Notice ID: 38fa249b9d22469fb1549bee4dc76edfCombined Synopsis/Solicitation
ROBOTIC WELDER
Archived on September 3, 2021. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 10:00 AM UTC−05:00
- Posted
- August 10, 2021
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 333992: Welding and Soldering Equipment Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W390 MCALESTER ARMY AMMO PLANT
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- W44W9M21Q0130
- Notice ID
- 38fa249b9d22469fb1549bee4dc76edf
Description
BRAND NAME ONLY - LINCOLN ELECTRIC WOLF ROBOTICS THE FOLLOWING MUST BE MET OR BID WILL BE REJECTED: SEE QUALIFYING STATEMENT FOR ITEM SPECIFICATIONS AND REQUIREMENTS SEE PROPOSAL SUBMISSION REQUIREMENTS FOB MCALESTER, OKLAHOMA ____________________________________________________________ Technical specifications MUST BE MET Technical Detail: MUST BE SUBMITTED with bid to be considered MUST BE SAM registered **Bidder questions must be submitted no later than 72 hours prior to solicitation close date/time, anything within 72 hours to close date may not receive a response. *** BIDS SUBMISSIONS ONLY VIA EMAIL: andrea.jones36.civ@mail.mil [ATTACH BID DOCUMENTS, SUBMIT TO LISTED EMAIL] Any changes to the solicitation shall also be posted to this web site and it is the contractor's responsibility to check site daily for any posted changes. All contractors who provide goods/services to the DOD must have a current active registration at System for Award Management (SAM) - https://www.sam.gov.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Andrea Jones
Documents
No documents available.
Lifecycle
Solicitation:
W44W9M21Q0130- Combined Synopsis
- Combined SynopsisCurrentAug 10, 2021
ROBOTIC WELDER
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
AMENDING TO CORRECT CLOSING DATE FOR MILLER DYNASTY 800 WELDER PACKAGE | - | Combined Synopsis | 08/18/2026 |
Reason for amendment is to add and edit salient characteristics - Orbital Welding Power Supply | - | Combined Synopsis | 03/02/2026 |
Linear Welder Control System | - | Combined Synopsis | 02/20/2026 |
MIG WELDER PACKAGE 3) General RequirementsThis section provides the specification requirements for the Welding Machine Package. Note: Every item listed in this section shall be accounted for in the offeror?s proposal for it to be considered (see section 6.).a) System shall meet all applicable OSHA standards and regulations.b) Vendor Shall ensure All Components of the system are compatible. c) Power supply shall have a minimum duty cycle of 100% at 36volts/400 amps.d) Machine Shall be compatible with 480-volt 3 phase power.e) System Shall be able to do the following processes,1. Shielded Metal Arc Welding (SMAW)2. Direct Current Gas Tungsten Arc Welding (DC GTAW)a. High Frequency Startb. Lift Arc3. Gas Metal Arc Welding (GMAW)4. Pulse Gas Metal Arc Welding (GMAW-P)5. Flux Core Arc Welding (FCAW)f) The wire feeder shall be a dual wire setup.1. The Wire feeder shall have a minimum duty cycle of 100% at 100 volts/600 amps.2. The Wire feeder Shall include spool covers for 33lb wire spools.3. The Wire feeder Shall include 2, 15ft (min) 300amp Mig gun assemblies.4. The Wire feeder Shall be compatible with ?Miller style? power pins on the Mig gun assemblies.5. Wire feeder control cable and weld power cable Shall be included.6. 25 ft work sense lead shall be included.7. Vendor Shall include Feeder drive roll kits of the following sizes (Dual size reversable are acceptable).a. .035 V-Grooveb. .045 V-Groovec. .062 V-Groove8. Vendor Shall include Wire Guides of the following sizes.a. .035b. .045c. .062g) System Shall include a wireless remote foot controller.1. Wireless foot control Shall accept ?AA? size batteries.2. Vendor Shall provide batteries to fill the controller not less than 2 times.h) System Shall include a heavy-duty foot control pedal with 20ft of cord.i) System Shall Include 2 Sheild Gas Flow meter regulators.j) System Shall include 2 gas hoses (4ft min).k) Machine must include a cooler.1. Cooler must be removeable for service/repair.l) Machine must have dedicated Tig Torch Connection.m) Machine must have dedicated Tig Gas hose Connection.n) Machine must have dedicated Tig Remote Connection.o) Machine must have dedicated Stick Connection.p) Machine must have dedicated Work cable Connection.q) Running Gear/Cart Shall be included.1. 2 brackets to stow the foot controls Shall be included.r) 25 ft(min) Work Lead Shall be included. | - | Combined Synopsis | 01/22/2026 |
WELDING MACHINE PACKAGE | - | Combined Synopsis | 12/24/2025 |
Additional Details
Solicitation Number
W44W9M21Q0130
Archive Date
Sep 3, 2021
Office Address
MCALESTER, OK, 74501-5000