GovChime
Notice ID: 4ff2538822ad4191b2c552ade2358702Solicitation

Hi-Rail Tracked Excavator

Archived on March 6, 2025. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
10:00 AM UTC−05:00
Posted
February 13, 2025
Notice type
Solicitation
NAICS
336510: Railroad Rolling Stock Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W6QK ACC-RI
Place of performance
74501
Last updated
Jan 23, 2026

Identifiers

Solicitation number
W519TC25Q2128
Notice ID
4ff2538822ad4191b2c552ade2358702

Description

Salient Characteristics Hi-Rail Tracked E xcavator With Attachments - Rev. 1 Chassis: ? Base machine shall be a standard rubber tracked excavator ? Tier 4 Final Diesel Engine ? Min. 98 HP ? Standard hydraulics to operate boom and stick ? Auxiliary hydraulic controls and lines to operate Hi-Rail system and stick attachments ? Stick to be fitted with hydraulically operated quick coupler with in-cab controls, which provides 360-degree rotation and side-to-side tilting action for attachments (tilt/rotator) ? Rubber tracks ? ROPS/FOPS compatible, climate control cab ? Front window guard ? Fully adjustable, air suspension seat ? Standard lighting and instrumentation ? One-piece boom, welded, box-type construction ? Medium Stick, welded, box-type construction ? Approximately 27 fully extended reach ? Joystick controls for boom and stick attachments ? Counterweight, Min. 4,850 lbs ? Tight tail swing design to prevent cab damage ? Machine shall include a hydraulic emergency pump for boom raise and swing in the event of machine shut down ? The electrical system shall be 24 volt and alternator rating no less than 50 amp ? A TAG-out LOCK-out Battery Disconnect will be provided ? Rearview Camera ? ABC Fire Extinguisher Hi-Rail Guide Wheel Drive System: ? Base machine shall be fitted with retractable Hi-rail system for on-track capability ? The hi-rail system must provide a stable working platform and allow the excavator to match ground-based lift capacities while the hi-rail is engaged, regardless of the attachment in use. ? Hi-rail wheels retract for high ground clearance. ? Hydraulically controlled Hi-rail gear to be permanently mounted to frame ? Hi-rail gear to be controlled from cab ? 16 diameter Hi-rail guide wheels ? Mechanical lock pins lock Hi-rail in position ? Solid axles and heavy-duty bearings ? The rail axles shall be set to run on 56.5" Track Gauge (1435 mm) ? Hi-Rail travel maximum 22 mph (35 km/h) ? The machine's propel travel motor system shall be hydraulically driven and mounted on the ends of each axle w/hydraulically actuated shoe brakes. ? A chain drive propel travel motor system shall not be accepted ? Travel motors shall be actuated by a two-direction foot pedal inside operators station ? The lower undercarriage shall include sufficient keyhole style tie down mounts for transportation of this machine by truck ? The lower undercarriage shall include drop pin style tow hitch points on each end of the machine to connect rail carts ? The lower undercarriage shall be equipped with quick-connect hydraulic brake connections on each end of the machine to activate fail safe disc service & emergency/park brakes on rail carts ? Drawbar pull shall be at least 14,661 lbs (6650 kgf) for pulling a minimum cart capacity of 40,000 lbs Attachments: ? Tie Crane shall be equipped with hydraulic generator and magnet Magnet Generator ? Min. 3.2kw hydraulic driven generator ? 230-volt VDC with 100% duty Cycle system ? Direct Drive hydraulic powered motor ? Adjustable monitor control from inside operators station ? Incorporated load limit control that prevents system overloading ? Torque control to prevent overloading of hydraulic motor ? Adjustable magnet force control ? Integrated insulation monitoring to help prevent magnet over heating ? Unit to be mounted in a location for easy access for service. Magnet ? Min. 30 Magnet ? Copper coil with Class H insulation ? Heavy duty fabricated housing designed for wear and long life ? 5' lead with quick disconnects ? High strength tested, replaceable alloy steel chains ? Multi Grapple with quick coupler mount for rotator/tilter ? Expander pins ? Self-lubricating bearings ? Mechanical end stops ? Gripper width: Min. 5 - 60 ? Min. lifting capacity: 10,000 lbs ? Mulching head with quick coupler mount for rotator/tilter ? Hydraulically powered horizontal drum mulcher ? Carbide tipped teeth with carbide inserts ? Min. 36 Working width ? Power grip bucket with quick coupler mount for rotator/tilter ? Multi-purpose bucket that integrates digging, trenching and clamshell capabilities ? Min. 36 Working width

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Select documents to download

Showing 3 of 3 items

Document
Source
Agency
Posted Date
File Size
Actions
SolicitationDEPT OF THE ARMYFeb 13, 2025-
SolicitationDEPT OF THE ARMYFeb 13, 2025-
SolicitationDEPT OF THE ARMYFeb 13, 2025-

Lifecycle

Solicitation:W519TC25Q2128
  1. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. 3×
    SolicitationCurrentFeb 11, 2025

    Hi-Rail Tracked Excavator

    Notice 4ff2538822ad4191b2c552ade2358702 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
McAlester Army Ammunition Plant has issued a Simplified Acquisition under SAT request. For HY-Rail Excavator, Grapple, and Magnet (See posted solicitation documents for additional requirements.) FOB Destination - McAlester Army Ammunition Plant, McAlester, OK. Closing on 11/16/2026 at 12:00 pm Central Standard time. Salient Characteristics MUST BE MET and submitted with Detail and MUST BE SUBMITTED with quote to be considered. All contractors who provide goods/services to the DOD must have a current active registration at System for Award Management (SAM) - https://www.sam.gov Quotes are to be sent on SIGNED AND FILLED IN SOLICITATION, with any needed certification or specifications verified to regina.l.gibson7.civ@army.mil. Questions or any needed additional information must be submitted no later than 72 hours prior to solicitation close date/time and should be emailed directly to regina.l.gibson7.civ@army.mil. DO NOT FAX. Any changes to the solicitation shall also be posted to this web site and it is the contractor's responsibility to check site daily for any posted changes.
-Combined Synopsis11/16/2026
LIGHT DUTY HY-RAIL TRUCK WITH HARSCO HY-RAIL LD1515 ATTACHMENT.
-Combined Synopsis11/16/2026
Hy-Rail Light Duty Truck
-Combined Synopsis08/18/2026
Minimum 72 inch long x 24 inch wide and no more than 4 inch thick. Minimum weight per single spanner 20,000lbs (40,000lbs per pair/axle) total weight minimum of each spanner is 78lbs EA. Rated capacity shall be no more than 50% of failure strength (at least a 2-to-1 safety factor). Failure strength is determined by the amount of weight that causes permanent deformation of the aluminum. Meaning that an 80,000 axle can be placed on a pair of spanners before any permanent deformation of aluminum appears. Minimum structure tubes 3 inch x3 inch and no more than 4 inch x4 inch. Top surface of spanner will be composed of maximum 2 inch wide high-traction rungs. The rungs shall be spaced no more than 4 inch to allow tiedown chains or straps to be routed between the rungs and over the structural tubes also spacing allows for debris to fall through. Must have reinforced kickplate on one side to rest on flat/ unobstructed surface. Minimum 12 inch heavy duty reinforced stub toe on each end: taper to 2 inch blunt end, knife end not acceptable, Each spanner must be etched with part number and capacity.
-Combined Synopsis08/14/2026
Item: Rail SpannersBrand Name: MilAirXPart Number: Salient Characteristics: MilAirX Rail Spanners are the strongest yet lightest railway/railcar spanners on the planet. Rated at 40,000lbs per pair/axle (20,000lbs each).These spanners have at least a two-to-one safety factor (meaning the point of failure is over80,000lbs per axle) 72 inches long, 24 inches wide, 4 inches thick. Engineered with a ?Stub Toe? (Bullnose) increases lifespan. (A knife point will eventually curl up over time due to use.) The MilAirX Rail Spanners has a beefy ?Kicker Plate? that will stand up to abuse.
-Combined Synopsis07/02/2026

Additional Details

Solicitation Number

W519TC25Q2128

Archive Date

Mar 6, 2025