GovChime
Notice ID: 25358974e6234e64aaf7b568887dd4adCombined Synopsis/Solicitation

MJU76 B End Caps

Archived on January 19, 2022. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM UTC−06:00
Posted
December 21, 2022
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
325211: Plastics Material and Resin Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W4MM USA JOINT MUNITIONS CMD
Last updated
Sep 9, 2025

Identifiers

Solicitation number
W52P1J22Q76GF
Notice ID
25358974e6234e64aaf7b568887dd4ad

Description

DESCRIPTION This is a combined synopsis/solicitation for commercial products prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will NOT be issued. This is a Request for Quote (RFQ) using FAR Part 12, Acquisition of Commercial Items; the Solicitation Number is W52P1J-22-Q-76GF. The solicitation and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-07. The NAICS code for this procurement is 325211; the small business size standard is 1,250 employees. The Product Service Code is 9330. Offerors must be registered within the System for Award Management (SAM) databased at time of response to this solicitation. The website for SAM is https://www.sam.gov/. Addendum to 52.212-1 DESCRIPTION OF REQUIREMENT CLIN 0001: FAT End Cap; Quantity 1 LO 1 LO (Lot) = 40 pieces from each (EA) mold cavity In accordance with Drawing 3976AS118 Rev C, as found in Attachment 01 Raw material in accordance with Attachment 02 Material Specification ASTM D3935 End Cap CLIN 0002: Mold End Cap; Quantity 1 EA In accordance with Drawing 3976AS118 Rev C, as found in Attachment 01 Raw material in accordance with Attachment 02 Material Specification ASTM D3935 End Cap CLIN 0003: End Cap; Quantity 143,500 EA In accordance with Drawing 3976AS118 Rev C, as found in Attachment 01 Raw material in accordance with Attachment 02 Material Specification ASTM D3935 End Cap A Certified Material Analysis is required for each item for each delivery. See Attachment 03. JCP ACCESS OF RESTRICTED DRAWINGS DRAWING ACCESS (See additional Technical Data Package Instructions in Attachment 04) The drawings associated with this acquisition are Distribution Level D, authorized to the Department of Defense (DoD) and U.S. DoD contractors ONLY. All firms must be registered in the Joint Certification Program (JCP) in order to access the drawings associated with this solicitation. The address for registration is https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/default.aspx Registration requires completion of the DD Form 2345. Firms are required to have a current valid Cage Code in order to register. NOTE: THE DD FORM 2345 MAY BE SUBMITTED ELECTRONICALLY. DIRECTIONS FOR ELECTRONIC SUBMISSION ARE LOCATED AT THE FOLLOWING SITE, UNDER SUBMITTING THE DD FORM 2345 https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/SpecificDD2345Instructions.aspx Access to the drawings is restricted to the data custodian listed on the DD Form 2345. *NOTE: When requesting access to the drawings, the company CAGE CODE should be entered within the Reason for Request block. TYPE OF ACQUISITION AND CONTRACT This acquisition is issued as 100% Small Business Set-Aside. Award will be made using Lowest Price Acceptable (LPA) Source Selection procedures, resulting in a single award Firm Fixed Price Contract. DELIVERY AND LOCATION CLIN Description Suggested Delivery 0001 FAT End Cap 14 weeks after award 0002 Mold End Cap 14 weeks after award 0003 End Cap 10,000 per month beginning 4 weeks after FAT approval Delivery will be FOB Destination to Crane Army Ammunition Activity, Building 148 300 Highway 361, Crane, IN 47522-5001, in accordance with the following: Crane Army Ammunition Activity Delivery Instructions: CAAA receiving hours are 0700 1430, Mon - Thurs BY APPOINTMENT ONLY; Includes Inert & Freight All Kind (FAK). Appointments shall be made via Carrier Appointment System (CAS). Carriers without access to the CAS System, call (812)854-2199 or (812) 854-2339, 48 hours prior to delivery for appointment. Failure to follow the protocol stated herein and/or obtain a scheduled delivery time prior to delivery, may result in the truck being turned away. PACKAGING AND MARKING REQUIREMENTS Preservation, Packaging, and Packing shall be in accordance with ASTM D 3951 (Commercial Packaging). End Caps must be marked with "76" printed on the top surface at 1/2" high, approximately centered. Each shipment shall be marked with an identifiable Lot Number. This Lot Number shall be created in accordance with Attachment 05 Lot Number Instructions. The Lot Number shall also be included on the Certified Material Test Report as found in Attachment 03. ***CLIN 0002 End Cap Mold, shall be marked as follows: 1. Contractor shall return mold to CAAA upon completion of contract production 2. Contractor shall supply CAAA with the Mold/Insert drawings when they deliver the FAT parts 3. Contractor shall send CAAA the injection mold parameters used to mold acceptable parts, upon FAT approval 4. All plastic used for injection mold parts for CAAA shall be virgin material, no recycled material allowed 5. Mold shall be marked: MJU 76/B END CAP 3976AS118 Rev C 6. All Mold markings shall remain legible and shall not wear off during mold use 7. Parts shall be traceable to the mold cavity from which they came QUOTE/PROPOSAL SUBMISSION REQUIREMENTS Offerors shall submit the following in response to this solicitation: Completed Pricing Sheet at Attachment 06. All yellow-highlighted sections shall be completed. Prices shall be stated to 2 decimal places. 2. Complete Provision at Attachment 07, FAR 52.212-3 Alt I, paragraph (b) only. BASIS FOR AWARD Award will be made on price only to the offeror who provides the lowest Total Evaluated Price, who is determined to be responsible and who is compliant with all the requirements of this Solicitation. Total Price is calculated as the total sum of CLINS 0001, 0002, and 0003. In accordance with FAR 52.212-1(g), the Government intends to award a contract against this solicitation without discussions. LISTING OF ATTACHMENTS Attachment 01 - Drawing 3976AS118 Rev C End Cap Attachment 02 - Material Specification ASTM D3935 End Cap Attachment 03 - Certified Material Test Report Attachment 04 - Technical Data Package Instructions Attachment 05 Lot Number Instructions Attachment 06 Pricing Sheet Attachment 07 - FAR 52.212-3, Reps and Certs DEADLINE FOR SUBMISSION Offers are due on September 13, 2022, no later than 12:30 pm Central Time. Offers shall be submitted in the following way: Electronically via email to the Contract Specialist, beatrix.r.hintzke.civ@army.mil and Contracting Officer, cindy.k.wagoner.civ@army.mil. Offerors shall include W52P1J-22-Q-76GF - Response [Insert Offerors Name] within the Subject line. QUESTIONS Questions shall be submitted in the same manner as Offers, electronically via email to the Contract Specialist and Contracting Officer **Note: Interested Offerors must submit any questions concerning this solicitation at the earliest time possible, to enable the Buyer to respond. Questions not received within a reasonable time prior to close of the solicitation may not be considered. SOLICITATION PROVISIONS The following Federal Acquisition Regulations (FAR), and Defense Federal Acquisition Regulation Supplement (DFARS) provisions apply and are incorporated by reference (provisions may be obtained via the internet at http://www.acquisition.gov): FAR 52.204-7- System for Award Management FAR 52.204-16- Commercial and Government Entity Code Reporting FAR 52.204-22 - Alternative Line Item Proposal FAR 52.204-24 - Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment, as prescribed in 4.2105(a). FAR 52.207-2 - Notice of Streamlined Competition FAR 52.212-1- Instructions to Offerors Commercial Products and Commercial Services FAR 52.212-3 Alt I, Attachment 07 - Offeror Representations and Certifications Commercial Products and Commercial Services--Alternate I FAR 52.252-1 - Solicitation Provisions Incorporated by Reference FAR 52.252-3 - Alterations in Solicitation FAR 52.252-5 - Authorized Deviations in Provisions DFARS 252.203-7005 - Representation Relating to Compensation of Former DoD Officials DFARS 252.204-7008 -Compliance with Safeguarding Covered Defense Information Controls DFARS 252.204-7016 - Covered Defense Telecommunications Equipment or Services--Representation DFARS 252.204-7017 - Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services--Representation DFARS 252.204-7019 - Notice of NIST SP 800-171 DoD Assessment Requirements. DFARS 252.213-7000 - Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations DFARS 252.215-7013 - Supplies and Services Provided by Nontraditional Defense Contractors DFARS 252.225-7055 Representation Regarding Business Operations with the Maduro Regime DFARS 252.246-7005 - Notice of Warranty Tracking Of Serialized Items CLAUSES The following Federal Acquisition Regulations (FAR), and Defense Federal Acquisition Regulation Supplement (DFARS) clauses apply and are incorporated by reference (clauses may be obtained via the internet at http://www.acquisition.gov): FAR 52.203-12 - Limitation on Payments to Influence Certain Federal Transactions FAR 52.204-13 - System for Award Management Maintenance FAR 52.204-18 - Commercial and Government Entity Code Maintenance FAR 52.204-19 - Incorporation by Reference of Representations and Certifications FAR 52.204-23 - Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities FAR 52.204-25 - Prohibition of Contracting for Certain Telecommunications and Video Surveillance Services or Equipment FAR 52.209-4 - First Article Approval Government Testing FAR 52.209-4 Alternate 1- First Article Approval Government Testing FAR 52.209-10 - Prohibition on Contracting with Inverted Domestic Corporations FAR 52.212-4 - Contract Terms and Conditions Commercial Products and Commercial Services FAR 52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders Commercial Products and Commercial Services Within 52.212-5 the following clauses apply: __ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) ( 41 U.S.C. 4704 and 10 U.S.C. 2402). __ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) ( 41 U.S.C. 3509)). __ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) _x_ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note). __ (5) [Reserved]. __ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C). __ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C). _x_ (8) 52.209-6, Protecting the Governments Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) ( 31 U.S.C. 6101 note). __ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) ( 41 U.S.C. 2313). __ (10) [Reserved]. __ (11) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Sep 2021) ( 15 U.S.C. 657a). __ (12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Sep 2021) (if the offeror elects to waive the preference, it shall so indicate in its offer) ( 15 U.S.C. 657a). __ (13) [Reserved] _x_ (14) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) ( 15 U.S.C. 644). __ (ii) Alternate I (Mar 2020) of 52.219-6. __ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) ( 15 U.S.C. 644). __ (ii) Alternate I (Mar 2020) of 52.219-7. __ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) ( 15 U.S.C. 637(d)(2) and (3)). __ (17) (i) 52.219-9, Small Business Subcontracting Plan (Nov 2021) ( 15 U.S.C. 637(d)(4)). __ (ii) Alternate I (Nov 2016) of 52.219-9. __ (iii) Alternate II (Nov 2016) of 52.219-9. __ (iv) Alternate III (Jun 2020) of 52.219-9. __ (v) Alternate IV (Sep 2021) of 52.219-9. __ (18) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) ( 15 U.S.C. 644(r)). __ (ii) Alternate I (Mar 2020) of 52.219-13. __ (19) 52.219-14, Limitations on Subcontracting (Sep 2021) ( 15 U.S.C. 637s). __ (20) 52.219-16, Liquidated Damages Subcontracting Plan (Sep 2021) ( 15 U.S.C. 637(d)(4)(F)(i)). __ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Sep 2021) ( 15 U.S.C. 657f). _x_ (22) (i) 52.219-28, Post Award Small Business Program Rerepresentation (Sep 2021) ( 15 U.S.C. 632(a)(2)). __ (ii) Alternate I (Mar 2020) of 52.219-28. __ (23) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Sep 2021) ( 15 U.S.C. 637(m)). __ (24) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Sep 2021) ( 15 U.S.C. 637(m)). __ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) ( 15 U.S.C. 644(r)). __ (26) 52.219-33, Nonmanufacturer Rule (Sep 2021) ( 15U.S.C. 637(a)(17)). _x_ (27) 52.222-3, Convict Labor (Jun 2003) (E.O.11755). _x_ (28) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2022) (E.O.13126). _x_ (29) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). _x_ (30) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246). __ (ii) Alternate I (Feb 1999) of 52.222-26. _x_ (31) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) ( 38 U.S.C. 4212). __ (ii) Alternate I (Jul 2014) of 52.222-35. _x_ (32) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) ( 29 U.S.C. 793). __ (ii) Alternate I (Jul 2014) of 52.222-36. _x_ (33) 52.222-37, Employment Reports on Veterans (Jun 2020) ( 38 U.S.C. 4212). __ (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). _x_ (35) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) ( 22 U.S.C. chapter 78 and E.O. 13627). __ (ii) Alternate I (Mar 2015) of 52.222-50 ( 22 U.S.C. chapter 78 and E.O. 13627). __ (36) 52.222-54, Employment Eligibility Verification (May 2022) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.) __ (37) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) __ (ii) Alternate I (May 2008) of 52.223-9 ( 42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) __ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693). __ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun 2016) (E.O. 13693). __ (40) (i) 52.223-13, Acquisition of EPEAT -Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514). __ (ii) Alternate I (Oct 2015) of 52.223-13. __ (41) (i) 52.223-14, Acquisition of EPEAT -Registered Televisions (Jun 2014) (E.O.s 13423 and 13514). __ (ii) Alternate I (Jun2014) of 52.223-14. __ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (May 2020) ( 42 U.S.C. 8259b). __ (43) (i) 52.223-16, Acquisition of EPEAT -Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514). __ (ii) Alternate I (Jun 2014) of 52.223-16. _x_ (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Jun 2020) (E.O. 13513). __ (45) 52.223-20, Aerosols (Jun 2016) (E.O. 13693). __ (46) 52.223-21, Foams (Jun2016) (E.O. 13693). __ (47) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a). __ (ii) Alternate I (Jan 2017) of 52.224-3. __ (48) 52.225-1, Buy American-Supplies (Nov 2021) ( 41 U.S.C. chapter 83). __ (49) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (Nov 2021) ( 41 U.S.C.chapter83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43. __ (ii) Alternate I (Jan 2021) of 52.225-3. __ (iii) Alternate II (Jan 2021) of 52.225-3. __ (iv) Alternate III (Jan 2021) of 52.225-3. __ (50) 52.225-5, Trade Agreements (Oct 2019) ( 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). _x_ (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O. s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). __ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302Note). __ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) ( 42 U.S.C. 5150). __ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov2007) ( 42 U.S.C. 5150). __ (55) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021). __ (56) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) ( 41 U.S.C. 4505, 10 U.S.C. 2307(f)). __ (57) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) ( 41 U.S.C. 4505, 10 U.S.C. 2307(f)). _x_ (58) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) ( 31 U.S.C. 3332). __ (59) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) ( 31 U.S.C. 3332). __ (60) 52.232-36, Payment by Third Party (May 2014) ( 31 U.S.C. 3332). __ (61) 52.239-1, Privacy or Security Safeguards (Aug 1996) ( 5 U.S.C. 552a). __ (62) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) ( 15 U.S.C. 637(d)(13)). __ (63) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) ( 46 U.S.C. 55305 and 10 U.S.C. 2631). __ (ii) Alternate I (Apr 2003) of 52.247-64. __ (iii) Alternate II (Nov 2021) of 52.247-64. FAR 52.225-6- Trade Agreements Certificate FAR 52.232-1 - Payments FAR 52.232-8 - Discounts for Prompt Payment FAR 52.232-40 - Providing Accelerated Payments to Small Business Subcontractors FAR 52.233-1 - Disputes FAR 52.233-3 - Protest after Award FAR 52.233-4 - Applicable Law for Breach of Contract Claim FAR 52.243-1 - Changes Fixed Price FAR 52.247-34 - FOB Destination FAR 52.249-1 - Termination for Convenience of the Government (Fixed-Price)(Short Form) FAR 52.252-2 - Clauses Incorporated by Reference FAR 52.252-4 - Alterations in Contract FAR 52.252-6 - Authorized Deviations in Clauses DFARS 212.301 (Class Deviation 2018-O0021) - DOD Commercial Item Omnibus Clause for Acquisitions Using the Standard Procurement System DFARS 252.203-7000 - Requirements Relating to Compensation of Former DoD Officials DFARS 252.203-7002 - Requirement to Inform Employees of Whistleblower Rights DFARS 252.204-7000 - Disclosure of Information DFARS 252.204-7003 - Control of Government Personnel Work Product DFARS 252.204-7009 - Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information DFARS 252.204-7012 - Safeguarding Covered Defense Information and Cyber Incident Reporting DFARS 252.204-7015 - Notice of Authorized Disclosure of Information for Litigation Support DFARS 252.204-7018 - Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services DFARS 252.204-7020 - NIST SP 800-171 DoD Assessment Requirements. DFARS 252.211-7003 - Item Unique Identification and Valuation DFARS 252.215-7002 - Cost Estimating System Requirements DFARS 252.223-7008 - Prohibition of Hexavalent Chromium DFARS 252.225-7001 Buy American Act Balance of Payments Program DFARS 252.225-7002- Qualifying Country Sources as Subcontractors DFARS 252.225-7021 (DEV 2020- O0019) Trade Agreements DFARS 252.225-7021- Trade Agreements- Basic DFARS 252.225-7048 - Export-Controlled Items DFARS 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime DFARS 252.232-7003 - Electronic Submission of Payment Requests and Receiving Reports DFARS 252.232-7006 - Wide Area WorkFlow Payment Instructions DFARS 252.232-7010 - Levies on Contract Payments DFARS 252.232-7017 - Accelerating Payments to Small Business Subcontractors- Prohibition on Fees and Consideration DFARS 252.243-7001 - Pricing of Contract Modifications DFARS 252.244-7000 - Subcontracts for Commercial Items DFARS 252.247-7023 - Transportation of Supplies by Sea Basic The following clause is provided in full text FAR 52.209-4, First Article Approval-Government Testing (Sep 1989) (a) The Contractor shall deliver 40 samples from each cavity mold of Lot/Item MJU 76/B End Caps within TBD calendar days from the date of this contract to the Government at Crane Army Ammunition Activity, 300 Highway 361 Building 148, Crane, IN 47522 for first article tests. The shipping documentation shall contain this contract number and the Lot/Item identification. The characteristics that the first article must meet and the testing requirements are specified elsewhere in this contract. (b) Within 10 calendar days after the Government receives the first article, the Contracting Officer shall notify the Contractor, in writing, of the conditional approval, approval, or disapproval of the first article. The notice of conditional approval or approval shall not relieve the Contractor from complying with all requirements of the specifications and all other terms and conditions of this contract. A notice of conditional approval shall state any further action required of the Contractor. A notice of disapproval shall cite reasons for the disapproval. (c) If the first article is disapproved, the Contractor, upon Government request, shall submit an additional first article for testing. After each request, the Contractor shall make any necessary changes, modifications, or repairs to the first article or select another first article for testing. All costs related to these tests are to be borne by the Contractor, including any and all costs for additional tests following a disapproval. The Contractor shall furnish any additional first article to the Government under the terms and conditions and within the time specified by the Government. The Government shall act on this first article within the time limit specified in paragraph (b) of this clause. The Government reserves the right to require an equitable adjustment of the contract price for any extension of the delivery schedule or for any additional costs to the Government related to these tests. (d) If the Contractor fails to deliver any first article on time, or the Contracting Officer disapproves any first article, the Contractor shall be deemed to have failed to make delivery within the meaning of the Default clause of this contract. (e) Unless otherwise provided in the contract, the Contractor- (1) May deliver the approved first article as a part of the contract quantity, provided it meets all contract requirements for acceptance and was not consumed or destroyed in testing; and (2) Shall remove and dispose of any first article from the Government test facility at the Contractors expense. (f) If the Government does not act within the time specified in paragraph (b) or (c) of this clause, the Contracting Officer shall, upon timely written request from the Contractor, equitably adjust under the Changes clause of this contract the delivery or performance dates and/or the contract price, and any other contractual term affected by the delay. (g) The Contractor is responsible for providing operating and maintenance instructions, spare parts support, and repair of the first article during any first article test. (h) Before first article approval, the acquisition of materials or components for, or the commencement of production of, the balance of the contract quantity is at the sole risk of the Contractor. Before first article approval, the costs thereof shall not be allocable to this contract for (1) progress payments, or (2) termination settlements if the contract is terminated for the convenience of the Government. (i) The Government may waive the requirement for first article approval test where supplies identical or similar to those called for in the schedule have been previously furnished by the Offeror/Contractor and have been accepted by the Government. The Offeror/Contractor may request a waiver. (End of clause) AMENDMENT 1 The purpose of Amendment 1 is to provide answers to questions received. Question 1: Is a Hot Drop with standing gate vestige acceptable on top/flat surface of part? Response 1: This is acceptable as long as it does not interfere with the marking of "76" on the top surface and it meets the flashing requirements as called out on the drawing. Question 2: Are there any part markings required? If yes, can this also be standing on part top? Response 2: End Caps must be marked with "76" printed on the top surface at 1/2" high, approximately centered. Please refer to Packaging and Marking Requirements section of solicitation Question 3: Is this a bag & tag at 251 parts per bag? Response 3: There is no requirement of 251 parts per bag. Packaging must be in accordance with ASTM 3951. It is recommended to place 2,500 parts per bag in a box. AMENDMENT 2 The purpose of Amendment 2 is to extend the combined synopsis and solicitation closing date from September 13, 2022, to September 20, 2022. AMENDMENT 3 The purpose of Amendment 3 is to provide answers to questions recieved. Question 4: Will the tooling/mold need to be able to support additional part runs in the future? Response 4: The molds need to be able to support additional part runs in the future, either by Crane Army Ammunition Activity or other flare manufacturers. AMENDMENT 4 The purpose of Amendment 4 is to extend the combined synopsis and solicitation closing date from September 20, 2022, to September 23, 2022. AMENDMENT 5 The purpose of Amendment 5 is to extend the combined synopsis and solicitation closing date from September 23, 2022 to September 30, 2022 and to provide a response to a question recieved. Question 5: The material Spec on the part print shows to be a 10% glass fill that comes in a rod, plate, and bar products rather than pellets. Can you please clarify if the marterial shown on the part print is correct? Would other material work for the project? Answer 5: Other material is not acceptable. AMENDMENT 6 The Solicitation W52P1J-22-Q-76GF sections have been amended as follows: AMEND THE DESCRIPTION OF REQUIREMENT CLIN 0001 FAT End Cap; Quantity 1 Lot (LO) 1 LO = 40 pieces from each (EA) mold cavity In accordance with Drawing 3976AS118 Rev C, as found in Attachment 01. Raw material in accordance with Attachment 02 Material Specification ASTM D3935 End Cap. CLIN 0002 Mold End Cap; Quantity 1 EA In accordance with Drawing 3976AS118 Rev C, as found in Attachment 01. Raw material in accordance with Attachment 02 Material Specification ASTM D3935 End Cap. CLIN 0003 End Cap, Quantity 57,500 EA In accordance with Drawing 3976AS118 Rev C, as found in Attachment 01. Raw material in accordance with Attachment 02 Material Specification ASTM D3935 End Cap. CLIN Description Option Ordering Period 1003 Option Quantity 39,600 EA July 2023 - December 2023 2003 Option Quantity 32,000 EA January 2024 - December 2025 3003 Option Quantity 14,400 EA January 2024 - December 2025 AMEND DELIVERY AND LOCATION CLIN Description Suggested Delivery 0001 FAT End Cap 14 weeks after award 0002 Mold End Cap 14 weeks after award 0003 End Cap 10,000 per month beginning four (4) weeks after FAT approval 1003 Option End Cap Four (4) weeks after Option Award; 10,000 per month following first shipment until option complete 2003 Option End Cap Four (4) weeks after Option Award; 10,000 per month following first shipment until option complete 3003 Option End Cap Four (4) weeks after Option Award; 10,000 per month following first shipment until option complete CAAA will accept early deliveries. AMEND QUOTE/PROPOSAL SUBMISSION REQUIREMENTS Offerors shall submit the following in response to this solicitation: 1. Completed Pricing Sheet at Attachment 08. All yellow-highlighted sections shall be completed. Prices shall be stated in two (2) decimal places. 2. Complete Provision at Attachment 08, FAR 52.212-3 Alt I, paragraph (b) only. AMEND SOLICITATION PROVISIONS Add FAR 52.217-6 - Option for Increased Quantity Add FAR 52.217-9 - Option to Extend the Term of the Contract AMENDMENT 7 The Solicitation W52P1J-22-Q-76GF sections have been amended as follows: The purpose of Amendment 7 is to provide a response to a question received on Amendment 6 and update the Point of Contact (POC) for this action:. Question: Under the attachment list I do see the updated Pricing Sheet, but I do not see an update version of Attachment 7 Reps and Certs (52.212-3 Alt I) document. Response: Complete Provision at Attachment 07, FAR 52.212-3 Alt I, paragraph (b) only. All offerors must resubmit Attachment 07 with their new offer in order to be considered for award. The POC for this action will be Rachael S. Padavich, Contract Specialist, email: rachael.s.padavich.civ@army.mil. AMENDMENT 8 The purpose of this Amendment is to extend the closing date to December 21, 2022. All other terms, conditions, and provision remain the same. AMENDMENT 9 The purpose of this Amendment 9 is to provide answers to questions received. Question: Related to Part Marking. Under Packaging and Marking Requirements the solicitation states End Caps must be marked with "76" printed on the top surface at 1/2" high, approximately centered. The print does not indicate any part marking or engraving or the position of such. Can the mold be engraved (projected from surface) or embossed (recessed into surface) for the 76. part marking? Such engraving/embossing would be .007 inch to .015 inch deep, whether protruding on the part surface or recessed into the part surface. There would be no ink used on the parts. This exceeds the flash maximum acceptable but is not flash, nor sharp. (not a cut-hazard). Response: This is acceptable as long as it does not interfere with the marking of "76" on the top surface and it meets the flashing requirements as called out on the drawing. Engraving needs to be a contrasting color (white ink is used typically). Needs to be visible by a soldier who loads the countermeasure dispenser so they can see from a distance what is loaded in the dispenser. Engraving or embossing needs to meet the requirements of the drawing and will be highly visible to the soldier. All other terms, conditions, and provision remain the same. AMENDMENT 10 The purpose of this Amendment 10 is to provide answers to questions received and to extend the closing date to December 28, 2022. This Amendment also corrects an error that was in the pricing sheet. Refer to Attachment 09. Question: On the spreadsheet, In RED, there is a notation calling out 40 pieces from each mold cavity. Does this mean you are wanting a 40 cavity injection mold? Response: The number of cavities that you have in the mold is completely up to your company. We just ask that you keep in mind the suggested lead times when making that decision. The FAT requirement is 40 End Item Caps per mold cavity. For example, if your mold has two cavities, the FAT requirement is 40 each (EA) from each cavity for a total of 80 EA. All other terms, conditions, and provision remain the same.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:W52P1J22Q76GF
  1. Combined Synopsis
  1. 12×
    Combined SynopsisCurrentAug 22, 2022

    MJU76 B End Caps

    Notice 25358974e6234e64aaf7b568887dd4ad on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Reason for Amendment is to update color requirement... Amended to add Set aside code and to change PSC code. Polyurethane
-Combined Synopsis08/03/2026
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov. The RFQ number is SPMYM327Q7003. This solicitation documents and incorporates provisions and clauses in effect through FAC 2026-01 Effective Date 03/13/2026 and DFARS Change Notice 20260702. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at this address: https://www.ecfr.gov, https://www.acquisition.gov/content/list-sections-affected, and http://www.acq.osd.mil/dpap/dars/change_notices.html The FSC Code is 9330 and the NAICS code is 325211. The Small Business Standard is 1,250 employees. This requirement is being processed utilizing 100 Small Business Set Aside. Evaluation criteria is Lowest Price Technically Acceptable (LPTA). SPRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104. Offerors are required to submit descriptive literature to show how their quotation meets the required specifications. Failure to provide this information may result in your quotation being determined technically unacceptable. Only one quote per vendor will be accepted. Interested parties must fill out the required request for quote paperwork to be considered for award. It is in the attachment section and titled “RFQ SPMYM327Q7003 required”. If you are not the manufacturer, proof of traceability is required by the solicitation deadline. The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing: 0001 TORLON ROUND BAR 20 FT __________ ___________ IAW Attachment 1 0002 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____ A001 EXHIBIT A, SEQ A001 SEE EXHIBIT “A” SEQ A001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE) NOTE: OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 252.204-7016 AND INCLUDE THE COMPLETED PROVISIONS WITH THEIR OFFER. FAR CLAUSES AND PROVISIONS Clause/Provision Title 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements 52.204-7 System for Award Management 52.204-9 Personal Identity Verification of Contractor Personnel 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards 52.204-13 System for Award Management Maintenance 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law 52.209-6 Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.211-15 Defense Priority and Allocation Requirements 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services 52.212-2 Evaluation—Commercial Products and Commercial Services 52.212-4 Contract Terms and Conditions—Commercial Products and Commercial Services 52.219-6 Notice of Total Small Business Set-Aside 52.219-28 Post-Award Small Business Program Representation 52.222-3 Convict Labor 52.222-19 Child Labor—Cooperation with Authorities and Remedies 52.222-36 Equal Opportunity for Workers with Disabilities 52.222-50 Combating Trafficking in Persons 52.222-90 Addressing DEI Discrimination by Federal Contractors 52.223-11 Ozone-Depleting Substances 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving 52.232-33 Payment by Electronic Funds Transfer—System for Award Management 52.232-36 Payment by Third Party 52.232-39 Unenforceability of Unauthorized Obligations 52.232-40 Providing Accelerated Payments to Small Business Subcontractors 52.233-3 Protest after Award 52.233-4 Applicable Law for Breach of Contract Claim 52.240-90 Security Prohibitions and Exclusions Representations and Certifications **See attached clauses and provisions for full text** 52.240-91 Security Prohibitions and Exclusions **See attached clauses and provisions for full text** 52.240-93 Basic Safeguarding of Covered Contractor Information Systems **See attached clauses and provisions for full text** 52.242-15 Stop-Work Order 52.242-17 Government Delay of Work 52.243-1 Changes—Fixed Price 52.246-1 Contractor Inspection Requirements 52.247-34 F.o.b. Destination 52.252-1 Solicitation Provisions Incorporated by Reference **See attached clauses and provisions for full text** 52.252-2 Clauses Incorporated by Reference **See attached clauses and provisions for full text** 52.252-5 Authorized Deviations in Provisions **See attached clauses and provisions for full text** 52.252-6 Authorized Deviations in Clauses **See attached clauses and provisions for full text** DFARS CLAUSES AND PROVISIONS Clause/Provision Title 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 252.203-7002 Requirement to Inform Employees of Whistleblower Rights 252.203-7005 Representation Relating to Compensation of Former DoD Officials 252.204-7003 Control of Government Personnel Work Product 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support 252.204-7016 Covered Defense Telecommunications Equipment or Services--Representation 252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services--Representation 252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services 252.240-7997 NIST SP 800-171 DoD Assessment Requirements. 252.204-7022 Expediting Contract Closeout 252.204-7024 Notice on the use of the Supplier Performance Risk System 252.211-7003 Item Unique Identification and Valuation 252.215-7013 Supplies and Services Provided by Nontraditional Defense Contractors 252.223-7008 Prohibition of Hexavalent Chromium 252.225-7000 Buy American--Balance of Payments Program Certificate—Basic 252.225-7001 Buy American and Balance of Payments Program—Basic 252.225-7002 Qualifying Country Sources as Subcontractors 252.225-7012 Preference for Certain Domestic Commodities 252.225-7048 Export-Controlled Items 252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region–Representation 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports 252.232-7006 Wide Area WorkFlow Payment Instructions **See attached clauses and provisions for full text** 252.232-7010 Levies on Contract Payments 252.243-7001 Pricing of Contract Modifications 252.244-7000 Subcontracts for Commercial Products or Commercial Services 252.247-7023 Transportation of Supplies by Sea--Basic 5452.233-9001 Disputes: Agreement To Use Alternative Dispute Resolution (ADR) **See attached clauses and provisions for full text** DLA PROCUREMENT NOTES (See Attachment for Full Text) C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) C03 Contractor Retention of Supply Chain Traceability Documentation (JUN 2023) C04 Unused Former Government Surplus Property (SEP 2021) C14 Repackaging or Relabeling to Correct Deficiencies (MAY 2020) C20 Vendor Shipment Module (VSM) (MAY 2026) E05 Product Verification Testing (MAY 2020) H10 Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (MAY 2024) L06 Agency Protests (DEC 2016) L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations (JUN 2024) L09 Reverse Auction (OCT 2016) L10 Competing Individual Delivery Orders Through Reverse Auctions (OCT 2016) L31 Additive Manufacturing (JUN 2018) L39 Cybersecurity Maturity Model Certification (CMMC) CMMC Level 1 Self-Assessment Requirement for Federal Contracting Information (FCI) (NOV 2025) M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016) LOCAL CLAUSES (See Attachment for Full Text) YM3 A1: Additional Information YM3 A3: Government Purchase Card Method of Payment Additional Info (When GCPC Payment) YM3 C500: Mercury Control (Supplies) YM3 C501: Correction of Certifications YM3 C528: Specification Changes YM3 D2: Marking of Shipments YM3 D4: Preparation for Delivery YM3 D8: Prohibited Packing Materials YM3 E2: Inspection and Acceptance (Destination) YM3 E4: Disposition of Nonconforming Material YM3 E504: Notice of Constructive Acceptance Period YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard YM3 M8: Single Award for All Items (All or none procurements) This announcement will close 11 November, 2026 01:00PM EST. The Point of Contact for this solicitation is Mihaela Zouak who can be reached at Mihaela.c.zouak.civ@us.navy.mil. All responsible sources may submit a quote which shall be considered by the agency. System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/. If not the actual manufacturer the manufacturer’s name, location, and business size must be provided. Please submit quotes via email to: Mihaela.c.zouak.civ@us.navy.mil, and PNSYSupplyQuotations@us.navy.mil All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC)* or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, Paypal, etc.) Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. *If selecting GCPC as the preferred method of payment, please be advised that per DFARS 232.7002, a receiving report MUST be entered into WAWF.
-Combined Synopsis11/11/2026
*Amendment 0001 - Please review attachment 0004 - RFI reponses for changes to the solicitation and answers to questions on this solicitation. *Amendment 0002 - A statement on the permissible variations in quantities has been added to the section A narrative on the solicitation. *The permissible variation must be limited to: 5 Percent increase 5 Percent decrease This increase or decrease applies to CLINs 0001, 0002, and 1001 individually. Army Contracting Command - Rock Island (ACC-RI) has a requirement for Non-micronized Pentaerythritol in accordance with (IAW) drawing 36-1-317, Rev F. This solicitation will result in a single firm-fixed price contract that contains an Option Quantity of up to 100% of the quantity of the base year, to be evaluated at time of award. This solicitation will be issued in accordance with (IAW) Federal Acquisition Regulation (FAR) Part 13 – Simplified Acquisition Procedures as a non-commercial supply and will be awarded to the responsive, responsible, lowest priced offeror. The following Contract Line Items (CLINs) are established as follows: CLIN 0001: Non-Micronized Pentaerythritol Requirement: Shall be produced IAW drawing 36-1-317, REV F, dated 21 April 2022 (Attachment 0003) Quantity: 41,800 lbs. CLIN 0002: First Article Test (FAT) Requirement: Required prior to run of production quantity. CLIN 0002 shall be produced IAW drawing 36-1-317, REV F, dated 21 April 2022 (Attachment 0003) Quantity: 2 lbs. / 1 each OPTION: CLIN 1001: Non-Micronized Pentaerythritol Requirement: Shall be produced in accordance with (IAW) drawing 36-1-317, REV F, dated 21 April 2022 (Attachment 0003) Quantity: 41,800 lbs. 3. Please submit your quotes to Contract Specialist Austin Acree at austin.g.acree.civ@army.mil 4. Please submit any questions on or before 26 October 2026 in order to facilitate timely answering of the questions and time to post answers for all vendors.
-Solicitation11/04/2026
Proposed procurement for NSN 3990015729483 CARGO SET,VEHICLE: Line 0001 Qty 11 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0166 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis11/23/2026
The U.S. Army Corps of Engineers, Rock Island District has a requirement for the fabrication and supply of ten Fiber Reinforced Polymer (FRP) composite structures for Brandon Road Lock and Dam, Joliet, Illinois, Des Plaines River. The gates include (2) 14 X 14 ft filling valves, (2) 14 X 14 ft filling downstream bulkheads, (2) 8 X 8 ft flushing valves, (2) 8 X 8 ft flushing valve bulkheads, and (2) 16 X 16 ft dam headgates. NAICS Code: 326199 Size Standard: 750 employees 100% Small Business Set-Aside - Lowest Price Technically Acceptable A pre-proposal meeting will be held virtually via Microsoft Teams on 29 October 2026, at 2:00 PM CT. Details and access instructions can be found within the solicitation. Questions regarding this solicitation shall be submitted via ProjNet by 2:00 PM CT on 16 November 2026. See MVR.02 in the solicitation for additional information. All solicitation documents are accessible via the link below titled "PIEE Solicitation Module Link for W912EK27RA001." *Pre-proposal Meeting Slides are now included for reference in the Attachments section below.
-Solicitation11/30/2026

Additional Details

Solicitation Number

W52P1J22Q76GF

Archive Date

Jan 19, 2022

Office Address

ROCK ISLAND, IL, 61299-5000