GovChime
Notice ID: b91d7310c76864a644d46ca7e6bfdafaAward NoticeAwarded

10--Guns, over 300 mm

Awarded on September 1, 2011. Full description on SAM.gov.

Awarded tounder W56HZV11PB029 (source: SAM.gov award notice)• $43.1K

Overview

Posted
September 2, 2011
Notice type
Award Notice
Agency
Department of WarDepartment of the Army

Notice details

Office
W4GG HQ US ARMY TACOM
PSC
10: WEAPONS
Last updated
Dec 5, 2025
Award date
Sep 1, 2011
Award amount (SAM.gov award notice)
$43.1K

Identifiers

Solicitation number
W56HZV11Q0257
Notice ID
b91d7310c76864a644d46ca7e6bfdafa
Award number (PIID)
W56HZV11PB029

Description

No Description Provided

Full description on SAM.gov

Award Overview

Award Number

W56HZV11PB029

Award Amount (SAM.gov award notice)

$43.1K

Award Date

Sep 1, 2011

Awardee

Original Solicitation

Notice ID: b91d7310c76864a644d46ca7e6bfdafa

Posted Date: Sep 2, 2011

Original Response Deadline: Not specified

Contacts

Contracting Officer

Primary Contact

DANIEL ORLANDO,(586)282-2117 or LISA BEHNKE,(586)282-4502 U.S. ARMY CONTRACTING COMMAND

Documents

No documents available.

Lifecycle

Solicitation:W56HZV11Q0257
  1. Awarded

This opportunity has been awarded.

  1. Special NoticeAug 10, 2011

    10--Isolator Mounts

    Notice 208c5db289da09b28e3042ddb4b6f339 on SAM.gov

  2. AwardedCurrentSep 2, 2011

    10--Guns, over 300 mm

    Notice b91d7310c76864a644d46ca7e6bfdafa on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
ALUMINUM SHEETS
48%
Combined Synopsis11/25/2026
SALE OF SCRAP METAL TERMS AND CONDITIONS Red River Army Depot (RRAD) has approximately 21,500 lbs of Aluminum Plate. Aluminum plate is primarily 6061, various thickness, and has cut outs. For additional information on this product please contact Cody Gardner (cody.d.gardner.civ@army.mil/903-334-2347) Agreement to purchase these items shall be documented on SF 114A-C (see attached) The above scrap commodities will be sold to Buyer based on the Buyer’s index percentage price for the corresponding commodities in the AMM market index and the Buyer’s ability to accept the mentioned scrap material. Buyer shall use Aluminum scrap old aluminum sheet & cast-US (MB-AL-0370). This is an all or none sale. The buyer shall provide roll off dumpsters or flatbeds for the material to be loaded on. The buyer will be required to follow the AWCF Scrap Pickup Process listed on the next page of this purchase agreement. There shall not be any additional charges for performing the “pickup process” mentioned above. An invoice will be processed, showing the tare weight and loaded weight of roll off, and sent to the Buyer via Pay.gov. Payment in full is required, prior to scrap removal. Once payment is received the Buyer will be notified. For payment of commodities an invoice will be processed. For material loaded into rolloff(s) the tare and loaded weight will be sent to the Buyer, via Pay.Gov. Payment in full is required prior to release of commodities from RRAD. Once payment is received, the Buyer and RRAD will be notified. The buyer shall send the below information to Amanda Martin (amanda.e.martin23.civ@army.mil) or Kathy Ellis (kathy.l.ellis10.civ@army.mil): Company Name Address City, State, Zip Code Phone number Primary and alternate Email Address Payment is to be made through Pay.gov at the following address: https://www.pay.gov/public/home Instructions on how to create a Pay.gov account can be found on the website. DANGEROUS PROPERTY: Buyers are cautioned that articles or substances of dangerous nature may remain in the property regardless of the care exercised to remove same. The government assumes no liability for damages to property of the Buyer or for personal injury, disability, or death of the Buyer, its employees, or to any other person arising from or affiliated with the purchase, use or dispositions of this material. The Buyer shall hold the government harmless from all such demands, suit, actions, or claims arising from or otherwise relating to the purchase of this material. Hazardous Material Spill: The buyer shall be responsible for any spills pursuant to this agreement while on Red River Army Depot and shall immediately report any spills to the RRAD dispatch by calling 903-334-3333. The buyer agrees to expeditiously cleanup all spills or leaks in a manner that complies with all federal, state, and local environmental laws and regulations. The cleanup shall be at no cost to the government and the buyer agrees to hold the government harmless and indemnify the government for any costs incurred because of, or incidental to, any handling, removal, transportation, storage, treatment, or disposal of materials performed by the buyer or its subcontractors. In the case of imminent health and safety dangers, the government reserves the right to take immediate action to contain a spill or to otherwise minimize the threat to health and safety. The buyer shall reimburse the government for the costs incurred upon submission of a bill for its actual cost in taking such action. In the event of a spill, the buyer may request support from the installation on a cost reimbursable basis. The buyer shall have on hand and use as needed appropriate and sufficient supply of spill prevention and containment cleanup materials which are compatible with the substances they are intended to cleanup so as not to create incompatibility and hazards during spill cleanup effort. AWCF Scrap Pickup Process Takes approximately 20 mins Buyer does this To do what? Brings empty roll off Weighs truck w/empty roll off Unloads Empty Weighs Truck w/o roll off To determine empty roll off weight Loads full roll off Weighs truck with full roll off Use scale weight of full roll off for new invoice Unloads full roll off Loads a paid for roll off on truck Leaves with full paid for roll of-f
48%
Solicitation12/01/2026
ALUMINUM ALLOY SHEET
48%
Combined Synopsis10/19/2026
Railcar Spanner
48%
Combined Synopsis06/18/2026
Railcar Spanners, 80 Each, Aluminum, Required in support of the Army Power Projection Platform , Campbell Rail Operations Facility , Fort Campbell, KY Rail Spanner Specifications 1.QTY 80 each Rail Spanners a. Rail Spanners shall be capable of spanning between railcars, allowing the loading of self-propelled vehicles, towed trailers, and other rolling stock onto railcars. b. Rail Spanners shall be compatible with all military and commercial railcars. c. Axle Weight Capacity, A pair of Rail Spanners, left and right runways, shall be rated at 40,000 lbs. maximum single axle. Each individual Rail Spanner shall be rated at 20,000 lbs. maximum single/dually wheel, 24inch wide, no thicker than 4-inch tall. d. Rated Capacity: Shall be no more than 50% of failure strength at least a 2-to-1 safety factor. Failure strength is determined by the amount of weight that causes permanent deformation of the aluminum. An 80,000lb axle can be placed on a pair of Rail Spanners before any permanent deformation of the aluminum.e. Dimensional Data: 72 inches long x 24 inches wide f. Stub Toe: Each Rail Spanner will have a 2-inch-high Stub Toe or Bullnoseg. Kicker Plate Each Rail Spanner shall have the Improved Kicker Plate that utilizes aluminum tubes and 3inch tapered gussets, instead of angled aluminum. Kicker Plates made of angled aluminum will break and collapse over time, decreasing the lifespan. h. Each Rail Spanner shall have a Specifications Plate etched with the following 1 Manufacturer?s Part Number2 Vendor?s contact info email address and phone number3 Rated Capacity 4 Safety Statement: Must be supported at least 12in each end i. Rail Spanners will be fabricated by a welder certified by the American Welding Society. j. 72-inch_6 foot long by 24-inch _2 foot wide Rail Spanners shall not weigh more than 80 lbs. each.k. Material: Aluminum l.2 Person lift and placement
48%
Combined Synopsis06/12/2026

Additional Details

Solicitation Number

W56HZV11Q0257

Archive Date

Nov 8, 2011