GovChime
Notice ID: 4708b68bf1b14895a866cdfea54725d5Combined Synopsis/SolicitationArchived

P23 Fire Truck Engine

Archived on September 10, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM CDT
Posted
September 10, 2025
Notice type
Combined Synopsis/Solicitation
Set-aside
Small Business Set Aside - Total
NAICS
333618: Other Engine Equipment Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W7M9 USPFO ACTIVITY KSANG 190
Place of performance
5920 SE Coyote DrTopeka, KS 66619-1429, 66619
Last updated
Nov 8, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W50S7Y25Q0003
Notice ID
4708b68bf1b14895a866cdfea54725d5

Description

0002 - Multiple vendors requested pictures to determine if the engine is mechanical or DECC electronic. Engine has not been removed from fire truck at this time. See attached pictures received from customer.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Lifecycle

  1. 1
    Version 1Combined Synopsis/SolicitationArchived

    P23 Fire Truck Engine

    Notice aa16b37bd7104812aef4447865309768 on SAM.gov

  2. 2
    Version 2Combined Synopsis/SolicitationArchived

    P23 Fire Truck Engine

    Notice 0e04e764f919463dbc6033990b376fbb on SAM.gov

  3. 4
    Version 4Combined Synopsis/SolicitationArchivedCurrent

    P23 Fire Truck Engine

    Notice 4708b68bf1b14895a866cdfea54725d5 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Purchase of a diesel engine description: ENG 3Q DD13 EPA10 471903/911/9, 500hp, 1650 ft-lb, EPA 2010, AXT
-Solicitation01/14/2026
Ultrasonic Parts Washer. Please see attached solicitation. REASON FOR AMMENDMENT IS TO CHANGE NAICS TO 4940 AND PSC TO 333618. 2nd attempt to repost.
-Combined Synopsis11/16/2026
The requirement is for a Category II, three-point hitch boom mower (KWT 550 or equivalent) that is fully compatible with a Kubota M6-111 tractor (114 horsepower, 9,600 pounds). The boom mower must feature a maximum reach of 20 feet, a maximum transport height of 11.5 feet, and a maximum transport width of 6.5 feet. The hydraulic system requires a minimum 50-gallon oil tank capacity, integrated temperature and oil level indicators, a hydraulic safety breakaway device, a hydraulic lock, and quick-connect fittings. It must also include any additional auxiliary pumps and valves necessary to ensure complete mounting and operation on the specified Kubota tractor. For standalone storage and transport, the unit must include adjustable leg supports capable of supporting the assembly when dismounted, as well as a rear-facing road lighting kit. The cutting assembly requires a flail head attachment (KW126 or equivalent) with a minimum four-foot working width and a total weight under 650 pounds. The unit must utilize Type VI flail knives and include two full replacement sets. The deliverable also requires two copies each of the service, parts, and operators manuals, with final delivery to Fort Drum, New York.
-Combined Synopsis09/16/2026
The 15-foot offset flex arm rotary cutter requires heavy-duty 11L by 15, 12-ply tires with a minimum load capacity of 4,000 pounds. It must be capable of cutting directly in-line with the tractor or at any offset distance up to 122 inches (10.16 feet). The assembly requires a minimum two-and-a-half-inch castor pivot shaft, six-bolt hubs with at least a 6,000-pound capacity, and bolt-in replaceable axles. Major pivot points must utilize spring steel tension bushings and induction-hardened pins. Hydraulic and mechanical requirements include a minimum of four hydraulic circuits with independent wing lift for the 15-foot mower, a heavy-duty three-and-a-half by 36-inch welded hydraulic cylinder, and an optional six-port selector valve kit for independent wing action on tractors with limited hydraulic outlets. Power delivery requires a minimum rating of 200 horsepower at 1,000 RPM while accommodating 540 RPM power delivery from the tractor. A safety lighting kit is also required. Standard travel dimensions must maintain a maximum width of 70 inches to the left of the tractor and 52 inches to the right, totaling 121 inches for the arm and rotary cutter assembly. When operating with the stop block installed on the transport lock bar designed to improve clearance for oncoming traffic on narrow roads the dimensions are configured to 55 inches to the left of the tractor and 66 inches to the right (totaling 121 inches).
-Combined Synopsis09/16/2026
Fully welded top deck. Gearbox seal protection. 6-inch blade overlap. Welded top deck. Cut brush and saplings up to 3-inch. Must have a stump jumper, backed with a 1-inch thick mounting bar. Self-leveling pull-type hitch. Rear facing LED signal lights. 1 right side hinged wing section. 1-inch solid hinge rods. Wing transport lock. 1-inch enclosed front to rear dual leveling rods. 5-inch square rear axle tubing. 540 rpm: center: 17,377 fpm (88.3 mps), wings: 17,329 fpm (88 mps). 1000 rpm: center: 18,165 fpm (92.3 mps), wings: 18,317 fpm (93.1 mps). Spring-cushioned on center-axle. Bar-tite hitch. 1/2-inch x 3-inch welded deck ring. Airplane tires with foam filling. 10 year limited gearbox warranty.
-Combined Synopsis09/10/2026

Additional Details

Solicitation Number

W50S7Y25Q0003

Archive Date

Sep 10, 2026

Office Address

TOPEKA, KS, 66619-1429