GovChime
Notice ID: a63cbe9d21e44df284785757170bdb9eSolicitationArchived

13th ACSC Stratasys Origin Two and Stratasys F370CR 3D Printers

Archived on August 15, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
10:00 AM CDT
Posted
July 30, 2026
Notice type
Solicitation
Set-aside
No Set aside used
NAICS
333248: All Other Industrial Machinery Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.MISSION INSTALLATION CONTRACTING COMMAND.418TH CSB.0418 AQ HQ CONTRACTING SUP
Place of performance
Fort Hood, Texas, 76544
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W56ZLW26Q0021
Notice ID
a63cbe9d21e44df284785757170bdb9e

Description

This requirement is for a turnkey additive manufacturing solution to establish an organic capability for producing replacement parts at Fort Hood, TX. The acquisition includes two specific industrial-grade 3D printers, along with all necessary services for immediate and sustained operation:

- Stratasys Origin Two (Polymer Printer): An industrial-grade 3D printer utilizing programmable photopolymerization (P3/DLP) technology. It must have a minimum build volume of 192 mm x 108 mm x 370 mm and be capable of producing high-accuracy end-use parts with complex geometries

.- Stratasys F370CR (Composite-Ready Printer): An industrial-grade Fused Deposition Modeling (FDM) 3D printer specifically designed for producing composite parts. It must have a minimum build volume of 355 x 254 x 355 mm and be capable of printing with high-strength, carbon fiber-reinforced thermoplastics.

The requirement also includes turnkey installation, configuration, and calibration of all equipment; manufacturer led on-site training for operators; all necessary software licenses and initial consumables; and a comprehensive warranty and technical support package. Training shall be scheduled and conducted only after the printer has been fully installed, calibrated, and verified as operational. Training includes but not limited to system operation, job setup, maintenance, and troubleshooting.

All questions must be submitted in writing to the POCs listed below no later than 10:00 am (CST), 31 July 2026. komlan.e.dougah.mil@army.mil

austin.c.sanderson.mil@army.mil

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (2)

  • 3D Printer_RFO MFR_Limiting_Competition_under_SAT_Redacted.pdf

    512 KBAdded in Solicitation version 5Posted
    Download
  • Solicitation - W56ZLW26Q0021.pdf

    3.7 MBAdded in Solicitation version 1Posted
    Download

Lifecycle

  1. 1
    Version 1SolicitationArchived

    13th ACSC Stratasys Origin Two and Stratasys F370CR 3D Printers

    Notice 22a32e87ab084957ab05717f1743d478 on SAM.gov

  2. 2
    Version 2SolicitationCancelledArchived

    13th ACSC Stratasys Origin Two and Stratasys F370CR 3D Printers

    Notice e87fe46298d94dadb85738ca24864bce on SAM.gov

  3. 3
    Version 3SolicitationArchived

    13th ACSC Stratasys Origin Two and Stratasys F370CR 3D Printers

    Notice 8b3b21aacd0e40949622caa35f22c490 on SAM.gov

  4. 5
    Version 5SolicitationArchivedCurrent

    13th ACSC Stratasys Origin Two and Stratasys F370CR 3D Printers

    Notice a63cbe9d21e44df284785757170bdb9e on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Naval Air Warfare Center Weapons Division (NAWCWD) China Lake, CA awarded a Firm Fixed Price Purchase Order to Lithoz America, whose quote was evaluated to provide best value to the government. The total contract value is $775,972.00 and will provide for future capability for ceramic-based composite materials research, development, testing, processing, and production.
68%
AwardedOpen
This solicitation amendment 0001 adds clause 252.225-7013 (Duty-Free Entry) in response to a question received during the question period. No additional questions were submitted, and the government now considers the question period closed. This solicitation is for a lithography-based ceramic manufacturing (LCM) multi-material 3D printer in support of current and future capability for ceramic-based composite materials research, development, testing, processing, and production. The LCM 3D printer will produce ceramic composite test articles and small-scale proof of concept parts. This printer shall be a standalone, enclosed printer unit having two interior rotating vats, a route for material dispersion and cleaning, an integrated build platform, an integrated light source, relevant print file preparation software, and integrated GUI controls. For more details, please see the solicitation posting in the Procurement Integrated Enterprise Environment (PIEE) at the following: https://piee.eb.mil/sol/xhtml/unauth/search/oppMgmtLink.xhtml?noticeId=N6893626Q5096&noticeType=SolicitationNotice Contractors are expected to submit quotes via PIEE to be considered for this requirement.
68%
Solicitation03/09/2026
This Amendment (1) updates the estimated posting of the RFQ to “on or around February 9th 2026”. The Weapons and Energetics Department of Naval Air Weapons Center Weapons Division (NAWCWD) China Lake intends to seek sources for a lithography-based ceramic manufacturing (LCM) multi-material 3D printer in support of current and future capability for ceramic-based composite materials research, development, testing, processing, and production. The LCM 3D printer will produce ceramic composite test articles and small-scale proof of concept parts. This printer shall be a standalone, enclosed printer unit having two interior rotating vats, a route for material dispersion and cleaning, an integrated build platform, an integrated light source, relevant print file preparation software, and integrated GUI controls. The solicitation or Request for Quote (RFQ) will be posted in Contract Opportunities on the SAM website at https://sam.gov/ on or around February 9th 2026 Interested firms must be registered in the System for Award Management (SAM) database at https://sam.gov/ to start doing business with the federal government.
68%
Pre-Solicitation02/09/2026
DESCRIPTION The Weapons and Energetics Department of Naval Air Weapons Center Weapons Division (NAWCWD), China Lake, California intends to procure a lithography-based ceramic manufacturing (LCM) multi-material 3D printer in support of current and future capability for ceramic-based composite materials research, development, testing, processing, and production. The LCM 3D printer will produce ceramic composite test articles and small-scale proof of concept parts. This printer shall be a standalone, enclosed printer unit having two interior rotating vats, a route for material dispersion and cleaning, an integrated build platform, an integrated light source, relevant print file preparation software, and integrated GUI controls. PROCUREMENT TYPE Per FAR 6.102(b), this procurement is anticipated to use competitive procedures under full and open competition and result in a Firm Fixed Price (FFP) single award contract. OTHER INFORMATION Interested firms must be registered in the System for Award Management (SAM) database at https://sam.gov/ and PIEE at https://piee.eb.mil/ to start doing business with the federal government. This notice of intent is not a request for competitive proposals and responses are not requested. This posting serves as notice that the anticipated solicitation or Request for Quote (RFQ) will be posted in Contract Opportunities on the SAM website at https://sam.gov/ on or about 27 January 2026.
68%
Pre-Solicitation01/27/2026
The Weapons and Energetics Department of Naval Air Weapons Center Weapons Division (NAWCWD) China Lake intends to seek sources for a lithography-based ceramic manufacturing (LCM) multi-material 3D printer in support of current and future capability for ceramic-based composite materials research, development, testing, processing, and production. The LCM 3D printer will produce ceramic composite test articles and small-scale proof of concept parts. This printer shall be a standalone, enclosed printer unit having two interior rotating vats, a route for material dispersion and cleaning, an integrated build platform, an integrated light source, relevant print file preparation software, and integrated GUI controls. This notice of intent is not a request for competitive proposals; however, any firm believing it can fulfill the requirement identified above may submit a written response to be received at the Contracting Office no later than the due date contained in this notice, which shall be considered by the agency. The written response shall reference solicitation number contained in this notice and provide a capability statement that clearly indicates the firm’s experience, assets, background, and ability to perform the required work without compromising the quality, accuracy, reliability, and schedule.
68%
Market Research12/17/2025

Additional Details

Solicitation Number

W56ZLW26Q0021

Archive Date

Aug 15, 2026

Office Address

FORT HOOD, TX, 76544