Notice ID: 1fa9b83466744fa7b8597a3e271af132Combined Synopsis/Solicitation
RR Turnouts and Compromise bars
Archived on February 21, 2023. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 3:00 PM UTC−06:00
- Posted
- January 25, 2023
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 336510: Railroad Rolling Stock Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W390 MCALESTER ARMY AMMO PLANT
- Place of performance
- McAlester, OK, 74501
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- W519TC23Q2119
- Notice ID
- 1fa9b83466744fa7b8597a3e271af132
Description
McAlester Army Ammunition Plant has issued a request for RR Turnouts and compromise bars (See posted solicitation for additional requirements.) FOB Destination - McAlester Army Ammunition Plant, McAlester, OK. This solicitation will be issued via the internet at https//www.sam.gov and will close 02/06/2023 at 3:00 pm Central Daylight Savings time. Salient Characteristics MUST BE MET and submitted with Detail: MUST BE SUBMITTED with quote to be considered. MUST BE SAM registered and active. Quotes are to be sent on SIGNED AND FILLED IN SOLICITATION, with any needed certification or specifications verified to regina.l.gibson7.civ@army.mil. Questions or any needed additional information must be submitted no later than 72 hours prior to solicitation close date/time and should be emailed directly to regina.l.gibson7.civ@army.mil. DO NOT FAX. Any changes to the solicitation shall also be posted to this web site and it is the contractor's responsibility to check site daily for any posted changes. All contractors who provide goods/services to the DOD must have a current active registration at System for Award Management (SAM) - https://www.sam.gov
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
W519TC23Q2119- Combined Synopsis
- Combined SynopsisCurrentJan 25, 2023
RR Turnouts and Compromise bars
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
McAlester Army Ammunition Plant has issued a Simplified Acquisition under SAT request. For HY-Rail Excavator, Grapple, and Magnet (See posted solicitation documents for additional requirements.) FOB Destination - McAlester Army Ammunition Plant, McAlester, OK. Closing on 11/16/2026 at 12:00 pm Central Standard time. Salient Characteristics MUST BE MET and submitted with Detail and MUST BE SUBMITTED with quote to be considered. All contractors who provide goods/services to the DOD must have a current active registration at System for Award Management (SAM) - https://www.sam.gov Quotes are to be sent on SIGNED AND FILLED IN SOLICITATION, with any needed certification or specifications verified to regina.l.gibson7.civ@army.mil. Questions or any needed additional information must be submitted no later than 72 hours prior to solicitation close date/time and should be emailed directly to regina.l.gibson7.civ@army.mil. DO NOT FAX. Any changes to the solicitation shall also be posted to this web site and it is the contractor's responsibility to check site daily for any posted changes. | - | Combined Synopsis | 11/16/2026 |
Salient Characteristics:7 in. X 9 in. X 8 ft. 6 in. Wood Grade TieMust meet AREMA spec.All domestic materialOnly new material will be accepted.Truck delivery ONLY, no rail delivery acceptedQTY ? 400 DELIVERY REQUIRMENTS.MATERIAL MUST BE DELIVERED TO ABERDEEN PROVING GROUND, 6836 CIVIL RD., ABERDEEN PROVING GROUND, MD 21005-5001, ON 2 JUNE 2026, NO SOONER OR LATERSpecial Requirements: Effective January 20, 2026, visitors to military installations will be required to present a REAL ID-compliant driver?s license or another acceptable form of identification to access certain bases, including the McAlester Army Ammunition Plant. If you do not have a REAL ID, you may use an alternate credential, such as a U.S. passport of a Federal PIV card. Please ensure your identification meets these requirements to avoid being denied access to the installation. | - | Combined Synopsis | 04/20/2026 |
LIGHT DUTY HY-RAIL TRUCK WITH HARSCO HY-RAIL LD1515 ATTACHMENT. | - | Combined Synopsis | 11/16/2026 |
Hy-Rail Light Duty Truck | - | Combined Synopsis | 08/18/2026 |
Minimum 72 inch long x 24 inch wide and no more than 4 inch thick. Minimum weight per single spanner 20,000lbs (40,000lbs per pair/axle) total weight minimum of each spanner is 78lbs EA. Rated capacity shall be no more than 50% of failure strength (at least a 2-to-1 safety factor). Failure strength is determined by the amount of weight that causes permanent deformation of the aluminum. Meaning that an 80,000 axle can be placed on a pair of spanners before any permanent deformation of aluminum appears. Minimum structure tubes 3 inch x3 inch and no more than 4 inch x4 inch. Top surface of spanner will be composed of maximum 2 inch wide high-traction rungs. The rungs shall be spaced no more than 4 inch to allow tiedown chains or straps to be routed between the rungs and over the structural tubes also spacing allows for debris to fall through. Must have reinforced kickplate on one side to rest on flat/ unobstructed surface. Minimum 12 inch heavy duty reinforced stub toe on each end: taper to 2 inch blunt end, knife end not acceptable, Each spanner must be etched with part number and capacity. | - | Combined Synopsis | 08/14/2026 |
Additional Details
Solicitation Number
W519TC23Q2119
Archive Date
Feb 21, 2023
Office Address
MCALESTER, OK, 74501-5000