inspection methods, expand engineering capacity, and overcome component supply bottlenecks to meet anticipated defense surge demands. Specifically address: Production Rates and Surge Capacity: State your facility's current minimum viable annual production rate (economic run rate) and absolute maximum surge capacity (assuming multi-shift operations). Provide a projected year-by-year production profile from Government Fiscal Year (GFY) October 2027 through GFY 2031, detailing ramp-up capacity to support: Weaponized UxS / Purpose Built Attritable Systems (PBAS) to support Drone Dominance Munitions Acceleration Council (MAC) requirements Launched Effects (LE), Counter-UAS (cUAS) interceptors, and other similar low-cost, high-rate systems. Component Supply Chain and Critical Bottlenecks: Identify lead times, cost drivers, sole/single-source dependencies, and/or End-of-Life (EOL)/Product Change Notices (PCN) across key ESAD/ISD component technologies such as High-Voltage Firing Capacitors, High-Voltage Switches, Explosive Foil Initiators (EFIs) / LEEFIs, Logic and Processing Devices (one-time programmable - OTP logic devices, microcontrollers, field-programmable gate arrays – FPGAs, etc. Detail mitigation strategies, domestic alternative sources, or government investments needed. Advanced Manufacturing, Automation, and Facility Expansion: Outline planned or required capital investments, facility expansions, or automated assembly cells needed to support high-rate surge. Detail current and planned implementations of flexible automation cells, automated in-line inspection (e.g., in-line digital X-ray, Automated Optical Inspection [AOI], 3D dimensioning), and automated fuze/tester architectures (e.g., high-throughput bench-level testing for safety critical functions). Workforce Recruitment and Scaling Plan: Provide an overview of recruitment, onboarding, and training roadmap to scale engineering and assembly labor for surge production. Include timed milestones, required training hours, measurable certification standards, and strategies to overcome regional labor shortages or cleared personnel constraints. Additionally, identify any systemic training shortcomings, instructional gaps, or critical hurdles to attracting and retaining qualified personnel for these specialized roles. Security, Controlled Unclassified Information (CUI), and Classified Handling: Confirm your company’s capability to handle, store, transmit, and process Controlled Unclassified Information (CUI), Controlled Technical Information (CTI), and classified material. Provide confirmation of compliance with relevant defense cybersecurity standards (e.g., NIST SP 800-171, CMMC requirements). SUBMISSION INSTRUCTIONS: Interested vendors are strongly encouraged to submit a capabilities statement with the following information: NAICS: 332993 – Ammunition Manufacturing, 333249 – Other Industrial Machinery Manufacturing PSC: 1390 – Fuzes and Primers Responses shall be in PDF format and shall not exceed fifteen (15) pages, including the cover sheet, photos, and diagrams. The minimum acceptable font size is 12 Calibri. The cover sheet shall include the following company information: Response shall include documentation of technical expertise and capability in sufficient detail for the Government to adequately assess the capabilities of your company. It is imperative that business concerns responding to this Request for Information (RFI) articulate their capabilities clearly and adequately. Classified material and material samples will not be accepted. In addition, please provide Full company name and address, point of contact with telephone number and email address, CAGE Code and DUNS number, size of business (i.e. large, small, disadvantaged, veteran owned, woman owned, etc.) and applicable NAICS and Product Service Code’s (PSC), and website (if applicable). Vendors must be properly registered in the Government System for Award Management database (SAM). Contractors may obtain information on SAM registration and annual confirmation of requirements by calling 1-866-606-8220, or via the Internet at www.sam.gov. The official response must be submitted to the U.S. Army Contracting Command – Rock Island at Picatinny. Please send responses to Contracting/Agreements Officer Charlotte Sylvain-Ceraul at charlotte.a.sylvain-ceraul.civ@army.mil and Contract Specialist, Antonius Gill at antonius.gill.civ@army.mil no later than November 19, 2026, at 3:30 p.m. Eastern Standard Time. Phone inquiries will not be accepted; all questions must be submitted in writing via email. Respondents will not receive notification regarding the results of the survey.
58%
Market Research11/19/2026
Synopsis of Proposed Contract Action: This is a pre-solicitation synopsis in accordance with FAR 5.204. The Naval Surface Warfare Center Indian Head Division (NSWC IHD), Picatinny, New Jersey Detachment intends to solicit and award a firm-fixed price contract on a sole source basis for the Production and Lot Acceptance testing of the MK 307 MOD 0 57 mm Dummy Cartridges in support of United States Navy (USN) with the potential to support Foreign Military Sales (FMS). The proposed awardee is the Original Equipment Manufacturer (OEM); BAE Systems Land & Armaments L.P., 4800 E River Road, Minneapolis, MN 55421-1402; CAGE Code 44114 It is anticipated that this contract will be a Singe Award supporting FY27 requirements with final delivery of the cartridges to occur by end of FY29. This is not a Request for Proposal or Quote (RFP/RFQ) nor does it construe as a commitment by the Government. This synopsis provides pre-solicitation notice of an upcoming solicitation. Any inquiries maybe submitted to Contract Specialist: Michael Anthony michael.j.anthony40.civ@us.navy.mil
57%
Pre-Solicitation11/27/2026
Request for Proposal to procure 57mm Target Practice (TP) Cartridges. The 57mm TP Cartridge is a 57mm, electrically-primed cartridge designed to function in the MK 110 Gun Mount (GM). The TP Cartridge consists of an inert projectile, a brass cartridge case, an electric primer, and propellant. Amendment 0001 posted 4-16-26. Amendment 0002 posted 4-30-26. Amendment 0003 posted 5-7-26.
57%
Solicitation05/27/2026

Additional Details

Solicitation Number

W15QKN20R0104

Archive Date

Nov 25, 2020

Office Address

PICATINNY ARSENAL, NJ, 07806-5000